Well hardly cooking... All I want to be able to do is to take a base ROM that I like (core 2.0n vanilla or perhaps mfrazz's 1.7) and add the programs that I always install anyway. i figure this will make a hard reset easier if needed and give me a little more memory.
Okay... so I downloaded anchillius's rom kitchen and was able to follow all the directions he provided. I used his core 2.0n, which I have been running for a while but unless I am mistaken installing what I produced would basically be the same thing as installing it directly since it is vanilla anyway, right?
anyway I have a few questions...
1. If I dump a ROM like mfrazz's crossbow 1.7 and install that as is, will the reg tweaks that he made still be there?
2. Is there a readily available step by step on how to add programs. I tried google search and couldn't find anything. I know I am being lazy here but hoping that someone will help a brotha out! that and I am really quite busy at work (but not to busy to not be messing with my phone!)
I'm pretty sure that all the reg changes are the same, I cooked Crossbow 1.7 a little, and nothing changed (that I noticed).
And when u say programs, do u mean by cooking the programs into the ROM with cabs, cuz in this tutorial there is a way on how to install programs by cabs
P.S. While were talking about programs, how do I get the settings for a programs that have to register into a package of my cooked ROM? Is it something in the reg entries on my phone? If so, how do I find out what and how do I get it off of my phone and into the package?
helloooo,everybody
i used ImgfsTools 2.1rc1 and followed bro Tadzio's introduction to cook my rom based on helmi_c's rom~
everything goes well
after NBMerge, i used dutty's tool to generate the os-new.nbh
and flashed it with pof's KaiserCustomRUUv1
but just 1%,my device rebooted and the KaiserCustomRUUv1 tells:
error 244: INVALID MODEL ID
it was still though i didnt modify anything in 'dump' directory
if i flash helmi_c's rom directly,that would be successful
what's wrong i have done? any tips?
forgive my broken Englsh pls...
REGARDS
Sheng
did you flash HardSPL to your Kaiser first?
heh... I had the exact same problem as yours (invalid model id). Using HTC Rom tool, I forgot to set Kaiser as the target ID for the nbh & it defaulted to hermes (I've since edited the ini file to change this).
yea.
i've got HSPL already and i have flashed the other roms many times, thats no problem.
fortunately that error just made my tytnII reboot and i can enter today screen,nothing change at all.
regards
Sheng
i believe your question was just answerd above and i also take it as SLEUTH getting a kaiser? thats cool man welcome to the new club house
woohyuksheng said:
helloooo,everybody
i used ImgfsTools 2.1rc1 and followed bro Tadzio's introduction to cook my rom based on helmi_c's rom~
everything goes well
after NBMerge, i used dutty's tool to generate the os-new.nbh
and flashed it with pof's KaiserCustomRUUv1
but just 1%,my device rebooted and the KaiserCustomRUUv1 tells:
error 244: INVALID MODEL ID
it was still though i didnt modify anything in 'dump' directory
if i flash helmi_c's rom directly,that would be successful
what's wrong i have done? any tips?
forgive my broken Englsh pls...
REGARDS
Sheng
Click to expand...
Click to collapse
Better than dutty's NBH tool, get the Dark Simpsons tool here with Kaiser support...
http://forum.xda-developers.com/showthread.php?t=311909
Cheers.
austinsnyc said:
i believe your question was just answerd above and i also take it as SLEUTH getting a kaiser? thats cool man welcome to the new club house
Click to expand...
Click to collapse
Thanks.... the Hermes was getting too reliable (boring)
Seems thats also now the case with the Kaisers lol... Tazdio's tools work great now after about 2 weeks of flashing roms that didnt work lol...
Oh I dunno... that pesky gps acquisition bug needs fixing and the PIE scroll freeze issue is a cooked in only patch so far. Tadzio is going to send me an updated toolset too itnf hopefully.... I'm itching to flash up a quick personal version with reghacks/PIE fix & maybe a different External GPS app. I may even adapt the hermes GPS RIL shim to express the Kaiser GPS on COM7 so the hermes external GPS applet can handle it.
so that scroll freeze issue in PIE doesn't just happen to me?! what a freakin relief!!!!
It's a real PITA for sure.... I've tried to make a cab to fix it but my initial attempt trashed my phone's RIL for some reason. I'll look at the dependencies more soon...
Ok any hints or ansewers would be greatly appreciated! How do you guys get the newest versions of CE into your roms?
I am thinking you just get the official roms and use kaiser kitchen to extract them correct? Well so far ive tried the almost official winmo 6.1 rom for at&t, ive tried ddk.05, ive also tried laurentius v9. Everytime i extract these roms all the folders OEM, SYS, and ROM are pretty much empty?! I'm not look'in to rip people off i just want to get a base version of ce wich is compatible with radio 1.65.20.29. The roms in alex's kit 3.03 and 3.02 have alot of issues with the 1.65 radios.
Ive tried everything i can think of, am i acually maybe suppose to dump the rom off the device then rebuild it? Instead of trying to extract from the .nbh?
I mean im assuming all these 3.55 roms were mogul roms at one point right? and they just copied all tytan 2 drivers over?
I also really like ddk.05 i just don't think the page pool is big enough it seems to me whenever i run the page pool tool nothing happens. I select the rom then i click the size then change too and close. But the device always reports the same amount of free memory no matter what i set the page pool too. I like i a huge page pool because i play PocketQuake and it helps speed it up. Going from 18 to 32mb page pool sped quake up 2fps. I dont usually have alot off apps open either.
Problem is that you are trying to cook a ROM from a cooked ROM. Meaning you are taking ROMS like ddk.05 which is already cooked from the member.
Alot of members are using different tools then KaiserKitchen in order to cook their roms which in turn means there will not be any .rgu's or files in many folders.
Your best bet is trying to cook a rom based off of the ATT 19213 version...just type ATT 19213 in search and look for the rom. it should be around 118mb when downloaded and extracted.
Thank you! ill do a search around for that, but im still wondering where they get these new builds of ce, do they just dump them from devices?
Oh shoot i just realized http://forum.xda-developers.com/showthread.php?t=391708 is the build your talking about. I already downladed that and then tried to extract it with the kitchen and it was completely empty.
My XDA Live 3 Rom is based on the at&t 19213 Rom and it has the RGU files intact.
As for getting the updated OS, yes they are taking OEM Diamond Roms and extracting the files from there.
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
Bro , i hope you can make this work , cause i think most of the ppl will be much appreciate !!! Keep it up .
buddy, i need it.
hope we can figure out and make a CAB for it.
good luck lol
zenkinz, no hurry.
Being waiting for it.
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
I've just looking for this! Can anyone please help!
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
I've been looking for it for a long long time ago...
but i cant find any workable CAB of it.
so thats why i still keep my LEO as default 1.48 ROM..
and now, Thanks for your hard working,
I can try the newest 2.01 ROM.
I *think* I might have found the problem but I need to flash a custom ROM to test it. If anybody is game to try it on their custom ROM, please pm me your email address and I'll send you the CAB. The reason why I'm not publishing it here is because it might cause you to hard reset your phone if it didn't work out (as happen to one of the 'early adopter' user)
zenkinz said:
I *think* I might have found the problem but I need to flash a custom ROM to test it. If anybody is game to try it on their custom ROM, please pm me your email address and I'll send you the CAB. The reason why I'm not publishing it here is because it might cause you to hard reset your phone if it didn't work out (as happen to one of the 'early adopter' user)
Click to expand...
Click to collapse
I'm looking for a RIGHT ROM to try.
I'll let your know when i'm ready.
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
zenkinz said:
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
Click to expand...
Click to collapse
I volunteer to try your cab, and report back soon!
I've tried it, but it didn't work. when inputting sms contact names, no name suggestions available. and the Pin Yin didn't work at all. And when I tried to uninstall and reset the device, the whole device couldn't boot, I was forced to hard reset my HD2.
precsmo said:
I've tried it, but it didn't work. when inputting sms contact names, no name suggestions available. and the Pin Yin didn't work at all. And when I tried to uninstall and reset the device, the whole device couldn't boot, I was forced to hard reset my HD2.
Click to expand...
Click to collapse
I was having the same problem as well . Hope there will be a refine version .
zenkinz said:
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
Click to expand...
Click to collapse
I tried it on PDAVIET V05 28014
I can call it out but the hand writing does not show the line when you draw on the screen, when using the 筆畫 it just show the E T U D G instead of chinese.
ok so it looks like I really have to use a custom ROM to test myself, as my fear is that the existing registry in the pure english rom conflicts with the CAB.
this will take awhile unless somebody adventurous could trace the original ezinput registry and identify any potential conflict to the chinese input. (but doing so will also mean you will need to hard reset ur device after the troubleshooting)
Hi, zenkinz
Thanks for your effort.
Can you create a tutial or CAB for LEO custom ROMs (like Dutty's, Xanny's ......) to add Asia support? (just capable of viewing, not UI localized)
You can try to analyse the cabs from Lingvosoft, as they offer asia input keyboards.
I am using their Japanese Keyboard. This will show up the keyboard.
But the keyboard alone is not enough, you need copy a chinese font from your desktop windows to the windows\fonts folder on your Leo.
Then you will have to change the standard font in HTC manilla or Windows 6.5 if you want to be able to display the characters in the main applications (unless that application offers font selection).
I have attached the Chinese and Japanese keyboard cabs, as well as the Chinese font (ming true type font). Those are from the trial version of their translation suit, but I think the keyboards don't require a license (except for use in the translation application, then they get barred).
zenkinz said:
ok so it looks like I really have to use a custom ROM to test myself, as my fear is that the existing registry in the pure english rom conflicts with the CAB.
this will take awhile unless somebody adventurous could trace the original ezinput registry and identify any potential conflict to the chinese input. (but doing so will also mean you will need to hard reset ur device after the troubleshooting)
Click to expand...
Click to collapse
sorry to say that my voluntary offer ends there. The problem is if there is a problem, I cannot uninstall it and revert to previous state, and also, worse is, the entire rom couldn't start. I can't take too much trouble to try it unless it can be reverted easily.
precsmo said:
sorry to say that my voluntary offer ends there. The problem is if there is a problem, I cannot uninstall it and revert to previous state, and also, worse is, the entire rom couldn't start. I can't take too much trouble to try it unless it can be reverted easily.
Click to expand...
Click to collapse
the following file is come from one Taiwan WM site,
anyone if have interest, can try it out.
seem that someone work fine with the file.
http://www.badongo.com/file/18581778
if you can read chinese, you can check with the following link,
also discussing about the Touch Input 2.0
http://www.mobile01.com/topicdetail.php?f=129&t=1317192&last=16027178
cmant said:
the following file is come from one Taiwan WM site,
anyone if have interest, can try it out.
seem that someone work fine with the file.
http://www.badongo.com/file/18581778
if you can read chinese, you can check with the following link,
also discussing about the Touch Input 2.0
http://www.mobile01.com/topicdetail.php?f=129&t=1317192&last=16027178
Click to expand...
Click to collapse
thanks for the link. From the thread, it looks like the thread start has the same problem as us, I will read further to see what's the missing dll/registry.
Hi all!
I am actually trying to cook my first ROM for my Topaz, and I'm encountering several difficulties . Actually, my biggest problem for the moment is about the EXT packages.
First, I need to have something clarified : EXT packages depend on the device you are using, right? So for example, you can't use the same packages on both a TP2 and a Topaz.
Because then, I can't find the latest packages released for the Topaz, so what am I supposed to do to get them? How do the chefs do to find theirs?
Just for precision, I'm using visual osKitchen.
Thanks in advance.
Does anyone knows anything that might help?
Try the Topaz WiKi!
Try the Topaz WiKi!
Have fun,
Hi Senax,
Thank you for your link! I found plenty of interesting and helpful information!
But I 'm still blocked, I couldn't find any recent EXT packages for the Topaz. Is there a place where they are uploaded and where I could download them? Or is there another way to find them?
The only package I have is the one I get when I imported the last official ROM from HTC, and oskitchen won't allow me to import cooked ROMs, I get an error... (which I actually find quite normal, it would be like copying the other chefs' work, and I don't want that either)
And from what is written on most chefs' ROMs presentation pages, I can see that my EXT package is already quite outdated.
Thanks again for your help.
I found some another links
I found some other links;
Topaz OEM & EXT Package Repository
CAB/OEM Package Converters
CAB2OEM
CAB to OEM to EXT GUI Suite
Package Creator
Also have a look here.
Hope this helps, have fun,
Senax
Okay, thanks again for your help Senax! I'll start my work with that.