Hi
Thank you for reading my post.
I do not know why, but active synch does not detect my Samsung i780. Even windows shows that a SGH-i780 is detected but nothing from the ActiveSyc side.
I installed Samsung USB driver and Active Syc 4.5, My windows is XP SP2 and all anti virus and firewalls are disabled.
Any advice is appreciated.
Thanks.
j
check active sync settings .
kindly try the following steps:
1. restart your phone
2. remove all usb devices (portable hdd, flash drives, etc.)
3. connect the cable first to your phone then to your pc.
if this doesnt work try reinstalling activesyc or check your cable.
i have experienced also this kind of of problem when usb devices are connected specially storage devices.
hope this one works
hallo
i had also the same problem..but now the problem is gone, try to uncheck the box in Connection---> USB to PC--> activation advandce networkfunktion. and then restart your pc and disconnect und reconnect your phone to your PC
hope it will work.
ps. sorry for my bad english
kindly install Microsoft ActiveSync 4.5 to your pc if your phone still not detect or regonize by windows even already install samsung modem driver.it works for me.
Related
After flashing my HTC Tytn II to schapsa (4.30) ROM, the activesync connection stoped work with PC.
Kaiser trying to connect with PC, PC seems to instal a new device but it is written that device is unnown. After that I get the "cannot establish a connection..." message and finally Im getting a message that says "one of the devices attached to this computer has malfunctioned, and windows does not recognize it, Try reconnecting the device. If windows still does not recognize it, replace the device."
(similar problems was disccused here:
http://forum.xda-developers.com/showthread.php?p=1784096 )
I reflashed ROM using the SD card 5 times, did a couple of hard resets, changed ActivSync, changed cables and nothing.
Im totally scr.... up because I can not connect with PC (contacts etc) ....
Please help!
did you restart the pc - most time it helps
TQM
100 times ....
Tried deleting your device in active sync on your pc?
I uninstaled AS and instaled it for new. I dont have now any connection with any Pockets (no Pocket is on the PC list connected phones).
hey guys,
I dont have any solutions. Please help.
This must have been covered before but search does not seem to be working for me here.
I want to access the mem card in my Fuze (stock ROM) on my work PC but it needs to load a driver for the new USB device it detects. I do NOT want to install ActiveSync on the machine, only the driver that will allow the USB connection to work in Disk Drive mode.
Anyone know what file and where I could find it would allow this connection to work?
Installing applications is prohibited by company policy and installing ActiveSync would be detected. Installing a USB driver would not be.
Anyone?
the_nite_owl said:
This must have been covered before but search does not seem to be working for me here.
I want to access the mem card in my Fuze (stock ROM) on my work PC but it needs to load a driver for the new USB device it detects. I do NOT want to install ActiveSync on the machine, only the driver that will allow the USB connection to work in Disk Drive mode.
Anyone know what file and where I could find it would allow this connection to work?
Installing applications is prohibited by company policy and installing ActiveSync would be detected. Installing a USB driver would not be.
Anyone?
Click to expand...
Click to collapse
What OS are you using? Windows 2000 and definitely XP and Vista are plug and play. I'm using XP and the driver is here:
c:\Windows\system32\drivers\USBSTOR.SYS
If that driver isn't on your system, have you tried using the "Found New Hardware" wizard to connect to microsoft to automatically download the driver for you?
LBchinksTA said:
What OS are you using? Windows 2000 and definitely XP and Vista are plug and play. I'm using XP and the driver is here:
c:\Windows\system32\drivers\USBSTOR.SYS
If that driver isn't on your system, have you tried using the "Found New Hardware" wizard to connect to microsoft to automatically download the driver for you?
Click to expand...
Click to collapse
XP. The driver is not found by the wizard. I have had this on other systems before.
It is installed during the ActiveSync install. If you uninstall ActiveSync the driver is left behind and will still function but corporate policy has gotten strict on unapproved installs and traces are always left behind even after uninstall.
I will look on my home device for the file and see if I can move it to my work PC and get it working.
Thanks.
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
[email protected] said:
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
Click to expand...
Click to collapse
what os?
try a new cable, or try plugging the cable into a different usb port.
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
You could just update to the latest HTC ROM from the official website if your phone is still under warranty, btw thats what i did but it didn't help. Note, that i'm running Windows 7 as my OS if anyone want to know this information to help solve the problem. Thanks in advance.
[email protected]
wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
Settings-->Connections-->USB to PC and Uncheck Enable faster data Synchronization
I have the same problem.
in my situation i tried to recover usb-flash and flash a nokia phone. For both things programs installed their own drivers. Even after I deinstalled the software I probably still have their drivers on my pc. That's why I can't sync my phone...
is there a tool to manage installed drivers?
or the other way out is to reinstall windows 7
anyone willing to help?
This solution worked for me:
Thanks to Scubamike
copy and paste from
http://social.microsoft.com/Forums/...c/thread/7a6516e2-9a46-4e1f-b689-1aa7dc2bda64
I found a different solution that worked for me: On my phone I clicked start/programs/active sync/options and deleted all the old PC connections that were displayed. In fact, you could probably just delete ALL the PC connections displayed and start from scratch. You'll just have set up another sync partnership in WMDC when you plug it in. Let me know if this helps.
it is to easy! should work ALWAYS:
Make sure "Advanced network functionality" is switched off in the USB to PC settings then:
go to activesync, menu, connections, disable "connect via USB" off, press "ok" go back to connections, enable "connect via usb" press "ok" unplug and replug your cable. and all works.
greetings
i had trouble with a 6.5.3 rom i just cooked. had to uninstall, reboot, reinstall wmdc, then i synced okay.
I have the last original rom and win 7 and with removing all remembered connections on the pda, it connected immidiatly. Thank you for the help
i have been all over the microsoft forums to no avail. i recently updated my laptop to win7, and have a fuze running 6.1 mobile. when i connect my fuze to the laptop the laptop recognizes it as it begins to charge, but then nothing. i try to open win mobile device center and this is the error message i get C:\windows\system32\rapistub.dll is either not designed to run on windows or it contains errors. I have uninstalled and reinstalled 3 times and also tried different usb ports on my laptop. If anyone can help that would be awesome
hi, im a new user and i have a problem connecting my spv c600 to my pc(windows xp)via usb. every time i try to connect my device the pc detects at first but then says"a problem occurred during installation your new hardware might not work properly" i have activesync 4.5 installed but it does not detect. i was wondering if there is a free driver i could download to sort this problem .please i need your help because i want to upgrade the rom
Windows Mobile devices are connected either via RNDIS or Serial over USB. Usually the decice is in the mode to connect over RNDIS, but when the drivers are missing on the PC they must be installed there. Look for generic RNDIS drivers on windows XP. You could also try to switch the device to Serial over USB mode. This hides in a something like "enhanced functionality" on the USB connection. On is "RNDIS" while off is "Serial" mode.
where can this "enhanced functionality" be found, on the device or on the pc, please guide me i'm kind of new on this things
It is on the phone, probably somewhere in the settings menu. No clue about the menu on your phone as I use a cooked WM6 ROM. Possibly it is even only hidden in the registry somewhere. You will have to search XDA for this a little yourself - I cannot guide you through this.
thanx for yor help
Hi,
Have bought a clone Galaxy s4 i9500 phone. Korean Made
Can connect to pc as usb storage device but not as a phone.I am not able to see the operating system files via usb storage just ordinary files. The phone has not any app buttons just a few games preloaded. When connecting to the internet the Baidu page comes up (Chinese)
The phone has limited settings ie Phone settings, Display, Security, Call settings and Connections
Due to this I am unable to check phone components in order to load drivers to connect or to enable usb debugging mode.
Did reset phone and tried many drivers and connection managers.
Phone memory apparently 1.2M? Memory file use presently 884.01k/1.2M
The phone does not have a file manager.
When connecting to a pc the following settings come up, Charging, U Disk and PC Connecting. PC Connecting under under other devices show as Two Usb Devices when connected. I use xp sp3 on the pc.
Downloaded apk programs to pc then to sd card on phone but unable to open them.
The phone built is as below
Can anybody on the forum identify the phone by the pictures.
Thank you
my gfs has the same phone, the korean version, the correct usb driver is an HTC one... i don't know what i did, but windows auto update downloaded that for me and it worked!!! this is just a first step for me.... now i need to root it, and still not getting it .. and no much ppl can help :| anyway for the driver, i hope it works for you! cheers!