Hi everyone, i'm cooking my first ROM with Ervius Visual Kitchen. I used a stock ROM from HTC as a base and I have now since upgraded to build 21916, but after every hard reset I still get the HTC customization screen that gives you 3 seconds to cancel before it installs a whole bunch of useless junk. Is there a way to remove that and cook my cabs and EXTs directly? Thanks!
Additional reading?
Have you checked Chef Central yet? I would suspect that would be very valuable for chefs, new or seasoned.
Ok I figured it out. I had to delete "OperatorPKG" "ConfigAP" "ExtendedPKG" and "OperatorPKG_PT" folders from my OEM folder. But now I have a new problem.
Whenever try to cook Manila 2012 and all of its requirements into my rom, the settings icon disappears from my start menu. Anyone have any clue what's going on here? Thanks again.
Related
Well hardly cooking... All I want to be able to do is to take a base ROM that I like (core 2.0n vanilla or perhaps mfrazz's 1.7) and add the programs that I always install anyway. i figure this will make a hard reset easier if needed and give me a little more memory.
Okay... so I downloaded anchillius's rom kitchen and was able to follow all the directions he provided. I used his core 2.0n, which I have been running for a while but unless I am mistaken installing what I produced would basically be the same thing as installing it directly since it is vanilla anyway, right?
anyway I have a few questions...
1. If I dump a ROM like mfrazz's crossbow 1.7 and install that as is, will the reg tweaks that he made still be there?
2. Is there a readily available step by step on how to add programs. I tried google search and couldn't find anything. I know I am being lazy here but hoping that someone will help a brotha out! that and I am really quite busy at work (but not to busy to not be messing with my phone!)
I'm pretty sure that all the reg changes are the same, I cooked Crossbow 1.7 a little, and nothing changed (that I noticed).
And when u say programs, do u mean by cooking the programs into the ROM with cabs, cuz in this tutorial there is a way on how to install programs by cabs
P.S. While were talking about programs, how do I get the settings for a programs that have to register into a package of my cooked ROM? Is it something in the reg entries on my phone? If so, how do I find out what and how do I get it off of my phone and into the package?
I have just finished a quick lite rom based on Helmi_ C AKU 0.70 rom which I find very stable even for a beta.
Everything Remains the Same apart from what I took out the rom which as follows:
1. Htc audio manager
2. HTC HOME Plugin
3. Office Mobile
4. OneNote Mobile
5. BT_FTP=1_2_30490_1
6. JbedJava_MIDP=0_0_20070726_1_1
7. HTC task manager
8. Voice Speed dial
9. WindowsLive
Rom is working fast with only one bug which i'm trying to fix which is:
After Flashing the rom and after configuration and reset the rom wont boot. But if you reset it before CONFIGURATION the rom works ok as normal. very strange.
I will try to fix it but I have got all the configuration cabs which can be install manual. These files are:
1. Configure_COMgr175.CAB
2. Configure_DDI171.CAB
3. Configure_GPS.CAB
4. Configure_Key.CAB
5. Configure_WLAN.CAB
6. WiFicountrycode.CAB
Total storage memory is 133.16 mb and free program is 74.15 mb
Cabs can be found in my thread which is located here.
http://forum.xda-developers.com/showthread.php?t=332438
Link>>> Rom has got more work to do will fix it as soon I got some more time.
Still a problem with configuration just soft rest before config starts.
Install config cabs below, enjoy
Thanks to POF and OLIPRO for all there hard work and tadzio with contributing in helping us with customising his tools so they can work for kaisers. And thanks to everyone who was helping with the kaiser project.
I will be making or modyfing roms as lite as possible which I think is the best way to go as programs gets updated regular.
reservation
Reservation for updates
cant wait for this lite rom! please dont forget to take out extra junk like windows update and windows live messenger. The more lite the better
duttythroy said:
Coming Soon
Click to expand...
Click to collapse
Why do you do thisto us?
I hope soon means very soon soon
The rom is working fine just need to reset befor it starts its configuration. I will post it as soon as I can. If I find the fix I will post the fixed rom with more stuff taken out the rom.
link is up
link is up
Still a bug with config but cabs are available for now
Awesome, this is the lite ROM I was looking for! Will try it out asap.
cheers
maryjos said:
Awesome, this is the lite ROM I was looking for! Will try it out asap.
Click to expand...
Click to collapse
helmi_c done a great job with the rom I didnt have to do nothing with it might strip it down further for who love ultr lite roms but not losing any stability of course
There is more work to be done on this rom
I realise there is more work to be done on this ROM. First I forgot and allowed the configuration to go on. So I had to reflash (forgot HR would do) and prevent installation of the configuration. I then installed the cabs posted, but device refused to boot after soft-reset
So I am back on Helmi's ROM.
Dutty, you must have removed the power icon in settings as I could not find it to see how much longer I could go on trying to revive my device without running out of power
victoradjei said:
I realise there is more work to be done on this ROM. First I forgot and allowed the configuration to go on. So I had to reflash (forgot HR would do) and prevent installation of the configuration. I then installed the cabs posted, but device refused to boot after soft-reset
So I am back on Helmi's ROM.
Dutty, you must have removed the power icon in settings as I could not find it to see how much longer I could go on trying to revive my device without running out of power
Click to expand...
Click to collapse
same here I must have deleted something in the rom I also found huge battery drain my highly suspicions are one of the activation cabs is causing this.
Sorry guys my first rom didnt made it as yet will pull it down as i think its not stable.
Cheers
My apologies
I have taken down the rom found a huge battery drain in rom.
Well, I installed it and everything went okay. Installed the extra cabs and looked good. I wanted to try WisBar instead of the start menu app I'd been using before so installed their latest versions. Whoops that made a total mess of things, locked up at the end of install and still was locking up after soft resets. So had to hard reset and start all over again. I've not used this app before, so not sure if it was the ROM causing the problem or not.
duttythroy said:
I have taken down the rom found a huge battery drain in rom.
Click to expand...
Click to collapse
Ah, okay, yeah I've continued to have problems with it, keeps locking up on me when doing a soft reset. So guess it wasn't wisbar that was the problem. I'll go back to the standard HTC Rom for now.
to moderators
Can you please close this thread as lite rom has been made by helmi so thus all support should be in that forum. thanks
Hi, I have 3 questions:
1) I've looked around a lot, but can't seem to catch hold of a chinese language for my vox...Its called Dopod rom right?? Where can I get the files and instructions??
2) Does a ROM (when dumped) contain absolutely everything that is on the phone and if flashed on another phone will be a "duplicate" of original phone??
3) I've found the wiki on how to dump my rom, but how would I be able to re-flash it onto another phone??
Thanks guys
Wow somebody who actually read the Wiki before posting - nice
1.It's on the ftp. But look at the stuff that is written in the Wiki, about no Wifi and so on.
2.Nope it isn't it's only the operating system and all the software that comes with it! So no contacts or appointments or other files you put on. When you do a hard reset, you would see what all comes with the ROM! (but don't do it, it'll wipe all your data)!
3.You would have to put it into the kitchen and try to cook a new ROM out of the dump, but look around on the ftp first, there are a lot of shipped ROMs, yours is probably there too!
I can't seem to locate the Dopod wiki... But are there ANY ROMs that can handle chinese text without sacrificing the wifi function??
In terms of the shipped ROMs folder - I couldnt find my one and besides, I'd like to have one with all my programs on. So where can I find easy to follow (I'm a newbie on all this) instructions on cooking and creating a ROM??
(Is this thread the right one: http://forum.xda-developers.com/showthread.php?t=337066 ) ???
Thanks for your help
Recently I download a few tools from here and follow the introduce I tried to cook my first Kaiser ROM, although every thing got all right a lucky greenhand failed to brick his Kaiser, my new rom tell me "NO BLUETOOTH DEVICE DETECTED", I checked files "BlueTooth" and "BlueTooth_Lang_0804" and even replaced it with same files from other rom but it just simply do not work...
I'll be greatful if somebody can spare his time to help me.
BTW, I'm using 20273 Main OS.
BTW2, Please, make your words foreigner friendly.
Thanks all the same.
Why my post can't be seen from the list?
Where did the OEM part of your kitchen come from?
You can get a ready made 20270 kaiser kitchen from ppckitchen.org. Updating that to 20273 is trivial, or you can wait for ppckitchen.org to release it. Not much noticeable difference between 20273 and 20270, however.
A chinese Kaiser form, the developer just said his OEM was not well modified. So I'll have to wait...
Thanks for your attention.
This is my first ROM I'm releasing.
I have created a Danish WM6.5 ROM with 85 MB free ram
I have done everything I can to make it stable and fast. I'm using it myself and I'm very happy with it.
This ROM is based on the latest Danish stock ROM I could get hold of.
I have removed some of the stock programs, and have added the following programs:
Code:
Bluetooth notifier
Mortscript (Un-Installable)
The ROM is extendir enable. You can everything about extendir here
This ROM is created with ervius visual kitchen
I thank everyone that have made this possible.
If I'm distribution anything that I shouldn't or haven't mentioned any people that I should then please let me know. It is not out of respect of other people, it is simply because I either didn't realize that I have used some of their stuff or because I have forgotten.
To use this ROM you must have a storage card for the initial flash.
First you extract the contents of the lagerkort.7z to the root of the storage card, so that you end up with a folder called extendir with a few folders and one file inside.
If you want some cabs to be installed as part of the new flash then copy then to the extendir\setups\<sub folder>. only cabs that are in a sub folder in setups will appear. So make one and only one level under setups for the cabs. (they will not be installed automatic, you get to chose which you want to install, so all all you cabs if you want)
Then you flash the ROM and leave the storage card in for the first 2 boots.
on 1st boot after you have calibrated the screen the customization starts, WM looks awful here, don't worry about this, as this step will extract all of the missing WM files to to the extendir folder.
On 2 boot the preset installer will boot and you can chose a few extra cabs to install and the ones that you have added.
You can download the ROM from here:
4shared
You can download the extra package here:
4shared
Congratulation and wellcome new chef
I suggest you to include some pics because you will be ask for that
Cheers.
Thank you.
Pictures added
Danish rom with Manilla?
Would it be possible to create a version with Manilla? I would really love a danish rom with Manilla and HTC Weather...
Regards Ulrik
I possibly could create one.
But I recommend that you install Manilla after with a cab, or with zip files (in the extender folders) this should give the fastest rom. I can help create the scripts so that Manilla will install on first boot if you want?
hey man i can't get the hardware keyboard to input properly for æ, ø, å. I looked through your cabs but don't see a fix do you have one?
I tried this SkandinaviskTastatur5.CAB and XDA_JCEspi2005_Danish_Input_Kaiser.cab neither of which work. Let me know if you have a solution
I have a danish keyboard on my too, and the mappings are just fine on that one. So have no idea what could be wrong, unless there are more than one version of a danish keyboard. I access my æøå by FN and <UP><DOWN><UP> respectively.
I forgot to mention that I'm using a different rom to yours. Maybe you need a Danish WM 6.5 to get the hardware keyboard to work. If you could help me out in anyway that would be awesome cause it's a bit frustrating hunting around to find ? and stuff heh
Ahh that explains.....
I have no idea how to get the danish keys then. If I knew what to put in it I could create a CAB file for you, but I really have no idea what to put in to this cab...
I had the same problem when I used WWE roms, and never got it sorted.
@ Blindpet, try doing this:
Use a registry editor and change the following:
HKEY_LOCAL_MACHINE\Hardware\Devicemap\Keybd\CurLang to 1044, this worked for me
I tried your ROM and overall its pretty good but i dont know if its my phone thats not set up properly but this rom have got a lot of screen lag though.
Anyway would be great with a proper danish rom for this great phone, keep up the good work
//KillerBee
EDIT: This solution doesnt work for me now.. I am not quite sure how you are supposed to change the HW keyboard language for a winmo 6.5 phone