I have an i910, and we recently got a leaked rom. I cooked a wm6.1 rom, and went through the learning process of dumping the image and the cooking process. I decided I wanted to give wm6.5 a shot, so I ported the XIP (There are a few !!! regions, but it's the same as the original shipped rom), and found a 21501 XIP/SYS. I got the common stuff in the SYS folder, and all of the DPI/Res stuff from 21210 in the folder. I also have a 21210 build that boots.
My problem now, is that the 21501 will boot, but when ever I try to copy files from, I get a 'Disk full or write protect on' error. I've checked disk space, and there is plenty of program storage left. The 21210 boots, I get a few normal errors when the device boots, but it then freezes, but the power button still works.
Has anyone ever run in to either of these problems?
Related
Hello ppl
The other day i made my first bigstorage using rom 1.12.05PTB from i-mate, it run perfectly... no boot delays, random cold boots... nothing...
Yesterday i felt the need to test the new 1.13 rom and radio WWE, everything ok... no problem. but then i felt the need to go back to my language... and updated to 1.12.05PTB again but now without bigstorage...
Now the problem is that my storage simpy disapeard... how can i get it back?
Help please?
Goes back to BigStorage and fill up your /storage with 8-10MB (exceed 7MB) then put your wanted rom. New Rom will format your /storage and u it will come back without BigStorage.
Thanks. I will try it asap and post the result.
Thanks pmquan. it worked just fine
Mine is not formating.
I copied the same file more than once on the storage and had 9,7 MB usage.
Then i flashed with a official update and storage was back again.
But some of the files are also there, and i cant delete. i will try another time with one big file tommorow.
So, it seem that this solution not working.
After my last post i tried with one 12 mb file. Storage was missing.
Back to Big Storage and did it again with a 9 MB File. Storage was missing.
Last try was with 9 1MB files. Storage was missing.
Any suggestions?
Try to use 2 files 3MB don't fill over the 7MB... It worked for me hope it works for you to.
I fixed it!
Seems that the issue was that i did the bigstorage with an wwe rom upgrade, and than revert to tmde rom.
This morning i created a new bigstorage with a tmde rom, put all files from extrom in the storage ( i wanted to check if autorun would work if i put it in there - no success ). After that i flashed it again with the orig tmde rom, and during ce rom upgrade ther was a failure. Hard Reset, still in bootloader and started the upgrade again. After successfull upgrade i now have back my storage, with no files in it, and i can write and delete.
Now it could be that it was because of the:
- wwe<->tmde differences
- the failure during the upgrade ( whatever this could have done )
- just a little help from my guardian angel ( i only borrowed it from a colleague for a project where i needed this device, and i think he would bo not very happy without storage )
Maybe i will try it again if a can get my hands on an magician when one of my colleagues orders a new device... But for now i´m finished. Thanks.
Ok any hints or ansewers would be greatly appreciated! How do you guys get the newest versions of CE into your roms?
I am thinking you just get the official roms and use kaiser kitchen to extract them correct? Well so far ive tried the almost official winmo 6.1 rom for at&t, ive tried ddk.05, ive also tried laurentius v9. Everytime i extract these roms all the folders OEM, SYS, and ROM are pretty much empty?! I'm not look'in to rip people off i just want to get a base version of ce wich is compatible with radio 1.65.20.29. The roms in alex's kit 3.03 and 3.02 have alot of issues with the 1.65 radios.
Ive tried everything i can think of, am i acually maybe suppose to dump the rom off the device then rebuild it? Instead of trying to extract from the .nbh?
I mean im assuming all these 3.55 roms were mogul roms at one point right? and they just copied all tytan 2 drivers over?
I also really like ddk.05 i just don't think the page pool is big enough it seems to me whenever i run the page pool tool nothing happens. I select the rom then i click the size then change too and close. But the device always reports the same amount of free memory no matter what i set the page pool too. I like i a huge page pool because i play PocketQuake and it helps speed it up. Going from 18 to 32mb page pool sped quake up 2fps. I dont usually have alot off apps open either.
Problem is that you are trying to cook a ROM from a cooked ROM. Meaning you are taking ROMS like ddk.05 which is already cooked from the member.
Alot of members are using different tools then KaiserKitchen in order to cook their roms which in turn means there will not be any .rgu's or files in many folders.
Your best bet is trying to cook a rom based off of the ATT 19213 version...just type ATT 19213 in search and look for the rom. it should be around 118mb when downloaded and extracted.
Thank you! ill do a search around for that, but im still wondering where they get these new builds of ce, do they just dump them from devices?
Oh shoot i just realized http://forum.xda-developers.com/showthread.php?t=391708 is the build your talking about. I already downladed that and then tried to extract it with the kitchen and it was completely empty.
My XDA Live 3 Rom is based on the at&t 19213 Rom and it has the RGU files intact.
As for getting the updated OS, yes they are taking OEM Diamond Roms and extracting the files from there.
I am cooking a WM6.1 ROM for the LG KS20. Or at least I am trying to.
I am using spocky12's KisS ROM.
After extracting all the files, I use PkgToolsOSBuilder to split the contents of my rom dump into two folders, OEM and SYS.
Under SYS I can add/remove packages I want or don't want.
However, when I go back to PkgToolsOSBuilder, build rom tab and press Go, it complains about an Unhandled Exception in the application.
Another thing is that Spocky's ROM, fast and stable, is using an old build of Windows Mobile 6.1 - 5.2.20755. I understand that there is a WM 6.1.4 w/AKU 1.4.4 Build 20765.1.4.4. How do I upgrade the build from 20755 to 20765, although minor?
Thanks a lot!
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Boudin said:
Hi,
I've got a Touch Cruise that I've flashed several times three days ago.
First I've done the hardSPL flash, CID unlock and SIM unlock.
After this I've flashed with a 6.1 rom (M-Amine 2.0) but I was seaking for a more "finger-friendly" UI so I've tried Kostas's C2 rom.
It's after flashing with Kostas's C2 rom that the problem first appeared. After a hour I could'nt launch any software. As File Explorer was already executing, I tried to launch exe files directly, but there were no more files in phone storage memory.
I softreset the device and it failed to boot (everlasting windows starting logo).
I've hardreseted the device and it booted successfully.
So I flashed the device with pcarvalho eXtreme :
pcarvalho eXtreme (3.60.WM65X) ROM 3.19 R0 Release (101MB RAM) [23557] (non3D) [16-Apr] (fixed)
It flash well, run for two or three hours and I noticied that my ringtones mysteriously changed to the default one. Using the File Explorer I checked the content of storage memory and it was all corrupted. Missing folders, files with non-alphanumeric names in root folder...
After a hard-reset my phone works well.
Things I've done after each installation : Contact+sms restore using PPCPimBackup, TomTom installation (7.918.xxx)
My Rom :
OS Version : 5.2.23557
Radio Version : 1.59.46.12
Anybody knows where can it come from ?
Thanks
Click to expand...
Click to collapse
it can be a many number of things...but you can start by check the card first...every time you go from one rom to another check it and save things (important ones)
now you can only try to get things back with getdataback (always worked with me)...
cheers
Thanks for the answer. It's not my storage card that lose data but phones internal storage memory.
It happened again just now, while installing a cab file.
I've got the impression that it's linked to cab installer since the other times I have installed a CAB to (tomtom) but it could be the fact that cab installer is writing data on defective memory.
Is there a way to test the internal storage memory in order to check if the problem is hardware ?
Finally it happened again, without cab install, without any manipulation after the hard reset.
I switched back to M-Amine 2.0 (WM 6.1) and it seems to have resolved the problem.
It's like the file system driver used in windows mobile 6.5 don't works well with my phone, wich can explain the file renaming, file disappearance, directory loss etc...
I would like to have a solution to switch back to WM 6.5 and a more recent version of HTC applications, so if anybody have any idea where can it come from...
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
There seem to be HR and MC losing data issues with some roms, so i recommend flashing a htc original rom and only then this one, before proceeding as always make a backup of all data before attempting to use this rom...
Click to expand...
Click to collapse
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Boudin said:
Sorry to post three messages in a row, but there may be a thing I misunderstood.
In Pcarvalho rom thread I've seen this :
But I don't know what HR and MC stands for here.... Is this concerning only the Storage Card or phone's Internal memory can also be problematic ?
I may have to flash back to an official rom before try again a WM 6.5 rom.
The problem have disappeared since I'm back to a WM 6.1 rom
Click to expand...
Click to collapse
i've been trying with android while waiting for pcarvalho next release. i am using task29 and radio.nbh to clean up the rom. what i noticed is that ( and i believe) task29 does not really clean the ROM, because after flashing many times android ( and i always use Task29, then flash android rom) the problem that i have ( lock SD card and its r/o status) did not disappear. i've been switching from rom to rom to rom (different build) , trying to elimante the problem. at last i flash back pcarvalho's rom back, than task29, than back to android. the problem solve. i donno may be because task29 only perform quick format instead of full format. the problem stays. i think ( maybe i am wrong) the bigger the size of the rom file is better as it rewrite the whole rom instead of small section of rom.
i guess...
It's surely something like this, i've just flashed with an official rom and flashed with pcarvalho's one and this time it works like a charm. (by the way, thanks to all cookers for their works).
So the problem is resolved, I had misunderstood the problem of data loss as it does not affect only the storage card data but also phone's internal storage memory.
Thanks to all.
Hi everyone, i'm cooking my first ROM with Ervius Visual Kitchen. I used a stock ROM from HTC as a base and I have now since upgraded to build 21916, but after every hard reset I still get the HTC customization screen that gives you 3 seconds to cancel before it installs a whole bunch of useless junk. Is there a way to remove that and cook my cabs and EXTs directly? Thanks!
Additional reading?
Have you checked Chef Central yet? I would suspect that would be very valuable for chefs, new or seasoned.
Ok I figured it out. I had to delete "OperatorPKG" "ConfigAP" "ExtendedPKG" and "OperatorPKG_PT" folders from my OEM folder. But now I have a new problem.
Whenever try to cook Manila 2012 and all of its requirements into my rom, the settings icon disappears from my start menu. Anyone have any clue what's going on here? Thanks again.