It has been now 3 days till my kaiser's problem with 3G.....and only 3G.
it works fine when changing band to GSM but on 3G no service or service ok but no dialling process succeded....
notes:
1- i changed my radio tried 1.65 & 1.70 still same problem.
2- i changed my entire rom (6.0,6.1 & 6.5) still same problem.
3- i changed my sim with new one same problem.
4- i changed my network operator from etisalat to vodafone, still same problem.
5- i tried in different locations with N95 in other hand to check network.
Questions:
1- Does it hardware issue or software issue?
2- If software what is the solution?
3- If Hardware..does anyone had this issue and get it solved and.... for how much?....and does it happened again after fixing....as i read that it is expensive to fix...and it will happen again.
PLEASE HELP ME!!!!!
Please don't cross/double post; it's against forum rules.
Thread closed.
Related
Hi guys,
I've got an AT&T branded HTC 8900 (tytn II, kaiser, what else).
Using it in Italy, with 3G provider (Wind).
I've updated it with Dutty V3. and radio i tried 1.27.12.11, -.17, -11.31... and my 3G (neither GPRS) connection doesn't work. When i try to connect the modem suddenly i get the “The answering modem has disconnected” than the “There is a problem connecting to the GPRS service in to your registered home network” messages.
Before the update, the modem had worked fine with 3G connection, with original AT&T ROM.
Any suggestion?
TNX
ALEX
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Brevi said:
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Click to expand...
Click to collapse
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Did you try disabling HSDPA?
Fixed!
duttythroy said:
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Click to expand...
Click to collapse
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Thanks Dutty! I tried your suggestion. I think it's a little better now but I still think the connection was more responsive in No.7 Rom. For example, when I log on to ICQ with IM+ it used to go straigt to a green "connected" icon. With v3 i get a yellow "connecting" icon for about 15 seconds and then the green one.
My new Sim card just got activated, but made no difference.
It's not that big of a deal for me, as my connection basicaly works.
I will test connection stabilty in he next couple of days.
Other than that v3 is great!! Thank you Dutty!
Are you planning on releasing a new Rom anytime soon?
Have a nice relaxing weekend Dutty!
eiem said:
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Click to expand...
Click to collapse
Sweet!!!, I was having problems not being able to access the internet via PIE, but could using Opera...it was driving me Bonkers!!. This worked..
However, i'm still not able to access tom tom plus server!!, any ideas?
Hi! I reflashed v3 and everything seemed fine again. However I now have a problem where I can't call or receive calls when on UMTS. All is fine when I am on GSM.
I tried Alex's Multimedia Rom (1.56)...same story there.
I now flashed the HTC Rom that came with my Tytn II and so far (2 hours including several test calls) everything seems normal again. Will try to flash v3 again maybe tonight.
Starting to see everything in tricolor ;-)
Greetings from Aachen, Germany
Brevi
Nope problems catched up again...does anybody know, if it is better to remove the sim and/or turn off the phone radio before flashing radio roms?
Thanks! Brevi
Dear all,
maybe this is the same problem?
http://forum.xda-developers.com/showthread.php?t=335074
Is the hidden proxy also installed in a vodafone Rom?
Thnx Max
sounds familar
hi,
please see other posts by me(any way to link these threads moderators?) for other threads with similar issues. To clarify, if you revert back to your original rom, your 3G and phone calls work again? I started having problems with my 3G and phone functions about a week after I got my AT&T tilt..but after I changed to one of dutty's roms.
If I disable 3G via the comm manager, all works well, voice and data etc, but I can only do edge speeds. Unfortunately, I live 15 miles from the nearest 3G area so its hard fo me to experiment with roms and settings.
Also, to confuse things even more, one 3G area will still work for me while the network closer into to the Boston metro area won't, leading me to think that a network provisioning upgrade in the Boston area may be looking for something in the original AT&T rom that is now gone. I'm hoping not and that a phone upgrade or mother board swap will fix it(as others are reporting). I should do a revert back to the original rom and drive to my "test" area and see if 3G comes back...that would suck if it does...the stock roms are awful and about 5 years behind the time as far as user interface...like my old Ipaq.
I really like the dutty roms and may just live with edge speeds(dutty a donation will be forth coming once I settle in on a solution dude ).
rich
I guess I tried everything by now...diffrent roms including HTC stock rom, radios, flashing radio with sim in/out.
But the problem always comes back.
About to call HTC support and send my Kaiser in for repair.
Hope it won't take too long, I am addicted to this fine device.
Already charged my old Hermes today. Oh my god the Kaiser is sooo much better compared to the Hermes it almost made me laugh ;-)
After upgrading my Tornado (O2 XDA Phone) to WM6 I have had problems with Radio. I use a analog Dual Sim, so I turn Flight Mode on and off to switch between the two Sim Cards. But after upgrading, when I switch to one certain of the two sims, it logs onto the GSM network but I'm unable to do phone calls, send sms etc. I have to reboot to get back GSM functionality. Further more, GPRS connection with this sim is impossible all the time, even after rebooting ("the remote party has ended this connection"). With the otcher sim, everything is allright and with another phone with WM5 everything works with both sim cards.
If searched and tried all combinations of different ROMs and Radio versions, but nothing helped, even downgrading to WM5 didn't (I think the original Radio wasn't included in the WM5 Rom).
Has anybody a clue, how to get it working?
u should be update gsm(radio version) to more lvl,i think.
i am is 4.1.13.28 now. have NOT any problem.
i have same problem("the remote party has ended this connection") too when use 4.0.13.20
check ur radio version.........
in setting/other/about...
Will this radio work with Qtek 8310? And where did you find it?
Lovetz said:
Will this radio work with Qtek 8310? And where did you find it?
Click to expand...
Click to collapse
i dont know that the radio can work or NOT on Qtek .
u can find it by:http://forum.xda-developers.com/showthread.php?t=324557
it in Step 10。
Thanks, I'm use the same version.
Thanks for your answer, but I'm allready using 4.1.13.28_02.61.01
hi,
i've a big big problem. i made the official upgrade to WM6.1 for my tytn II (italian) but once finished it was set under HSDPA. I disabled HSDPA and i turned to 3G.
with the old rom (official wm6) i disabled 3G by setting GSM following this path:
Comm manager -> options -> phone -> banda (i don't know the english translation, i think is band). under that panel i selected GSM and the phone turned to GSM, with G icon in the home screen
if i do the same thing with the new rom the phone freeze, and 10-15 seconds after a message says: cant switch band, try later.
i tried many times but the problem remains, i also tried to install the rom update again and again.
can you help me? 3G doesn't work fine where i live, so it's important to set GSM
someone told me that changing the radio rom (it has the original one) can solve the problem, can you give me some advice?
thanks
Same thing happened to me, restarted and tried again and it worked.
kobjing said:
someone told me that changing the radio rom (it has the original one) can solve the problem, can you give me some advice?
thanks
Click to expand...
Click to collapse
different radios yeild different signal strengths depending on location. try different wm6.1 radios and see if there is one that gives you better connection strength. go here for a list of radios:
http://forum.xda-developers.com/showthread.php?t=393182
Hi guys, just flashed my first ROM and everything appears as it should phone wise except for the fact I have no service at all for my network (o2).
I am quite worried, i have already run the connection setup and restarted my device but nothing
When i flashed, i used the Polaris_WWE_0[1].67_Premium_bepe rom and Polaris_Radio_1.58.21.23
Please help quickly!
Have you tried reflashing or a hard reset to see if this solves the problem?
Sorted now!
I reflashed the radio ROM with a new version - still no luck.
Then i noticed a thread about problems with handsets in Russia receiving no signal after a re-flash and i downloaded a Radio that was suggested there.
Now my signal is back to normal!!!
Did the 02 customization run once you flashed the orbit 2, as I have flashed mine a few time and the customization run every time.
If it didnt I have the universal installer for putting the 02 setting back on.
Let me know.
Also have you checked in the Settings / Phone / Network for Network Selection should be on Automatic....
Gster
Hi thanks for your reply.
I dont know if you saw my above message but i got everything working ok, it was to do with the radio i installed. Basically it wasn't allowing me to pick up an O2 signal. I could find Orange and Vodafone though. I assume that the particular radio caused a weak signal in the UK and O2 coverage in my area must be quite poor.
When i installed the radio mentioned in the thread about Russian poor recpetion everything was good.
In my case the o2 customization did not run when i reflashed but maybe that was coincidental because i ran it manually and still no good.
I would be interested in having the universal installer to reset back to O2 just incase.
Would you be able to upload for me?
no service on o2
i have the same problem - what is the radio file that is recommended to flash?
Hi all,
I have a problem with my Qtek 2020/Himalaya/PH10B displaying no service and not gaining any signal what so ever. I flashed it with Ather's Windows Mobile 6.1 Dark Edition. The signal still didn't work even then! I updated the radio from 1.14 to 1.17 and still the same problem, stuck another working sim in my current phone and still nothing! used different working network sims and still nothing. it's a clean install meaning no apps apart from what came with the Operating System.
another note, radio is enabled but the signal bar at the top right shows an Explanation mark where the level of signal should be
Please can anyone help me with this issue?
< Info >
ROM date: 06/29/2008
ROM Version : 6.1.0.00SA
Radio: 1.17.0
Protocol: 1337.24
------------------------
Thanks
sounds like a hardware malfunction with the sim slot in the phone
Thanks for the reply Rudegar,
It ask for the sim's pin number upon startup, i'm able to browse my sim's contact's? so it can't be the sim slot that's the problem?
bump
please guys? does someone know a solution? i've searched google and the forums and i've yet to find an answer to my problem