Related
Hi guys
Ive recently got my jammin and have found that without installing the extended rom the device speed is alot better.
Bu theres 1 prog in the extended rom that i use alot which is the phonepad ...Ive found the cab located in the rom but the problem is the cab also install the voice app / pdf viewer and java app.
Is there a cab available thatll just install the phonepad and nothing else?
Thanks
if you post the cab we can easily extract the parts you don't want, or you can do it yourself with WinCE Cab Manager
Ok brilliant ive attahced the cab
Thanks alot
This cab doesn't install the voice cab or anything like it.
It makes 4 shortlinks and addssome values to the register, that's all it does.
so it just installs the phonepad...is there anyway of deleting all the etxra links .etc .etc and just it installing the phonepad ?
No it doesn't install the phonepad, in fact it doesn't install any software at all, this cab.
However you can delete the shortlinks, located here; /windows/start menu/
But remember you still don't uninstall/delete the actual software.
Ah , ok ....so do you know the phone pad (touchpad thng for texts .etc .etc) ....Not smartdialing program...Is this actually located on the rom itseld or does it install from the extended rom.
As i thought it was installed form the extended rom but now this as got me thinking its hard encoded in the rom itself?
Is this rite on HTC devices?
Thanks
The touchpad itself is included in the rom, however I've seen you can enable/disable some of those input pads with some registry settings.
Unafortunatly I don't know what settings and if it can be done on all htc devices.
On my wizard it's enabled by default.
ok ,Thanks for the help / info
When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards
Hi all,
I took out this thread from
WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB for Himalaya
and cooked a ROM with minimum applications.
Operator has set to O2.
Applications Not included.
Smart Dialing
Scenario
Call Filter
ZoomSMS
and more, comparing to WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB
I find buggy with Eten Dialer running on Smart Dialing.
Included.
Calculator
Camera Fix (patch)
Eten Dialer (skin, u got to install from below link)
http://www.howardforums.com/showthread.php?t=886355]here
My ROM link is here
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
please note.
In order to use Tweak2k2, please install NETCFv2.wm.armv4i.cab (about 5 MB)
If you are installing Resco Explorer & Regedit.
Please seperate the installation.
Resco Explorer can be installed into RamDisk
Regedit has to be installed into Device
Any applications that requires Core OS, have to be installed in Device.
Example:
Pocket Informant
MCM (Microsoft Voice Command)
SPB Weather
SPB Plus
If you are using Pocket Mechanic, bared in mind, do not remove registry that you are unsure, as the application will just scan though your registry and display all unwanted registry.
Once deleted, your Camera - Video wont be working anymore.
/Cheers.
Disclaimer: use at your own Risk. I dont take responsibility if your device crash.
ROCKON!
thank you dude for the hard hard work.
i can never get this cooking to work! i dont know how ou guys get it done!
but we appreciate the free mooching!!
flashing it right NOW. will let you know what happens
Good job dear, Go on!!!!
1. Have you put in this the MS PPT?
2. If you have removed every thing from this then you could very well pack NETCF 1.0 or 2.0SP1 in it. It is just a suggestion. Only my opinion......
My good wishes to you...
Hi Master,
Seriously speaking, i still a noob here.
Since u told me about the PPT (Mobile Powerpoint) was not install from ur ROM, so i did not, but just use back your ClearView.
What i did was meddling your OEM folder.
Is good to have those Mobile PPT back instead of ClearView, and pre-install NETCF v2 or v1, i really sorry that i have no idea how to do it.
because i read BuzzDeV's forum.
Try to do those rgucomp to get the registry out, and default.hv/user.hv
still dont understand how everythings works.
I did installed Registry Workshop or Hex Editor, even i manage to open the Registry, i see things that i dont wish to see there, but again, if i remove, i dont even know where those registry links to which files.
haha, basically, i am just a noob who only know how to meddle the OEM folder. haha.
I did try to use Tof_clock ROM, but because his already packed everything together, likewise, your 3.00 is seperated into different folders, just need to remove or add links to OEM folder.
Hope i did not disappoint u for not able to fulfill your suggestion.
BuzzDev Forum has the Rom Kitchen thread, too many useful tips, but i just cant get to understand their explanation. lol
I will try out again.
Setting NETCF v2 into your customization folder, is not a problem.
I believed NETCF v2 can be extracted out to make as viewimgs , convert to module instead of files.
but because i dont know how to do it, lol
any advice?
Link Broken
keithhiap said:
Hi all,
I took out this thread from
WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB for Himalaya
and cooked a ROM with minimum applications.
Operator has set to O2.
Applications Not included.
Smart Dialing
Scenario
Call Filter
ZoomSMS
and more, comparing to WM2005 AKU3.2 page pool size-24MB RAMDisk-40MB
I find buggy with Eten Dialer running on Smart Dialing.
Included.
Calculator
Camera Fix (patch)
Eten Dialer (skin, u got to install from below link)
http://www.howardforums.com/showthread.php?t=886355]here
My ROM link is here
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
please note.
In order to use Tweak2k2, please install NETCFv2.wm.armv4i.cab (about 5 MB)
If you are installing Resco Explorer & Regedit.
Please seperate the installation.
Resco Explorer can be installed into RamDisk
Regedit has to be installed into Device
Any applications that requires Core OS, have to be installed in Device.
Example:
Pocket Informant
MCM (Microsoft Voice Command)
SPB Weather
SPB Plus
If you are using Pocket Mechanic, bared in mind, do not remove registry that you are unsure, as the application will just scan though your registry and display all unwanted registry.
Once deleted, your Camera - Video wont be working anymore.
/Cheers.
Disclaimer: use at your own Risk. I dont take responsibility if your device crash.
Click to expand...
Click to collapse
Hi,Link for your ROM file is broken it says "Forbidden
You don't have permission to access /file/32772/WM5-3-00a-64-LOC.rar.html.
Ah, that why i hate using free hosting. lol
Actually, i can download.
The procedure is. you click the link below.
http://www.sharebigfile.com/file/327...4-LOC.rar.html
1. scroll down the page to centre.
2. enter the number display
3. click submit.
5. the page will reload, and you have to wait for about 1min (lesser then)
6. the page will reload again, and u will see the download button (in green button)
/cheers.
keithhiap said:
Ah, that why i hate using free hosting. lol
Actually, i can download.
The procedure is. you click the link below.
http://www.sharebigfile.com/file/327...4-LOC.rar.html
1. scroll down the page to centre.
2. enter the number display
3. click submit.
5. the page will reload, and you have to wait for about 1min (lesser then)
6. the page will reload again, and u will see the download button (in green button)
/cheers.
Click to expand...
Click to collapse
Your link is really broken. see the screenshot attached...
keithhiap said:
Hi Master,
Seriously speaking, i still a noob here.
Since u told me about the PPT (Mobile Powerpoint) was not install from ur ROM, so i did not, but just use back your ClearView.
What i did was meddling your OEM folder.
Is good to have those Mobile PPT back instead of ClearView, and pre-install NETCF v2 or v1, i really sorry that i have no idea how to do it.
because i read BuzzDeV's forum.
Try to do those rgucomp to get the registry out, and default.hv/user.hv
still dont understand how everythings works.
I did installed Registry Workshop or Hex Editor, even i manage to open the Registry, i see things that i dont wish to see there, but again, if i remove, i dont even know where those registry links to which files.
haha, basically, i am just a noob who only know how to meddle the OEM folder. haha.
I did try to use Tof_clock ROM, but because his already packed everything together, likewise, your 3.00 is seperated into different folders, just need to remove or add links to OEM folder.
Hope i did not disappoint u for not able to fulfill your suggestion.
BuzzDev Forum has the Rom Kitchen thread, too many useful tips, but i just cant get to understand their explanation. lol
I will try out again.
Click to expand...
Click to collapse
1. Download the folder from here--> ftp://xda:[email protected]/Uploads/Himalaya/C_Shekhar_HIMA_AKU3.2_R40_P24/MS_office.rar
2. Unrar the folder and the folder inside be placed in the /dev/OS by replacing the existing one.
3. Remove the clearvue folder from the /dev/OEM.
4. cook the ROM.
You shall have MS PPT instead of clearvue. Yes the clearvue PDF reader shall also get lost in the process. I have UPXed the PPT, Word as well as Excel in this which is fully functional and tested. Try it if you can....
Sigh, my mistake. lol
the actual link is this, which is from the very top thread.
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
And thanks Master, i shall try to dump the PPT in this few days.
Thanks again
keithhiap said:
Sigh, my mistake. lol
the actual link is this, which is from the very top thread.
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
And thanks Master, i shall try to dump the PPT in this few days.
Thanks again
Click to expand...
Click to collapse
Still the link is forbidden...
http://www.sharebigfile.com/file/32772/WM5-3-00a-64-LOC.rar.html
Humm... that is funny, cause i can access.
Anyway, i have plug in the PPT module, and is working now.
Also , due to the trouble to install individual, i dump in Netcf v2 into the customization folder.
Total Storage is 30.53, and In use 9.32
Later i find another host to host the file.
will try to help
using your ROM,
damn stable. thanks for not branding stuff on the splash screen.
liked it a lot
i will try to upload it to rapidshare for the benfit of others who really need to use this clean ROM
thanks dude. i hope you get to integrate NetCF 2
although just installing it over isnt that hard.
Download IT
heres a RS file download link for people who dont understand sharebig file download system
http://rapidshare.com/files/6563901/WM5_3_1_.00a_64_LOC.rar.html
Thanks for trying my self cooked ROM.
Everything has to thanks Master for providing the ROM, for me to cook.
I believed the Stabability between 3.00 and Master's ROM is the same, as is both using AUK 3.2. Just versioning different.
For my 2nd Self cook ROM, i have follow Master's suggestion
and have insert in Mobile PPT and remove Clearvue.
I have no way to intergrate NetCF v2, cause is a cab file, and there is no way i can see the DLL files. Unless Master able to create the DLL for me to play with it.
What i did for this 2nd self cook ROM is to put the NetCF V2 cab in it, which takes up Storage space.
Guess nobody would wants this way.
Well. i put it is to convenient me not to install again. lol.
And thanks for helping me to find another free file hosting.
Rapidshare, if i am not wrong, high chance will end up cannot download the file.
/Cheers.
NETCFv2.0sp1 OEM
@Hi Keithhiap
Here is the OEM for NETCF v2 SP1 .--> ftp://xda:[email protected]_HIMA_AKU3.2_R40_P24/NETCF2.SP1.Full.rar
Kindly unrar it and place it inside the OEM folder. You have ample space in your ROM. It sould fit into it. All the best...
Cool, Thanks alot Master.
Will dump in and create a new ROM soon.
Really thanks for your help.
Can we have the ROM Kitchen for Aku 3.3?
double_ofour said:
Can we have the ROM Kitchen for Aku 3.3?
Click to expand...
Click to collapse
We can try that. But so far I am unable to know what are thw features of AKU 3.3 over and above 3.2?? Could not lacate that any where...
Hi Master,
The NetCF does not work.
I install Tweak2k2, got the certificate error.
The NetCF 2 for my version is this label NETCFv2.wm.armv4i.cab
If i dont recall wrongly, i downloaded for one of the game.
Binary Casino.
Weird. hehe
Custom ROM for Tornado - Vista ROM for C600,V14
Pictures & details http://www.cnsmartphone.com/29170/viewspace-2335.html
download link: ftp://ftp.pkzn.com/Smartphone/Vista_ROM_(OS.nbf)_for_C600_V14.rar
This rom is in chinese, to change in english Start-Settings(see icon)-press 0(More), press 2(Regional Settings) - press joystick, choose UK English, restart
Applications deleted:
- all games
- java
Some application are in chinese and cannot be changed in english (CeleTask,SimMan,WM5torage)
I wonder how can i edit/create a .nbf rom (from standard rom) like this one. Anyone can help me?
BTW works fine on my C600
Hi, could you please tell me how to install this rom? i am a newbie with the cingular 2125... thanks in advanced
well is simple
Download Vista Rom, unzip it, connect your mobile to your pc (via ActiveSync), you will find in unziped Vista Rom folder a file named ROMUpdateUtility, open it and follow the steps.Is very simple
But first is recomanded to backup your device, see "The Doctor" post(s) here: http://www.modaco.com/index.php?showtopic=245662
good luck
I'm using this ROM. The joystick is better with this ROM as it was not with some others. Font is also pretty for displaying Chinese character.
No wifi
I liked this Rom until I discovered that there is no wifi control! Is it just me or is this really missing? Back to the I-Mate rom for my SP5.
What is the camera like on this rom?
Is it the same as the iphone rom?
@Lemark yes indeed joystick is better, joystick driver is the one form Orange UK AKU 2.0 i think.
bogy16 - Any chance you could upload this rom to one of the upload sites like yousendit or megaupload please?
I've tried to download it from the link and using an ftp client but I can only get about 2mb before it kicks me off!
OK,after lots of hassle and terminally slow download speeds,I've finally grabbed it.
If anybody else wants this rom
http://www2.flyupload.com/dl.php?fid=6547704
It is a pity...
GreatRom, but there is no wifi . Joystick is better but craze,ikone is beeeeeeeeeeeeeeest .Its too bad ,but must comeback to oder official ROM.
Verily,verily pity...
i don`t need wi-fi, my device does not have the hardware piece so...
Try this to show the WIFI on the Comm Manager...
Use a Registry Editor
HKLM - Software - HTC - CommManager
If there are 6 keys present..
Add a key named 7
Under the 7 key
Create a string named - Default
Value Data is - WLAN
Go to HKLM - Software - HTC - SupportedFunctions - just add 1 to current Value Data..if it's 6 then make it 7.
Wait for half a minute then reboot
You guys have to put NetCompactFrameWork into Storage Card/Program Files/NETcompactFramework/. It is provided by the Cooker in the original ROM as a separate bundle.
Oh sorry I don't know if the guy provided NTFC bundle in the package.
Is french is aviable on this rom ?
no language french is not available, only english and chinese. meabe you can put it yourself, i don`t know
TaskManager Missing
Nice ROM. It would have been nice if it came with java though.
I installed the T9 language pack from the iPhone thread. Makes typing much easier
u can download it here
http://download.mobilnaut.cz/?id=73&akce=down
I have the Cingular 2125.
Is it possible to copy the taskmanager app from the faraday rom to this rom, 'cause I cant find the task manager.
After you load a few apps things start running very slow. Have to soft reset to clear the memory.
While the WM6.0 and WM6.1 edited ROMs with the newest NETCF v3.5 come
out one by one, most of them have a problem of incompatible NETCF and SQL with some softwares.
< For example >
Software 1. " Six Law" -------> e-book database of law, sqlce30.ppc.wce5.cab is needed for it (also installed manually)
Software 2. " All-In-Me" ------> business software, sqlce.wce4.armv4.cab and sql.wce4.armv4.cab are needed for it (also installed manually)
After the two softwares mentioned above installed and run,
I keep getting the error message listed below:
System.IO.FileLoadException : Could not load file or assembly
'System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral,
PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes'
or one of its dependencies.
The located assembly's manifest definition does not match the assembly reference.
(Exception from HRESULT: 0x80131040)
After the discussion in this thread (especially thanks to juju-35), we get a
solution to fix that problem. List as below:
For people who need the solution to fix the incompatible NETCF and SQL,
Just collect the files mentioned here and install according to the instructions.
1. NETCFv2.wm.armv4i.cab-----> I don't know why I couldn't upload this file
But you can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0 /WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it. It provides the assembly
of 'System.Data.SqlServerCe, Version=3.0.3600.0.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
If anyone occurs any other special situation, please post it here for discussion.
Craig Shih
Is there any way to have downward compatible?
Maybe the sqlserverce is in the rom files so we can't made any modification to them.
i dont see my rom listed
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
austinsnyc said:
i dont see my rom listed
Click to expand...
Click to collapse
Sorry, I had spend too much time to reflash my TyTN II so that there might be some other ROMs not yet tried.
I 'll give it a try when I get some free time.
Thanks.
L26 WM 6.1 Professional WWE V5
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Thank you my friend,
I was reading your thread before and saw which ROM's are compatible,
it was easy to take out the Sqlce from one of these
Cheers,
Leo
craig_shih said:
Laurentius26 has released a new WM6.1 ROM~ L26 WM 6.1 Professional WWE V5.
It's fully compatible with Sqlce. I' ve tried this ROM and I like it very much.
Click to expand...
Click to collapse
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
_Alex_ said:
Not sure if you've realized the pattern, but the incompatible ROMs are the ones which have upgraded to NetCF 3.5 and SQLCE 3.5.
The ones that are not incompatible have NETCF 2.0 and SQLCE 3.0 just like the shipped ROM.
Hope this helps!
Click to expand...
Click to collapse
Laurentius26 said:
Your not completely right here!
I do have NetCF 3.5 running and my V5 ROM is compatible!
It was the first thing that I was thinking as well btw.
Thanks for letting me know
Click to expand...
Click to collapse
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
_Alex_ said:
Was informing the original Op. It seems like you're the only person who tried to make any changes as everyone else has pretty much stayed clear of this thread.
Craig, I'm surprised you even listed my beta2 UltraClean ROM since it doesn't even have NetCF 3.5 SQL CE installed, hence UltraClean. You could always install Sql CE 3.0 and it won't be a problem. That's why I offer so many variants.
Hope this helps!
Click to expand...
Click to collapse
Hi, Alex, your rom is also very nice. The only one issue I occurred is that
after installing the E-book database of law I got an error message
as follows,
The file 'SLink' cannot be opened. Either it is not signed with a trusted certificate,
or one of its components cannot be found. If the problem persists, try
reinstalling or restoring this file.
I have installed sqlce30.ppc.wce5.cab and NETCFv35.wm.armv4i.cab manually,
but still got the error message.
Sorry that I didn't describe this in the first post.
Passion! said:
I've had the same problem with many of the new wm6 and wm6.1 rooms
the program i use is pocket e-sword which requires SQLCE 2.0 or sqlce.wce4.armv4.cab
the 2 wm 6.1 roms i've tried that works is sleuth's (which i'm currently on) and austinsync's hybrid.
i've tried laurentius, udk, dutty's wm6.1 all can't..
Click to expand...
Click to collapse
Hello,
If your problem(s) come form the .NET CF 2.0 vs 3.5, which I think was mentioned to be the problem for esword in particular, there was actually a workaround posted in Quentin's ROM thread. I ran into the same problems with some of my cabs, I did the changes suggested in the thread, and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsoft website.(Install file called NETCFSetup35.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it (prog can be found in Program Files/.NET directory on your PC)
THe NEcfg.exe is a nifty utility that allows you to detect all .NET CF versions installed on your PPC, and apply a default version to all programs but setup a few programs to run on a different .NET CF (like 2.0).
This way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the default on those ROMs is 3.5).
Hope this helps.
Juju
juju-35 said:
Hello,
there was actually a workaround poste on this in Quentin's ROM thread. I did it and it worked for me.
Basically, these were the steps:
1- Flash any ROM that has .NET CF 3.5 (most ROMs these days)
2- Install .NET on your PC (needed for step 3, I found out!). Can be dowloaded form Microsfto website.( Install file called NETCFSetuov45.msi)
3- Install .NET power toys from MS. (File called NETCF-v35PowerToys.msi)
4- Install .NET v.20 on your PPC (cabs can be found on this forum)
5- Copy Netcfg.exe and its dll (ARM version) to your PPC and run it
THe NEcfg.exe is a nifty utilisy that allows you to detect all .NET CF versions installed and apply a default version to all porograms but setup a few programs to run on a different .NET CF (like 2.0).
THis way you can have programs that would run on any versions of .NET CF installed while having msot of your programs running on the faster,, newer version.
I researched this to get Zagat 2 GO ( a great restaurant guide!) to run. Runs beautifully for me on Schap's, Dutty and 5.2 Alex ROMs (the program needs CF 2.0 to run and the feault on thsoie ROMs is 3.5).
Hope this helps.
Juju
Click to expand...
Click to collapse
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
craig_shih said:
Thanks a lot for your excellent research. I'll try it recently. It really helps a lot.
Click to expand...
Click to collapse
Need a lot of help myself (!), so I am glad to help others if/when I can. It is the whole point of a community
Make the NetCF Fix more easier
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation：
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
craig_shih said:
Yeah, I 've tested that method. It really works. All softwares can be run on
every new Roms. (Many thanks to juju-35)
For people who need this solution for some softwares, I provide a easier way
for them. I upload the files taken out from the original installation：
1. NETCFv2.wm.armv4i.cab-----> I don't know why I cannot upload this file
You can get this file (about 2.13MB) from forum or download the
NETCFSetupv2.msi (about 37.1MB) from Microsoft website.
After installing NETCFSetupv2.msi on PC, you can get the cab
"NETCFv2.wm.armv4i.cab" from :
C:/Program Files/Microsoft.NET/SDK/CompactFramework/V2.0/WindowsCE/WCE500/armv4i
Copy this file to Kaiser and install it.
2. sqlce30.ppc.wce5.cab -------> I have uploaded this file
Copy this file to Kaiser and install it.
3. NetCFConfig.zip -------> I have uuploaded this file
Unzip this file and you get a folder. Copy the folder to Kaiser's main
memory. The folder has NetCFCfg.exe and two .dll files(ARM version) in it.
Then run " NetCFCfg.exe " and you can see the configure screen as below:
Four menus:
About ----> Show the .Net Compact Framework versions installed
You should see 2.0.6129.0 and 3.5.7283.0
GAC-------> Show all the Assemblies installed in the Global Assembly Cache
Device Policy----> In this menu, you can set the default NetCF to v3.5.7283
and click Apply button.
Application Policy----> Here you can override device policy for applications.
That is you can choose which software to run with
NetCF v2.0.6129. Then click apply button.
After that, enjoy!!!
Craig Shih
Click to expand...
Click to collapse
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
_Alex_ said:
Hi Craig,
I'd like to add this as a link in the wiki. Can you edit the topic to be more appropriate now that you've found the fix? It'd also be very helpful if you were to summarize all your findings and your solution in the first post.
Thanks much!
Click to expand...
Click to collapse
Thank you. I'll edit the topic and contents as soon as possible.
Craig Shih
For the fix to be activated, the NetCF Config folder should be copied
to main memory. For me, if I put the NetCF Config folder in micro SD card,
the fix doesn't work. So I copy the folder to Program Files folder in main memory.
won't install for me...
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
vestaviajag said:
this is a great work around it seems, i still have one issue. When installing NET CF v2.0, it won't install. It gets to the very end then says "Installation error. Stop all applications and processes, maximize available storage space, and run installation again. Support info: 3." .. followed by the .cab installation saying "Installation of NETCFv2.wm.armv4i.cab was unsuccessful"
What is the issue here? how do I fix this???
I'm running ROM 3.49.NO2.5066 (19588 WM 6.1) on Radio: 3.37.20 on an Alltel Titan
Click to expand...
Click to collapse
i have this problem when trying to install .net 3.5
any help on this error?