Database Info

HELP ME FOR LANGUAGE PDA + ACCESS TO ROM FOR YAKUMO ALPHAX

Have A Yakumo Alphax Gps With Win Mobile 2003 In German.
I Am An Italian And I Would Change The Language.
Is Possible ??
I Would Enter In The Utility Of Flashing (bios Of The Palm)
Somebody Can You Help Me To Enter ???
Thanks For All

hi i have de same problem, i have found the procedure to flashing Deltax but not for alphaX, for deltaX i think that fila come from MIO168.
i have test this procedure but that work not but if i set reset button on (links) then i set this button of (right) and in the same time i push on de ON button i come on a screen in wish i see DOWNLOAD IMG EBOOT 6.2. i have test with the file from MIO168 on my sd card but nothing but i think that is a good start point, follow me we must found correct file and correct^path in which we must put file to start the download....
have you found a solution at this time i will at least in english or better in french.
i have send a request to yakumo but no answer at this time
Thanks in advance

hi,
i have use rom of ACER N35 english and that work fine, i have found that on the support site of acer (in the ftp link)
put all file on SD card
ensure that PDA is full charge
hard reset
the put hard reset switch in on and in de same time push on button 5 sec
normaly y must seen on blank screen SD ....
then y can seen progression af the installation
all is automatically...
when installation is executed PDA restart en then you receive de gingle wich say that you must calibration to do
i'm not responsible if that work not on your PDA but for my its wery good
mary Xmas

Move it Please!!!
This is the wrong place to post problems.
***MODERATORS*** , Could you please move this post to the appropriate section??, thanks.

ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR

When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent

Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M

Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears

I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M

Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards

The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???

Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M

Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update

I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M

Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english

Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M

thanx
Ok thanks a lot
regards

Greek ROM for the prophet

Please use this thread
http://forum.xda-developers.com/showthread.php?t=283676

Thx mate.
What this package include exactly!
Pes mas liga pragmata gia na kseroume ti na perimenoume na doume.
Se eyxaristo opos kai na exei.

This is Ace Hellas's greek rom. Two files are patched to bypass IMEI check.
This version has a problem with smartdialing.
I might upload a newer one later.
The package includes just a .nba file (to be used with awizard).

Thx andrew.
I will try it and I'll give a feedback.

chrismc said:
Thx andrew.
I will try it and I'll give a feedback.
Click to expand...
Click to collapse
Actualy don't try this version.
There is a problem with smartdialing (one .dll got ****ed up)
Otherwise it works.
I'll have to upload a new version which doesn't have this problem.
I didn't do this earlier because I thought no one was interested

Ok. thx for warning me.
I'll wait for your next ROM upload.

Hellenic ROM for HTC Prophet (Qtek S200) by andrew_sh
Instructions:
1) Update the phone using ROMUpdateUtility.exe
2) After installing Ext. Rom, you will see a Security Prompt. Select allow.
3) Wait for a few seconds, the device will reset automatically
NOTE: If you do not get the security prompt, do the following:
a) Press and hold the D-PAD button
b) Press and hold the battery Icon
c) Release both
d) Tap "Εκτελεση" (Ektelesi - Run)
e) type "langbootcheck" and tap Ok
f) Select Allow
g) Wait for a few seconds, the device will reset automatically
The nk.nbf contains no bootloader (only OS and Ext. Rom), so this minimizes the
risk of something going ROM.
NOTE2: As everything else, USE AT YOUR OWN RISK - FOR EDUCATIONAL PURPOSES ONLY
NOTE3: This ROM is copyright by ACE HELLAS - Use only for EDUCATIONAL PURPOSES unless
you own a device purchased from them.
Credits:
Marker - for inspiring me
maimach - for the wm5editing tools
itsme
and to all people who helped create nice tools like awizard
Download Link
http://rapidshare.de/files/24201146/RUU_Prophet_ELL_by_andrew_sh.rar.html

[email protected], no response after update.
I get this screen of red, green, blue colour.
IPL 1.00
SPL 2.15
Any ideas how to recover?

OK, panic is over. :shock:
I installed the previous ROM (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID).
I took off the battery, put USB and run ROM Update Utility. :lol:

The phone will probably need to be cid unlocked first. I can't tell because mine was cid unlocked anyway

What is cid unlocking? and where can I find info about it?
(Just send me links in order not to get out of subject)
Thx

andrew_sh thank you very much!!!
at last i have a complete greek rom in my qtek s200 even though my spl was different than yours
Guys don't be afraid ....... try it!
I have even greek t9 in phonepad !!!

jimbou, give us instructions if you can in order to take sdvantage of andrew's posted ROM.
Thx in advance

Use the instructions of andrew_sh to do it
If your SPL is 0001 you will have no problem, but if it is 0000 you won't be able to do it
Then you will have to do what i did:
you need these two tools:
TyphoonNbfTool_04.exe and
aWizard-v1_2 (avoid using version 1.3, it didn't work for me)
1.with thyphoonnbftool you decrypt from nk.nbf found in greek rom, a new file named OS.n_d and rename it to OS.nba
2.use awizard and in options menu first do rapi unlock, then cid unlock and finaly press w to flash the new rom.
3.wait about 20-25 minutes
4.hard reset and you have a greek rom in your prophet
5.In my case there was a little bug, but thanks to andrew_sh 's instructions i managed to overcome it. There was no start menu, no settings, nothing.If you experience that, then keep middle key of the d-pad pressed and also keep pressed with the stylus the battery icon on the top right corner of the screen.A menu will appear and you will press ektelesi.
Then write langbootcheck and press ok
It is done!
you have a greek qtek s200!

Thx. I'll try it

What version is the greek rom? Is it the latest 2.09 ?
Thank you.

Yes, i think it is 2.09

no, it is not 2.09.
it is the one before 2.08.
If I see many people interested, I could do something about the 2.09

hi guys, I hope this is not irrelevant.
Is there a way to be able to switch to greek whenever I want to write an sms or update a contact with out replacing my rom (NL rom works fine so far).
In other words to be able to use more than 1 language for messaging, notes etc..
Thanks! Efxaristw!!

greek sms
file egw evala to resco keyboard kai tin wra tis eggatastasis epilexa greek tin primary kai einai teleia. mporw na grafw ellinika kai na vazw kai tonous!!!

Problem Install Avaya one-X Mobile WM6

Hi This is the link to download the software it is FREE from Avaya Web Site
http://support.avaya.com/japple/css/japple?temp.documentID=321884&temp.productID=251422&temp.releaseID=321115&temp.bucketID=108025&PAGE=Document
SEE The Attachment

Can some One Help
maybe i can change the cab to support WM6

installed fine on mda running tnt 5.0 with htc home no touchflo running radio 2.19.11 on tmobile us, it has sssooooooo many settings i am losing hair figuring it out...but looks like an awesome software..

i have test it
on wizard with wm6 tnt it is installing but on wm6 NBD 7.4 Not
Can you Help

i think you might have to ask the rom cooker, for nbd 7.4, i am not as knowledgeable as the cookers, i just tried it and it worked, maybe go thru all the registries and compare... maybe some modules or files missing... why not use the tnt 5.0? good luck, sorry couldnt help much.

Avaya One-X 4.0.25 on WM6
Installed and working on Kaiser WM6 !
Manual install process :
1. Unpack the attached ZIP file with subfolders.
2. Copy all the files to the appropriate folders on your PDA.
3. Change the registry according to the attached registry.txt (change 2 keys and create 4 new)
4. Completely turn off your PDA (to renew the registry). Reset button does not work.
5. Switch the device on.
6. In order to enter the PIN code do: Start -> Settings -> Phone -> Entere your PIN
Now you have an Avaya One-X as a dialer.
Enjoy !

[ROM] Imate SPL 6.1 ROM

G3:
http://rapidshare.com/files/128277343/G3_en_WMUPDAT.7z
G4:
http://rapidshare.com/files/124856283/Imat...6.1_EN.rar.html
If you are G4 version
you may use the G4_WMIPL.zip (136.2 KB)
unzip it and copy WMUPDAT.dip and WMIPL.dip
to the SD card
and press 6+power to flash it.
G3 only need one file(WMUPDAT.dip).
-----------------------------------------
如果你是G4的型号,解压附件的G4_WMIPL.zip
把WMUPDAT.dip 和 WMIPL.dip拷贝到sd卡上
按6+开机键开始刷机,G3只需要一个文件。

Thank you very much!

see you again, alechy,

Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.

onestoploser said:
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
Click to expand...
Click to collapse
是的,你当然需要那个WMUPDAT.dip去升级。
G3和G4是不一样的!
你可以再试试。

Alechy: Can you post your 文件名: I-MATE SPL G4 WM6.1 ROM V2 BATE2 080619.exe here? I can't read Chinese to download it from here: http://bbs.ucweb.com/redirect.php?tid=209308&goto=lastpost

Moving in
Collection of Rom's found off Chinese sites by two developers alechy and VYVVYK. Descriptions below are from the Chinese sites translated to English, so they are not mine. I have not tested them so use at your own risk!
WM5.0
Shipped WM5 downloaded from I-Mate:
http://rapidshare.com/files/131789782/ruu_spl_wwe.exe
Extracted WM5 from above shipped rom:
http://rapidshare.com/files/131789778/TF_WM5_i-mate_VER_01.09_5.1.342_15096.3.0.0_.rar
WM6.0
http://www.handsky.cn/thread-63962-1-1.html
G4WM6ROM:
(Marchese: installed via miniSD & data cable on 2nd try, defaults to Chinese with English available in Regional Settings, WMP & IE keys work, charging light works, apps unlocked, no SDHC support. This appears to be a stock WM6.0 Chinese Rom dump made flashable by alechy. Though Chinese, it has regional setting for about 12 countries. [/url]
http://www.fs2you.com/files/8a85dfcc-1912-11dd-9413-0014221b798a/
http://rapidshare.com/files/131721703/G4WM6ROM.rar
Perfect version G4WM6ROM
G4 WM6 G4 WM6 perfect version ready, add a number of useful software, modify the system
configuration, the power inside to increase the screen brightness adjustment, integration A4, Plum
input method (in the auxiliary switch inside option)
http://www.fs2you.com/files/b93560b0-1b29-11dd-a00c-00142218fc6e/
http://rapidshare.com/files/131721699/Perfect_version_G4WM6ROM.rar
End version G4WM6ROM
The update more, a lot of vvvvyky learn from the experience, and then stole a point from procedures.
Oh my goal is: Integration of the integrated software, do not have to delete the software, not with
software start-up……
TU, let me think about what this amendment it (for a perfect version of G4)
1. Camera adjustment
\my documents\my pictures The default storage location for the sd card \ my documents \ my pictures
2. Brightness from two to three
3. Integrates some commonly used software, such as flying letters, etc.
4. Extrom amended to add a few interesting comparison software
Can be installed in the annex to the optional software installation
There are still some details on the adjustment of the
5. Restore a functional Stk
6. Adds that drive high-speed SD card (not aware of no use)
This rom without major problems, will no longer update
Named special version of the end.
Download:
http://www.fs2you.com/files/a9bf7e82-2564-11dd-8b96-0014221f4662/
http://rapidshare.com/files/131789777/End_version_G4WM6ROM.rar
WM6.1
ImateSPL WM6.1 G4 by Alechy
(Marchese: installed via data cable, default English, WMP & IE keys not working (I-Mate-SPL_WMP-IE_Keys_Fix.cab), charging light not working (I-Mate-SPL_LED_Fix.cab), apps locked (spl_ApplicationUnlock.exe from PC), no SDHC support.
http://www.modaco.com/content/i-mate-spl-spl-modaco-com/269040/imate-spl-wm61-rom/
http://rapidshare.com/files/129995177/TF_WM6.1_i-mate_VER_3.01_5.2.19202_19202.1.0.0_.rar
I-Mate SPL WM6.1 ROM V2 BETA2 080619 BY VVVYKY Published
(Marchese: installed via miniSD, default Chinese but can change region to English with some Chinese, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, working SDHC support!!!)
06/14 V2 BETA1 update:
Fully unlock (not because of competence certain procedures can not be installed)
I join the sliding panel display process to join the sliding panel display by adding capacity to integrate the theme palette weather procedures and related topics, such as adding. 。 . 。 . 。 . 。 .
BUG Camera frame model can not be repaired by the BUG
Camera repair procedures
4.0 MMS 4.0
HTC SDHC card integrated high-speed drives (to support more than 4 GB of memory card)
Integrated jbed 20080222 version of the j ava, such as. 。 . 。 . 。 . 。 . 。 . 。 . 。 . 。 . 。 .
The default shortcuts are as follows:
Custom integrated software keys AEBPlus2.62
Short by touch -> Task Manager
Under the touch -> File Manager
Short by music keys -> WMP player
Under the music keys -> mobile thumb drive
Short camera button -> camera
Under the camera button -> Notepad
http://rapidshare.com/files/132479312/I-MATE_SPL_G4_WM6.1_ROM_V2_Beta2_080619.exe
http://translate.google.co.uk/translate?u=http%3A%2F%2Fbbs.ucweb.com%2Fviewthread.php%3Faction%3Dprintable%26tid%3D209308&hl=en&ie=UTF8&sl=zh-CN&tl=en
G4WM6.1 ROM XIP 20202 faster! (Strongly recommended)
(Marchese: installed via miniSD, default Chinese, no English available, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, no SDHC support.)
This version is still relatively good, a lot of integration software,
Shuawan not installed basic software! Strongly recommended! ! ! ! !
http://www.handsky.cn/thread-63962-1-1.html
http://www.fs2you.com/files/b874f5dc-3f69-11dd-b728-00142218fc6e/
http://rapidshare.com/files/131721701/G4WM6.1_ROM_XIP_20202_faster.rar
Imate SPL G4 WM6.1 96DPI 20080724 released
(Marchese: installed via miniSD, default Chinese, no English available, WMP & IE keys working but linked to other apps, charging light working, apps unlocked, no SDHC support.)
Repair MMS, changes to the default keyboard lock-time escalation of the letter and ucweb.
Recommendations: Close chome commonly used software (Bumei Guan)
http://www.fs2you.com/files/71838157-5935-11dd-bf1b-001143e7b41c/
http://rapidshare.com/files/132619070/Imate_SPL_G4_WM6_96DPI_20080724_by_alechy.rar
http://translate.google.co.uk/trans...d-63962-1-1.html&hl=en&ie=UTF8&sl=zh-CN&tl=en
MISC:
For after upgrading: xT9, Overclockers, network con figurer, apps & games included in shipped rom
http://rapidshare.com/files/131723239/i-mate_spl_wm6.1_after-upgrade_v1.rar
Install from SD:
http://forum.xda-developers.com/showpost.php?p=2239393&postcount=44
Wiki:
http://wiki.modaco.com/index.php/I-mate_SPL
http://translate.google.co.uk/trans...-339048-1-1.html&hl=en&ie=UTF8&sl=zh-CN&tl=en
http://amoi.it168.com/thread-339048-1-1.html
COOKING TOOLS:
http://rapidshare.com/files/131721695/WM6_ROM__32534___36753___24037___20855__Puma-T_-Cooking.rar
G4 custom templates (for cooking):
http://www.fs2you.com/files/ea94d92e-35dc-11dd-ab23-00142218fc6e/
http://rapidshare.com/files/131721698/G4_custom_templates.rar

led indicator tweak
can anybody post the reg tweak or workaround for the led.
tnx

LED Fix and WMP & IE keys Fix
dielo said:
can anybody post the reg tweak or workaround for the led.
tnx
Click to expand...
Click to collapse
The zip file contains LED info from the kitchen posted above. I created the attached cab file using the zip which works on my spl. You will need to app unlock first. Test at your own risk.
Just found the reg values for WMP & IE keys. The WMP & IE keys are much more responsive using the reg fix over AE Button Plus. Worked for mine but use at your own risk.

THANKS!!!
marchese said:
The zip file contains LED info from the kitchen posted above. I created the attached cab file using the zip which works on my spl. You will need to app unlock first. Test at your own risk.
Just found the reg values for WMP & IE keys. The WMP & IE keys are much more responsive using the reg fix over AE Button Plus. Worked for mine but use at your own risk.
Click to expand...
Click to collapse
mhan finally someone replied and gave me these nice fix...thanks mhan...
btw i still encounters some problems with alechy's rom:
1. it always hang when i access storage card thru file explorer and i only have 1gb minisd. i hope theres a fix for this.
2. typing on sms is too slow....could there be any tweak to make it faster or more responsive?
i believe the other roms are better but they are not fully in english.
thanks again mhan.

dielo said:
i believe the other roms are better but they are not fully in english.
thanks again mhan.
Click to expand...
Click to collapse
I sent alechy a pm and email requesting an English version of G4WM6.1 ROM XIP 20202 faster and add SDHC support. alechy's previous 6.1 EN rom has easy to read font and is all English, and his newest CH rom has .net 3.5.
Let us hope alechy finds some time to do this for us.

marchese said:
I sent alechy a pm and email requesting an English version of G4WM6.1 ROM XIP 20202 faster and add SDHC support. alechy's previous 6.1 EN rom has easy to read font and is all English, and his newest CH rom has .net 3.5.
Let us hope alechy finds some time to do this for us.
Click to expand...
Click to collapse
yes that woulb be really great...im having a hard time looking for language pack like in a cab for easy installation...let us hope he will do it.

Currently the Best WM6.1 English Rom for Puma_T
Install "ImateSPL WM6.1 G4 by Alechy" (Chinese sites suggest SD installation is most reliable)
Install reset.cab
Connect to a PC for apps unlock using spl_ApplicationUnlock.exe and restart phone
Install xT9 English
Install I-Mate-SPL_WMP-IE_Keys_Fix.cab
Install I-Mate-SPL_LED_Fix.cab
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
Install I-Mate-SPL_SDHC_Patch.cab
Enjoy!

marchese said:
Install "ImateSPL WM6.1 G4 by Alechy" (Chinese sites suggest SD installation is most reliable)
Install reset.cab
Connect to a PC for apps unlock using spl_ApplicationUnlock.exe and restart phone
Install xT9 English
Install I-Mate-SPL_WMP-IE_Keys_Fix.cab
Install I-Mate-SPL_LED_Fix.cab
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
Enjoy!
Click to expand...
Click to collapse
can you post the these cab files:
Install reset.cab
Install xT9 English
Install SIM network configurer
Install overclocker (max 216-220 recommended on Chinese sites)
thanks

I-Mate SPL SDHC Support Patch
THIS IS IT!!! Just had a coworker help me set up an account on it168.com. I tested the patch, and it worked with my 2gb Sandisk mini SD and 4gb A-Data micro SDHC with adapter. Enjoy!
http://amoi.it168.com/viewthread.php?tid=344272

dielo said:
mhan finally someone replied and gave me these nice fix...thanks mhan...
btw i still encounters some problems with alechy's rom:
1. it always hang when i access storage card thru file explorer and i only have 1gb minisd. i hope theres a fix for this.
thanks again mhan.
Click to expand...
Click to collapse
Hi dielo,
I did a FAT - Format to my MiniSD with the adapter and that solved the problem... Hope it work for you.

carlos_polanco said:
Hi dielo,
I did a FAT - Format to my MiniSD with the adapter and that solved the problem... Hope it work for you.
Click to expand...
Click to collapse
actually its working fine right now even i didnt do anything yet...

dielo said:
actually its working fine right now even i didnt do anything yet...
Click to expand...
Click to collapse
Hi Again,
That happened to me too, I thought it was fixed but if you try playing some files from the SD It will freeze your phone.
Good luck

onestoploser said:
Hi. Complete noob here. I have never flashed a phone before and have a few questions. The attached .zip only contains the " WMIPL.dip " file and the rapidshare link for the G4 .rar file is not working. Do I need the other file " WMUPDAT.dip " to upgrade? Is it the same file as the G3 one? Also, has anyone tried this yet? I use my SPL as my main phone and don't want to brick it.
Click to expand...
Click to collapse
Hi. Silly question: how to check if my SPL is G3 or G4? thanx for reply!

Indentify Version - G3 or G4
emde18 said:
Hi. Silly question: how to check if my SPL is G3 or G4? thanx for reply!
Click to expand...
Click to collapse
Two methods:
1) http://forum.xda-developers.com/showpost.php?p=2239393&postcount=44
2) Boot screen is different for G3 and G4, search around spl.modaco.com for screen shots.