Boot Screen Looping - Touch Pro, Fuze General

So this is a weird problem I just started having today.
After putting my phone away during practice, I came back to find that it had only 1% battery.
It died en route to my room, and when I first plugged it in to my PC, it turned on and worked normally. After a while it turned off.
Now, when I try to turn it back on, the htc Raphael screen comes up, and it makes a short vibration, then goes to black for about 1 second, and then repeats. It has been doing this nonstop.
However, it only does so when it is plugged in to a power source. When it is not plugged in, it is completely unresponsive.
I have the elite RC2 ROM that I flashed back in November.
Any suggestions?

hard reset to start things off.
Hold down the volume down button, center button and then press the reset button with the stylus until you see a screen that says something like "this operation will delete all your personal data, and reset all settings to manufacturer default. Press VolUp to restore manufacturer default, or press other keys to cancel." then press volume up. Remember you will lose all data, phone numbers and anything else stored on the phone.

i know this problem
I have had several, i solve it taking press the power button long time during the boot.
Of course, the phone must be plugged in to a power source.

Problem solved.
I left it unplugged with the battery out overnight, and then plugged it in to charge, and it did not attempt to startup.
After letting it charge again it worked as normal.
I suppose the battery was so run down for some reason, that even plugged in, it did not get enough power to complete the boot.
It works now. About to flash Elite RC3 and a new radio.

Related

broken fuze. powers on as soon as battery is popped in

So I've had my fuze a little over a year now, no major issues. Used mostly energyroms, but about December time I switched back to a simple non-bloated stock rom for the stability.
Anyway today at work I was texting, and I press the power button to put the phone in standby. And the screen remains on and usable. I tried again and it would not go into standby (power button physically feels normal, it does not feel loose or abnormal.) So i let it sit for a few minutes, then i look at it and a message poped up asking if i wanted to turn the phone off (like as if i was holding the power button)so i press no, then it comes up again a few seconds later and aagain and again. So I soft reset the phone.
The phone resets but takes a LOT longer at the att/htc splashscreen, then it hangs at the htc screen and does not make it to the wimo screen, but instead an error screen saying:
"The device is unable to boot because you have either turned off the device incorrectly or tried to install an applicationa from an untrusted source, press SEND to reset your device or press any other button to cancel..."
I think it went through the hard reset this time because when it restarted it asked to calibrate the screen and install stuff. it resets again sometime after that, still takes forever at the splash screen and comes back up to the error, only this time no matter what button i press it wont go away and boot into wimo. It seems like none of my buttons work (they wont light up now) when i slide out the keyboard, it is not lit up like normally.
And heres the kicker, my only way to turn on/off the phone is to take out/put in the battery. As soon as I pop the battery back in the fuze turns on. Is my phone toast? Ive tried to hard reset and the phone does not reach the bootloader, it goes straight to the splash screen. Same with trying to reflash it from my comp, raphealwrapper cannot find my phone.
I've only recently encountered the exact same problem on my Touch Pro, but stock ROM and everything. As far as I can tell, our power buttons are busted and probably need to be serviced. One of the contacts must be stuck in the 'on' position somewhere inside :\ As a temporary fix, I've been using AEButton Plus and remapped double tap end call key to turn the screen off, and removing the stylus to turn it on.

Phone entirely bricked. Won't turn on, won't charge, nothing.

I was taking a video, and finished it, when suddenly the phone froze up and turned off. I've been using MIUI, and while it's mostly pretty stable, reboots and crashes happen, so I just rolled my eyes. But since then it's been completely dead. I couldn't turn it on, even after taking the battery out several times, can't put it into recovery or download modes, and it's been connected to the charger for about ten minutes now and still nothing.
I haven't flashed anything for ages, haven't done anything odd with the phone at all, I have no idea what could have provoked this. Please help, I can't imagine what I'd do if my phone was permanently dead.
Samsung Galaxy SII with MIUI weekly ROM (currently 2.4.27)
Things I have tried:
Long press power button to turn it on (obviously)
Same thing after taking the battery out for ages
Press Vol up + Home + Power to put it into recovery
Press Vol down + Home + Power to put it into download
Plug it into charge
Plug in data cable connected to computer
Take out battery for a while, then replace, plug data cable into computer (but not phone), hold volume buttons while plugging in phone (internet guy told me to)
Everything above shows absolutely nothing on screen. Charging heats it up a little.

cannot unlock tablet

Update below
my security unlock screen method is "pattern", i went to setting -> security and uncheck "show the pattern" or "visible pattern" (or something like that. i was curious what is that setting about)
then i press the power button to put it into sleep mode, it turned off the screen, then now when i press the power button again to wake it up and nothing happens.
also last time i tried connecting it to pc it automatically woke up, but now i connect to pc nothing happens, on Computer there's nothing like "Asus transformer pad TF300" either. i don't even know is it turned off or not?
i assumed it was turned off so i tried pressed and hold the power button with no luck.
tried 3 times. battery was 67%. it was working ok before i changed the setting.
also yesterday when i got it i couldn't power it on because there was no power in the battery, i had to plugged it to charge and wait 2 hours then i was able to power it on. so is the battery empty right now? it shows 67%, or is this something related to the setting. i also have bad battery life.
now can't do anything, if i want to return it i can't even do a factory reset to erase my personal data.
UPDATE: i read someone's post hay says he usually have to press and hold the power button for 12 seconds for it to boot, so i tried that and it booted up. yes i said it booted up, which means it turned off when i pressed the power button to lock it. and the battery went down to 63% (from 67% i said above).
so what does this mean? why do i have to press and hold for 12 seconds, (normally 1.5 seconds)? and why did it turn off automatically? battery still drain about 1% every 5 minutes.
so far i have too much problems

TF700 Crashed

Not really sure what happened, but I left my tablet alone for about 5 days. Had to plug it in to charge it back up obviously. The next day turned it on, and all I get is it vibrates once, than just vibrates infinitely screen is not turning on I think. I tried the reset button, recovery mode nothing happens just goes straight back to vibrating. It seems I can enter APX mode, since it vibrates once and than stops my computer sees it but cant find device software to install for it, and shows up on devices as "APX" unidentified.
I even popped it open, pulled the power connector for the board and backup battery let it sit for a day; plugged it back in and still same issue as before. I bought it 9 months ago in December only real issue before this, is that it froze a few times but went away on its on after a reset.
aidan1982 said:
Not really sure what happened, but I left my tablet alone for about 5 days. Had to plug it in to charge it back up obviously. The next day turned it on, and all I get is it vibrates once, than just vibrates infinitely screen is not turning on I think. I tried the reset button, recovery mode nothing happens just goes straight back to vibrating. It seems I can enter APX mode, since it vibrates once and than stops my computer sees it but cant find device software to install for it, and shows up on devices as "APX" unidentified.
I even popped it open, pulled the power connector for the board and backup battery let it sit for a day; plugged it back in and still same issue as before. I bought it 9 months ago in December only real issue before this, is that it froze a few times but went away on its on after a reset.
Click to expand...
Click to collapse
You can give this a shot...:fingers-crossed: you need to hold the power button + volume up for about 10 seconds. You will feel the first vibration and keep holding both buttons for another few seconds then you will feel the second vibration. After the second vibration, you need to release both buttons as the same time then wait for a few seconds after that. You can try to power it up and see if it works.. Please report back and good luck.. :fingers-crossed:
LetMeKnow said:
You can give this a shot...:fingers-crossed: you need to hold the power button + volume up for about 10 seconds. You will feel the first vibration and keep holding both buttons for another few seconds then you will feel the second vibration. After the second vibration, you need to release both buttons as the same time then wait for a few seconds after that. You can try to power it up and see if it works.. Please report back and good luck.. :fingers-crossed:
Click to expand...
Click to collapse
I'll try that, I just recently left on the blank apx mode, to let the battey die completely. Now Im charging it again to see if that worked if not i'll try your idea.

[Q] xperia z3 not respondig

hello,
I had left my phone to charge at night, then this morning it was not responding. Power button was not waking up the phone. Then i forced to reset by power and volume buttons. Vibrated 3 times and completely shut off. Now it is not opening.
I already tried, reset button in sim cards slot. It is not working also. Please help me.
Did you try connecting it to PC Suite or FLashtool? Check that once and also try charging another hour and then force reset the phone. Also I think there is a reset button somewhere under the sim card slot. Try that one too.
Hold volume up and press power. Wait for beep three times. Give it a few seconds and then press power alone, should boot.
Thanks guys, i tried both but still i have sudden death. reset button and power+volume buttons not working. Also flashtool could'nt find my device.
Thats not good, any led when plugged in?
I had a similar instance after flashing unofficial cm12. Phone was cooling down from taking a run through an obvious cpu bug that really killed my battery. I shut it off to cool down with 20 precent still left in the battery. And the phone started to act this way when I went to power it on. No led power indicator or anything even with usb connected. My computer did respond to the usb being connected as if a device was there though. I waited about 10 minutes with the phone in front of some cool air and then did the volume up power button reset which worked then. Still quite a scary incident.

Categories

Resources