I have recently upgraded my k-jam to custom WM6 and have tried 2.19.11, 2.25.11, 2.47.11, 2.61.11 and 2.69.11 radio roms and the data G or E icon keeps going away and instead i see an x sign
with WM5 even if i had an x sign and i wanted to connect to internet the application used to connect without any problem but with WM6 it does not connect when x is displayed saying that data services not available so i have to then turn the phone function off and on to get it working.
i heavily use data services so its very frustrating going through the process again and again.
is there a tweak/hack available? what could be causing the problem?
hi..did you try gprsworksround cab file?also club imate released new patch for gprs edge problem.check the club imate support web site.good luck
usb2007 said:
I have recently upgraded my k-jam to custom WM6 and have tried 2.19.11, 2.25.11, 2.47.11, 2.61.11 and 2.69.11 radio roms and the data G or E icon keeps going away and instead i see an x sign
with WM5 even if i had an x sign and i wanted to connect to internet the application used to connect without any problem but with WM6 it does not connect when x is displayed saying that data services not available so i have to then turn the phone function off and on to get it working.
i heavily use data services so its very frustrating going through the process again and again.
is there a tweak/hack available? what could be causing the problem?
Click to expand...
Click to collapse
When you were using wm5 was it stock or custom? If it was custom when you started having connectivity problem, try reflashing your official carrier rom andthe n reflash a cooked rom. You might just have had a bad flash.
What carrier are you with???? Have you loaded your settings correct ??? That are in "connections/connections" then in com manager , make sure your phone is "on" as when it is turned off, like in flight mode, you will get an "x" where it woud show "E" If all is well then I would return your phone in because you would have a hardware problem.
Hi,
I was faced with exactly the same weird gprs problem you described. That is, once booted, gprs works as expected. several hours later, G (or E) sign disappears and an x (no gprs service) appears at the top. After that, it is impossible to re-attach to the GPRS (the only way is to restart the radio or perform a soft-reset). I tried 3 different custom roms together with different radio roms. The tweaks didn't help me in any ways. I even tried 3.08 IPL/SPL without any success. Strangely, t-mobile wm5 rom and my original wm5 rom hadn't had any such problems.
Then I found NBD rom and it happily solved my problem (thanx zoki! for this great rom) I don't know what is wrong with other roms, but my problem simply went away!!
So, using NBD rom may solve your problem. It is great and the connection is successfully getting alive even x sign is displayed in my case (btw, same thing happened to one of my friends here and he then installed NBD, then gprs problem was solved successfully.)
Hope this helps.. All the best.
Orhan.
usb2007 said:
I have recently upgraded my k-jam to custom WM6 and have tried 2.19.11, 2.25.11, 2.47.11, 2.61.11 and 2.69.11 radio roms and the data G or E icon keeps going away and instead i see an x sign
with WM5 even if i had an x sign and i wanted to connect to internet the application used to connect without any problem but with WM6 it does not connect when x is displayed saying that data services not available so i have to then turn the phone function off and on to get it working.
i heavily use data services so its very frustrating going through the process again and again.
is there a tweak/hack available? what could be causing the problem?
Click to expand...
Click to collapse
hey, thanks a lot Orhan for the information..it really helped.
i was stuck and was planning to return back to WM5 but now with NBD 8.1 im good to go.
problem solved!!
I have the same problem with the new Kaiser - but what ist NBD 8.1 ? Is it a new rom or just a file ?
Thanks very much
NBD is a WM6 ROM for wizard
NBD 8.2
http://forum.xda-developers.com/showthread.php?t=319751
your running the default rom for Kaiser? whats your ips/spl/radio and os versions?
Related
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Hi
I have the same Rom and the same Problem, no Wifi reconnect.
It has been stated by the cook 'its Right' at the first page of TNT.1933 that "
- Some of roms have the issue with cannot open the wifi from the first time"
maybe by reflashing or flashing the other versions of TNT .1933 solve this problem,no harm in trying.
it seems to be a problem with every wm6 rom i have used. I can connect fine to my apartments router but other places i could normally connect to very easily with wm5, i now cannot with wm6. Anyone else have this problem?
edit: this is not a problem with it connecting directly, it will not even connect manually or even show that a certain wireless network is in range even though i know that it is. I have reflashed to the same result
spencepu3 said:
Right now i am running the .1933 tnt build by it's right. When I was using wm5 I could always easily connect to my college's wifi service and it did so automatically. Now with wm6 the wifi network does not even show up as available and does not connect even when i try to force it to. Everything else works great but this minor problem is making me want to switch back to wm5, any idea whats wrong?
Click to expand...
Click to collapse
Use the .318 build (Jaguar, XM6, Loon kitchen). Thats the only build that does not have this problem in WM6, all the other builds have the problem.
WiFi problems w/1933
I think I've had exactly the same problems w/several TNT versions after TNT4 which worked OK. Also similar problems with
I have NOT had a problem w/WiFi using NBD 9.2 which has worked for several weeks now w/o hitch! NBD 9.2 is (relative to 1933) thin on applications so U have to track down the cabs and load. That is why I tried 1933 recently. No wifi so I went back to 9.2.
Good luck,
Jim
Cingular 8125 G3
NBD 9.2
SIM and CID unlocked
Radio 2.69.11 w/fix
I just met this for the very first time. Then it worked normaly. TNT5.0
Hi all,
I've got a Vodafone (UK) v1240 (HTC Tornado Noble variant) running ericjm WM6 For Tornado - HTC Edition ROM and GSM.02.61.01 / SPL.2.00.0014.
Every day or two, the 'G' symbol disappears from the bar at the top of the Home screen and doesn't return. GPRS is unavailable until I use the connection manager to turn the radio off and back on again.
This is *really* annoying as I use push email on a daily basis and often find ActiveSync in 'waiting for network' mode, even though I'm in an area with a good signal.
I've tried the registry hack of setting GRPS to 'Always on' and renaming the 'SuspendResume' registry value - but that doesn't seem to help this issue.
I've seen a few other grumbles on this forum and around the www about this issue - but no firm solutions. Can anyone shed any light on this - or suggest a fix?
the GPRS issue is fixed with the latest radio ROM update, did you run phil's WM6GSMUpdate? If not, get it from my tutorial in my signature
Thanks for the response karhoe.
I did apply WM6GSMUpdate while following an install guide similar to yours for ericjm's WM6 For Tornado - HTC Edition ROM.
I'll try re-applying it, but I believe it is already in effect as my radio version states: 4.1.13.28_02.61.01
Any other ideas?
Try this
I have the same problem when i use andot's ROM. I have also upgraded the radio to 4.1.13.28_02.61.01, but still not solved.
Finally, after i change my ROM to NiTroGenious' WM6 English 5.2.1616.18120 ROM, and upgraded my SPL to 2.00.0014, the problem has been solved. I am not sure whether is the ROM or SPL solve the problem.
If you want to upgrade your SPL, please find the link under NiTroGenious's signatures.
One thing I have seen even in my own phone (running VJs ROM v3.2) that depending on what's being refreshed on my home screen, the "E" symbol will disappear. In that case, it's not that my GPRS connection has dropped, it's just that the top bar isn't refreshing to display the symbol. If I force a home screen refresh, lo and behold it's back again. Could that be what's happening with you?
Hi
I have a S710 Vox (Original HTC, not Orange or something)
Since the firmwareupdate, i have troubles with wifi.
Before, i could access it at my hole appartment with "auto" power.
Now, I have to change the WiFi settings to "fullpower" to get a connection to internet.
It doesnt depend how far I am away from my AP. (testet with 1m distance on FritzBoxFonWlan, LaFonera and Zyxel 660Series)
When i am close to the APs, i have full signal strengh...
When i change the wifisettings to fullpower, it emties my battery within 2 hours....
What could be the reason that i can't connect with the "Auto"-Powersettings?
Bringing up...
I've reflashed with the original ROM. First thing I tried is WLAN. Still same issues.
Is there anyone having any Idea why my WLAN is just running with "MAx-Power"-Setting`?
Tried serveral AccessPoints
solved
Installed WM6.1
Now it works
sirride said:
Installed WM6.1
Now it works
Click to expand...
Click to collapse
WM 6.1 from Dr. Gonzo ? the one available here ?
Jep.
Did u also have that issue?
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
afeudale said:
Hi,
I'm pretty familiar with smartphones/pocket pc/windows mobile, but I can't figure this one out...
I picked up a Treo 750 this week and it has the latest WM6.1 ROM and Latest Radio firmware.
For some reason, it will not connect to GPRS/EDGE/3G data on its own. It gives an error about not being able to connect, to which you can then click "dismiss". If I then go to data connections and edit the connection and just click next, next, finish - data will work fine - until the phone is reset and you start over again...
I've tried WM5, 6 and 6.1 ROMS and 5 different radios and they all do the same thing...
Anyone?
Click to expand...
Click to collapse
I have a bit different problem, but seems like yours.. sometimes, it doesnt try to connect, no failure message, but no try, my resolution is having spb gprs monitor, which i ever used, even i had this problem... in this case, only click connect and everything is ok... sometimes it doesnt connect or says message like yours on my other HTC XDAs (9000,9100....) but spb solved it everytime...
aaischa, I tried SPB but no luck...
Interestingly, I tried downgrading to WM5 and it works fine with that...
Anyone else having this problem?
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
afeudale said:
Ok, so I ended up making a Mortscript to automatically connect. I attached it to this message in case anyone else needs it...
Click to expand...
Click to collapse
thanks, I had e the same problem
if only connect.mscr could run by itself
It would be great if connect.mscr could run when ever our treo's with hermes radios lost service. Mine with 154.07.00 once it looses service completely will not reconnect. If this script could run when the unit is not connected say every 10 minutes or so life would be good.
I have the same problem. Running 6.1 on the Telecom XT network in New Zealand...simply going into connections (as it says in the first post) and not doing anything solves it, but it is annoying. Any better solutions?
Radio: 1.56.70.11
ROM: WM6.1 (Treo750_OS5_2_19199WWE_STD)
Hi there,
I have a Qtek S200 WM5 mobile phone. Working good with all options, except for the WPA2 support. I've tried to connect to the Wireless Network at my work, but I could not (needed to install a certificate; but this did not help).
I though: an upgrade to WM6 or 6.1 will work, so I decided to upgrade to WM6.1 (one of the Roms of varanusvincent; which by the way works pretty nice!!!).
Now with WM6.1 I can connect to the wireless network of my work, but as soon as I get a good connection, my screen turns black. The LED lights on top of the phone still show me that the Wireless connection and the Telephone connection are still working.
Does anyone have an idea what's going on?
Thanks in advance for your help!
Check the new Rom from Varanus i solve that problem allready also the recent pdaviet roms have the wpa problem fixed.
Well, I've tried to use one of the latest ROMS of varanusvincent, which should be supporting WPA2...
I guess I'll buy another telephone after all I don't want to change the ROM again now... just finished making all new settings...
Thanks for the reply!
did you change the radio rom.
What do you mean by change the Radio ROM?