I think I messed up my sd card for my G1.
I have a 8gb memcard and it was with 2 partitions ext2 and fat32. I just wanted to enlarge the fat32 side because the ext2 was 4gb big. Useless I thought So i deceided to make it only 500mb as ext2 and 7gb as fat32.
Now the computer can't access the card, it says that the cardslot is empty.
I use Paragon Partition Manager and there I can't modifie my sdcard. Nothing helps. I can see my sdcard in Paragon, but can access it and modify it!
Is my card messed up and do I have to buy a new one? Anybody knows how to restore it as it was when I bought it (only fat32 8gb)
Try this: http://www.sdcard.org/consumers/formatter/
mikedmeyer said:
Try this: http://www.sdcard.org/consumers/formatter/
Click to expand...
Click to collapse
YES you are so great!
It works now! Just like new. 8gb no partitions.
Thx!
No problem.
Now I have an another problem!
It always says write delay failed constantly!
Cannot access it, cannot format it, even not with sd formatter.
Is it now realy broken?
nobody :'(
Otherwise I have to order a new 8gb memory card which costs me a lot
use partition magic, create 2 partitions, make the primary partition your biggest and format it fat32, the second partition format in ext2. Then you will be okay
atlmatt said:
use partition magic, create 2 partitions, make the primary partition your biggest and format it fat32, the second partition format in ext2. Then you will be okay
Click to expand...
Click to collapse
The problem is that I cant access my mem.card.
Always a fault: write delay failed. It makes even my computer freeze.
well if you have to get a new one get one of these:
http://www.androidaccess.com/sdcard/store.html
read about it here:
http://androidcommunity.com/forums/...allow-you-to-run-apps-from-the-sd-card-15502/
M3 SMGII said:
I think I messed up my sd card for my G1.
I have a 8gb memcard and it was with 2 partitions ext2 and fat32. I just wanted to enlarge the fat32 side because the ext2 was 4gb big. Useless I thought So i deceided to make it only 500mb as ext2 and 7gb as fat32.
Now the computer can't access the card, it says that the cardslot is empty.
I use Paragon Partition Manager and there I can't modifie my sdcard. Nothing helps. I can see my sdcard in Paragon, but can access it and modify it!
Is my card messed up and do I have to buy a new one? Anybody knows how to restore it as it was when I bought it (only fat32 8gb)
Click to expand...
Click to collapse
Had the same problem after i used Paragon, would not read micro sd anymore. I did a system restore to before i installed Paragon. Problem solved. I am able to read my cards again. I noticed that in that "finish formatting after reboot" Paragon had an error. Figured thats what caused the problem.
antempire4 said:
well if you have to get a new one get one of these:
http://www.androidaccess.com/sdcard/store.html
read about it here:
http://androidcommunity.com/forums/...allow-you-to-run-apps-from-the-sd-card-15502/
Click to expand...
Click to collapse
hmm that's nice!
I will buy a new one then.
Did You try sdsplit ??
It worked good for me, when there was no PC / laptop available.
(ps. Happy with the white version?? )
karloe said:
Did You try sdsplit ??
It worked good for me, when there was no PC / laptop available.
(ps. Happy with the white version?? )
Click to expand...
Click to collapse
Hi Karloe
Yes very happy with my white G1.
How is it with the black one running ADP 1.5?
I will try SDSPLIT, but i think it will not help
If it doesn't work, try a linux live CD (Ubuntu, OpenSuse, Knoppix (I like Knoppix because of the extensive toolset for testing))
[offtopic]
The black one is doing fine, engineering bootloader, ADP1.5 with appstosd
[/offtopic]
wow thanks!!!! i tried and it worked awesome!!!
pr0cl1v1ty said:
wow thanks!!!! i tried and it worked awesome!!!
Click to expand...
Click to collapse
It would be nice to tell us what You tried, so other users can learn from your reply
Related
For the last 5 hours I have had hell with my sd card I redid my phone with JF new build and wiped out my 8gb class 6 a-data sd card but all of a sudeen it been acting weird
one thing is in paragon it shows the partitions still there (ext2) which takes up the whole card and should not, while windows shows its fat32, and i can access it in windows but it wont show up in in partition program nor delete
while when i mount it into the g1 (where it ask to mount or dont mount when plug it into pc) it instantly unmounts and i click mount again but just makes a noise and unmounts also saying its blank
now my 2gb chip seems to work fine (sometimes well if i unstall the drivers and let them re install then it works for a great amount of time), but this 8 gb,...well
what do you guys think? is it fixable? I can record video of it all (errors and stuff included) if u want
idk if its my chip, my phone or my pc can anyone help?
i think this has something to do with the way windows handles sd cards with no partition table. i assume you formatted the whole card to fat32 using a third party utility? that will totally confuse the system, because it cached a version of the partition table and now there's nowhere to find the new one. a quick solution is to use the build-in format tool to format your sdcard (right click on sdcard's icon and select format...). this should force the system to recalculate the size of the partition. then you have to unplug the card reader and plug it back in. now paragon should work.
billc.cn said:
i think this has something to do with the way windows handles sd cards with no partition table. i assume you formatted the whole card to fat32 using a third party utility? that will totally confuse the system, because it cached a version of the partition table and now there's nowhere to find the new one. a quick solution is to use the build-in format tool to format your sdcard (right click on sdcard's icon and select format...). this should force the system to recalculate the size of the partition. then you have to unplug the card reader and plug it back in. now paragon should work.
Click to expand...
Click to collapse
after a long while, finally got windows to format the whole thing to fat32, but yet still acting weird
what kind of card reader are you using? certain card readers has their own controller and do not allow you to partition properly.
but i am sure mountd in android will allow you full access to the sdcard when it's mounted.
also how much total space do you have in that fat partition after format? a full 8gb sd should have approx. 7.45GB actually space. if your partition table is correct, windows should only format the fat partition and give you a size smaller than 7.45G.
I strongly suggest you try again under Linux using the phone as reader. any livecd with a partition manager will perform much better than windows.
Well i try it both on my phone and a mem card reader, but once I put it on my phone it does not detect a sd card (my 8gb im trying to fix) while detects my fat32 2 gb chip
on my laptop and pc cant format nor delete that ext2 8gb sd card
BUT that 8gb ext2 card im trying to fix loads perfeclty and can access it on ubuntu so im guessing its not physically broken
tanner2007 said:
but once I put it on my phone it does not detect a sd card
Click to expand...
Click to collapse
What do you mean by "it", the GUI. How about doing an ls on /dev/block from the terminal on the phone to see what linux sees?
tanner2007 said:
on my laptop and pc cant format nor delete that ext2 8gb sd card
Click to expand...
Click to collapse
Hmm, what do you mean by delete the card? You can delete a partition, but not a card: I'm not sure makes sense.
tanner2007 said:
BUT that 8gb ext2 card im trying to fix loads perfeclty and can access it on ubuntu so im guessing its not physically broken
Click to expand...
Click to collapse
You say ext2, but yet above you claim to have reformatted as FAT. What does your ubuntu machine think it is? One way to tell is to mount it and try to set permissions on a file, if you can, it is not FAT.
What is your objective, do you want a FAT partition, an EXT2 partition, both?
Well I got it working guys, I dont know what was happening as I said before different programs where detecting different file systems, but soon as I found out how to do it ubuntu I saw it was working and erased the whole card (all partitions and everything)
and now it works again thanks guys ur tips helped
Hi,
I'm trying to root the wifes new G1.
Now I've done this before with my own and now my HTC Hero.
However when I hit power and camera I get a quick message saying 'no image file' before it goes to the rainbow screen??
I have the Dreamg.nbh on the SDcard.
I tried to root using the flashrec.apk but when I type 'SU' in terminal it says permission denied, so I'm thinking it hasn't worked, however it did install Cyanogens recovery.
Confused on how to flash the Dreamg.nbh as I can't get into bootloader.
Has the process changed for cupcake builds?
Make sure you format the SD card as FAT32
The cards normally come as FAT and when you format the default option is to format as FAT, you just need to tell what ever you use to format the card with to format as FAT32 or you will get the no image error.
I did, HOWEVER I have partitioned it in advance as EXT3 and Linux swap in preparation, could that be the issue?
Amdathlonuk said:
I did, HOWEVER I have partitioned it in advance as EXT3 and Linux swap in preparation, could that be the issue?
Click to expand...
Click to collapse
ya that's prob it !!!! let us know
Teh Dust said:
Make sure you format the SD card as FAT32
The cards normally come as FAT and when you format the default option is to format as FAT, you just need to tell what ever you use to format the card with to format as FAT32 or you will get the no image error.
Click to expand...
Click to collapse
Wow... happened to have the same issue being that I bought my wife a G1 today! Solved my problem... whew, this question was right on time!
That was it!!!
DON'T partition your card to save time, it costs you more...
Thanks guys.
Hi,
I Created Ext2 Partition for Galaxy3, I inserted the SD Card into Plone and Use Link2SD , Work Fine
Now When I Unmount the Sd Card from Phone and Run the Minitool but there is Only Fat32 Partition Shows?
Why?
How to Convert or Recover It from Ext2 to Fat32? The Ext2 Partition Shows in My Stock Rom via Link2SD.
Thanks,
julie_bholu said:
Hi,
I Created Ext2 Partition for Galaxy3, Now How to Convert or Recover It from Ext2 to Fat32?
I tried MiniTool as I created from It. but it didnot Shows Me My Ext2 Partition, Why?
Thanks,
Click to expand...
Click to collapse
Try putting the card in a cardreader if you have one and look if you can see the partition appear on Partition wizard. If you don't have a card reader you could also try to connect the card to your pc by using a digital camera or something like that, although thats a bit riskier for your card.
Wiggierip said:
Try putting the card in a cardreader if you have one and look if you can see the partition appear on Partition wizard. If you don't have a card reader you could also try to connect the card to your pc by using a digital camera or something like that, although thats a bit riskier for your card.
Click to expand...
Click to collapse
I try same as you suggest but in mini tool , the ext2 partition not there, only fat32 displays in wizard.
julie_bholu said:
I try same as you suggest but in mini tool , the ext2 partition not there, only fat32 displays in wizard.
Click to expand...
Click to collapse
Well, this may sound stupid, but did you actually make a partition on your card? I mean, did you ever see the partition or got it working after you made it with Partition Wizard? I know I've made a mistake once, were I THOUGHT I made a partition allready, but DIDN'T because I didn't click the 'Apply' button in Partition Wizard and thats the only way the software acctually changes something.
Wiggierip said:
Well, this may sound stupid, but did you actually make a partition on your card? I mean, did you ever see the partition or got it working after you made it with Partition Wizard? I know I've made a mistake once, were I THOUGHT I made a partition allready, but DIDN'T because I didn't click the 'Apply' button in Partition Wizard and thats the only way the software acctually changes something.
Click to expand...
Click to collapse
Yup, the ext 2 part shows in the phone and work nice.
I am confused why it not shows in partition wizard. I am also run mini tool as admin in windows 7
julie_bholu said:
Yup, the ext 2 part shows in the phone and work nice.
I am confused why it not shows in partition wizard. I am also run mini tool as admin in windows 7
Click to expand...
Click to collapse
GOT SOLUTION
Used Ubuntu , Get EXT2 Partition there and Recreate from Ubuntu and used again , Thanks all for Help....
julie_bholu said:
GOT SOLUTION
Used Ubuntu , Get EXT2 Partition there and Recreate from Ubuntu and used again , Thanks all for Help....
Click to expand...
Click to collapse
Glad you got it working
Thx for Help ,
julie_bholu said:
GOT SOLUTION
Used Ubuntu , Get EXT2 Partition there and Recreate from Ubuntu and used again , Thanks all for Help....
Click to expand...
Click to collapse
If you are using windows OS you can use Easus Partition magic for formatting to ext2
hi there
i have rooted my device and
after that I install the jaggy rom.
now I have the problem:
my explorer don't find my sd card
my pc don-t find the sd card over usb
but I can install zip from sdcard!
whats the problem?? please help me, I tried everything but nothing works.
PICO PVT SHIP S-ON RL
HBOOT-1.07.0000
RADIO-1.18.80.18
Jun 7 2012...
Pico CVW-Based Recovery v5.0.2.
sry for my english but I hope you understand me
try removing and reinserting card
Backup sd card then format it. Let me know then.
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Backup sd card then format it. Let me know then.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
okey remove and reinsert and format (fat32) don't work
suggestion
Try inserting it in a NON smartphone and see if it recognises....even a linux laptop is worth a try....ATB :good:
ramo1989 said:
Try inserting it in a NON smartphone and see if it recognises....even a linux laptop is worth a try....ATB :good:
Click to expand...
Click to collapse
okey the card is recognized without the smartphone...
now I removed the ext4 partition and format it again (fat32)
it works, my phone found the sd card
but now I don't have a ext4 partition... do i need one??
thanks at all!!!!
jenius85 said:
okey the card is recognized without the smartphone...
now I removed the ext4 partition and format it again (fat32)
it works, my phone found the sd card
but now I don't have a ext4 partition... do i need one??
thanks at all!!!!
Click to expand...
Click to collapse
Only if you want to remove problems like low internal memory and want to use A2SD
My phone doesn't detect it either.
at start it gives small card with ! mark.
I tried formatting the card wholly with fat32,
I even tried making different partitions fat32+ext4.
In both ways my phone doesn't detect the memory card.
But when I do the update in recovery mode it updates through sd card.
My memory card is perfectly working on PC and other devices.
Try using the partition sd card option in recovery if you want to use Link2SD, A2SD or S2E.
Guys, do the cards ext2 or 3 , not 4. Don't know why but...... It worked for me. And if you partition them, make both partitions primary.
shortyoko said:
Guys, do the cards ext2 or 3 , not 4. Don't know why but...... It worked for me. And if you partition them, make both partitions primary.
Click to expand...
Click to collapse
Thank you very much..I had the same problem, I formatted my SD card to ext3,fat32 and a swap partition and Wolla..its working fine:victory:.
There are some issues with ext4 partitions.
ext4 partition are said to be better but they might have some problems.
So if you encounter any, format it completely and delete all partitions. Using your phone recovery to make partition would be better.
Sometimes your second partition(i.e. sd-ext) is not detected by your recovery, and your main fat32 is works fine. Well that happened with me and i searched for solutions for long time. But did get any.
Later i fixed it by flashing the last cwm recovery with which the sd-ext partition was getting detected. Seems like the new version of recovery was the problem. Or something else, I don't know.
So i had this sd card ( micro ) and i tried formating it knowing everything that i once had on it was useless and might as well you know and at the time it was exFAT and formated it again then i put it into my lg g3 and sd sd card is blank or file system is corrupt format sd card so i was like lulz ok den. So i proceed to do so although the error would come back right once it formatted and it was a cycle. So i decided to plug it into my computer and see whats happening so i open the micro sd card in windows explorer and said i needed to format the drive for it to work so now when i try i get a msg saying windows was unable to complete the format . and in dis manager it shows as file system raw and partition healthy and basically i cant use it any more help ??
thelgog said:
So i had this sd card ( micro ) and i tried formating it knowing everything that i once had on it was useless and might as well you know and at the time it was exFAT and formated it again then i put it into my lg g3 and sd sd card is blank or file system is corrupt format sd card so i was like lulz ok den. So i proceed to do so although the error would come back right once it formatted and it was a cycle. So i decided to plug it into my computer and see whats happening so i open the micro sd card in windows explorer and said i needed to format the drive for it to work so now when i try i get a msg saying windows was unable to complete the format . and in dis manager it shows as file system raw and partition healthy and basically i cant use it any more help ??
Click to expand...
Click to collapse
Have you tried out another partition tool, e.g. Partition Wizard ?!
na lemme try fast reply and
LS.xD said:
Have you tried out another partition tool, e.g. Partition Wizard ?!
Click to expand...
Click to collapse
this would proabaly be a problem yes ? in disk manager it didnt say it was allocated thanks btw
it also shows up as a basic MBR what ever that means
thelgog said:
this would proabaly be a problem yes ? in disk manager it didnt say it was allocated thanks btw
it also shows up as a basic MBR what ever that means
Click to expand...
Click to collapse
MBR = Master Boot Record.
Can you create a new partition with partition wizard?
LS.xD said:
MBR = Master Boot Record.
Can you create a new partition with partition wizard?
Click to expand...
Click to collapse
Yes altought i dont know which format to do or what ever i know how to navigate to everything i learned that and you cant do exFAT as a format or partition option on ext2-4 ntfs and fat32 i also have a lg g3
In a summary yes i can
thelgog said:
Yes altought i dont know which format to do or what ever i know how to navigate to everything i learned that and you cant do exFAT as a format or partition option on ext2-4 ntfs and fat32 i also have a lg g3
In a summary yes i can
Click to expand...
Click to collapse
if you want to use the sd card in your phone choose "fat32".
LS.xD said:
if you want to use the sd card in your phone choose "fat32".
Click to expand...
Click to collapse
I have the lg g3 it says that exFAT is support out of thr box and others says it too and form what i know is that fat 32 doesnt support stuff over 4 gb correct me if im worng and or 32 gb is there a way after i make it fat. 32 and working to make it exFAT or is it unnecessary yoyr the boss here
thelgog said:
I have the lg g3 it says that exFAT is support out of thr box and others says it too and form what i know is that fat 32 doesnt support stuff over 4 gb correct me if im worng and or 32 gb is there a way after i make it fat. 32 and working to make it exFAT or is it unnecessary yoyr the boss here
Click to expand...
Click to collapse
Of course you're right with the 4GB file limit. But for testing if your sd card still works it should be totally fine. Once the card works, you can format it to exFat in windows.
LS.xD said:
Of course you're right with the 4GB file limit. But for testing if your sd card still works it should be totally fine. Once the card works, you can format it to exFat in windows.
Click to expand...
Click to collapse
ok thanks ill do that once its all done.. still bugs me how i didnt think to use a partition manager before been on this for a day and a half
LS.xD said:
Of course you're right with the 4GB file limit. But for testing if your sd card still works it should be totally fine. Once the card works, you can format it to exFat in windows.
Click to expand...
Click to collapse
more problems arouse its still on RAW file system after every thing and i dont think anything even changed even though it said it was converted to FAT32 in the wizard
thelgog said:
more problems arouse its still on RAW file system after every thing and i dont think anything even changed even though it said it was converted to FAT32 in the wizard
Click to expand...
Click to collapse
Try to use SDFormatter. Try different options. If it doesn't help, may be your beloved sd card is (physically) broken.
Fat32
I think you have to format your SD into fat32