hi there
i have rooted my device and
after that I install the jaggy rom.
now I have the problem:
my explorer don't find my sd card
my pc don-t find the sd card over usb
but I can install zip from sdcard!
whats the problem?? please help me, I tried everything but nothing works.
PICO PVT SHIP S-ON RL
HBOOT-1.07.0000
RADIO-1.18.80.18
Jun 7 2012...
Pico CVW-Based Recovery v5.0.2.
sry for my english but I hope you understand me
try removing and reinserting card
Backup sd card then format it. Let me know then.
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Backup sd card then format it. Let me know then.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
okey remove and reinsert and format (fat32) don't work
suggestion
Try inserting it in a NON smartphone and see if it recognises....even a linux laptop is worth a try....ATB :good:
ramo1989 said:
Try inserting it in a NON smartphone and see if it recognises....even a linux laptop is worth a try....ATB :good:
Click to expand...
Click to collapse
okey the card is recognized without the smartphone...
now I removed the ext4 partition and format it again (fat32)
it works, my phone found the sd card
but now I don't have a ext4 partition... do i need one??
thanks at all!!!!
jenius85 said:
okey the card is recognized without the smartphone...
now I removed the ext4 partition and format it again (fat32)
it works, my phone found the sd card
but now I don't have a ext4 partition... do i need one??
thanks at all!!!!
Click to expand...
Click to collapse
Only if you want to remove problems like low internal memory and want to use A2SD
My phone doesn't detect it either.
at start it gives small card with ! mark.
I tried formatting the card wholly with fat32,
I even tried making different partitions fat32+ext4.
In both ways my phone doesn't detect the memory card.
But when I do the update in recovery mode it updates through sd card.
My memory card is perfectly working on PC and other devices.
Try using the partition sd card option in recovery if you want to use Link2SD, A2SD or S2E.
Guys, do the cards ext2 or 3 , not 4. Don't know why but...... It worked for me. And if you partition them, make both partitions primary.
shortyoko said:
Guys, do the cards ext2 or 3 , not 4. Don't know why but...... It worked for me. And if you partition them, make both partitions primary.
Click to expand...
Click to collapse
Thank you very much..I had the same problem, I formatted my SD card to ext3,fat32 and a swap partition and Wolla..its working fine:victory:.
There are some issues with ext4 partitions.
ext4 partition are said to be better but they might have some problems.
So if you encounter any, format it completely and delete all partitions. Using your phone recovery to make partition would be better.
Sometimes your second partition(i.e. sd-ext) is not detected by your recovery, and your main fat32 is works fine. Well that happened with me and i searched for solutions for long time. But did get any.
Later i fixed it by flashing the last cwm recovery with which the sd-ext partition was getting detected. Seems like the new version of recovery was the problem. Or something else, I don't know.
Related
I think I messed up my sd card for my G1.
I have a 8gb memcard and it was with 2 partitions ext2 and fat32. I just wanted to enlarge the fat32 side because the ext2 was 4gb big. Useless I thought So i deceided to make it only 500mb as ext2 and 7gb as fat32.
Now the computer can't access the card, it says that the cardslot is empty.
I use Paragon Partition Manager and there I can't modifie my sdcard. Nothing helps. I can see my sdcard in Paragon, but can access it and modify it!
Is my card messed up and do I have to buy a new one? Anybody knows how to restore it as it was when I bought it (only fat32 8gb)
Try this: http://www.sdcard.org/consumers/formatter/
mikedmeyer said:
Try this: http://www.sdcard.org/consumers/formatter/
Click to expand...
Click to collapse
YES you are so great!
It works now! Just like new. 8gb no partitions.
Thx!
No problem.
Now I have an another problem!
It always says write delay failed constantly!
Cannot access it, cannot format it, even not with sd formatter.
Is it now realy broken?
nobody :'(
Otherwise I have to order a new 8gb memory card which costs me a lot
use partition magic, create 2 partitions, make the primary partition your biggest and format it fat32, the second partition format in ext2. Then you will be okay
atlmatt said:
use partition magic, create 2 partitions, make the primary partition your biggest and format it fat32, the second partition format in ext2. Then you will be okay
Click to expand...
Click to collapse
The problem is that I cant access my mem.card.
Always a fault: write delay failed. It makes even my computer freeze.
well if you have to get a new one get one of these:
http://www.androidaccess.com/sdcard/store.html
read about it here:
http://androidcommunity.com/forums/...allow-you-to-run-apps-from-the-sd-card-15502/
M3 SMGII said:
I think I messed up my sd card for my G1.
I have a 8gb memcard and it was with 2 partitions ext2 and fat32. I just wanted to enlarge the fat32 side because the ext2 was 4gb big. Useless I thought So i deceided to make it only 500mb as ext2 and 7gb as fat32.
Now the computer can't access the card, it says that the cardslot is empty.
I use Paragon Partition Manager and there I can't modifie my sdcard. Nothing helps. I can see my sdcard in Paragon, but can access it and modify it!
Is my card messed up and do I have to buy a new one? Anybody knows how to restore it as it was when I bought it (only fat32 8gb)
Click to expand...
Click to collapse
Had the same problem after i used Paragon, would not read micro sd anymore. I did a system restore to before i installed Paragon. Problem solved. I am able to read my cards again. I noticed that in that "finish formatting after reboot" Paragon had an error. Figured thats what caused the problem.
antempire4 said:
well if you have to get a new one get one of these:
http://www.androidaccess.com/sdcard/store.html
read about it here:
http://androidcommunity.com/forums/...allow-you-to-run-apps-from-the-sd-card-15502/
Click to expand...
Click to collapse
hmm that's nice!
I will buy a new one then.
Did You try sdsplit ??
It worked good for me, when there was no PC / laptop available.
(ps. Happy with the white version?? )
karloe said:
Did You try sdsplit ??
It worked good for me, when there was no PC / laptop available.
(ps. Happy with the white version?? )
Click to expand...
Click to collapse
Hi Karloe
Yes very happy with my white G1.
How is it with the black one running ADP 1.5?
I will try SDSPLIT, but i think it will not help
If it doesn't work, try a linux live CD (Ubuntu, OpenSuse, Knoppix (I like Knoppix because of the extensive toolset for testing))
[offtopic]
The black one is doing fine, engineering bootloader, ADP1.5 with appstosd
[/offtopic]
wow thanks!!!! i tried and it worked awesome!!!
pr0cl1v1ty said:
wow thanks!!!! i tried and it worked awesome!!!
Click to expand...
Click to collapse
It would be nice to tell us what You tried, so other users can learn from your reply
I have an EVO and can't get my SDCard to mount. I think it is a card format issue. I was getting a lot of SDCARD damaged messages. I could get by them by rebooting. I rebooted and copied everything to my mac. On the copy it said there was a problem with the "tmp" folder. I thought I was deleting the tmp folder from my backup, but actually was the SDCARD copy. I rebooted and then unmounted the SDCARD, and tried to reformat. It gives the Format SD card, then erase everything, and then back to SD & phone storage immediately. Mount SD card does nothing. When I reboot, I get SD card safe to remove. I am running amon_RA (RA-evo-v1.7.0.2) recovery, Burnt Droid 1.0. Nothing in recovery that accesses the SDcard works. I do not have a card reader. Cannot access the SDcard from anything. I am thinking about returning to stock and taking to Sprint for them to format card. Any ideas before I do this?
Help anyone?
Try using unix tools cfdisk or fdisk to make a new partition table of the sd card, then use mkfs.vfat on it (this will erase all data, so backup the things you find neccessary if possible)
J0nny123 said:
Try using unix tools cfdisk or fdisk to make a new partition table of the sd card, then use mkfs.vfat on it (this will erase all data, so backup the things you find neccessary if possible)
Click to expand...
Click to collapse
Thanks.
Is there only one partition on the sdcard?
todivefor said:
Thanks.
Is there only one partition on the sdcard?
Click to expand...
Click to collapse
Hi..i just want to help u thats y i am replying...why dont u try the Panasonic SD card formatter v 2.0..i had a similar isssue on Froyo...the card wouldn't be read but then i used this formatter and it worked!
Msg me if it does/doesen't work....
circleofomega said:
Hi..i just want to help u thats y i am replying...why dont u try the Panasonic SD card formatter v 2.0..i had a similar isssue on Froyo...the card wouldn't be read but then i used this formatter and it worked!
Msg me if it does/doesen't work....
Click to expand...
Click to collapse
I got this to work by going back to stock. I could then access sdcard, formatted, and then rooted again. Downloaded SD card formatter for future reference.
Thank you.
circleofomega said:
Hi..i just want to help u thats y i am replying...why dont u try the Panasonic SD card formatter v 2.0..i had a similar isssue on Froyo...the card wouldn't be read but then i used this formatter and it worked!
Msg me if it does/doesen't work....
Click to expand...
Click to collapse
It worked for me...thanks for the tip!
iv made this as the chinese made a2sd but without the root and the original boot screen
what is app2sd
Apps to SD card feature which means you can install apps to your SD
------------------------------------------------------------------------------------
partition your sd to fat32 and ex3
ok so download here
put your phone in to fastboot by turning off and the press the up button and the power button
extract it to C:\rickywyatt\
cd C:\rickywyatt\
C:\rickywyatt>fastboot flash boot boot.img
changes are
-----------------------------------
1 permanently rooted
2 apps2sd
3 original boot screen
Can't get into fast boot
Sent from my ZTE-RACER using Tapatalk
Hey got root but can't get app2sd please advise
Sent from my ZTE-RACER using Tapatalk
did you partition your sd
When I did came up sd card damaged
Sent from my ZTE-RACER using Tapatalk
i done the partition what program did you use to partition it btw and i assume u need apps2sd sorry i am new at this i got the root as i stated but the sd card it having issues once its back in the phone if you have suggestion i would love the help
Angel0912 said:
i done the partition what program did you use to partition it btw and i assume u need apps2sd sorry i am new at this i got the root as i stated but the sd card it having issues once its back in the phone if you have suggestion i would love the help
Click to expand...
Click to collapse
i used my pulse mini to partition my sd
Ok so your sure its a ex3 I need not ex2
Sent from my ZTE-RACER using Tapatalk
Works fine after use z4root and then apps2sd then full root granted
Sent from my ZTE-RACER using Tapatalk
hey rickwyatt,
Thanks for your work. I am have been able to flash the boot image using your steps. I partitioned my sd card using Miniool Partition Wizard and created one FAT and other Ex3 which also formated the card. When I now boot my racer having sd card inside it does not start. It stays on 2nd logo (Three) and keep coming back. It gets started if the sd card is not in the phone. Any idea what could be the cause of this issue?
Also your steps do not mention if the sd card (after partition) needs to be in the phone when applying above steps, so I did it with both ways but no success.
Your help will be really appreciated.
also, somehting to note that after having deleted the partitions and reverting it back to FAT, phone does get started even with the sd card inside.
Do you know if the above steps (flashboot) will write any data on sd card (either FAT or ex3 partition)? coz If not, then it means my phone is still rooted and I can look into some other tools to create the ex3 partition and see if it works.
-----
UPDATE:
After doing some investigation I found that the process required another partition of format "Linux Swap" (for more than 32 mb) along with FAT and Ex3. Doing this allowed the mobile to start with memory card inside and the phone was rooted. BUT I cannot see an aaps2sd application. Also there is no way in Managing Applications that I can move data. Going to try installing Apps2SD separatly now.
did u succeed?
Hi,
After searching a lot here and other place, I didn't find the solution of my problem.
I have 8gb card.
1st break up
6GB - FAT32 - Primary
rest - FAT32 - Primary.
Link2SD is not able to mount.
Displaying in storage info as - "SD Card 2nd Part." Not Mounted.
------------------------------------------
2nd try, with another breakup.
6GB - FAT32 - Primary
1.2GB - EXT2 - Primary
60MB - L.Swap - Primary
rest - Unallocated.
From Link2SD, I m able to see that sdext2 is mounted.
So for a demo purpose, I installed an application, The auto linking starts but get fails. Not able to create link /bla/bla/ - I/O error.
I did mount that location as RW with root explorer, no luck.
Please let me know what to do and how to resolve it.
Hi
What app did you use to format the sd card?
When i format my sd card using the cwm, i have to format the ext particion using easeus to ext2 particion, witch is the format that the stock rom suports, when i did that, i go to the app, select ext2 and reboot the device, that does the trick
Tell if it works for you
Sent from my HTC ChaCha A810e using xda premium
toniaati spread
psicop said:
Hi
What app did you use to format the sd card?
When i format my sd card using the cwm, i have to format the ext particion using easeus to ext2 particion, witch is the format that the stock rom suports, when i did that, i go to the app, select ext2 and reboot the device, that does the trick
Tell if it works for you
Sent from my HTC ChaCha A810e using xda premium
Click to expand...
Click to collapse
Hi psicop,
Thanks for your reply, I used MiniTool.
Please suggest how/what to do..
I partitioned my sd with CWM and used A2SD, and it works fine.
Maybe you could try to partition it with CWM?
Soeskip said:
I partitioned my sd with CWM and used A2SD, and it works fine.
Maybe you could try to partition it with CWM?
Click to expand...
Click to collapse
Link2SD automatically moves all files in SD. Its seems better that A2SD. Correct me if I m wrong.
Also, please tell how to flash recovery to CWM ? I downloaded 1 click recovery and installed the v5.0.2.8 , at the time of flashing, it display failed.
Please direct me from where you did that...
Please help someone, my phone memory is full now... i can also add person to my gtalk or y! messenger....
Do you have clockworkmod recovery installed?
If so, partition your SD from there, and if I'm correct, go to Link2sd, and choose ext4 as partition format... worked for me after numerous fails with other tools...
Edit: search for a tutorial to install CWM. That's how I installed it...
Sent from my HTC ChaCha with CM9 using XDA app.
This might help: http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/
Apps in SD not working
I dunno if its relevant in this thread, but i couldnt find the answer anywhere else.
I partitioned my 8gb class 10 sd card and installed link2sd and all was fine. I created links for most of my apps and everything was fine, until I had to remove my sd card for some data transfer. Now my apps that were shifted previously are not working. For your information I use CM11 in my Galaxy ace.
Ram Shankar said:
I dunno if its relevant in this thread, but i couldnt find the answer anywhere else.
I partitioned my 8gb class 10 sd card and installed link2sd and all was fine. I created links for most of my apps and everything was fine, until I had to remove my sd card for some data transfer. Now my apps that were shifted previously are not working. For your information I use CM11 in my Galaxy ace.
Click to expand...
Click to collapse
Seems like you have to reinstall them, dunno why but removing the card might have had created problems.
swashie said:
Seems like you have to reinstall them, dunno why but removing the card might have had created problems.
Click to expand...
Click to collapse
The problem got solved, when I mounted the script again and did a reboot. When the phone boots, link2sd has to update all the links. There is an option available for this in the settings. Anyways thanks :good:
Hi guys.
Almost total noob here - not quite, but still.
I have a Pico/Explorer.
I rooted, flashed CWM 5.05, then a MIUI ROM.. all worked well. Then I wanted to try the new Triumph HD ROM. Initiall install was succesful.
I partitioned my SD card with 1024 ext3 and a swap of 128Mb
Wiped, installed ROM, no problems.
I didn't see that int2ext was supported (by command line, apparently) so I tried installing mount2sd from the play store.
After enabling everything in that app, I rebooted.
Phone became stuck on lock screen.. would not respond to any touches or buttons. But the UI updated when the battery got low, made a noise on low battery etc, and the time was updated.
I booted into recovery to test the buttons, all work fine. I checked my partition log and it said various errors like could not find this or that mount point.
I partitioned again, this time is was extremely slow. I put the SD card into my mac to add the images, but it wasn't found.
Now when I partition it does it really quick - on inspecting the log, it says "err: /dev/block/mmcblk0 does not exist!"
I can't mount the /sdcard or the /sd-ext in recovery.
Have I f!cked my SD card or my device?
Thanks for any help.
Connect your sd-card to pc using card reader if it shows sd-card then ok
If it not show ur sd-card then run minitool partition wizard
And find the sd-card there and format it and delete the sd-ext partition and re-create it using recovery
And never use two memory script at one time
Before using the another memory script remove the previous one
sent from
little pico
Thanks dude.
When I plug it in with a USB card reader, the SD card doesn't show - in minitool or anywhere else at all.
I think it's dead. Will have to buy a new one.
I will be careful with overclocking in future
Thanks again.
Put your card in the phone and boot into recovery.. Then mounts/storage and try to mount usb storage when connected to pc.. If the mem card shows up in your pc then try putting the card in a non android phone and delete the partitions.. Even my sd card didn't show up in a card reader.. But it showed up when I used a non android phone..
Sent from my HTC Explorer A310e using xda premium
make sure your sd card is usable - connect it to PC and check if it is being read. If yes, then continue. If no, then replace it.
Backup your entire SD card.
Delete all partitions and make one single partition using the Minitool Partition Wizard. Once done, try partitioning with the Recovery. this way you can ensure max compatibility.
And btw, only use swap if you are using Swapper, and only if your ROM supports it. Not all ROM support swapping. I recommend you to set swap to 0, our Pico is capable enough to run flawlessly without swap.
Once done, Factory Reset, Wipe Cache, flash your rom again and after one reboot flash mounts2sd or int2ext. Never use two scripts at a time.
same problem
It happened only with Triumph ROM for me no matter what i do the doesn't mount when i connect via usb tethering to my pc..I had to reboot into recovery for the memory card to show up in the pc..Can any one help me on this?
I never installed any secondary memory script..Just flashed the latest Triumph version after a superwipe....
The memory card never shows up on the pc but only in recovery..
format using minitool partion
format using minitool partion it'll fix sd card errors