I have tried upgrading my rom and have had trouble with that. it is stuck on the RGB screen and the IPL is 1.05 and the SPL is 3.08. How can i fix this problem?
I have tried installing the XM6r5 and it stops at 99%. I am all out of ideas.
By what i see you have ipl 1.05 SPL 1.05
Have you CID unlocked the device?
Update the wizard again with the ROM 3.08
When you have both IPL/SPL 3.08 than you can try again.
Anyway double check
this.
Its giving alot of trouble
It is giving me trouble w/ the first option with reflashing. it stops at 98% and errors. trying to download the other flash. we will see how that goes
Not a brick anymore
well, i belive that worked. i will find out in the hours to come
Why don't you people read before tossing the coin with an expensive device ?
You must have 2.XX bootloader before you try an attempt at flashing any WM6 rom. Read the sticky-es to know how to or what to do.
I just hope you didn't bricked your device for good.
Related
Hi guys
I know this has been asked a million times before, but trust me, I've tried following the tutorials posted her but with no luck.
So here goes:
I've tried flashing this ROM:
http://rapidshare.com/files/24185105/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
via awizard but it stopped so I've unplugged it, got it into bootloader mode and flashed with the xplore WM6 ROM but it just hangs at the boot up screen after restarting.
G3 device
IPL 3.08
SP 3.08
GS 0.269.11
OS 3.8.2.2
Any ideas?
sav_za said:
Hi guys
I know this has been asked a million times before, but trust me, I've tried following the tutorials posted her but with no luck.
So here goes:
I've tried flashing this ROM:
http://rapidshare.com/files/24185105/ruu_vario_aku3.3_3822_382120_026911_tmo_de_ger_ship.zip
via awizard but it stopped so I've unplugged it, got it into bootloader mode and flashed with the xplore WM6 ROM but it just hangs at the boot up screen after restarting.
G3 device
IPL 3.08
SP 3.08
GS 0.269.11
OS 3.8.2.2
Any ideas?
Click to expand...
Click to collapse
Was your wizard CID unlocked ?
I see that you have OS 3.8.2.2 , that is not my OS. It should have been 10.2.0.8.
That means your wizard might have been locked.
Very strange.
I did run CID-unlock first. It was running xplore before I tried flashing the tmobile rom, so maybe the images didn't get flashed.
Anything I can do to fix it?
Okay, I'm busy trying to flash the wizard_love rom. Been sitting at 96% for a while lets hope it goes further.
Okay, the upgrade went through. OS2.26
XDS-dev tutorials and the love rom for the win! Now I can relax again...
Will flash to WM6 soon.
sav_za said:
Okay, the upgrade went through. OS2.26
XDS-dev tutorials and the love rom for the win! Now I can relax again...
Will flash to WM6 soon.
Click to expand...
Click to collapse
Heh. So now that you have found the tutorials helpful, perhaps you'd consider changing the thread title?
--M
Sorry about that, have changed it.
For some reason I can't get it back to WM6 but will try again and keep you guys posted. Device is definitely CID unlocked, but for some reason it keeps hanging at the boot screen.
OKay, assuming my wizard got CID-locked for some reason, how do I downgrade to ver1 to unlock it again?
I've downloaded button's ver1.05 rom. Can I just install it, or will it give me an error saying I need a newer ROM?
Sorry for all the questions, I just don't want to take any chances.
sav_za said:
OKay, assuming my wizard got CID-locked for some reason, how do I downgrade to ver1 to unlock it again?
I've downloaded button's ver1.05 rom. Can I just install it, or will it give me an error saying I need a newer ROM?
Sorry for all the questions, I just don't want to take any chances.
Click to expand...
Click to collapse
Luke....use the Force... Follow the steps in the tutorial link (in my sig.) but the short answer is "yes".
--M
Hehe, thanks I've done that. Will try tomorrow, thanks.
I feel like a bit of a plonker asking so many questions with such obvious answers.
Okay, after a LOT of trial & error I've finally gotten it back to WM6. Here's what I did:
1)Downgraded to IPL/SPL 1.01 using button's ROM
2)CID unlocked using lokiwiz
3)Upgraded to mr_clean AKU2.3
4)Upgraded to Faria's WM6
I didn't use aWizard as usual, just the rom upgrade utilities that came with these ROMS.
Hope this helps anyone that's struggling with the same problems I've been having.
Thanks for the tutorials, they've been a great help. The only part that didn't work for me was upgrading to T-mobile's 2.26 because it would freeze on the bootup screen after upgrading to WM6. Replace that step with mr_clean 2.3 and it works fine.
hey how did you get your wizard_love rom to get past 96% without crashing? mine just gives me error 302, which is ERROR [302~318] : UPDATE ERROR
any clue? thanks
mapleman321 said:
hey how did you get your wizard_love rom to get past 96% without crashing? mine just gives me error 302, which is ? ERROR [302~318] : UPDATE ERROR
any clue? thanks
Click to expand...
Click to collapse
Hi
I got the phone into bootloader mode then it worked fine. It got stuck at 94% iirc but I just left it until it finished.
Hope this helps
Hello I have a CID locked G4 HTC Wizard(T-Mobile MDA) and am trying to flash faria's new rom to my wizard. When I use the RUU I get an error at 99% and have to reflash the original rom provided by T-Mobile and then when I use shelltool(I installed enablerapi.cab and also cert_spcs.cab and restarted the device like instructed to do), I get stuck on the boot screen and this is what I get.
IPL: 2.26.0001
SPL: 2.26.0001
GSM: 02.25.11
OS: 2.18.0.0
If anyone has an idea of a way to circumvent this issue, please help me because I really want to install this rom.
Thanks, Dan.
don't flash the rom using RUU method. Sounds like you aren't letting shelltools finish all the way. In shell tools install the two cabs wait a few minutes,restart, flash using shelltools, let it sit for about a half hour if it doesn't give you a end confirmation.
Actually i am installing both cabs provided in the shelltools download and then waiting a few mins and then rebooting the phone and then ran shelltools and waited untill it instructed me to hard reset and and did exactly as it told me to do and even tapped the screen as soon as the phone came back on as faria reccomended. It just seems to get stuck on the initial boot screen where it tells you your ips and spl.
Edit: Just tried again to flash the rom using the shelltools program with no success... I used the readme pdf and did exactly what it said to do and it just wont install. I think I'm just going to wait untill I can shell out the money to have the phone CID unlocked.
Thanks for trying to help me though. I appreciate it.
Are you flashing an official rom everytime before you flash a cooked rom? That's what is recommended. Have you taken out your sdcard when you flash, and turning of any virus scanner and also your radio? These are some suggestions to try. Reason why I said try again people have gotten it to go through on the 3rd or 4th try. Good luck on what you do hate to see you spend 40 dollars on something you can't for free
I tried all of that and nothing works. I have tried flashing farias rom i think over 10 times but i just cant flash it.
do you think there is any way to remove the ipl/spl and extended rom from farias rom so that it is just an OS like NBD 8.0? if thats possible then shelltool should be able to flash it with no problem even on a cid locked device.
my apologies for the bad spelling and punctuation, its 1am. lol
I have been up and down the forums for a few weeks now trying to figure this out. I just got a new tilt from AT&T (replacing another one) and I cannot get any HardSPL version installed on it. I had no problems with my original Tilt installing roms etc.
The Hard SPL install runs through like usual, but when I check the bootloader (camera button reset) it still shows mfg bootloader. I do not get the 'white screen' issue, because everything goes through just fine. I have tried the white screen fix version and no luck.
Any Ideas?
thanks
wgeoff said:
I have been up and down the forums for a few weeks now trying to figure this out. I just got a new tilt from AT&T (replacing another one) and I cannot get any HardSPL version installed on it. I had no problems with my original Tilt installing roms etc.
The Hard SPL install runs through like usual, but when I check the bootloader (camera button reset) it still shows mfg bootloader. I do not get the 'white screen' issue, because everything goes through just fine. I have tried the white screen fix version and no luck.
Any Ideas?
thanks
Click to expand...
Click to collapse
what is the version number of spl in ur bootloader? i know latest att is 3.56
can you give us some info on your tilt. what SPL is on there now? please list all the numbers found when you put your phone into bootloader
KAIS1*0 MFG
SPL-1.0.0liPof
CPLD-8
Added info:
r:1.27.14.09
g:22.45.88.07h
d:1.62.00.00
My main reason for the hard spl is for a radio upgrade that doesnt seem to take even though it says ok. might noe be a hard spl issue? trying to use NEON_Radinly_1.58.25.17_CustomRUU and everything passes but no radio change
wgeoff said:
KAIS1*0 MFG
SPL-1.0.0liPof
CPLD-8
Added info:
r:1.27.14.09
g:22.45.88.07h
d:1.62.00.00
My main reason for the hard spl is for a radio upgrade that doesnt seem to take even though it says ok. might noe be a hard spl issue? trying to use NEON_Radinly_1.58.25.17_CustomRUU and everything passes but no radio change
Click to expand...
Click to collapse
You already have a version of hard spl on the phone. spl 1.0 0liPof is the first version of hardspl. To get another version on you have to use soft spl or jump spl then run it. See the sticky on the new versions of spl. There are detailed instructions there. http://forum.xda-developers.com/showthread.php?t=396922
wgeoff said:
KAIS1*0 MFG
SPL-1.0.0liPof
CPLD-8
Added info:
r:1.27.14.09
g:22.45.88.07h
d:1.62.00.00
My main reason for the hard spl is for a radio upgrade that doesnt seem to take even though it says ok. might noe be a hard spl issue? trying to use NEON_Radinly_1.58.25.17_CustomRUU and everything passes but no radio change
Click to expand...
Click to collapse
you already have hardspl ... see that "spl-1.0.0lipof".. thats it. That neon radio is mainly for diamond builds and works on some of the wm6.1 roms. From the info you provide looks like you have a wm6 rom.. before trying this radio flash a wm6.1 rom and than give the radio a shot.
thesire said:
you already have hardspl ... see that "spl-1.0.0lipof".. thats it. That neon radio is mainly for diamond builds and works on some of the wm6.1 roms. From the info you provide looks like you have a wm6 rom.. before trying this radio flash a wm6.1 rom and than give the radio a shot.
Click to expand...
Click to collapse
you know what they say about great minds
Hey, Im pretty expierenced in flashing htc phones but I cant flash the kaiser for some weird reason. When I use an RUU its stuck at 0% and then gives a connection error. When using the SD method its stuck on loading. I tried flashing hard spl's but its gives the same errors, its funny though that in boot loader it states that I have hard spl 3.56 or at least I think
KAIS*0
SPL-3.56.0000
CPLD-8
Does anyone know how to solve this problem I've been scowering the forums for the past day and cant find anything, anyhelp is much appreciated, Thank you.
P.S: Does anyone know where you can get the tf3d tp2 keyboard and/or actual t3fd tp2 cab?
When the Kaiser goes to the tri-color screen, don't unplug the USB just hold power and camera buttons and press the reset button with the stylus. this should reboot the phone again but this time you will see "USB" in the white section of the tri-color screen.
I believe 3.56 is an AT$T spl, If it was HardSpl bootloader would read 3.56Hard.
Try following mskips tutorial and use jumpspl to install a hardSpl.
yeah, you haven't properly gotten a HSPL on there. SPL 3.56 is stock.
Should read 3.56 Hard or Hard2 if you're using cmonex's version.
Thx alot guys using jump SPL worked perfectly now im running tf3d on a -g- ROM. Thx again.
Does neone know know how to get the sweet tf3d tp2 keyboard by any chance, I downloaded one that stated that was qvga but it was horribly sized.
just to be clear.......did you use jumpspl to flash hard spl or.........did you flash a complete new rom using jumpspl?
I used JumpSPL to flash Hard SPL, then I flashed my -G- ROM. Worked like a charm
I have an old Prophet that refuses to boot to the Operating system. I see the Orange Logo screen with:
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.10.1.22
I don't know if (a long time ago) I flashed a G3 phone with a G4 rom or what (would this be the result????).
I have also tried flashing all sorts of ROMs found on this site and even gone onto WIN 6 but it always halts the booting at this screen...
Can anyone help before this phone ends up in the bin!!!!!!!!!!!!!!
First you must flashed an WM5 Rom. Search for Qtek hier and read so many treads about this prob.
Thanks 4 the reply... I will have a go and see what happens.
I have now re-flashed a Qtec rom and still stuck on the boot screen with...
IPL 2.20.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Is there anyone out there with any idea how to get this phone back from the dead ??????
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
NEO130 said:
You have read the wiki ?
http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
You have download and flashed the qtek rom from this side ?
I don`t mean you do that.
Click to expand...
Click to collapse
I have followed the instructions on this site to recover my M600 but it STILL refuses to boot up....
I have tried various ROMs ect to no avail............
Can anyone out there resolve this ?????
Don`t cry like a little girl. What rom exactly have you flashed now ?
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
Are your battery over 50 % to flash ?
Battery is fully charged and the last ROM flashed was:
RUU_Prophet_220734_2207114_024721_NVID.exe
I have also tried this one:
Original-Shipped-ROMs/OrangeUK/Prophet_Orange_UK_ROM.zip
They both have the same result.
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
NEO130 said:
You start your phone - bring it in the bootloader modus -connect to pc - flashed the qtec rom you have - If this doesn`t go, I am on the end to help, and you are the first guy it doesn`t go. Sorry
P.S. Dissable Active Sync - Flash only with XP, no VISTA. No USB Hub - If you connect the device you must see in the left down corner USB and than flash
Click to expand...
Click to collapse
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
I had a similar Problem, have you tried a other ROM without IPL/SPL
xtrafletch said:
NEO.. I have done this and it will still not boot, maybe it's a hardware problem and it is well and truly "bricked"...
Thanks for your help and replies..... I will keep trying...
Click to expand...
Click to collapse
Hello there,
I think I had a similar Problem, once I flashed some signed roms via
softspl (Neo Shadow 1.0), everything went okay till then.
I forgot the missing HardSPL on one of my Prophets and
Flashed with RUU Bikertibis 6.5 23007 wich worked fine
after flashing. Even with no hardspl it worked till flashing
the next rom...bricked.
Stucking in bootloader and even the Shiped WWE Rom with NVID
was not working. Stucking in the 3 color screen.
My Prophet was sold as TC-500 from german telekom,
so it had spl 2.56.001 wich only allowed Roms signet
by the vendor, also the NVID Rom you tried didn't worked.
but i kept trying and flashed RUU_Prophet_220739_2207119_021921_QTEK_GER_Ship_NO_IPL_SPL.exe
don't know why, but it booted up with this rom.
After this i made a HardSPL and everthing is fine now.
if i read correct you have SPL 2.20.0001 so use G4 RUU.
Try flashing on XP X68! It's easier this way.
I use XP64 wich works to. disable powersaving
and everthing else what could interfer flashing.
good luck !