Greek ROM for the prophet - JAMin, XDA Neo, S200 Software Upgrading

Please use this thread
http://forum.xda-developers.com/showthread.php?t=283676

Thx mate.
What this package include exactly!
Pes mas liga pragmata gia na kseroume ti na perimenoume na doume.
Se eyxaristo opos kai na exei.

This is Ace Hellas's greek rom. Two files are patched to bypass IMEI check.
This version has a problem with smartdialing.
I might upload a newer one later.
The package includes just a .nba file (to be used with awizard).

Thx andrew.
I will try it and I'll give a feedback.

chrismc said:
Thx andrew.
I will try it and I'll give a feedback.
Click to expand...
Click to collapse
Actualy don't try this version.
There is a problem with smartdialing (one .dll got ****ed up)
Otherwise it works.
I'll have to upload a new version which doesn't have this problem.
I didn't do this earlier because I thought no one was interested

Ok. thx for warning me.
I'll wait for your next ROM upload.

Hellenic ROM for HTC Prophet (Qtek S200) by andrew_sh
Instructions:
1) Update the phone using ROMUpdateUtility.exe
2) After installing Ext. Rom, you will see a Security Prompt. Select allow.
3) Wait for a few seconds, the device will reset automatically
NOTE: If you do not get the security prompt, do the following:
a) Press and hold the D-PAD button
b) Press and hold the battery Icon
c) Release both
d) Tap "Εκτελεση" (Ektelesi - Run)
e) type "langbootcheck" and tap Ok
f) Select Allow
g) Wait for a few seconds, the device will reset automatically
The nk.nbf contains no bootloader (only OS and Ext. Rom), so this minimizes the
risk of something going ROM.
NOTE2: As everything else, USE AT YOUR OWN RISK - FOR EDUCATIONAL PURPOSES ONLY
NOTE3: This ROM is copyright by ACE HELLAS - Use only for EDUCATIONAL PURPOSES unless
you own a device purchased from them.
Credits:
Marker - for inspiring me
maimach - for the wm5editing tools
itsme
and to all people who helped create nice tools like awizard
Download Link
http://rapidshare.de/files/24201146/RUU_Prophet_ELL_by_andrew_sh.rar.html

[email protected], no response after update.
I get this screen of red, green, blue colour.
IPL 1.00
SPL 2.15
Any ideas how to recover?

OK, panic is over. :shock:
I installed the previous ROM (RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID).
I took off the battery, put USB and run ROM Update Utility. :lol:

The phone will probably need to be cid unlocked first. I can't tell because mine was cid unlocked anyway

What is cid unlocking? and where can I find info about it?
(Just send me links in order not to get out of subject)
Thx

andrew_sh thank you very much!!!
at last i have a complete greek rom in my qtek s200 even though my spl was different than yours
Guys don't be afraid ....... try it!
I have even greek t9 in phonepad !!!

jimbou, give us instructions if you can in order to take sdvantage of andrew's posted ROM.
Thx in advance

Use the instructions of andrew_sh to do it
If your SPL is 0001 you will have no problem, but if it is 0000 you won't be able to do it
Then you will have to do what i did:
you need these two tools:
TyphoonNbfTool_04.exe and
aWizard-v1_2 (avoid using version 1.3, it didn't work for me)
1.with thyphoonnbftool you decrypt from nk.nbf found in greek rom, a new file named OS.n_d and rename it to OS.nba
2.use awizard and in options menu first do rapi unlock, then cid unlock and finaly press w to flash the new rom.
3.wait about 20-25 minutes
4.hard reset and you have a greek rom in your prophet
5.In my case there was a little bug, but thanks to andrew_sh 's instructions i managed to overcome it. There was no start menu, no settings, nothing.If you experience that, then keep middle key of the d-pad pressed and also keep pressed with the stylus the battery icon on the top right corner of the screen.A menu will appear and you will press ektelesi.
Then write langbootcheck and press ok
It is done!
you have a greek qtek s200!

Thx. I'll try it

What version is the greek rom? Is it the latest 2.09 ?
Thank you.

Yes, i think it is 2.09

no, it is not 2.09.
it is the one before 2.08.
If I see many people interested, I could do something about the 2.09

hi guys, I hope this is not irrelevant.
Is there a way to be able to switch to greek whenever I want to write an sms or update a contact with out replacing my rom (NL rom works fine so far).
In other words to be able to use more than 1 language for messaging, notes etc..
Thanks! Efxaristw!!

greek sms
file egw evala to resco keyboard kai tin wra tis eggatastasis epilexa greek tin primary kai einai teleia. mporw na grafw ellinika kai na vazw kai tonous!!!

Related

MDA Compact upgrade in one package

Hello, i have done lot of reading there about all upgrades on our Magician's.. So for everyone who is new here to this forum, there is latest update available with easy few steps to upgrade
ROM version 1.12.00 WWE
Radio version 1.13.00
Protocol version 1337.43
ExtROM version 1.12.131 WWE
It's an IMATE ROM, with CZ (Czech) customized ExtROM. so anyone who want to cook his own ROM, just
download this file > http://live61.com/mda/yourownEXT.nb1 and follow Extended ROM steps above
It's complete Dump of my device, including CE ROM, EXT ROM and RADIO STACK. This update flawlessly worked on 3 devices i had in my hands.. So I hope, it will help you with no problems. (no need to change any 440bytes and other 'hacks' found there in forum).
Install is so easy
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
2. write it on your SD card (at least 128mb) with NTRW application - "ntrw.exe write Imate_WWE_1.12_1.13_1.12.131.nb1 g:" (g: as your SD card drive letter)
3. insert SD card to MDA, and enter bootloader with CAMERA+POWER buttons together with RESET
4. after about 8 seconds you will get message with "Sections=2, press Power.." so press Power button and wait until "Checksum OK" message appears. Then reset your MDA
Thats it!
Customized Extended ROM
1. install this plugin to your Total Commander. (restart of PC needed!) http://live61.com/mda/VirtualDisk_1.30b2.rar
2. mount as an virtual image yourownEXT.nb1 file
3. make here your desired changes and unmount it
4. run WinHEX, open modified yourownEXT.nb1 (ouch.. i know, you need this.. http://sweb.cz/ftp1/WinHexSerial.txt)
5. select whole file with CTRL+A and copy to clipboard CTRL+C
6. open Imate_WWE_1.12_1.13_1.12.131.nb1 file, go to OFFSET 2C0019C and write clipboard data with CTRL+B
7. save Imate_WWE_1.12_1.13_1.12.131.nb1 and follow Install steps
If anything goes wrong, please let me know. Good luck. John
im going to try it....
(idem to tam šupnúť...)
i believe i will be able to do it, becouse i was not able to do before with dumped rom on ftp...
Hi
I made a SD card as You wrote.
When I make a HR, I have clear dark screen with "Serial" on the top and "v 1.00" on the booteom of the screen.
What is wrong?
Thanks for help.
howto
@all,
please aid a novice:
-How do I mount "your own extrom" in total commander???
-What and how can I make changes then????
Thanks in advance
kavalir said:
1. download NB1 file http://dc.live61.com/mda/Imate_WWE_1.12_1.13_1.12.131.nb1
Click to expand...
Click to collapse
Recently got a M500 and trying your rom but the link posted my be dead. Can you upload it again. Thanks.
how to upgrade only Radio 1.13 ? i downloaded from ftp
MagicianRadio_1.13.00_maupgrade
currently, i using Qtek1.12ROM for o2mini..
Can i just run the setup file ? then do upgrade only radio part.
Is there a newest rom than mine ?
hi,
i just bought a mda compact with t mobile few day ago,
it look like this
ROM Version = 1.12.00 WWE
ROM Date 05/28/05
Radio version 1.12.00
Protocol version 1337.42
ExtRom 1.12.152 WWE
is anything that can be upgraded ?
and how can i get the 02 active GUI on it ?
or remove the Tmobile one ?
I did try to find the answers elswere but seam to be a tiny bit complex to find out. (probably my english
i used to be able to surf the internet over GPRS for free with the o2 payand go sim card, i still do with the 02 montly thought.
any one know more about it ?

ERROR 011: EXECUTE REMOTE COMUNICATION PROGRAM ERROR

When I try to upgrade my i-mate JAM to a new special ROM from Kichen after a step this masage apears "Cannot execute the remote comunication program. Plese make sure that the USB/Serial cable is properly connected.
so guys plz help me urgent
Does the same error come up when you flash with a shipped-rom which hasn't been changed?
Does your device respond to any commands from the update program? If so, what happens on your device?
And what did you change in the rom?
As you probably guessed: I don't know an answer to this & i'm trying to figure out what is different in your setup compared to a regular update.
Regards, M
Thanx 2 reply
No dear every thing is OK When I try to update with shiped ROM it works 100% no problem. When I click in my computer the device is located and opens software installs nothing abnormal every thing is as usual, But when I try to update it with special ROM (got from Kichen that I like very much) the folowing masage appears
I guess that romkitchen isn't compatible with magician :-(. You can try to put in the GetDeviceDara.exe from a shipped-rom in the appropriate romkitchen folder, maybe it helps. Cause I love to see this working.
Good luck, M
Let me do it
The rom I got is for windows 2003 SE so I think it should work, now let me act your advise then i'll inform you.
regards
The same problem i have
I try to update one of my friends i-mate JAM in a dfrent PC but the same problem I got. I think the rom is not compatible with JAM. Do you know another ROM to work on my JAM like available in Kitchen???
Well I haven't experimented with RomKitchen & don't know what you want to achieve with it. Ext-roms can be edited with bal666's tool too & there are loads of different (not edited) ext-roms @ the ftp.
& of course there's the BIG Storage hack, with which you trade in the ext-rom for an enlarged internal Storage folder.
Haven't seen anyone yet who really edited the CE image :-(
M
Yes I tried but...
I tried big ROM but in 3rd stage the folowing masage appears "card incilize error" When it tries to back up ROM on SD card. I have MMC not SD Now may be this is cause or somthing other. Have you updated your device with big storage rom & is it OK???
If so I'll try again
I downloaded the ROM form this site http://www.romkitchen.de I updated one of my friends PPC from this site's Rom its performance is 50% increased. but mine (JAM) is not going to update
I did it with a patched shipped-rom :!: Follow this link & I think you should be able to manage http://wiki.xda-developers.com/index.php?pagename=MagicianRomUpgrade
RomKitchen is also on this forum, but I think it's for other devices. You can find it in the wiki.
Cheers, M
Ok let me do it
Thanks dear let me download and check it. One thing that my JAM is from i-mate & there is T-mobie ROM, but its for Magician so should I do it no problem? Will I be able to reload its shiped ROM that I have already. sorry for my broken english
Yes it's no problem to use another magician rom, use maupgradeut_noid.exe to bypass country id error. To flash your current shipped-rom back just follow the same procedure.
Be carefull to backup your current ext-rom cabs though, they do contain some operator specific settings for eg gprs, voicemail etc. You need to install some of them instead of the TMO ones present in the TMO 1.13WWE rom. You can use WinCE cabmanager (available on trial) to have a look inside the cabs & decide wich ones to use.
This is my list of the Dutch TMO 1.13WWE ext-rom cabs anyway:
BlueTooth patch:
BTHUSB_PATCH_AKU26.CAB
MMS:
CAB-Acrosoft-MMS-2.5.0.28-ENU-MagicianAKU2.6-13May06.CAB
Needed in combi with MMS (does contain Dutch T-Mobile specific settings though)
CAB-Customization-Magician-TMONL-03Jun05.CAB
Certificates:
CAB-Certificate-TMO-16Sep05.CAB
Email wizard:
CAB-EmailWiz-2.0.0.6-PPC-TMNL-ENU-09Aug05.CAB
Java support (midlet manager):
CAB-TaoJava-10.1.2.76-PPC-ENU-17Aug05.CAB
Caller ID:
Caller_ID_Magician_T-Mobile_WWE_RC22.CAB
Camera & album:
Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
To hide the ext-rom:
Delete_vdisk_shortcut_WWE.sa.CAB
IntelliDialer (with T-Mobile colors, other skins avalaible on the forum):
IntelliDialer_Magician_T-Mobile_WWE_RC20.CAB
IntelliPad (T9 for Slovak, Polish, Hungarian, German, English, Dutch, Czech):
IntelliPad_Magician_T-Mobile_WWE_RC20.CAB
Remove current PIE favorites:
Remove_Favorites_MA_TMONL_112187.CAB
New battery.dll & wavedr:
THB_MDA_COMPACT.CAB
T-Mobile sim toolkit, theme, sounds, carrierlogo etc.:
TMNL_Customize_113125.sa.CAB
SIM manager:
TMNL_OperatorName_MA112178.sa.CAB
UserAgent settings:
UA_Profile_TMO_Compact1.1.sa.CAB
Start menu customization, Today plugin settings & T-zones:
UXC_Magician_T-Mobile_WWE_NL_RC25.CAB
Set the version to 1.13WWE
Version_WWE.CAB
Zip support:
Zip_Magician_T-Mobile_WWE_RC20.CAB
Success, M
thanx
Ok thanks a lot
regards

Always bootloader screen

Hi, I've a vodefone v1240 (HTC Tornado), i've tried to flash wm6 flash to it... but... i haven't super cid unlock... the flash is ok but phone always star in muticolor screen (botloader screen), i've tried to flash a lot of flashes but always get invalid vendor id or "only upgrade"... i've tried too with TyphoonNbfTool to edit nbf and change vendor id.. but always get the same mensaje ("invalid vendor id" or "only upgrade")...
How can i recover my phone? :S
Thanks
Sendoa
Determine your original CID first, to do this type:
Code:
info 2
into mtty or teratermpro and paste the output in the thread
Phil
Ahh, there you are ! Are you or duke_Stix still planning to cook some newer ROMs or remove bugs from the existing one ? We hardly see you guys around there days
i get this... what is the original CID? ¿?
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3CE40000 Bytes
HTCSVODA0504 㱍dHTCE
Cmd>
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Changelog:
HTC Task Manager inc
HTC File Manager inc
Application Unlocked
Fixed WiFi
HTC Comm Manager inc
Removed Wireless Manager
Removed Debug Apps
Removed Marketplace
Removed Office
Removed Voice Command,
Removed Windows Update,
Added Bluetooth DUN support for TomTom compatibility
Added Bluetooth FTP protocol
Extra's (as a separate download)
Office
MMS (semi working)
HTC Clear Storage
Jeodek Java
Button fixes
xT9 (for those who prefer it over standard T9)
xT9 lang packs (split into separate languages)
TCPMP
wm5torage
VoIp
Localisations:
Polish
Czech
Russian
However at the moment I'm having issues with initflashfiles.dat, once these are sorted, it will probably be released the same day.
Back to the topic:
Ok, using typhoonnbftool v0.41 open up a tornado nbf (wm6 or official, it doesnt matter) and then edit the header data so that the Operator field reads:
Code:
VODA0504
That is your original CID
Then save the nbf and flash it to your device
Phil
done but...
Hi, i've done but... always get a "only upgrade"... only let me to reflash wm6 flash.. but it always return to bootloader screen :S what am i doing wrong? :S
Thanks anyway
Sendoa
Try adjusting the version numbers to something ridiculous like 99.99.99.99 as well
Phil
jm012a9749 said:
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Phil
Click to expand...
Click to collapse
Hey Phil, Thanks very much for the update ! Your hard work is much appreciated here !!
Me too
I'm having the same problem as Sendoa. I flashed the WM6 ROM to my 8310but after 100% completion, the phone re-started in bootloader mode.
I can flash it again with the WM6 but the same thing happens each time (bootloader mode). I've tried to flash with several other ROMs but each time I get the "Invalid Vendor ID" error before flashing begins.
I've tried the Typhoonnbftool tool to change the header as suggested earlier in this thread but without any success. My CID is 'DNG_0501'. I'm still stuck in bootloader mode.
I'd appreciate any assistance.
Thanks,
Straker.
Sorted
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Solved
Thanks to all
I flash it with a cingular flash with version changed to 79.79.79.79 and operator changed to VODA0504, and work again.. then i've unlock the cid and flash wm6 flash and it is working with it
Thanks again
Wow, that's cool, means I can flash my phone to WM6 without voiding my warranty ( I still got 5 months left )
lomanasq said:
Here, here they are:
cancer awareness ribbon
Click to expand...
Click to collapse
ban this MOTHA F**&&
Straker said:
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Click to expand...
Click to collapse
where did you get your flash from?
typhoonnbftool is creating only 1kb file of nk.nbf
Hi,
I have the new typhoonnbftool got it from sourceforge when i try to edit headers of a Imate rom to make it for xpa swisscom v1240 with the CID "VODA0505" i get only 1kb nbf file i try lots of thinks but no luck at all.
kind regards
Fakbrenjeri
Similar problem
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Small nbf
Straker,
Where did you get the rom that worked?
timwb said:
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Click to expand...
Click to collapse
use typhoon tools 0.4.1...
ftp://ftp.xda-developers.com/Uploads/Smartphone/Tornado/Shipped_Complete_Updates/I-mate
use the rom from here..
Stuck on BootLoader
I there!
I've tried everything that I could find here and still no luck...:-\
I've an SPV C600 and when I upload the Imate ROM it stays stuck on the BootLoader.
It only works if I upload the Orange Upgrade ROM...
I can't SuperCID it, since no app as worked till now...
What can I do?
Thank you!
try this:
http://forum.xda-developers.com/showthread.php?t=285344

How to get a Kaiser to display Chinese ?

Hi everyone, I just got my first smartphone, an AT&T Tilt (HTC 8925) a couple of days ago. I'm happy with it except that I wish it to display Chinese when browsing webpages. I don't need the interface to be Chinese, nor do I need to input Chinese. I just wish when I visit a Chinese website, I'm not seeing blocks.
Don't know if this makes a difference, but either traditional or simplified Chinese would work (I read both).
Searching the whole forum didn't give me much. Probably people had some discussions before, just I didn't find them yet.
I'm totally new on smartphones. Any help is very much appreciated.
info on the phone:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I just flashed the SPL to Kaiser-HardSPL-3.56 following instructions. BTW, which version should I use, 3.56 or 3.29/28?
I did not flash the ROM, b/c I'd like to find out more on Chinese language support.
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Be sure to backup your device before you try. I am not responsible for any data lost. Your might need a hard reset if it failed... But it is the cab that I have been using for English roms for many devices and it will likely work for you too
you shoud find a chinese font file'ttf',and repair reg
try this websit
www.ioicn.com.cn
well.. this is what i use only...
http://www.studiokuma.com/wm/?section=support
1. CE Star chinese
2. Monster chinese
3. Many font + wince.nls + registry mentioned above.
4. My rom (see signature below)
Thank you very much.
I'm now downloading and trying the ways you pointed out.
Miraco said:
Install this cab and it will perfectly display Chinese. It is suitable for almost any WM5,6,6.1 rom :http://www.51spsoft.com/DownInfoEn/info26059.html
Or direct download link: http://www.51spsoft.com/Download.asp?ID=26760
Click to expand...
Click to collapse
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
ctrc said:
Thank you for the suggestion. I just installed it on my official ATT ROM (WM 6.1). It showed installation successfull. It also said it may not display properly b/c it's designed for a previous version of Windows Mobile.
Anyway, then I visited mitbbs.com and www.sina.com.cn as a test (using Internet Explorer). Both did not show Chinese. I also tried changing encoding to Unicode UTF-8 and it didn't work either. under system settings, I looked at regional settings and didn't find anything Chinese.
Is there any configuration that needs to be done? Do you happen to know what ROM floating in this forum for WM6.1 can indeed incorporate this O2 Chinese support?
Thanks again
Click to expand...
Click to collapse
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
jackleung said:
For regional setting, check the size of your wince.nls make sure it's > 1mb in size (typical English only is only 300 - 400k in size). But if you already planning to change yr rom, I highly recommand your try my rom. It's pre-configure for Tradition Chinese (HK, mostly), but will work on simplified chinese as well.
Click to expand...
Click to collapse
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
This is what I use to read Chinese website
http://forum.xda-developers.com/attachment.php?attachmentid=37342&d=1176792242
This is what I use to type Chinese
http://www.a4user.com/\A4_down_sip.asp
It doesnt support chinese hand writing input though. If you know of an SIP that supports hand writing input please post here
ctrc said:
I'm downloading your ROM, will try. Thanks for all the work!
just curious, where can I find wince.nls? I can't find any search function for the File Explorer on Tilt.
Click to expand...
Click to collapse
It's hidden file under \Windows. Therefore, must use "show all file" in order to display it.
cproaudio, all listed below support Chinese writing
http://www.studiokuma.com/wm/?section=support
CE star
Monster
I tried installing CE-Star 2.8 Chinese support on the shipped ROM and it worked.
I then flashed the ROM to Jack's cooked ROM and it works great now. Thank you, Jack.
Thank everyone. This forum is great.
Instructions to migrate ATT WM6.1 to Jack 2.6 confirmation
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
mmtea said:
Dear All:
I just got the same phone as" CTRC above" but to ensure that I dont make any mistake on updating ROM using Jack's V2.6 from ATT Tilt WM6.1:
ROM version: 3.57.502.2 WWE (since shipped I didn't flash the ROM)
ROM date: 07/17/08
Radio version: 1.65.21.18
Protocol version: 25.88.40.05H
I read all of the above . However, to ensure that I dont run into wall,
Can someone post the step by step instructions including any potential "landmine" on how to migrate from the
ATT ROM above to Jack 2.6 ROM including the instructions if I need to install
those pre-requisites (Soft and Hard SPL ?)and proper Radio ?
Many Thx
Click to expand...
Click to collapse
Wiki is your good friend here: http://wiki.xda-developers.com/index.php?pagename=KaiserIntroductionToROM_Flashing
Hi Jack:
I had already unlock the ATT tilt using unlock code ...Do I still need to run step one below?
1. CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
BTW, I did get the "white screen" on this phone ... and follow the instructions to :
- 1a. download the 5 attached files
1b. pull out the battery, REMOVE SIM and SD CARDS !! and reinsert battery (this step *is* important)
1c. connect your PC to phone with a USB cable
2. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Thx
White Screen Issue
Hi Jack:
JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe ...
Are these JumpSPL1.56 or JumpSPL1.93 run from PC or the terminal device itself ? How do I run these two ".exe" files in the device ?
Why am I getting White Screen and others devices dont get white screen ?
Thx
mmtea said:
The step (2) above , copy the JumpSPL1.56-KAIS.exe to the device ...Pls advise which folder and how to run it after taking the SIM OUT ?
Click to expand...
Click to collapse
Anywhere. I would copy it to the top level (\). Even if you took your sim out, you can close the phone page (which complaints about sim) by tapping the top right corner or the hardware red button (hang up). Then use "File Explorer", locate the exe files that you copied and click on it.
Hi Jack,
I am new to the Tilt. How do I get to "File Explorer" ? I dont see it on the menu when I open either the "setting" or "programs" ?
BTW, when I run the JumpSPL1.56-KAIS.exe, do I also need to run the Kaiser Hard-SPL v1 again ? what's the right sequence ?
Thx
RESET
Hi Jack:
Is the rest pwer+camera+ "navigation" at the same time to get Tri-colour ?
if NOT, which three at the same time can "reset" ?
Thx

O2 XDA Mini S (G4) Not flashing

Well, i've flashed the X50v and HTC Touch Elfin before, however I seem to be having some problems with the Wizard. I'm trying different ROMS and none seem to be working. Once a flash appeared to go through correctly, and the splash screen at startup was changed, but it still booted into WM5.
Now even though it is CID unlocked, it says that the RUU is out of date and won't update the phone.
IPL is 2.21.0001
SPL is 2.21.0001
have you downloaded and flashed with Wizard_Love_2.26.10.2_WWE_Novii_CF2 first if not then do. using the SoftSPL-V0.1 just extract then copy over the nk.nbf file after which do the same for the wm6 rom you wish to use. i advice using the TNT.20273_Professional_Wizard_HTC_Home_FREE rom or the TNT.20273 Professional Wizard rom. either are good roms.
i have the same phone and it worked a treat
Obsidiandesire said:
Well, i've flashed the X50v and HTC Touch Elfin before, however I seem to be having some problems with the Wizard. I'm trying different ROMS and none seem to be working. Once a flash appeared to go through correctly, and the splash screen at startup was changed, but it still booted into WM5.
Now even though it is CID unlocked, it says that the RUU is out of date and won't update the phone.
IPL is 2.21.0001
SPL is 2.21.0001
Click to expand...
Click to collapse
How do you confirm its CID unlocked,as G4 device cannot be CID unlocked and with its present IPL/SPL it isn't even HardSPL ?
A G4 phone can only be upgraded to wm6,either through SoftSPL or HardSPL,you can read about them in the G4 sub forum posted as stickies.
Thanks for the help guys, for some reason the hardSPL wasn't working, but now I have 6.1 on my phone! I have another problem, however which I'm going to create another thread for later today, here it is if anyone see's this:
Since upgrading to Winmo6.1, my keyboard layout has been broken. I have an O2XDA MiniS, so it's a UK phone.
Here's the layout I should get:
QWERTYUIOP
ASDFGHJKL (Del)
(cap)ZXCVBNM(up)(Enter)
(Dot)(Tab)(Windows)(Ok)(Space)(period)(left)(down)(Right)
And with dot-shift (Don't know the actual term)
1234567890
[email protected]#$%&*() (Del)
(cap) - _ € £ + = ; : (enter)
(dot) ~ (Win) " (sym what does this do?) , ' / ?
This is what I Get
QWERTY is exactly the same, its the symbols with Dot-Shift that have changed
123456790
[email protected]#$%&() (del)
(cap) ` -_+ = * ; : (Enter)
(dot) (Tab[Should be ~]) (win) " , ' / ?
I have tried the Et9 cab file which didn't seem to do anything, let alone work.
There was a post I saw which had a link to a rapidshare file which has now expired.
Some people have tried registry settings, that hasn't worked for me.
I've spent the last hour searching, this keyboard means a lot to me.
I bought this phone for my girlfriend but ended up keeping it since I love the keyboard, sometimes do Python scripting on the go, editing word docs + email browsing is easier. So she now has my Touch Elfin (which is newer)
So yeah, i'll pretty much copy + Paste that into a new topic if this doesn't get any replies by say 8PM GMT?
I don't really like making hundreds of new topics for every little problem I Have. Otherwise there'd be one for Opera + Hardware buttons (Plus the internet button on HTC home screen)
one for it not staying in landscape mode when the keyboard is down, and one for my myriad of MiniSD card troubles
sorry forgot about this issue about the keyboard its simple to put it back to uk even if its a pain.
step 1 open regedit
step 2 open HKEY_CURRENT_USER
step 3 open ControlPanel
step 4 open Keybd
step 5 select Locale and change it from 0409 to 0809
and now everything should be in the right place
anything else feel free to ask

Categories

Resources