iv made this as the chinese made a2sd but without the root and the original boot screen
what is app2sd
Apps to SD card feature which means you can install apps to your SD
------------------------------------------------------------------------------------
partition your sd to fat32 and ex3
ok so download here
put your phone in to fastboot by turning off and the press the up button and the power button
extract it to C:\rickywyatt\
cd C:\rickywyatt\
C:\rickywyatt>fastboot flash boot boot.img
changes are
-----------------------------------
1 permanently rooted
2 apps2sd
3 original boot screen
Can't get into fast boot
Sent from my ZTE-RACER using Tapatalk
Hey got root but can't get app2sd please advise
Sent from my ZTE-RACER using Tapatalk
did you partition your sd
When I did came up sd card damaged
Sent from my ZTE-RACER using Tapatalk
i done the partition what program did you use to partition it btw and i assume u need apps2sd sorry i am new at this i got the root as i stated but the sd card it having issues once its back in the phone if you have suggestion i would love the help
Angel0912 said:
i done the partition what program did you use to partition it btw and i assume u need apps2sd sorry i am new at this i got the root as i stated but the sd card it having issues once its back in the phone if you have suggestion i would love the help
Click to expand...
Click to collapse
i used my pulse mini to partition my sd
Ok so your sure its a ex3 I need not ex2
Sent from my ZTE-RACER using Tapatalk
Works fine after use z4root and then apps2sd then full root granted
Sent from my ZTE-RACER using Tapatalk
hey rickwyatt,
Thanks for your work. I am have been able to flash the boot image using your steps. I partitioned my sd card using Miniool Partition Wizard and created one FAT and other Ex3 which also formated the card. When I now boot my racer having sd card inside it does not start. It stays on 2nd logo (Three) and keep coming back. It gets started if the sd card is not in the phone. Any idea what could be the cause of this issue?
Also your steps do not mention if the sd card (after partition) needs to be in the phone when applying above steps, so I did it with both ways but no success.
Your help will be really appreciated.
also, somehting to note that after having deleted the partitions and reverting it back to FAT, phone does get started even with the sd card inside.
Do you know if the above steps (flashboot) will write any data on sd card (either FAT or ex3 partition)? coz If not, then it means my phone is still rooted and I can look into some other tools to create the ex3 partition and see if it works.
-----
UPDATE:
After doing some investigation I found that the process required another partition of format "Linux Swap" (for more than 32 mb) along with FAT and Ex3. Doing this allowed the mobile to start with memory card inside and the phone was rooted. BUT I cannot see an aaps2sd application. Also there is no way in Managing Applications that I can move data. Going to try installing Apps2SD separatly now.
did u succeed?
Related
hi there
i have rooted my device and
after that I install the jaggy rom.
now I have the problem:
my explorer don't find my sd card
my pc don-t find the sd card over usb
but I can install zip from sdcard!
whats the problem?? please help me, I tried everything but nothing works.
PICO PVT SHIP S-ON RL
HBOOT-1.07.0000
RADIO-1.18.80.18
Jun 7 2012...
Pico CVW-Based Recovery v5.0.2.
sry for my english but I hope you understand me
try removing and reinserting card
Backup sd card then format it. Let me know then.
Sent from my WT19i using xda app-developers app
rachit.rc96 said:
Backup sd card then format it. Let me know then.
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
okey remove and reinsert and format (fat32) don't work
suggestion
Try inserting it in a NON smartphone and see if it recognises....even a linux laptop is worth a try....ATB :good:
ramo1989 said:
Try inserting it in a NON smartphone and see if it recognises....even a linux laptop is worth a try....ATB :good:
Click to expand...
Click to collapse
okey the card is recognized without the smartphone...
now I removed the ext4 partition and format it again (fat32)
it works, my phone found the sd card
but now I don't have a ext4 partition... do i need one??
thanks at all!!!!
jenius85 said:
okey the card is recognized without the smartphone...
now I removed the ext4 partition and format it again (fat32)
it works, my phone found the sd card
but now I don't have a ext4 partition... do i need one??
thanks at all!!!!
Click to expand...
Click to collapse
Only if you want to remove problems like low internal memory and want to use A2SD
My phone doesn't detect it either.
at start it gives small card with ! mark.
I tried formatting the card wholly with fat32,
I even tried making different partitions fat32+ext4.
In both ways my phone doesn't detect the memory card.
But when I do the update in recovery mode it updates through sd card.
My memory card is perfectly working on PC and other devices.
Try using the partition sd card option in recovery if you want to use Link2SD, A2SD or S2E.
Guys, do the cards ext2 or 3 , not 4. Don't know why but...... It worked for me. And if you partition them, make both partitions primary.
shortyoko said:
Guys, do the cards ext2 or 3 , not 4. Don't know why but...... It worked for me. And if you partition them, make both partitions primary.
Click to expand...
Click to collapse
Thank you very much..I had the same problem, I formatted my SD card to ext3,fat32 and a swap partition and Wolla..its working fine:victory:.
There are some issues with ext4 partitions.
ext4 partition are said to be better but they might have some problems.
So if you encounter any, format it completely and delete all partitions. Using your phone recovery to make partition would be better.
Sometimes your second partition(i.e. sd-ext) is not detected by your recovery, and your main fat32 is works fine. Well that happened with me and i searched for solutions for long time. But did get any.
Later i fixed it by flashing the last cwm recovery with which the sd-ext partition was getting detected. Seems like the new version of recovery was the problem. Or something else, I don't know.
Hi,
After searching a lot here and other place, I didn't find the solution of my problem.
I have 8gb card.
1st break up
6GB - FAT32 - Primary
rest - FAT32 - Primary.
Link2SD is not able to mount.
Displaying in storage info as - "SD Card 2nd Part." Not Mounted.
------------------------------------------
2nd try, with another breakup.
6GB - FAT32 - Primary
1.2GB - EXT2 - Primary
60MB - L.Swap - Primary
rest - Unallocated.
From Link2SD, I m able to see that sdext2 is mounted.
So for a demo purpose, I installed an application, The auto linking starts but get fails. Not able to create link /bla/bla/ - I/O error.
I did mount that location as RW with root explorer, no luck.
Please let me know what to do and how to resolve it.
Hi
What app did you use to format the sd card?
When i format my sd card using the cwm, i have to format the ext particion using easeus to ext2 particion, witch is the format that the stock rom suports, when i did that, i go to the app, select ext2 and reboot the device, that does the trick
Tell if it works for you
Sent from my HTC ChaCha A810e using xda premium
toniaati spread
psicop said:
Hi
What app did you use to format the sd card?
When i format my sd card using the cwm, i have to format the ext particion using easeus to ext2 particion, witch is the format that the stock rom suports, when i did that, i go to the app, select ext2 and reboot the device, that does the trick
Tell if it works for you
Sent from my HTC ChaCha A810e using xda premium
Click to expand...
Click to collapse
Hi psicop,
Thanks for your reply, I used MiniTool.
Please suggest how/what to do..
I partitioned my sd with CWM and used A2SD, and it works fine.
Maybe you could try to partition it with CWM?
Soeskip said:
I partitioned my sd with CWM and used A2SD, and it works fine.
Maybe you could try to partition it with CWM?
Click to expand...
Click to collapse
Link2SD automatically moves all files in SD. Its seems better that A2SD. Correct me if I m wrong.
Also, please tell how to flash recovery to CWM ? I downloaded 1 click recovery and installed the v5.0.2.8 , at the time of flashing, it display failed.
Please direct me from where you did that...
Please help someone, my phone memory is full now... i can also add person to my gtalk or y! messenger....
Do you have clockworkmod recovery installed?
If so, partition your SD from there, and if I'm correct, go to Link2sd, and choose ext4 as partition format... worked for me after numerous fails with other tools...
Edit: search for a tutorial to install CWM. That's how I installed it...
Sent from my HTC ChaCha with CM9 using XDA app.
This might help: http://www.xperiablog.net/2011/12/12/link2sd-guide-never-worry-about-internal-memory-limits-again/
Apps in SD not working
I dunno if its relevant in this thread, but i couldnt find the answer anywhere else.
I partitioned my 8gb class 10 sd card and installed link2sd and all was fine. I created links for most of my apps and everything was fine, until I had to remove my sd card for some data transfer. Now my apps that were shifted previously are not working. For your information I use CM11 in my Galaxy ace.
Ram Shankar said:
I dunno if its relevant in this thread, but i couldnt find the answer anywhere else.
I partitioned my 8gb class 10 sd card and installed link2sd and all was fine. I created links for most of my apps and everything was fine, until I had to remove my sd card for some data transfer. Now my apps that were shifted previously are not working. For your information I use CM11 in my Galaxy ace.
Click to expand...
Click to collapse
Seems like you have to reinstall them, dunno why but removing the card might have had created problems.
swashie said:
Seems like you have to reinstall them, dunno why but removing the card might have had created problems.
Click to expand...
Click to collapse
The problem got solved, when I mounted the script again and did a reboot. When the phone boots, link2sd has to update all the links. There is an option available for this in the settings. Anyways thanks :good:
Hi guys.
Almost total noob here - not quite, but still.
I have a Pico/Explorer.
I rooted, flashed CWM 5.05, then a MIUI ROM.. all worked well. Then I wanted to try the new Triumph HD ROM. Initiall install was succesful.
I partitioned my SD card with 1024 ext3 and a swap of 128Mb
Wiped, installed ROM, no problems.
I didn't see that int2ext was supported (by command line, apparently) so I tried installing mount2sd from the play store.
After enabling everything in that app, I rebooted.
Phone became stuck on lock screen.. would not respond to any touches or buttons. But the UI updated when the battery got low, made a noise on low battery etc, and the time was updated.
I booted into recovery to test the buttons, all work fine. I checked my partition log and it said various errors like could not find this or that mount point.
I partitioned again, this time is was extremely slow. I put the SD card into my mac to add the images, but it wasn't found.
Now when I partition it does it really quick - on inspecting the log, it says "err: /dev/block/mmcblk0 does not exist!"
I can't mount the /sdcard or the /sd-ext in recovery.
Have I f!cked my SD card or my device?
Thanks for any help.
Connect your sd-card to pc using card reader if it shows sd-card then ok
If it not show ur sd-card then run minitool partition wizard
And find the sd-card there and format it and delete the sd-ext partition and re-create it using recovery
And never use two memory script at one time
Before using the another memory script remove the previous one
sent from
little pico
Thanks dude.
When I plug it in with a USB card reader, the SD card doesn't show - in minitool or anywhere else at all.
I think it's dead. Will have to buy a new one.
I will be careful with overclocking in future
Thanks again.
Put your card in the phone and boot into recovery.. Then mounts/storage and try to mount usb storage when connected to pc.. If the mem card shows up in your pc then try putting the card in a non android phone and delete the partitions.. Even my sd card didn't show up in a card reader.. But it showed up when I used a non android phone..
Sent from my HTC Explorer A310e using xda premium
make sure your sd card is usable - connect it to PC and check if it is being read. If yes, then continue. If no, then replace it.
Backup your entire SD card.
Delete all partitions and make one single partition using the Minitool Partition Wizard. Once done, try partitioning with the Recovery. this way you can ensure max compatibility.
And btw, only use swap if you are using Swapper, and only if your ROM supports it. Not all ROM support swapping. I recommend you to set swap to 0, our Pico is capable enough to run flawlessly without swap.
Once done, Factory Reset, Wipe Cache, flash your rom again and after one reboot flash mounts2sd or int2ext. Never use two scripts at a time.
same problem
It happened only with Triumph ROM for me no matter what i do the doesn't mount when i connect via usb tethering to my pc..I had to reboot into recovery for the memory card to show up in the pc..Can any one help me on this?
I never installed any secondary memory script..Just flashed the latest Triumph version after a superwipe....
The memory card never shows up on the pc but only in recovery..
format using minitool partion
format using minitool partion it'll fix sd card errors
Hello, i have a problem with my Galaxy Tab 2.7.0 (GT-P3110) with omni-4.4.4-20140820-p3110-NIGHTLY rom installed.
I have bought a SAMSUNG ELECTRONICS IT - MB-MPCGC EU (Samsung microSDXC 64GB Class 10 ) micro sd card and I used it out of the box in my PAD without need to format it.
(in Storage i have found it under SD CARD tab (Total Space 58.45 GB not sure if this is ok) but i don't have the option for Formatting it (only Unmount and after it Erase or Mount)
I can see it with Windows 7 via USB MTP mode and copy files on it but not formatting it
I have tested this card with Sdtools and Sdcardtester on the tab without any problem
Now my problem is that i want to use Link2sd to move my apps on the Sd card but i have no way to make the 2 needed partitions on the it
I have tried to see if Mini Tool Partition would able to see the card from the tab's USB in MTP mode without success, i have tried to use a Sd card reader directly on my Pc with the same result (with another microd sd i was able to have it connected in Windows but this card is only 4 gb)
I have tried this also on a different PC without any luck
I tried to make partition on the card in recovery mode (tried with TWRP_2.7.1.2 and PhilZ-Touch-Recovery_6.57.5 and CWM_6.0.5.0) but in none of the 3 i have found the Partition SD card option inside the Advanced menu...
So after trying everything i'm lost
If anyone have any advice or can give me any help on this i will appreciate it
@lucas1965
See the before site for a tool for partitioning sdcards. Partitioning sdcards will erase all data on the card.
Sent from my SGH-T989
jrc2 said:
@lucas1965
See the before site for a tool for partitioning sdcards. Partitioning sdcards will erase all data on the card.
Sent from my SGH-T989
Click to expand...
Click to collapse
With Aparted (found in the Google Play store) i was able to check the card file system (the app told me that was FAT32 ) and to make 2 partitions
1 Fat32 and 1 ext4 but i still have all the same problems as before also with Link2sd not letting me move apps from the internal memory to the sd but only link them
lucas1965 said:
With Aparted (found in the Google Play store) i was able to check the card file system (the app told me that was FAT32 ) and to make 2 partitions
1 Fat32 and 1 ext4 but i still have all the same problems as before also with Link2sd not letting me move apps from the internal memory to the sd but only link them
Click to expand...
Click to collapse
Stupid tapatalk didn't invited my link like I told it to. Here it is. https://www.sdcard.org/downloads/formatter_4/
Sent from my SGH-T989
Sent from my SGH-T989[/QUOTE]
I was thinking that my english was so bad that i was misunderstanding your first post
I tried that program before but it is not working for me cause i can't get the sd card working in Windows so i can't format it there
Still i was able to solve the big part of my problem because with Aparted launched on the tablet i made the 2 partitions requested from Link2sd to use the function Create Link that will help me a lot
Now i just need to know the best size to have in the 2 partitions. I'm still unable to move all the app but maybe sooner or later someone will find a solution to this .
I was thinking that my english was so bad that i was misunderstanding your first post
I tried that program before but it is not working for me cause i can't get the sd card working in Windows so i can't format it there
Still i was able to solve the big part of my problem because with Aparted launched on the tablet i made the 2 partitions requested from Link2sd to use the function Create Link that will help me a lot
Now i just need to know the best size to have in the 2 partitions. I'm still unable to move all the app but maybe sooner or later someone will find a solution to this .
Click to expand...
Click to collapse
@lucas1965
Your English is just fine
The dying honestly depends on what files you need on your sdcard compared to the source the apps you plan to move to your sdcard will take up. I'd either make them both 32GB or one 16 gb and one 48 gb, the larger one obviously for whichever partition needs to be bigger.
Sent from my SGH-T989
Hi guys,
I recently got an old htc explorer and i am trying to make it possible to live with. I have a 64 GB sd card installed and i want to install Fly rom on it cause it has excellent reviews. When i try to partition my sd card using mini partition wizard the program wont allow me and when i try to do it using recovery image (A310, TWRP, CWM) it says complete but when i mount sd-ext it says error mounting. Anw i copied the files needed for this rom in my sd card (which is FAT32 formatted) and i install the rom. But the process gets stuck in boot screen and nothing happens .. What i' m i doing wrong?
Thanks
antros48 said:
Hi guys,
I recently got an old htc explorer and i am trying to make it possible to live with. I have a 64 GB sd card installed and i want to install Fly rom on it cause it has excellent reviews. When i try to partition my sd card using mini partition wizard the program wont allow me and when i try to do it using recovery image (A310, TWRP, CWM) it says complete but when i mount sd-ext it says error mounting. Anw i copied the files needed for this rom in my sd card (which is FAT32 formatted) and i install the rom. But the process gets stuck in boot screen and nothing happens .. What i' m i doing wrong?
Thanks
Click to expand...
Click to collapse
i think HTC explorer support upto 32gb sd card max. How are you using 64gb!!
ULTIMATESAM said:
i think HTC explorer support upto 32gb sd card max. How are you using 64gb!!
Click to expand...
Click to collapse
If you format it to FAT32 you can use it!