After upgrading my Tornado (O2 XDA Phone) to WM6 I have had problems with Radio. I use a analog Dual Sim, so I turn Flight Mode on and off to switch between the two Sim Cards. But after upgrading, when I switch to one certain of the two sims, it logs onto the GSM network but I'm unable to do phone calls, send sms etc. I have to reboot to get back GSM functionality. Further more, GPRS connection with this sim is impossible all the time, even after rebooting ("the remote party has ended this connection"). With the otcher sim, everything is allright and with another phone with WM5 everything works with both sim cards.
If searched and tried all combinations of different ROMs and Radio versions, but nothing helped, even downgrading to WM5 didn't (I think the original Radio wasn't included in the WM5 Rom).
Has anybody a clue, how to get it working?
u should be update gsm(radio version) to more lvl,i think.
i am is 4.1.13.28 now. have NOT any problem.
i have same problem("the remote party has ended this connection") too when use 4.0.13.20
check ur radio version.........
in setting/other/about...
Will this radio work with Qtek 8310? And where did you find it?
Lovetz said:
Will this radio work with Qtek 8310? And where did you find it?
Click to expand...
Click to collapse
i dont know that the radio can work or NOT on Qtek .
u can find it by:http://forum.xda-developers.com/showthread.php?t=324557
it in Step 10。
Thanks, I'm use the same version.
Thanks for your answer, but I'm allready using 4.1.13.28_02.61.01
Related
Anybody known the issue of GPRS disconnect by itself when the device (Dopod 818) is the standby mode for a long times? (if I need to turn-on GPRS, I must Reset device or off-on the radio again).
I face this boring problem when I used ROM WM6. Not occur on WM5 ROM. How I can fix this problem? Anybody can help?
Thanks a lot for every post and advise.
Check the newest Radio Rom
ํYes, current I using Radio 2.69.21 but the problem still remain....
cpc said:
ํYes, current I using Radio 2.69.21 but the problem still remain....
Click to expand...
Click to collapse
Which WM6 ROM did you installed?
Is that such a big problem to you? You may in line of more surprises from WM6. How about WiFi on/off not stable? How about missing calls? Check out BT with different head sets yet? How is the incoming sound volume adjustable?
You may want to stay on WM5 and read more on this forum and find out which WM6 ROM you want to install. They come with different favors!!!
I have recently upgraded my k-jam to custom WM6 and have tried 2.19.11, 2.25.11, 2.47.11, 2.61.11 and 2.69.11 radio roms and the data G or E icon keeps going away and instead i see an x sign
with WM5 even if i had an x sign and i wanted to connect to internet the application used to connect without any problem but with WM6 it does not connect when x is displayed saying that data services not available so i have to then turn the phone function off and on to get it working.
i heavily use data services so its very frustrating going through the process again and again.
is there a tweak/hack available? what could be causing the problem?
hi..did you try gprsworksround cab file?also club imate released new patch for gprs edge problem.check the club imate support web site.good luck
usb2007 said:
I have recently upgraded my k-jam to custom WM6 and have tried 2.19.11, 2.25.11, 2.47.11, 2.61.11 and 2.69.11 radio roms and the data G or E icon keeps going away and instead i see an x sign
with WM5 even if i had an x sign and i wanted to connect to internet the application used to connect without any problem but with WM6 it does not connect when x is displayed saying that data services not available so i have to then turn the phone function off and on to get it working.
i heavily use data services so its very frustrating going through the process again and again.
is there a tweak/hack available? what could be causing the problem?
Click to expand...
Click to collapse
When you were using wm5 was it stock or custom? If it was custom when you started having connectivity problem, try reflashing your official carrier rom andthe n reflash a cooked rom. You might just have had a bad flash.
What carrier are you with???? Have you loaded your settings correct ??? That are in "connections/connections" then in com manager , make sure your phone is "on" as when it is turned off, like in flight mode, you will get an "x" where it woud show "E" If all is well then I would return your phone in because you would have a hardware problem.
Hi,
I was faced with exactly the same weird gprs problem you described. That is, once booted, gprs works as expected. several hours later, G (or E) sign disappears and an x (no gprs service) appears at the top. After that, it is impossible to re-attach to the GPRS (the only way is to restart the radio or perform a soft-reset). I tried 3 different custom roms together with different radio roms. The tweaks didn't help me in any ways. I even tried 3.08 IPL/SPL without any success. Strangely, t-mobile wm5 rom and my original wm5 rom hadn't had any such problems.
Then I found NBD rom and it happily solved my problem (thanx zoki! for this great rom) I don't know what is wrong with other roms, but my problem simply went away!!
So, using NBD rom may solve your problem. It is great and the connection is successfully getting alive even x sign is displayed in my case (btw, same thing happened to one of my friends here and he then installed NBD, then gprs problem was solved successfully.)
Hope this helps.. All the best.
Orhan.
usb2007 said:
I have recently upgraded my k-jam to custom WM6 and have tried 2.19.11, 2.25.11, 2.47.11, 2.61.11 and 2.69.11 radio roms and the data G or E icon keeps going away and instead i see an x sign
with WM5 even if i had an x sign and i wanted to connect to internet the application used to connect without any problem but with WM6 it does not connect when x is displayed saying that data services not available so i have to then turn the phone function off and on to get it working.
i heavily use data services so its very frustrating going through the process again and again.
is there a tweak/hack available? what could be causing the problem?
Click to expand...
Click to collapse
hey, thanks a lot Orhan for the information..it really helped.
i was stuck and was planning to return back to WM5 but now with NBD 8.1 im good to go.
problem solved!!
I have the same problem with the new Kaiser - but what ist NBD 8.1 ? Is it a new rom or just a file ?
Thanks very much
NBD is a WM6 ROM for wizard
NBD 8.2
http://forum.xda-developers.com/showthread.php?t=319751
your running the default rom for Kaiser? whats your ips/spl/radio and os versions?
Hi guys,
I've got an AT&T branded HTC 8900 (tytn II, kaiser, what else).
Using it in Italy, with 3G provider (Wind).
I've updated it with Dutty V3. and radio i tried 1.27.12.11, -.17, -11.31... and my 3G (neither GPRS) connection doesn't work. When i try to connect the modem suddenly i get the “The answering modem has disconnected” than the “There is a problem connecting to the GPRS service in to your registered home network” messages.
Before the update, the modem had worked fine with 3G connection, with original AT&T ROM.
Any suggestion?
TNX
ALEX
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Brevi said:
I also have a problem with duttys v3 and 3g. I wrote about it in a diffrent thread already. i can make a connection but there is a certain "lag" when i try to request data from the internet. No Problems on GPRS though. Tried all the diffrent radio roms. no change. Operator is O2 Germany device is a HTC Tytn II. I got a new Sim card today, maybe this will improve the situation. The Sim has a diffrent contact-layout. Will try tonight.
I have the suspicion that S2U2 might cause the problem, but I am not sure. Do you use S2U2? If yes, what version?
Click to expand...
Click to collapse
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Did you try disabling HSDPA?
Fixed!
duttythroy said:
No problems here, try delete all settings which auto connections done, delete all proxys reset and enter manual settings to see if it works then
Click to expand...
Click to collapse
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Thanks Dutty! I tried your suggestion. I think it's a little better now but I still think the connection was more responsive in No.7 Rom. For example, when I log on to ICQ with IM+ it used to go straigt to a green "connected" icon. With v3 i get a yellow "connecting" icon for about 15 seconds and then the green one.
My new Sim card just got activated, but made no difference.
It's not that big of a deal for me, as my connection basicaly works.
I will test connection stabilty in he next couple of days.
Other than that v3 is great!! Thank you Dutty!
Are you planning on releasing a new Rom anytime soon?
Have a nice relaxing weekend Dutty!
eiem said:
Fixed fixed fixed fixed!!!!!!!!
I guess it was just a f#cking hidden setting!
Even if I removed all connection setting, it kept not working...
I've installed the removeHiddenProxy4CWS_0522 cab, ( http://www.cinetsystems.com/xda/ -> Kaiser Cab Collections )run, and after that it works fine!!
TNX!!
PS. HSPDA still enabled.
PPS. RADIO is again 1.27.11.31
Click to expand...
Click to collapse
Sweet!!!, I was having problems not being able to access the internet via PIE, but could using Opera...it was driving me Bonkers!!. This worked..
However, i'm still not able to access tom tom plus server!!, any ideas?
Hi! I reflashed v3 and everything seemed fine again. However I now have a problem where I can't call or receive calls when on UMTS. All is fine when I am on GSM.
I tried Alex's Multimedia Rom (1.56)...same story there.
I now flashed the HTC Rom that came with my Tytn II and so far (2 hours including several test calls) everything seems normal again. Will try to flash v3 again maybe tonight.
Starting to see everything in tricolor ;-)
Greetings from Aachen, Germany
Brevi
Nope problems catched up again...does anybody know, if it is better to remove the sim and/or turn off the phone radio before flashing radio roms?
Thanks! Brevi
Dear all,
maybe this is the same problem?
http://forum.xda-developers.com/showthread.php?t=335074
Is the hidden proxy also installed in a vodafone Rom?
Thnx Max
sounds familar
hi,
please see other posts by me(any way to link these threads moderators?) for other threads with similar issues. To clarify, if you revert back to your original rom, your 3G and phone calls work again? I started having problems with my 3G and phone functions about a week after I got my AT&T tilt..but after I changed to one of dutty's roms.
If I disable 3G via the comm manager, all works well, voice and data etc, but I can only do edge speeds. Unfortunately, I live 15 miles from the nearest 3G area so its hard fo me to experiment with roms and settings.
Also, to confuse things even more, one 3G area will still work for me while the network closer into to the Boston metro area won't, leading me to think that a network provisioning upgrade in the Boston area may be looking for something in the original AT&T rom that is now gone. I'm hoping not and that a phone upgrade or mother board swap will fix it(as others are reporting). I should do a revert back to the original rom and drive to my "test" area and see if 3G comes back...that would suck if it does...the stock roms are awful and about 5 years behind the time as far as user interface...like my old Ipaq.
I really like the dutty roms and may just live with edge speeds(dutty a donation will be forth coming once I settle in on a solution dude ).
rich
I guess I tried everything by now...diffrent roms including HTC stock rom, radios, flashing radio with sim in/out.
But the problem always comes back.
About to call HTC support and send my Kaiser in for repair.
Hope it won't take too long, I am addicted to this fine device.
Already charged my old Hermes today. Oh my god the Kaiser is sooo much better compared to the Hermes it almost made me laugh ;-)
hi,
i've a big big problem. i made the official upgrade to WM6.1 for my tytn II (italian) but once finished it was set under HSDPA. I disabled HSDPA and i turned to 3G.
with the old rom (official wm6) i disabled 3G by setting GSM following this path:
Comm manager -> options -> phone -> banda (i don't know the english translation, i think is band). under that panel i selected GSM and the phone turned to GSM, with G icon in the home screen
if i do the same thing with the new rom the phone freeze, and 10-15 seconds after a message says: cant switch band, try later.
i tried many times but the problem remains, i also tried to install the rom update again and again.
can you help me? 3G doesn't work fine where i live, so it's important to set GSM
someone told me that changing the radio rom (it has the original one) can solve the problem, can you give me some advice?
thanks
Same thing happened to me, restarted and tried again and it worked.
kobjing said:
someone told me that changing the radio rom (it has the original one) can solve the problem, can you give me some advice?
thanks
Click to expand...
Click to collapse
different radios yeild different signal strengths depending on location. try different wm6.1 radios and see if there is one that gives you better connection strength. go here for a list of radios:
http://forum.xda-developers.com/showthread.php?t=393182
Hi there,
I have a Qtek S200 WM5 mobile phone. Working good with all options, except for the WPA2 support. I've tried to connect to the Wireless Network at my work, but I could not (needed to install a certificate; but this did not help).
I though: an upgrade to WM6 or 6.1 will work, so I decided to upgrade to WM6.1 (one of the Roms of varanusvincent; which by the way works pretty nice!!!).
Now with WM6.1 I can connect to the wireless network of my work, but as soon as I get a good connection, my screen turns black. The LED lights on top of the phone still show me that the Wireless connection and the Telephone connection are still working.
Does anyone have an idea what's going on?
Thanks in advance for your help!
Check the new Rom from Varanus i solve that problem allready also the recent pdaviet roms have the wpa problem fixed.
Well, I've tried to use one of the latest ROMS of varanusvincent, which should be supporting WPA2...
I guess I'll buy another telephone after all I don't want to change the ROM again now... just finished making all new settings...
Thanks for the reply!
did you change the radio rom.
What do you mean by change the Radio ROM?