I have tried upgrading my rom and have had trouble with that. it is stuck on the RGB screen and the IPL is 1.05 and the SPL is 3.08. How can i fix this problem?
I have tried installing the XM6r5 and it stops at 99%. I am all out of ideas.
By what i see you have ipl 1.05 SPL 1.05
Have you CID unlocked the device?
Update the wizard again with the ROM 3.08
When you have both IPL/SPL 3.08 than you can try again.
Anyway double check
this.
Its giving alot of trouble
It is giving me trouble w/ the first option with reflashing. it stops at 98% and errors. trying to download the other flash. we will see how that goes
Not a brick anymore
well, i belive that worked. i will find out in the hours to come
Why don't you people read before tossing the coin with an expensive device ?
You must have 2.XX bootloader before you try an attempt at flashing any WM6 rom. Read the sticky-es to know how to or what to do.
I just hope you didn't bricked your device for good.
NOt sure if this is in the right topic, but its slightly rom related.
Can someone please help a noob
I cid unlocked my phone following the topic
http://forum.xda-developers.com/showthread.php?t=375583.
all worked well, tried a couple of roms and settled on
L26 WM 6.1 Professional WWE V6a (MMS and JAVA updated) rom, seems to be working ok, certainly all my apps work.
However like a typical noob I missed out on some important reading about hard spl and how it can protect my phone from a bad flash.
Now that I've done all of the above, is it too late to go back and protect my phone with hard spl?
SPL -1.0. Olipof
thanks in advance
I think that's done automatically when you flash hard spl.
(someone correct me if i'm wrong please)
step one in that unlocker would have flashed hardspl on your device, if u skipped it then no, its not too late, you can still do it now
XtreMe_G said:
step one in that unlocker would have flashed hardspl on your device, if u skipped it then no, its not too late, you can still do it now
Click to expand...
Click to collapse
No i didnt skip step one, so I guess I'm covered.
Guys thanks for the help, much appreciated!
Just go into bootloader mode (power button + camera button + reset). If the screen shows SPL-1.0.OliPof then you are ok. If not then just reflash hardSPL.
SPL-1.0.OliPof is there in bootloader.
thanks for the help guys.!
i was thinking the other day and came to wonder about hard SPL. we always stress to the n00bs that it is very VERY VERY important, but then i noticed that the htc rom tool in the kaiser kitchen has a place to build an spl into the rom. can't we just put the spl from hard spl into the rom tool on all of our cooked roms and save everyone a step later? i wasn't sure who to ask and i don't have a kaiser without hard spl with which to test this so i am asking anyone who can answer sorry if i'm not seeing why this can't be done
I think you've forgotten something.
HardSPL is needed to be able to flash your device. So even if HardSPL is baked into a custom ROM, it wouldn't matter. HardSPL has to be installed first, no matter what. Not having HardSPL installed would prevent you from flashing a ROM.
Luckily installing HardSPL ins't really that hard.
meschle's Artemis ROM's have two batch files.
#1 for HardSPL
And
#2 for the CustomRRU.
So First time flashers can't really go wrong.
Ta
Dave
Yeah but hard SPL does not always work the same way. Some get white screen. I got 3 devieces. All 3 original TyTN II's. First one (my first deviece) flashed spl easly. But the other 2 deviece were getting white screen. Finaly I managed to Hard SPl it but in a other way.
xmoo said:
Yeah but hard SPL does not always work the same way. Some get white screen. I got 3 devieces. All 3 original TyTN II's. First one (my first deviece) flashed spl easly. But the other 2 deviece were getting white screen. Finaly I managed to Hard SPl it but in a other way.
Click to expand...
Click to collapse
Good point, I forgot that.
Dave
I have been up and down the forums for a few weeks now trying to figure this out. I just got a new tilt from AT&T (replacing another one) and I cannot get any HardSPL version installed on it. I had no problems with my original Tilt installing roms etc.
The Hard SPL install runs through like usual, but when I check the bootloader (camera button reset) it still shows mfg bootloader. I do not get the 'white screen' issue, because everything goes through just fine. I have tried the white screen fix version and no luck.
Any Ideas?
thanks
wgeoff said:
I have been up and down the forums for a few weeks now trying to figure this out. I just got a new tilt from AT&T (replacing another one) and I cannot get any HardSPL version installed on it. I had no problems with my original Tilt installing roms etc.
The Hard SPL install runs through like usual, but when I check the bootloader (camera button reset) it still shows mfg bootloader. I do not get the 'white screen' issue, because everything goes through just fine. I have tried the white screen fix version and no luck.
Any Ideas?
thanks
Click to expand...
Click to collapse
what is the version number of spl in ur bootloader? i know latest att is 3.56
can you give us some info on your tilt. what SPL is on there now? please list all the numbers found when you put your phone into bootloader
KAIS1*0 MFG
SPL-1.0.0liPof
CPLD-8
Added info:
r:1.27.14.09
g:22.45.88.07h
d:1.62.00.00
My main reason for the hard spl is for a radio upgrade that doesnt seem to take even though it says ok. might noe be a hard spl issue? trying to use NEON_Radinly_1.58.25.17_CustomRUU and everything passes but no radio change
wgeoff said:
KAIS1*0 MFG
SPL-1.0.0liPof
CPLD-8
Added info:
r:1.27.14.09
g:22.45.88.07h
d:1.62.00.00
My main reason for the hard spl is for a radio upgrade that doesnt seem to take even though it says ok. might noe be a hard spl issue? trying to use NEON_Radinly_1.58.25.17_CustomRUU and everything passes but no radio change
Click to expand...
Click to collapse
You already have a version of hard spl on the phone. spl 1.0 0liPof is the first version of hardspl. To get another version on you have to use soft spl or jump spl then run it. See the sticky on the new versions of spl. There are detailed instructions there. http://forum.xda-developers.com/showthread.php?t=396922
wgeoff said:
KAIS1*0 MFG
SPL-1.0.0liPof
CPLD-8
Added info:
r:1.27.14.09
g:22.45.88.07h
d:1.62.00.00
My main reason for the hard spl is for a radio upgrade that doesnt seem to take even though it says ok. might noe be a hard spl issue? trying to use NEON_Radinly_1.58.25.17_CustomRUU and everything passes but no radio change
Click to expand...
Click to collapse
you already have hardspl ... see that "spl-1.0.0lipof".. thats it. That neon radio is mainly for diamond builds and works on some of the wm6.1 roms. From the info you provide looks like you have a wm6 rom.. before trying this radio flash a wm6.1 rom and than give the radio a shot.
thesire said:
you already have hardspl ... see that "spl-1.0.0lipof".. thats it. That neon radio is mainly for diamond builds and works on some of the wm6.1 roms. From the info you provide looks like you have a wm6 rom.. before trying this radio flash a wm6.1 rom and than give the radio a shot.
Click to expand...
Click to collapse
you know what they say about great minds
There are now a large selection of Kaiser Hard SPL's floating about. I am making this thread as a collection for all of them and the instructions for flashing them.
Explanation
WM Version - Different SPL's perform better depending if you are running WM6.0 or WM6.1. If you are using a WM6.0 ROM, you should be using a WM6.0 Hard SPL (v1 is recommended). If you are using WM6.1 any 3.* SPL is recommended.
Hard SPL Version - Most WM6.1 ROM's are based of a 3.* release by HTC / ATT. The 3.* Hard SPL version should match this the best it can.
MFG - Manufacturing. This SPL supports more commands (such as rtask a)
jockyw2001 - Any Hard SPL made by jockyw2001 (WM6.1 versions)
cmonex - Any Hard SPL made by cmonex.
DaveShaw - Any bootloader patched by me. Will be the same as cmonex's because I copied her changes from previous versions - all credit to her .
Force USB - These SPL's have a fix to force the USB to work if it is not working for some reason.
nostuckinSPL - These SPL's have a fix to prevent you getting stuck at the bootloader as often.
Versions
Windows Mobile 6
-Hard SPL V1 (1.00.OliPof) [MFG] by pof / Olipro - Download and Instructions in the linked thread.
-Hard SPL V1.1 (1.1.JockyW) [MFG] by jockyw2001 - Download and Instructions in the linked thread.
-Hard SPL V1 nostuckinSPL Force USB [MFG] by cmonex - download only.
Windows Mobile 6.1 - All links are to the downloads, instructions to follow.
jockyw2001 (.hard)
3.07 Hard SPL / Force USB
3.28 Hard SPL / Force USB
3.29 Hard SPL / Force USB
3.56 Hard SPL / Force USB
cmonex (.hard2)
3.29 Hard SPL nostuckinSPL / Force USB
3.31 Hard SPL nostuckinSPL Force USB
3.56 Hard SPL nostuckinSPL / Force USB
DaveShaw (.hard)
3.34 Hard SPL nostuckinSPL Force USB
Instructions
If this is your first time flashing an SPL, take some time to read up on the other stickies (mskip's in particular) and wiki pages, this is more of a reference thread.
How to Install A Hard SPL:
Plug the device into your PC
Copy JumpSPL (either 1.56, 1.93 or 1.94) to your device.
Take out your SD card & SIM Card.
Run Jump SPL on your device
Wait for the bootloader screen to appear and "USB" to show.
Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
Download the attached files from the first instructions
Pull out the battery and reinsert it (this step *is* important)
Connect your PC to phone with a USB cable
REMOVE SIM and SD CARDS !!
Copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe and if you still get a white screen then reset your device and now try JumpSPL1.94-KAIS.exe
After a few seconds "USB" appears on the phone display
Unplug and replug the usb cable
Deselect "Allow USB connections" in Activesync connection settings
Now flash hardSPL (run KaiserCustomRUU.exe on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
Upgrading SPL via SD Guide - Only works if you already have Hard SPL.
Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
Download the SPL you want to flash from the links above.
Rename the NBH file you downloaded to KAISIMG.nbh.
Download KAISDIAG.nbh from here.
Insert the microSD Card into the phone
Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
It should say Loading / Update in progress and then to a screen saying SPL 1.00.OliNex
It should now say Press Power Button to flash or just flash the KAISIMG.NBH and then reset
At this point it should boot to the OS, if it doesn't then flash an OS (delete the previous KAISDIAG.NBH and KAISIMG.NBH from the SD Card and use Flashing Rom from MicroSD Card method)
After the Operating System loads, DELETE the KAISDIAG.NBH and KAISIMG.NBH files
FOR ANYONE WITH QUESTIONS ABOUT WHAT THIS IS FOR, WHY YOU WOULD NEED IT, OR HOW TO PERFORM SPL PROCEDURES: Read This Wiki page
FAQ (Not 100% applicable to this but a good source).
Thanks (in order of appearance)
pof
Olipro
jockyw2001
cmonex
Kyphur
mskip
I'm off home now I might not be back on for a while.
Post any problems here and I'll update / clean up this thread when I get home.
Ta
Dave
Very nice! Thanks for putting it all in 1 place!
Removed. I flashed 3-4 times and it finally took. Thank you for your help. Anyone else have a preference on a HARD SPL?
Hyden121 said:
Removed. I flashed 3-4 times and it finally took. Thank you for your help. Anyone else have a preference on a HARD SPL?
Click to expand...
Click to collapse
Was just about to reply. Glad you sorted it. I've had problems changing SPL before. The second set of instructions using Jump SPL worked. Also cmonex's KAISDIAG.nbh method works everytime.
I'm using 3.34 Hard SPL for 2 reasons.
1. The ROM I'm using is is based on the 3.34 ROM.
2. I made it (with cmonex's help ).
Dave
I saw that. I am using it as well but was curious if the 3.56 SPL was better in anyway. Either way it is great to finally have a new SPL and it only took me 1 year.
thanks dave! i've flased it and all seems well. my keyboards only have 2 keys you have to press a bit more firmly than the rest rather than 9 with 3.29 so that's much better!
had trouble flashing via customruu so did the microsd card thing. kinda weird though, last night, i couldn't get the microsd approach going with 3.29cmonex. so i flashed via customruu and it worked. now with 3.34, i couldn't get the customruu to work, so i did the microsd approach. anyway, so long as it works!
Thanks DaveShaw, you've really helped new-to-Tytn2 people like me a lot. A good beginning to the ROM experiencing journey
3.34 hardSPL tested ok for my kaiser,thanks to Daveshaw.
nice post, can anyone post his/her experience with the SPLs, meaning if better speed, battery life,....etc
thx dude
Could you explain what is the major advantage of using your 3.34 HardSPL toward to the other Hard SPLs?
I still have no idea about those HardSPLs differences so I'm using latest(? 3.54).
Thank you.
kurobosi said:
Could you explain what is the major advantage of using your 3.34 HardSPL toward to the other Hard SPLs?
I still have no idea about those HardSPLs differences so I'm using latest(? 3.54).
Thank you.
Click to expand...
Click to collapse
All Kaiser ROMs (Cooked or not) are based on a Official release (some cooked roms are based on more than one). Here's a list of the official releases: Kaiser ROMs.
You'll notice the version numbers are all 3.* for the WM6.1 ROM's. People have noticed if you are using the SPL version that matches your ROM version you get less screen freezes.
Sometimes you can't match them perfectly, so a little trial and error can help you find the best match.
Hope this helps.
Dave
DaveShaw said:
All Kaiser ROMs (Cooked or not) are based on a Official release (some cooked roms are based on more than one). Here's a list of the official releases: Kaiser ROMs.
You'll notice the version numbers are all 3.* for the WM6.1 ROM's. People have noticed if you are using the SPL version that matches your ROM version you get less screen freezes.
Sometimes you can't match them perfectly, so a little trial and error can help you find the best match.
Hope this helps.
Dave
Click to expand...
Click to collapse
great work dave but i have to ask something...
is there such a thing as the ultimate spl? meaning it's a bit troublesome to keep changing spl's based on the original builds of our cooked roms...since they keep coming from different sources...
from ur experience, which spl is the stablest with the newer cooked roms..
i've been using cmonex's 3.29 since it came out and to me it seems compatible with any rom i throw at it...
is ur 3.34 the new 3.29 hard2?
mazin13 said:
great work dave but i have to ask something...
is there such a thing as the ultimate spl? meaning it's a bit troublesome to keep changing spl's based on the original builds of our cooked roms...since they keep coming from different sources...
from ur experience, which spl is the stablest with the newer cooked roms..
i've been using cmonex's 3.29 since it came out and to me it seems compatible with any rom i throw at it...
is ur 3.34 the new 3.29 hard2?
Click to expand...
Click to collapse
No idea. I've been using it for a while now but I don't flash cooked ROMs much at the moment
Try it for a bit and it you like it keep it
Only cmonex knows what's going on inside the SPLs.
Ta
Daev
Great work dave, seems you are quite good in organising things, Was missing such a nice piece of thread & must have started had I been so much in to it. Thanks again. Good luck.
DaveShaw said:
There are now a large selection of Kaiser Hard SPL's floating about. I am making this thread as a collection for all of them and the instructions for flashing them.
MOD EDIT Snip...
Click to expand...
Click to collapse
Hi! I have weird problem with HTC Kaiser (or HTC TyTn II).
At the boot of Windows Mobile 6.1 i got the message "the device is clearing storage..." and then the device shutdown, the right led is stuck in blue and when I try to Upgrading SPL via SD my phone stuck at white screen and said loading...
I'm confused so I write this problem here. everything I do fails including mtty process. what can i do, help me please.
Thanks for advice.
Greetings!
neilus said:
Hi! I have weird problem with HTC Kaiser (or HTC TyTn II).
At the boot of Windows Mobile 6.1 i got the message "the device is clearing storage..." and then the device shutdown, the right led is stuck in blue and when I try to Upgrading SPL via SD my phone stuck at white screen and said loading...
I'm confused so I write this problem here. everything I do fails including mtty process. what can i do, help me please.
Thanks for advice.
Greetings!
Click to expand...
Click to collapse
Sound's like the ROM is at fault rather than SPL.
Try a hard reset, if that doesn't work, try flashing a new ROM via the bootloader.
Thanks
Dave
DaveShaw said:
Sound's like the ROM is at fault rather than SPL.
Try a hard reset, if that doesn't work, try flashing a new ROM via the bootloader.
Thanks
Dave
Click to expand...
Click to collapse
Hi Dave, thanks to reply, as I said I think I try everything and everything I do fails including mtty process, I try flashing a new AT&T ROM via usb cable at the BootLoader screen and the process completed 100% and when restart of Windows Mobile 6.1, I got the message "the device is clearing storage..." and then the device make a strange "sound" and shutdown, I was Tried a hard reset, doesn't work, I tried flashing a hardspl via the bootloader but unsuccessful, when I try to Upgrading SPL via SD my phone stuck at white screen and said loading.... when I try to Upgrading SPL via SD with the same SD to another phone its work.
Thanks.
@neilus,
Since Dave mentioned ROM issue, I suggest you re-download again the ROM (just to make sure you got it clean and good) and re-flash. What was your O/S or ROM before flashing? The SPL is important to match the ROM version .. if you're from 6.0, then you need to flash a ROM that comes complete with SPL (such as OEM upgrade ROM)
Otherwise, go back to starting point and read through the newbies guide and this (especially for your stuck on white screen)
anagarika said:
@neilus,
Since Dave mentioned ROM issue, I suggest you re-download again the ROM (just to make sure you got it clean and good) and re-flash. What was your O/S or ROM before flashing? The SPL is important to match the ROM version .. if you're from 6.0, then you need to flash a ROM that comes complete with SPL (such as OEM upgrade ROM)
Otherwise, go back to starting point and read through the newbies guide and this (especially for your stuck on white screen)
Click to expand...
Click to collapse
Hi anagarika, look this:
model : KAIS1*0
SPL-1.93.0000
CPLD-8
I was flashing a new ROM via the bootloader, original AT&T rom, everything work fine at the flashing process and finish 100%, when the unit charge and swich on going to first windows logo screen and with sound switch itself off (the sound is named "LB" I think).
Thanks a lot.