HELP! Flashed O2 Orbit 2 but now No Service! - Touch Cruise General

Hi guys, just flashed my first ROM and everything appears as it should phone wise except for the fact I have no service at all for my network (o2).
I am quite worried, i have already run the connection setup and restarted my device but nothing
When i flashed, i used the Polaris_WWE_0[1].67_Premium_bepe rom and Polaris_Radio_1.58.21.23
Please help quickly!

Have you tried reflashing or a hard reset to see if this solves the problem?

Sorted now!
I reflashed the radio ROM with a new version - still no luck.
Then i noticed a thread about problems with handsets in Russia receiving no signal after a re-flash and i downloaded a Radio that was suggested there.
Now my signal is back to normal!!!

Did the 02 customization run once you flashed the orbit 2, as I have flashed mine a few time and the customization run every time.
If it didnt I have the universal installer for putting the 02 setting back on.
Let me know.
Also have you checked in the Settings / Phone / Network for Network Selection should be on Automatic....
Gster

Hi thanks for your reply.
I dont know if you saw my above message but i got everything working ok, it was to do with the radio i installed. Basically it wasn't allowing me to pick up an O2 signal. I could find Orange and Vodafone though. I assume that the particular radio caused a weak signal in the UK and O2 coverage in my area must be quite poor.
When i installed the radio mentioned in the thread about Russian poor recpetion everything was good.
In my case the o2 customization did not run when i reflashed but maybe that was coincidental because i ran it manually and still no good.
I would be interested in having the universal installer to reset back to O2 just incase.
Would you be able to upload for me?

no service on o2
i have the same problem - what is the radio file that is recommended to flash?

Related

GPRS dies until radio restart (v1240 - ericjm WM6 ROM - Vodafone UK)

Hi all,
I've got a Vodafone (UK) v1240 (HTC Tornado Noble variant) running ericjm WM6 For Tornado - HTC Edition ROM and GSM.02.61.01 / SPL.2.00.0014.
Every day or two, the 'G' symbol disappears from the bar at the top of the Home screen and doesn't return. GPRS is unavailable until I use the connection manager to turn the radio off and back on again.
This is *really* annoying as I use push email on a daily basis and often find ActiveSync in 'waiting for network' mode, even though I'm in an area with a good signal.
I've tried the registry hack of setting GRPS to 'Always on' and renaming the 'SuspendResume' registry value - but that doesn't seem to help this issue.
I've seen a few other grumbles on this forum and around the www about this issue - but no firm solutions. Can anyone shed any light on this - or suggest a fix?
the GPRS issue is fixed with the latest radio ROM update, did you run phil's WM6GSMUpdate? If not, get it from my tutorial in my signature
Thanks for the response karhoe.
I did apply WM6GSMUpdate while following an install guide similar to yours for ericjm's WM6 For Tornado - HTC Edition ROM.
I'll try re-applying it, but I believe it is already in effect as my radio version states: 4.1.13.28_02.61.01
Any other ideas?
Try this
I have the same problem when i use andot's ROM. I have also upgraded the radio to 4.1.13.28_02.61.01, but still not solved.
Finally, after i change my ROM to NiTroGenious' WM6 English 5.2.1616.18120 ROM, and upgraded my SPL to 2.00.0014, the problem has been solved. I am not sure whether is the ROM or SPL solve the problem.
If you want to upgrade your SPL, please find the link under NiTroGenious's signatures.
One thing I have seen even in my own phone (running VJs ROM v3.2) that depending on what's being refreshed on my home screen, the "E" symbol will disappear. In that case, it's not that my GPRS connection has dropped, it's just that the top bar isn't refreshing to display the symbol. If I force a home screen refresh, lo and behold it's back again. Could that be what's happening with you?

Dutty V3 + RADIO ... 3G failure

Hi guys,
I've got an AT&T branded HTC 8900 (tytn II, kaiser, what else).
Using it in Italy, with 3G provider (Wind).
I've updated it with Dutty V3. and radio i tried 1.27.12.11, -.17, -11.31... and my 3G (neither GPRS) connection doesn't work. When i try to connect the modem suddenly i get the “The answering modem has disconnected” than the “There is a problem connecting to the GPRS service in to your registered home network” messages.
Before the update, the modem had worked fine with 3G connection, with original AT&T ROM.
Any suggestion?
TNX
ALEX
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Brevi said:
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Click to expand...
Click to collapse
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Did you try disabling HSDPA?
Fixed!
duttythroy said:
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Click to expand...
Click to collapse
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Thanks Dutty! I tried your suggestion. I think it's a little better now but I still think the connection was more responsive in No.7 Rom. For example, when I log on to ICQ with IM+ it used to go straigt to a green "connected" icon. With v3 i get a yellow "connecting" icon for about 15 seconds and then the green one.
My new Sim card just got activated, but made no difference.
It's not that big of a deal for me, as my connection basicaly works.
I will test connection stabilty in he next couple of days.
Other than that v3 is great!! Thank you Dutty!
Are you planning on releasing a new Rom anytime soon?
Have a nice relaxing weekend Dutty!
eiem said:
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Click to expand...
Click to collapse
Sweet!!!, I was having problems not being able to access the internet via PIE, but could using Opera...it was driving me Bonkers!!. This worked..
However, i'm still not able to access tom tom plus server!!, any ideas?
Hi! I reflashed v3 and everything seemed fine again. However I now have a problem where I can't call or receive calls when on UMTS. All is fine when I am on GSM.
I tried Alex's Multimedia Rom (1.56)...same story there.
I now flashed the HTC Rom that came with my Tytn II and so far (2 hours including several test calls) everything seems normal again. Will try to flash v3 again maybe tonight.
Starting to see everything in tricolor ;-)
Greetings from Aachen, Germany
Brevi
Nope problems catched up again...does anybody know, if it is better to remove the sim and/or turn off the phone radio before flashing radio roms?
Thanks! Brevi
Dear all,
maybe this is the same problem?
http://forum.xda-developers.com/showthread.php?t=335074
Is the hidden proxy also installed in a vodafone Rom?
Thnx Max
sounds familar
hi,
please see other posts by me(any way to link these threads moderators?) for other threads with similar issues. To clarify, if you revert back to your original rom, your 3G and phone calls work again? I started having problems with my 3G and phone functions about a week after I got my AT&T tilt..but after I changed to one of dutty's roms.
If I disable 3G via the comm manager, all works well, voice and data etc, but I can only do edge speeds. Unfortunately, I live 15 miles from the nearest 3G area so its hard fo me to experiment with roms and settings.
Also, to confuse things even more, one 3G area will still work for me while the network closer into to the Boston metro area won't, leading me to think that a network provisioning upgrade in the Boston area may be looking for something in the original AT&T rom that is now gone. I'm hoping not and that a phone upgrade or mother board swap will fix it(as others are reporting). I should do a revert back to the original rom and drive to my "test" area and see if 3G comes back...that would suck if it does...the stock roms are awful and about 5 years behind the time as far as user interface...like my old Ipaq.
I really like the dutty roms and may just live with edge speeds(dutty a donation will be forth coming once I settle in on a solution dude ).
rich
I guess I tried everything by now...diffrent roms including HTC stock rom, radios, flashing radio with sim in/out.
But the problem always comes back.
About to call HTC support and send my Kaiser in for repair.
Hope it won't take too long, I am addicted to this fine device.
Already charged my old Hermes today. Oh my god the Kaiser is sooo much better compared to the Hermes it almost made me laugh ;-)

Problem with Windows Mobile 6.1 official upgrade

hi,
i've a big big problem. i made the official upgrade to WM6.1 for my tytn II (italian) but once finished it was set under HSDPA. I disabled HSDPA and i turned to 3G.
with the old rom (official wm6) i disabled 3G by setting GSM following this path:
Comm manager -> options -> phone -> banda (i don't know the english translation, i think is band). under that panel i selected GSM and the phone turned to GSM, with G icon in the home screen
if i do the same thing with the new rom the phone freeze, and 10-15 seconds after a message says: cant switch band, try later.
i tried many times but the problem remains, i also tried to install the rom update again and again.
can you help me? 3G doesn't work fine where i live, so it's important to set GSM
someone told me that changing the radio rom (it has the original one) can solve the problem, can you give me some advice?
thanks
Same thing happened to me, restarted and tried again and it worked.
kobjing said:
someone told me that changing the radio rom (it has the original one) can solve the problem, can you give me some advice?
thanks
Click to expand...
Click to collapse
different radios yeild different signal strengths depending on location. try different wm6.1 radios and see if there is one that gives you better connection strength. go here for a list of radios:
http://forum.xda-developers.com/showthread.php?t=393182

sudden problem with softbank connection. Why?

Hmm I just got back to Kyoto from a trip to New Zealand and found that my phone will no longer connect with the opensoftbank connection. THE PHONE CAN BE USED AS NORMAL. Anyway, when connecting to the internet, I get the following error:
"Dialed : open.softbank.ne.jp. Cannot connect for an unknown reason"
Neither installing of the connection .cab or the wifiwake method , with the correct wifiwake, nor even putting the password in by hand, worked. I have tried several different roms. Of course, I did the usual and checked the connection to make sure password was actually inputed, etc. Anyway, I am sure I know what I am doing since I have been doing this since the Hermes; and remember, the think worked before leaving Japan.
So, I thought perhaps I had a phone problem. Well it appears not. Installing the original softbank rom works! Anybody else had any similar issues of late? Strange indeed.
UPDATE: On the original Japanese ROM I deleted the original settings (which are hidden by the way) and manually put the opensoftbank settings in and all still worked. Now, get this: I installed jmckeejr's Chrome 23037_Beta2 and even put in the autosettings (the vodafone [email protected]) just to see if it would let me connect... it did not. SO, neither the old vodafone nor the softbank open settings appear to work. Damn, makes me think softbank have clamped down on us, somehow... Anyone got any good ideas, please let me know.
Softbank seems to have stopped service to my phone this morning as well. It was fine yesteday, I've been paying my bills and using the data connection very modestly.
For me, however, it's not only the data connection that won't work anymore but I can't even make phone calls. I reinstalled the 6.1 official Softbank rom and this didn't help the problem. Something strange is going on here.
Hi Jonathan. I hope you could solve your problem. I solved mine by installing the latest NRGZ28 EnergyRom Warhawk. It worked fine. It seems that some of the later roms than this (released around end of Aug/beginning of Sep) do not work with softbank's connection settings.
I will do a little more poking around to see if I can find out any more information as to what may be causing the problem, as at the moment it is all a mystery to me. Cheers.

3G Radio not working?

Ive been using NRG roms since I got my fuze, and had good luck with the warhawk and later genisis 9/6 build. Since upgrading to the genisis 9/20 build its all went down hill and now no matter what rom I run I get the same issues.
It will show H in the title bar and anywhere from 1-3 bars inside my house and as soon as I try to open a webpage I get the circle around the signal bar and it drops signal. Also my phone will go hours without any connection or signal at all until I either restart it, or turn off 3g.
With 3g disabled everything is fine, I can browse the internet and for the most part I keep service.
Right after I first upgraded to the 9/20 build I also flashed my radio to the 1.14.25.35 from the 1.14.25.05 that NRG reccomended for the rom, as well as ran the riphone.cab for the radio. Ive since reverted back to the 9/6 build and 1.14.25.05 radio and the problem persists. I have also tried the 1.02.25.32 radio with the same issues.
When I can get internet over 3g it doesnt last very long and times out quite frequently. Anyone else having problems with data transfers over 3g?
Do you ever flash back to stock ROM in between flashes?
That will likely resolve your issue.
No Ive never flashed back to the stock rom
I would strongly suggest it.
Otherwise you'll spend hours troubleshooting an issue that is actually caused by your previous flash.
alright I found one, Ill give it a try for a day or so and see how things go. Thanks
If the stock ROM fixes your issue, you just have to remember to flash it before you flash a cooked ROM and always Hard reset between each.
I just go the stock rom flashed, its still dropping connection most of the time I open it even tho it says I have 2 bars signal with H. As soon as I update weather it switches to 3g shows signal then switches to Edge then disconnects.
Before I flashed the stock rom I tried a clean flash of the nrg genisis rom and flashed the radio to 1.14.25.35 as well as installed the cab file for the rilphone and it wouldnt even attempt to make a date or phone connection until I uninstalled the rilphone dll.

Categories

Resources