Database Info

ActiveSynch does not detect my Samsung i780, What should I do?

Hi
Thank you for reading my post.
I do not know why, but active synch does not detect my Samsung i780. Even windows shows that a SGH-i780 is detected but nothing from the ActiveSyc side.
I installed Samsung USB driver and Active Syc 4.5, My windows is XP SP2 and all anti virus and firewalls are disabled.
Any advice is appreciated.
Thanks.

j
check active sync settings .

kindly try the following steps:
1. restart your phone
2. remove all usb devices (portable hdd, flash drives, etc.)
3. connect the cable first to your phone then to your pc.
if this doesnt work try reinstalling activesyc or check your cable.
i have experienced also this kind of of problem when usb devices are connected specially storage devices.
hope this one works

hallo
i had also the same problem..but now the problem is gone, try to uncheck the box in Connection---> USB to PC--> activation advandce networkfunktion. and then restart your pc and disconnect und reconnect your phone to your PC
hope it will work.
ps. sorry for my bad english

kindly install Microsoft ActiveSync 4.5 to your pc if your phone still not detect or regonize by windows even already install samsung modem driver.it works for me.

Windows Mobile Device Center doesn't sync

So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]

[email protected] said:
So i got this error with a big "X" inside this red circle and next to it just says the word "Error" then nothing else when i tried sync using WMDC thats what happens. Btw im using a HTC Touch Pro and i tried plenty of solution from the Microsoft website this includes the following:
-Uninstalling the device driver and reconnect the device
-Disabling Advance Network Functionality
-Disabling firewall, antivirus software etc.
-Running WMDC on compatability mode
-Soft resetting device
-Hard resetting device
-Flashing a new ROM
Thanks in advance
[email protected]
Click to expand...
Click to collapse
what os?
try a new cable, or try plugging the cable into a different usb port.

i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way

wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
You could just update to the latest HTC ROM from the official website if your phone is still under warranty, btw thats what i did but it didn't help. Note, that i'm running Windows 7 as my OS if anyone want to know this information to help solve the problem. Thanks in advance.
[email protected]

wishmaster86 said:
i got the same problem. my pc:
Windows 7 with windows device center.
can not recognise my device.
i plug in the touch pro. i get the message to choos active sync diskdrive or share my internet.
i choose active sync.
then nothing happens in device center.
tried uninstalling rndis. after restart it installes the phone again and then it works for 1 time only. after that its the same.
i have searched forums saying that uninstalling device center does not solve the problem. also they say downloading the version on the MC site is another version that Windows 7 is shipped with.
Need help, wanna install another rom. i do have another pc, but i wished it would work on this pc.
any help would be very appreciated.
EDIT 24-10-2009
Also got this message at the properties of Microsoft Windows Mobile Remote Adapter:
This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
Hope that this could help me in some way
Click to expand...
Click to collapse
Settings-->Connections-->USB to PC and Uncheck Enable faster data Synchronization

I have the same problem.
in my situation i tried to recover usb-flash and flash a nokia phone. For both things programs installed their own drivers. Even after I deinstalled the software I probably still have their drivers on my pc. That's why I can't sync my phone...
is there a tool to manage installed drivers?
or the other way out is to reinstall windows 7

anyone willing to help?

This solution worked for me:
Thanks to Scubamike
copy and paste from
http://social.microsoft.com/Forums/...c/thread/7a6516e2-9a46-4e1f-b689-1aa7dc2bda64
I found a different solution that worked for me: On my phone I clicked start/programs/active sync/options and deleted all the old PC connections that were displayed. In fact, you could probably just delete ALL the PC connections displayed and start from scratch. You'll just have set up another sync partnership in WMDC when you plug it in. Let me know if this helps.

it is to easy! should work ALWAYS:
Make sure "Advanced network functionality" is switched off in the USB to PC settings then:
go to activesync, menu, connections, disable "connect via USB" off, press "ok" go back to connections, enable "connect via usb" press "ok" unplug and replug your cable. and all works.
greetings

i had trouble with a 6.5.3 rom i just cooked. had to uninstall, reboot, reinstall wmdc, then i synced okay.

I have the last original rom and win 7 and with removing all remembered connections on the pda, it connected immidiatly. Thank you for the help

i have been all over the microsoft forums to no avail. i recently updated my laptop to win7, and have a fuze running 6.1 mobile. when i connect my fuze to the laptop the laptop recognizes it as it begins to charge, but then nothing. i try to open win mobile device center and this is the error message i get C:\windows\system32\rapistub.dll is either not designed to run on windows or it contains errors. I have uninstalled and reinstalled 3 times and also tried different usb ports on my laptop. If anyone can help that would be awesome

[Q] usb connection problems

hi, im a new user and i have a problem connecting my spv c600 to my pc(windows xp)via usb. every time i try to connect my device the pc detects at first but then says"a problem occurred during installation your new hardware might not work properly" i have activesync 4.5 installed but it does not detect. i was wondering if there is a free driver i could download to sort this problem .please i need your help because i want to upgrade the rom

Windows Mobile devices are connected either via RNDIS or Serial over USB. Usually the decice is in the mode to connect over RNDIS, but when the drivers are missing on the PC they must be installed there. Look for generic RNDIS drivers on windows XP. You could also try to switch the device to Serial over USB mode. This hides in a something like "enhanced functionality" on the USB connection. On is "RNDIS" while off is "Serial" mode.

where can this "enhanced functionality" be found, on the device or on the pc, please guide me i'm kind of new on this things

It is on the phone, probably somewhere in the settings menu. No clue about the menu on your phone as I use a cooked WM6 ROM. Possibly it is even only hidden in the registry somewhere. You will have to search XDA for this a little yourself - I cannot guide you through this.

thanx for yor help

[Q] USB Not Recognized

So all of the sudden my computer, or other computers wont recognize my phone.
I might be answering myself, but maybe my socket is kind of/might of broken?
When I connect it, I still get the CHARGE ONLY or DISK DRIVE option, but my computer(s) doesnt recognize it. I have to try several times inserting it for my computer to recognize it. I used my other HTC INSPIRE chargers..same problem..
I read on other forums that, their device is having the same problem as mine, at all of the sudden.
even my USB DEBUGGING mode wont recognize on the computer..
help....
EDIT: some people are saying something about MOUNTING/UNMOUNTING SD CARD.

If you're using windows, check the device manager and make sure it's not an "unknown" device. If it is, try manually installing the device (using HTC sync drivers or Android SDK drivers). If that doesn't work, open the properties of the unknown device, and find the device ID and check it against the listed ID's in the .INF files for the driver. (Had to hack them recently to get ADB working, presented the "wrong" device....)

[Q] USB connection related problems

hello,i have several problems that are making me very angry.i use updated windows 7 32 bit.
1.i have samsung kies and my device was working normaly,but then today when i connected my phone to pc i got code 43 error device not recognized.i tryed reinstalling kies uninstalling drivers re installing nothing helps i cant even connect when i am in download mode same error.I NEED SOME ANSWERS ASAP COZ IT IS DRIVING ME CRAZY.
2.this one is bit smaller but also annoying,it was happening while usb connection was still working,when i connect my phone(any mode kies or mass storage),then when i copy files from pc to phone it working fine,but when i try to copy something from phone to pc i get random disconnects (connection loss) there is no logical explenation coz its totally random,lets say i copy 100 pics i get dc after 10 then i reconnect phone and click retry he copy 15 more and dc again.
Any1 will any solution plz help coz my phone is at mess atm and cant flash anything.

the source of the usb issue may be your computer.
1) did you always use the same usb port for your phone?
2) how old is your computer?
3) do you live in a humid environment?
I live on guam, and on my older laptop (only two years old!!!), running winxp, 3 of 4 usb ports are no longer usable due to corrosion. they give errors and even when working, sometimes I could lose the connection by moving the cable slightly. also, the last usb port is now getting difficult to use because it's hard to plug in anything
so, if you answered yes to #1, try another port and be prepared to install the drivers again.
if you answered yes to #3, be prepared to replace your usb if they are indeed corroded

well thnx for answer,but my pc is new like 7 months old,usb ports are working just switched mouse and phone mouse working phone not.its driver relater before i had that error and some1 from xda told me to delete everything(kies drivers) related to phone and his drivers and it worked i also see that error(code 43 is common) but fix with uninstalling driver(worked before now doesnt).thing is that something at that moment didnt work well on phone(last time it was my external sd card had to format it)and now pc keeps repeating same error.simply even tho all drivers are installed i get device not recognized,and under device manager it unknown device,also when i tick option to see hidden devices i see omap 3630 but state is unconnected.

xGiox said:
1.i have samsung kies and my device was working normaly,but then today when i conne.............
2.this one is bit smaller but also annoying,it was happening while usb connection was still working,....................
Click to expand...
Click to collapse
When transferring files to and from pc, do you use the original USB cable that came with the phone? Because when i use other cables, i have this issue, when i use the original cable, no probs at all.
if that also doesnt work, try formatting internal and external SD cards

xGiox said:
well thnx for answer,but my pc is new like 7 months old,usb ports are working just switched mouse and phone mouse working phone not.its driver relater before i had that error and some1 from xda told me to delete everything(kies drivers) related to phone and his drivers and it worked i also see that error(code 43 is common) but fix with uninstalling driver(worked before now doesnt).thing is that something at that moment didnt work well on phone(last time it was my external sd card had to format it)and now pc keeps repeating same error.simply even tho all drivers are installed i get device not recognized,and under device manager it unknown device,also when i tick option to see hidden devices i see omap 3630 but state is unconnected.
Click to expand...
Click to collapse
Jack_Random said:
When transferring files to and from pc, do you use the original USB cable that came with the phone? Because when i use other cables, i have this issue, when i use the original cable, no probs at all.
if that also doesnt work, try formatting internal and external SD cards
Click to expand...
Click to collapse
i use original cable and also i did format both external and internal cards several times my first problem is kinda more important atm.

ok i tried connecting my phone to secondary pc running xp gave me same error but simple uninstall of driver and reinstall made it work cant fix it on win 7.
Edit: damn phone wont connect when in download mode cant flash anything -.-.

Connect the phone and go to device manager
If you see the i9003 driver uninstall it then connect the phone to pc again
now windows 7 will download the driver automatically
that's how I fixed my problem