Related
Hi,
My girlfriend recently bought an XDA Orbit 2 which has WM 6.5 install on it.
Everything else on the phone works perfectly and without issue but she is unable to make phone calls correctly;
The phone will be able to dial out and establish a connection but no sound can be heard by either party even though both phones say the connection is there.
This can be resolved by a hard reset, however this only last for about 10-20 minutes before we lose all sound once again.
Can anyone shed some light onto this for me?
One thing that always screws up phone calls is the radio on the phone it should be a 1.59.xx.xx to check it go to start => setting => system => Phone Information => Software Information. Will find it there also while you are there what 6.5 rom is she running on it as if its not a stable one it may be worth updating it...
Should the .xx.xx be anything in particular or just stay as .xx.xx?
anything in particular i use the stock one (with the default rom) which is .42.15 any should do the job though...
Ok the radio on it is 1.58.25.14 which im asuming is wrong. How do I change it?
This a custom flash thingy ma bob wont hard reset the phone when you flash it => http://forum.xda-developers.com/showthread.php?t=376119
http://forum.xda-developers.com/showthread.php?t=426203
Is the radio i am using and imo the best for signal/ battery life.
How to do it.
1.Download both
2. Put the nbh file in the same directory as the custom ruu
3. Put the phone into bootloader (Start + OK + Reset whole on bottom, hold the buttons until it show a red green white blue screen)
4. plug it in to computer (let the drivers fully install)
5. Start up the Polaris_Custom_ruu.exe
6. Follow the instructions, shouldnt take too long to go through and flash
7. it will reset and you will have a nice shiny new radio and hopefully no more call problems.
All i will say now is what an idiot for selling the phone in that state... (may actually be the reason it was sold lol)
Im going to sound ike a total idiot now but I have no idea what ruu is or nbh or where to put it or what a bootloader is.
Could you possibly put it in moron speech Chris?
LOL well honestly i thought that i had already done that....
Have a look at the files that you download and then it will be explained.
The RUU is the thing that will do the flashing to the device
The nbh files contains the information of you download the stuff and follow the instructions you will have the result that you want honestly i cant think of a simpler way of doing it
Ive also put 2 screenshots to try to help you (one has a different radio but you get the idea...)
Also give this a read but i feel it may confuse you more..
http://forum.xda-developers.com/showthread.php?t=381600
Its a noobs guide to flashing and has all of the info that you need to have.
It does give one point that it has to have SPL-2.20.Olinex on the screen but i would guess this is there as you already have 6.5 on the phone.
Awesome, thanks chris I will get it done tonight after work and let you know how it goes, if it fails I have no doubt I will be back complaining about my lack of phone savvy.
Hey Chris, just to let you know that it worked perfectly, thank you for your help it was much appricated.
No worries glad that it worked as if it didnt then i would be out of ideas...
Hello this is my first post I'm writing because I'm having trouble putting Hard SPL
on my ATT Fuze. I have XP and I connect the phone to the computer and sync it
then open the SPL program go through the prompts then my screen on the phone turns off, the phone I believe also turns off and I get the error 260 a screen pops up on the computer saying it found new hardware. Any help with what I'm doing wrong would be greatly appreciated.Im kind of freaked every time I get up the nerve to do it and think I bricked my phone.
Did you install Microsoft .NET Framework 3.5 first?
Here is the link to follow steps incase you didnt see it.
http://forum.xda-developers.com/showthread.php?t=448008
Hey thanks for your help after further reading I know I should have posted this in the right section and yes I have framework 3.5 installed I guess one question would be that I installed 3.5 to the computer do I install it to the phone? Also I have been reading the hardspl post I think one of the ideas is to first install the SSPL manual
to the phone is that correct? Then do the hard spl? If this is corect what do they mean by install it? run it? active sync? sorry just want to get this right
This is from memory - so if i miss something, sorry!
You shouldn't get any error messages when you connect your phone to the pc, regardless of what boot state the phone is in.
The manual jump SPL is to be used if your phone doesnt enter the correct state automatically from the RRU.
If you want to use the manual jump SPL, do this:
1) Connect your phone to the PC (ensure it can sync correctly - no connection errors)
2) Copy the SSPL_manual to the phone
3) (on the phone) run the SSPL_manual file
3b) Phone should now go to a blank black screen
4) Run the RaphaelHardSPL-Unsigned_190_1_3.exe on the PC
4b) Follow the PC on-screen instructions
**However**
you say that the phone turns black / screen off when you run the exe normally - this is supposed to happen. You shouldnt get an error here. (this screen off part is what the manual SSPL is going to do anyway).
**
If you still get problems, ensure you are connected to the computers USB port - not via a USB hub, take the SD card & sim out the phone. Maybe try a different PC, different USB lead - always make sure you are following the instructions very carefully - and if you still have problems, let us know & we'll try harder! - remember to tell us everything, if you try 2 leads - tell us! If you get something different, tell us what! You can never give too much technical info when asking for technical help - and the more you have tried, the more interested others become (we all like figuring out a problem!)
Beeble
Thank you so much for your help just to give you an update either way I do it
Manual SSPL or just run the Hard SPL by itself the screen goes black and I know
thats what it is supposed to do. Just to clarify at first I did not know the screen was supposed to go black so thanks for that. Again either way it disconnects and a screen comes up saying it found new hardware from that point at first I was scared to do anything else but but eventually I just clicked YES install the hardware hoping that after I did that it would not disconnect but even saying yes to the Found new harware it would say it could not install any hardware and I'm stuck
from there still getting the error
Again I cannot say enough how helpful people have been even if I have not been able to get hard spl on the phone yet
HI guys, I'm hoping you can help me with a problem that's led me to start threatening my galaxy ace (S5830i) with a hammer.
Actually it's not the phone's fault it's purely my own stupidity, but none-the-less I'm here for help because I've spent all day and night trawling the net, trying to figure out how to proceed to resolve my issue on my own but I simply cannot make sense of the conflicting information I'm finding.
I promise you thing thing if nothing else, I have tried my very best to read around a hundred other forums, pages, and how 'to's but I'm finding that I have no resolution that I can work with because either:
- The tutorials turned out to be for the S5830 - not the i model - when I got to the forum
- The youtube videos all seem to be spoken in accents I cannot understand or not explained clearly, or are too technical
- Links I go to to get apk files etc are broken, wrong or leading me up another path I cannot follow
- Software does NOT look on my screen as it does on tutorials or websites (SDK for example)
- The people explaining the resolution type with such poor English I cannot understand what they're actually saying
- The solutions that work for others are too technical or advanced for me to understand and I'm finding it difficult to learn as I go (apart frm the root instructions which I found quite easy)
Anyway, I'll start at the beginning:
I have a samsung galaxy ace (S5830i) running:
- Gingerbread 2.3.6
- Baseband version S5830iXXLK1
- Kernel version 2.6.35.7
- Build number GINGERBREAD.XXLK3
I've already rooted it so I have superuser access, and I managed that perfectly well on my own
I installed titanium backup and somehow I managed to uninstall the stock email that comes with the phone. I think this is my problem because I now cannot download anything from google play, nor can I add a new gmail account to do so, so I'm stuck in no mans land not able to use googleplay (because my gmail account is now missing from my phone) nor can I seem to figure out how to get th apk file directly into the phone so that I can start fresh.
I'm also absolutely stuck on how to flash the phone and start again because nothing I seem to read is explaining it in simple clear terms that a layman can understand. When I do find a simple explanation, I find it's only for the non 'i' version of the phone, or if I find a simple instruction it's zip files for the rom do not contain all the files I need to use with odin v1.5
Also, there are conflicting explanations on flashing the rom on different forums/sites so I dare not use one over the other because another one contradicts it. I do not want to ruin my phone as right now it still basically works for now as a phone.
In my phone menu, the gmail icon is still there, just not the icon/app that said "email". The icon is now missing from my menus and with it there is now no way to use the play services without a gmail account on the phone.
When I click the gmail icon, it stats to open and then just shuts off quickly, not opening gmail, so I'm pretty sure all this is due to me deleting the email app using titanium backup.
Make sense?
What I'd really be grateful for is if on of you guys could help me out and explain in very simple terms what I need to do to either install the apk directly (preferred) so that I can add a gmail account to the phone and get access to google play again, or failing that a simple how to flash the rom with stock gingerbread, together with links to software that's known to be bonafide.
I am literally being driven mad going around in circles on forums and sites to keep going back to square one.
Any help will be very gratefully received. Or I'm afraid this may mean I'm going to smash my new phone int a wall and never use a smartphone again, because obviously I'm too stupid to play around with them on my own.
I really appreciate your help if someone would be able to invest a little time here.
Thanks very much for your time, guys
Jobeeey
additional info
Right, these are the instructions I found on this forum, but I'm unclear if I'm approaching this right..
Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.85.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!
Click to expand...
Click to collapse
I've found a rom (which is a single file) and if I'm reading this right I place that in the PDA section of Odin after installing the usb drivers onto my pc (done that and windows recognizes my phone in the sense that it isn't now hassling me for drivers every two seconds).
Ok.. so I seem to have got the correct rom for my specific ace model.. and the instructions seem to be that I now:
1) Connect usb cable
2) Boot my phone into download mode (I can do that I think).. but at what point do I press vol down to download a new os.. before or after pressing start in Odin?
3) Open Odin and add file as in my attached screenshot (I can do that)
4) Click 'start' in Odin
5) Wait for my phone to reboot
And that should be job done, the phone should be flashed with the stock rom again and that should get me back on track, right? Or am I about to screw up my phone and ruin it even further?
Thanks for reading. I hope someone can advise if I'm doing this right as I've seen other forums say that I should tick the 'Re-partition' box, and other that say I shouldn't, and this one says nothing about it at all.
This is one of the tings that's confusing me, and once I'm now flashing a phone for the first time it's flippin scary to do it on my lonesome!
This is what I mean..
I've just tested going into download mode with odin ready, and the phone gets there (vol up+down + power on).. but each time it gets into download mode it seems to disconnect from odin and no com port is open. I get the windows device disconnected/connected beeping and the connection seems to sever.
What the Fffff...
This is exactly what I'm talking about.. nothing seems to be working like it's meant to be and I'm getting nowhere with any instructions I can find after god knows how many hours researching this.
:crying:
update (lol)
Mornin all,
So, just in case anyone finds this useful..
The flashing problem is kind of irrelevant now because:
A) Odin (tried several versions) simply will not stay connected to my phone when it boots into download mode, and having checked many tutorials for this it sees that this is a problem some of us cannot get past.
Anyway, one of the methods to resolve this was to wipe the cache and clear all data etc, which I did, and now my phone is stuck on the "pres the android" screen, and my phone will no longer get past that. Tried pressing clockwise in all four corners but still nothing.
No probs.. so we move on to a new step of trying to split the roms via cygwin, but guess what? Every single time I try to download the cygwin files, that freezes at about 98% and will not download, no matter which mirror I select.
So, this is what I call a curse that isn't going to be lifted by me no matter hat. It's not not meant to be.
Therefore, what I'm going to do is take it to a local shop that unlocks mobiles and give it to them to flash back to stock rom for me.
If that doesn't work, do you know what I'm gonna do?
Nothing. Because there's nothing you can do when the processes do not follow the same progress as they do in the tutorials.
I hope other novice S5830i users save themselves all his time and trouble and don't bother following the same process and become locked out of their phone at the touch android screen.
Update
Yipee,
Right, I stumbled across a solution that worked for me.
What I did was get my 2gb msd card that came with the phone and slapped MindCR v1.0.12 on the card and whacked that in my phone (this bypassed not being able to get a new rom on the sd card as it wasn't unmounted before the crash, so my pc wouldn't recognise the date to put it on via the pc).
Then I updated the rom from that 2gb card (vol up + menu + power to get into recovery mode) and it took it a few minutes to update the firmware and give me back the full use of my phone, and with a shiny new os on it. Whoop!
I didn't bother with CWM as I'd forgotten to add it before flashing, but it worked none-the-less and I'm now back in business (wiped it manually).
As it turned out this version of MindCR works really well so far as I can tell. I realise there are updated roms now but I've come to the conclusion after the scare I had that if you're not entirely sure what you're doing, it's best to leave it alone if it ain't broke.
SO.. now I have a phone with what seems to be a better os than the stock and less bloatware on it, no phone problems I can see after thorough testing... and from what I can tell it turned out to be better than it was before the disaster.
And I learned a bit in the process. Like for example, don't feck around removing apps from smartphones with titanium unless you've backed them up and you're prepared to stress out for over 20hrs wondering what to do about it.
And, also, don't expect much help from a forum because you may not always get it. << That' not a dig at xda by the way. It's just a BIG forum so your threads may not be seen by the right person before they get buried in past pages.
Hope my little journey helps another unsuspecting S5830i user who comes across the thread.
Hello,
I'm sorry to bother you with an apparently repetitive thread, but I assure it is not.
I've been dealing with this problem for over a year now. Of course there were times that I simply gave up, but every now and then I searched all over the internet (seriously; very resilient, I am) and tried everything. Nothing seems to work.
The issue is: one day I was reading something on Google Reader and the tablet restarted. When it came back, it was in this password screen.
[AS A NEW USER I COULDN'T POST THE IMAGE - please see attachment ending in 41]
Detail: I had never, EVER set any kind of password. I don't do this with any of my devices unless I'm obliged to (as in Windows 8, this big piece of shiite).
So the thing is: I did not set a password, I did not choose to ask for a password in any situation and there isn't a single combination that I haven't tried. The thing doesn't even ask me to stop -- like 'hey, you've tried your 30k input, I think you should stop now'.
Now, for you not to start cursing me, I tried EVERYTHING that is basic and post-basic to fix it. I did wipe the data, I tried flashing another ROM, I did cold boot, factory reset, EasyFlashed, nvflashtf and whatnot. I swear to GoogleGods that I, as a non-expert-but-very-keen-on-technology, could.
Another thing that happens is when I try to enter the recovery mode, after using the nvflash, it doesn't work. The image that appears to me is this one:
[SAME THING -- attachment ending in 38]
Again: I'm not a complete noob. I know how to get into things; all I need is a simple guidance. I'm really sorry if this has been posted before and only I couldn't find it, but I won't be so if someone helps me to get it and solve my problem. I can't stand this anymore -- now it's just a matter of pride.
Thank you all.
This happened to me on my SL101 after I flashed a ROM of some sort. I used ADB commands to push the stock ROM back to it and to push another Recovery to it. Mine was in worse shape, Recovery loop, and then I finally got it to where yours currently is. My physical nor on screen keyboard would even work. Look up some ADB commands, perhaps you already know them, and attempt to either push the stock ROM or a new Recovery blob back to it.
D
DatDude123 said:
Look up some ADB commands, perhaps you already know them, and attempt to either push the stock ROM or a new Recovery blob back to it.
D
Click to expand...
Click to collapse
Yeah, well, y'know, I'm not at this level yet, but I'll dig into ADB and stuff.
I tried to use this sometime in the past, but my computer was so bad back then that I had to give up to keep my sanity. Now I've got a fairly good one (very good, considering the few things I use it for), however much less time.
Tonight is the night, though. I'll study as much as I can and I'll fix this ****. Any tip you may remember now would be useful.
Thanks.
I'm struggling with something even before I start: there's no way I can get access to the system and turn the USB Debugging on.
I know I'm not getting much attention, but I won't give up. Please just do not accuse me of spamming; I'm just a desperate geek that has been kept away from his toy.
Alright, after the childish speech, here's the latest update: I cannot use de ADB thing because there's no way I can turn on the USB debugging mode.
Or is there? The latest news is that I can get access to some system files through the ASUS File Manager (turns out it still reads the MicroSD Card, even though I could not update the device this way). So, technicians, is there a way to hack into this beast? Fu ck, I don't even know how to call it anymore.
There isn't much I can do with this File Manager. Mostly visualize the folders and rename this and that (which is the only thing I reckon might be useful).
Jesus, I'm sleepy, I can't even write properly anymore. Please someone help me. It can't be that hard.
maycondimas said:
I know I'm not getting much attention, but I won't give up. Please just do not accuse me of spamming; I'm just a desperate geek that has been kept away from his toy.
Alright, after the childish speech, here's the latest update: I cannot use de ADB thing because there's no way I can turn on the USB debugging mode.
Or is there? The latest news is that I can get access to some system files through the ASUS File Manager (turns out it still reads the MicroSD Card, even though I could not update the device this way). So, technicians, is there a way to hack into this beast? Fu ck, I don't even know how to call it anymore.
There isn't much I can do with this File Manager. Mostly visualize the folders and rename this and that (which is the only thing I reckon might be useful).
Jesus, I'm sleepy, I can't even write properly anymore. Please someone help me. It can't be that hard.
Click to expand...
Click to collapse
For some reason i thought you were on th sl101(slider) so i didnt comment. So heres the deal, any fix is going to be data destructive(nothing you can do at this point as even if you manage to pull data from the tablet, it will be encripted) You need Easyflasher(dev section) follow the instructios there (basically donwloading stock firmware from asus and by using nvflash in apx mode it will re-partition storage, and upload the stock firmware to the tf101)
If you hit any problems, post them here and ill help you further
Edit: just read you post more, if you tried easyflaher and it didnt work, please post the details of what you tried within easyflasher.
Its a strange issue, if it happend to me and id tried the things you already have, this is what id try:
-Flashing ubuntu from the dev section(i known very little about how nvflash works but it maybe only re-partitioning certain partitions, ubuntu i would imagine would require a full re-partitioning)
-alternativly (or on top of the previous idea) use one of the ubuntu installers(OLiFE on ubuntu worked the best for me, but franks tools/ newer software based on franks tools should work fine) and flash the Prime! rom on its own.
If these dont work, your last resort is asus - but thats a long shot lol
maycondimas said:
I know I'm not getting much attention, but I won't give up. Please just do not accuse me of spamming; I'm just a desperate geek that has been kept away from his toy.
Alright, after the childish speech, here's the latest update: I cannot use de ADB thing because there's no way I can turn on the USB debugging mode.
Or is there? The latest news is that I can get access to some system files through the ASUS File Manager (turns out it still reads the MicroSD Card, even though I could not update the device this way). So, technicians, is there a way to hack into this beast? Fu ck, I don't even know how to call it anymore.
There isn't much I can do with this File Manager. Mostly visualize the folders and rename this and that (which is the only thing I reckon might be useful).
Jesus, I'm sleepy, I can't even write properly anymore. Please someone help me. It can't be that hard.
Click to expand...
Click to collapse
If you can't get into anything, but you can enter APX Mode, but NVFlash doesn't work, then I'm not sure anything will as NVFlash completey deletes and recreates all the partitions on the drive
So unless you have been unlucky and downloaded a bad version of an NVFlash ROM....
I know you say you have used NVFlash but I`ll stick this here anyway
The way I restore is:
Connect tablet to PC and make sure the tablet is turned off (Make sure it is the only USB device connected other than keyboard/mouse)
Hold Volume Up + Power for a few seconds until you hear the USB connect sound on the PC, release the buttons, you are in APX mode
Install APX drivers if you have not already
Now extract this
http://www.xdafileserver.nl/Files/Asus/Asus%20Transformer%20(TF101)/STOCK%20ROMS/ICS%20.27/NVFLASH_ICS_9.2.1.27_WW_NOROOT.7z
And run "download.bat"
I think you should see some text appear on the tablet screen, and progress will be shown in the command prompt window on the PC
Wait for it to complete 100%
Its been a while so I can't remember if the tablet will reboot on its own or if you need to hold power for 30 seconds to get out of APX mode
Either way, make sure it is completely finished and reboot the tablet
Only thing I can remember going wrong with NVFlash was the first time I rebooted after a sucessful boot, it would hang on a black screen
Just hold power for 30 seconds and then power on normally, done, if it has worked you have your tablet back, if not, I think its a hardware issue > see asus
Im very keen to get this fixed/ find the issue as uptil now I thought the tf101 was virtually software invincible, you need to pay attention to what the nvflash process says, the one thing I can think of as to why nvflash didn't work is it can't write over encrypted partitions although that would make no sense why it wouldn't.
Just a suggestion... make sure you're not docked. Some people report issues when nvflashing while docked (I can't replicate those issues except with the Tubuntu tool).
Is there a solution?
I also have an error! see picture
First things first This Forum has a LOT of different places to post so if this is in the wrong place please dont yell at me, just kindly assist me in moving it to the appropriate location. I think once we get this solved it might be a huge step for the Android community.
OK So long story short G2's digitizer is dead, glass shattered, i can still see the screen and i'm getting a USB OTG cable tomorrow, that will make all of this completely null and void(maybe wednesday). (ALSO Caps is being used for things i think are important, i'm going to be posting this in a few places so i need it to be universal, i hope you all understand)
BUT i still want to try my damndest to get into this phone and backup files, JUST BECAUSE I BELIEVE I SHOULD BE ALLOWED TO.(or at the very least "able")
So for those as adventurous as i am, I'd like to hear any suggestions on how to get access to the device (MOUNT STORAGE) in its current state. Details below:
-Sprint ls980
-Digitizer is shattered
-lcd is completely fine
-all buttons work (theres only three lol)
-i have sound and vibration
-wireless storage is off(turned it off right before it fell from my hands to the douchebag floor below)
-USB DEBUGGING(although i distinctly remember enabling it many times) Is NOT ON. (Or at least adb will not recognize the device.)
-adb WILL recognize the device in SIDELOAD MODE
-no custom recovery
-no custom roms
-literally purely stock
-And of course USB Connection is set to CHARGE ONLY(i didnt do this, but apparently it remembers your LAST choice and uses that as default, stupid lg, why let me chose the option to "ask every time", if you're going to default to my last choice anyway?)
Now i really just want to access my pictures(there's a pic of my mom that i took and she REALLY wants it and bugs me daily about it)(You can blame the G2's amazing camera)
Now here's what i HAVE TRIED:
-ADB
-moborobo sp? (some program)(and a few others like it)
-android control
-fastboot
-download mode
-tried making my own OTG cable....failed miserably (i'd upload a pic...but yea...)
-adb via wifi
-tried flashing a custom recovery, but USB debugging wasnt enabled so it failed
-_-
-had the idea of using chrome Remote desktop, but i cant connect to it in its current state lol
-thought about bluetooth, but my lame laptop doesnt have bluetooth (i'd be willing to explore this option tho, sounds fun)
-nothing "illegal"......yet.....totally kidding, i want to be able to do this as legally as possible
So brothers and sisters, does anyone have any options they'd like to try out?
If we try anything CRAZY is there a way to force the phone to make a backup?
Is there a way to disassemble the phone and connect it straight to the onboard storage?
i'm just throwing ideas out there.
Thanks in advance!!
and yes i'm a new poster, but i've been lurking on these forums since 2010
And i'll add this, because i know someone is thinking it right now, "Why didnt you root your g2?" Simple answer is this:
I wanted to experience Android in its most Basic state, Getting people to move from any other platform to Android is not easy, When you show them your modded out custom g2 it scares them, but the second they see my phone completely stock and realize how great Android is they start regretting their iPhone purchase or even heir midrange Android purchase. My [email protected] and Nexus 7 in their "Vanila" state have Wowed many people and converted longtime iphone users. Solving this problem would only aid in that effort.
Thanks again guys.
Is there a way to move this to the Developers forum? i'm sure they've got some ideas