Ive been using NRG roms since I got my fuze, and had good luck with the warhawk and later genisis 9/6 build. Since upgrading to the genisis 9/20 build its all went down hill and now no matter what rom I run I get the same issues.
It will show H in the title bar and anywhere from 1-3 bars inside my house and as soon as I try to open a webpage I get the circle around the signal bar and it drops signal. Also my phone will go hours without any connection or signal at all until I either restart it, or turn off 3g.
With 3g disabled everything is fine, I can browse the internet and for the most part I keep service.
Right after I first upgraded to the 9/20 build I also flashed my radio to the 1.14.25.35 from the 1.14.25.05 that NRG reccomended for the rom, as well as ran the riphone.cab for the radio. Ive since reverted back to the 9/6 build and 1.14.25.05 radio and the problem persists. I have also tried the 1.02.25.32 radio with the same issues.
When I can get internet over 3g it doesnt last very long and times out quite frequently. Anyone else having problems with data transfers over 3g?
Do you ever flash back to stock ROM in between flashes?
That will likely resolve your issue.
No Ive never flashed back to the stock rom
I would strongly suggest it.
Otherwise you'll spend hours troubleshooting an issue that is actually caused by your previous flash.
alright I found one, Ill give it a try for a day or so and see how things go. Thanks
If the stock ROM fixes your issue, you just have to remember to flash it before you flash a cooked ROM and always Hard reset between each.
I just go the stock rom flashed, its still dropping connection most of the time I open it even tho it says I have 2 bars signal with H. As soon as I update weather it switches to 3g shows signal then switches to Edge then disconnects.
Before I flashed the stock rom I tried a clean flash of the nrg genisis rom and flashed the radio to 1.14.25.35 as well as installed the cab file for the rilphone and it wouldnt even attempt to make a date or phone connection until I uninstalled the rilphone dll.
Related
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Hi
I have the same Rom and the same Problem, no Wifi reconnect.
It has been stated by the cook 'its Right' at the first page of TNT.1933 that "
- Some of roms have the issue with cannot open the wifi from the first time"
maybe by reflashing or flashing the other versions of TNT .1933 solve this problem,no harm in trying.
it seems to be a problem with every wm6 rom i have used. I can connect fine to my apartments router but other places i could normally connect to very easily with wm5, i now cannot with wm6. Anyone else have this problem?
edit: this is not a problem with it connecting directly, it will not even connect manually or even show that a certain wireless network is in range even though i know that it is. I have reflashed to the same result
spencepu3 said:
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Click to expand...
Click to collapse
Use the .318 build (Jaguar, XM6, Loon kitchen). Thats the only build that does not have this problem in WM6, all the other builds have the problem.
WiFi problems w/1933
I think I've had exactly the same problems w/several TNT versions after TNT4 which worked OK. Also similar problems with
I have NOT had a problem w/WiFi using NBD 9.2 which has worked for several weeks now w/o hitch! NBD 9.2 is (relative to 1933) thin on applications so U have to track down the cabs and load. That is why I tried 1933 recently. No wifi so I went back to 9.2.
Good luck,
Jim
Cingular 8125 G3
NBD 9.2
SIM and CID unlocked
Radio 2.69.11 w/fix
I just met this for the very first time. Then it worked normaly. TNT5.0
Hi all.
An unusual issue - where previously I had nothing but H and 3G, after flashing several roms, I am STUCK on Edge, no matter which Rom I flash. I started with Sleuth's 1.0, and was on 1.27.12.11 - nothing but H's...sweet.
I then moved to Dutty's new Tilt Cube Rom - and voila, with the upgrade to this rom and the newest Radio - nothing but Edge, all day.
So, I tried both lower radio versions on Dutty's...nothing. I reflashed Sleuth and tried it with three radios...NOTHING.
I am stuck on Edge..and it is HELL!!!
Is there someone way to "radio brick" your device, as silly as that may sound? Or can you BURN out the 3g receptor or something? THis sounds silly to me, but I am out of ideas. Cingular claims no outages in NY..and this occured in all of Manhattan and P. Slope, Brooklyn...thoughts?!?!?
Nothing?
come on....somebody has got to have a thought....my only thinking is to flash a factory rom or send the fone back..but that means its hardware ...and if I have edge, that seems unlikely, right?
No H or 3G?
gfhii said:
Hi all.
An unusual issue - where previously I had nothing but H and 3G, after flashing several roms, I am STUCK on Edge, no matter which Rom I flash. I started with Sleuth's 1.0, and was on 1.27.12.11 - nothing but H's...sweet.
I then moved to Dutty's new Tilt Cube Rom - and voila, with the upgrade to this rom and the newest Radio - nothing but Edge, all day.
So, I tried both lower radio versions on Dutty's...nothing. I reflashed Sleuth and tried it with three radios...NOTHING.
I am stuck on Edge..and it is HELL!!!
Is there someone way to "radio brick" your device, as silly as that may sound? Or can you BURN out the 3g receptor or something? THis sounds silly to me, but I am out of ideas. Cingular claims no outages in NY..and this occured in all of Manhattan and P. Slope, Brooklyn...thoughts?!?!?
Click to expand...
Click to collapse
Are you actually getting only Edge connect speed? (Check with DSLReports.com) Or is it just the icon that's misbehaving?
Try running Schap's Advanced configuration tool, and tick the box "Enable HSDPA icon" - see if that might reset the icon.
Get a load of this -
out of noweher, 3G/H just returned. What a crock. Now I will reload the Cube Rom and try again.
As an aside, with 1MB speed test I got the following results, tried 3 times:
1. 378 kbit/sec speed, .498 latency
2. 493kbit/sec, .546 latency
3. 448 kbit/sec, .678 latency
Does that seem a bit slow to anyone else?
Thanks to all, but what can you do sometimes?
------------
UPDATE:
Re-installed Dutty's Cube Rom, gave it a few resets, and guess what -
EDGE! No more 3G, No more H - So, I rerun the speed test from DSL reports.com and here is what we get:
1. 156kbit/ .753 latency
Yup, thats Edge all right.
So, any thoughts? There is clearly a software/radio issue here, and I am in NYC where reception is good.
Hi guys, just flashed my first ROM and everything appears as it should phone wise except for the fact I have no service at all for my network (o2).
I am quite worried, i have already run the connection setup and restarted my device but nothing
When i flashed, i used the Polaris_WWE_0[1].67_Premium_bepe rom and Polaris_Radio_1.58.21.23
Please help quickly!
Have you tried reflashing or a hard reset to see if this solves the problem?
Sorted now!
I reflashed the radio ROM with a new version - still no luck.
Then i noticed a thread about problems with handsets in Russia receiving no signal after a re-flash and i downloaded a Radio that was suggested there.
Now my signal is back to normal!!!
Did the 02 customization run once you flashed the orbit 2, as I have flashed mine a few time and the customization run every time.
If it didnt I have the universal installer for putting the 02 setting back on.
Let me know.
Also have you checked in the Settings / Phone / Network for Network Selection should be on Automatic....
Gster
Hi thanks for your reply.
I dont know if you saw my above message but i got everything working ok, it was to do with the radio i installed. Basically it wasn't allowing me to pick up an O2 signal. I could find Orange and Vodafone though. I assume that the particular radio caused a weak signal in the UK and O2 coverage in my area must be quite poor.
When i installed the radio mentioned in the thread about Russian poor recpetion everything was good.
In my case the o2 customization did not run when i reflashed but maybe that was coincidental because i ran it manually and still no good.
I would be interested in having the universal installer to reset back to O2 just incase.
Would you be able to upload for me?
no service on o2
i have the same problem - what is the radio file that is recommended to flash?
Can someone explain the nature of the reboots that they are experiencing? I had a reboot on Friday but it was much more then just a reboot, after the phone was finishing powering back up I had no ability to call out as if there was no service. I tried numerous battery pulls and even had Verizon do a reset on there end, nothing helped yet I was still able to receive and send data. Finally after about an hour my service was back. Then the same thing happened again yesterday, I went through the same processes with no success yet. I have tried all the different radio choices and nothing is working, does anyone have any suggestions?
Thanks!!!
Also I am rooted and using the stock rom
Bump..........
Did you do any radio flashes? I know mine rebooted on me when I was trying to flash the GB leak from yesterday and there wasn't even a signal bar...just blank space. I reflashed my radio and everything was ok.
Edit: read the last line that I missed before. I am assuming if you are on a stock rom that you didn't flash any radios (otherwise it would have been noted). Thats the only thing that I have run across causing issues. SMH
Yes, I had similar problem
I was running the Stripped Das BAMF with the new radio (same as the one that recently came out OTA) and had this no service problem twice. Since I'm in a 3G only area, I have been using CDMA auto(PRL) and use the Phoneinfo app to change it. I tried to change the network type to something else but couldn't change it. (I presume the network type is for data, but I was trying to see if changing it would affect the service). The other options were there, but I couldn't select anything other than the CDMA auto. A battery pull fixed my problem both times.
Now I'm running BAMF Remix 1.6.3 with the new radio and everything is fine. I don't change the voltages or overclock. Yesterday as I was driving around town the phone rang, but I didn't answer it. When I got home, the phone had powered down and did a reboot.
Just an additional thought. You might try doing a data wipe/factory reset to see if that helps. Of course, you lose your settings that way, so back up first.
Ok it started with my first triumph. got it 2 weeks ago lasted all about 3 days and it went dead locked up wouldnt even come on. But whle it was working the stock rom wouldnt connect to wifi no matter what i tried, reset, battery removal, airplane toggle, cleared everything the whole shot. then i installed froycream sandwich and cm7 reloaded and they both worked great the wifi connected no problem. until the phone died.
Enter phone number 2. i had to track down because there werent any anywhere for 100 miles in any direction besides the one i found in a outta the way radio shack. got home the wifi connected right away no problems on stock i thought to myself hmm musta been something wrong woth the first phone from the word go, anyway installed cwm 5.0.2.6, then installed cm7, got all my stuff set up and wifi was working fine. went to bed woke up and went to connect to wifi and nuthing again when you turn wifi on it scanns says connecting and then says disconnected every few mins or so it will try and connect but it just continues to loop. i flashed back to a backup of stock and it connects again. tried froyocream sandwich v1.3 and cm7 reloaded by whysor 3 different builds.
ok so ive been flashing back and forth and and clearing this and that and trying different things , doing things in different order, installing different builds, trying to get it to work.
in between custom roms i decided to restore back to stock and see if it would connect stock again or not. at first it didnt, then i rebooted and tried again and it finally connected...woohoo. i was actually afraid that if i changed anything i would lose functionabilty again. but i flashed froyocream sandwich 1.3 again and cfrossed my fingers and sure enuf it connected when i got all setup. i have successfully used it on and off wifi for the last half hour anyway so ill keep posting my results ive seen a few people have kinda similar probs maybe we can figure it out , im looking through logcat files to see if i can see anything funny but................
I had this problem once before, I had to boot into clockwork go into advanced & wipe dalvik cache, then flash the OC kernel again & all was well. That's if your running CM7 reloaded.
I've run into this issue also