Database Info

[Q] need help with UnBrickableResurrectorR40

I need some help. I will set up the scenario first. My Cap has had the unbrickmod performed on it about 8 months ago. I had the battery fall out ib the middle of a flash. I was getting the phone /computer "you screwed up a firmware install" animation. I tried to get it cleared up with Odin and now it is black screen no matter what I try. Can't get download, or recovery, and the usb jig won't even get it into download. I am completely unschooled and self taught with pc and phones and I think I have done pretty well. Now, I have taken another big step and after reading up on what to do next, I installed successfully, Ubuntu in my laptop (xp pro)and I can dual o.s. or boot either o.s. individually and everything seems to work fine. I downloaded UnBrickResrectR40, HIBL.zip, and java jre7.0.5. Ihave no clue about Linux or command lines,but after reading a million different claims on how to install these files i was finally able to get the java installed. But, I can't get the unbrickres file to install. I always get an error saying file not found by regex. Now I have copies in downloads,desktop, home, files, and have changed permissions and types(jar,javaw.exe,zip.gz) and still nothing. No forums or help pages help. They all give directions as if you know what you are doing already. They must figure if you got this far you are a tech or a dev, not a noob electrician who can't even type. I need some seriously slow,detailed,step by step,hand holding through this one, if someone has the patience. Back to the phone. The only thing that shows any life in the phone at all is when it is plugged into my laptop. It doesn't show up anywhere but under device manager. It shows under "universal serial bus devices" as, SEC S5PC 110 Test B/D , location 0,device is working properly,driver provider-libusb.org, driver date-7-13-2009,driver version-6.7.7600.16385, not digitally signed. That is it. I need some direction. What do I do now? Hopefully someone feels adventurous.Thanks

khkaiser13 said:
I need some help. I will set up the scenario first. My Cap has had the unbrickmod performed on it about 8 months ago. I had the battery fall out ib the middle of a flash. I was getting the phone /computer "you screwed up a firmware install" animation. I tried to get it cleared up with Odin and now it is black screen no matter what I try. Can't get download, or recovery, and the usb jig won't even get it into download. I am completely unschooled and self taught with pc and phones and I think I have done pretty well. Now, I have taken another big step and after reading up on what to do next, I installed successfully, Ubuntu in my laptop (xp pro)and I can dual o.s. or boot either o.s. individually and everything seems to work fine. I downloaded UnBrickResrectR40, HIBL.zip, and java jre7.0.5. Ihave no clue about Linux or command lines,but after reading a million different claims on how to install these files i was finally able to get the java installed. But, I can't get the unbrickres file to install. I always get an error saying file not found by regex. Now I have copies in downloads,desktop, home, files, and have changed permissions and types(jar,javaw.exe,zip.gz) and still nothing. No forums or help pages help. They all give directions as if you know what you are doing already. They must figure if you got this far you are a tech or a dev, not a noob electrician who can't even type. I need some seriously slow,detailed,step by step,hand holding through this one, if someone has the patience. Back to the phone. The only thing that shows any life in the phone at all is when it is plugged into my laptop. It doesn't show up anywhere but under device manager. It shows under "universal serial bus devices" as, SEC S5PC 110 Test B/D , location 0,device is working properly,driver provider-libusb.org, driver date-7-13-2009,driver version-6.7.7600.16385, not digitally signed. That is it. I need some direction. What do I do now? Hopefully someone feels adventurous.Thanks
Click to expand...
Click to collapse
Have you tried the Windows tool Windows32DriversAndCommandLineApp.zip ?
http://forum.xda-developers.com/showthread.php?t=1242466

Thanks for the advice
Thanks Silvertag, I appreciate the fact that you even read my post. I was running late for work, but wanted to get something on the boards.
I will check out the link you suggested. Much appreciated.

[Q] Galaxy Ace (S5830i) headache with stock email deletion

HI guys, I'm hoping you can help me with a problem that's led me to start threatening my galaxy ace (S5830i) with a hammer.
Actually it's not the phone's fault it's purely my own stupidity, but none-the-less I'm here for help because I've spent all day and night trawling the net, trying to figure out how to proceed to resolve my issue on my own but I simply cannot make sense of the conflicting information I'm finding.
I promise you thing thing if nothing else, I have tried my very best to read around a hundred other forums, pages, and how 'to's but I'm finding that I have no resolution that I can work with because either:
- The tutorials turned out to be for the S5830 - not the i model - when I got to the forum
- The youtube videos all seem to be spoken in accents I cannot understand or not explained clearly, or are too technical
- Links I go to to get apk files etc are broken, wrong or leading me up another path I cannot follow
- Software does NOT look on my screen as it does on tutorials or websites (SDK for example)
- The people explaining the resolution type with such poor English I cannot understand what they're actually saying
- The solutions that work for others are too technical or advanced for me to understand and I'm finding it difficult to learn as I go (apart frm the root instructions which I found quite easy)
Anyway, I'll start at the beginning:
I have a samsung galaxy ace (S5830i) running:
- Gingerbread 2.3.6
- Baseband version S5830iXXLK1
- Kernel version 2.6.35.7
- Build number GINGERBREAD.XXLK3
I've already rooted it so I have superuser access, and I managed that perfectly well on my own
I installed titanium backup and somehow I managed to uninstall the stock email that comes with the phone. I think this is my problem because I now cannot download anything from google play, nor can I add a new gmail account to do so, so I'm stuck in no mans land not able to use googleplay (because my gmail account is now missing from my phone) nor can I seem to figure out how to get th apk file directly into the phone so that I can start fresh.
I'm also absolutely stuck on how to flash the phone and start again because nothing I seem to read is explaining it in simple clear terms that a layman can understand. When I do find a simple explanation, I find it's only for the non 'i' version of the phone, or if I find a simple instruction it's zip files for the rom do not contain all the files I need to use with odin v1.5
Also, there are conflicting explanations on flashing the rom on different forums/sites so I dare not use one over the other because another one contradicts it. I do not want to ruin my phone as right now it still basically works for now as a phone.
In my phone menu, the gmail icon is still there, just not the icon/app that said "email". The icon is now missing from my menus and with it there is now no way to use the play services without a gmail account on the phone.
When I click the gmail icon, it stats to open and then just shuts off quickly, not opening gmail, so I'm pretty sure all this is due to me deleting the email app using titanium backup.
Make sense?
What I'd really be grateful for is if on of you guys could help me out and explain in very simple terms what I need to do to either install the apk directly (preferred) so that I can add a gmail account to the phone and get access to google play again, or failing that a simple how to flash the rom with stock gingerbread, together with links to software that's known to be bonafide.
I am literally being driven mad going around in circles on forums and sites to keep going back to square one.
Any help will be very gratefully received. Or I'm afraid this may mean I'm going to smash my new phone int a wall and never use a smartphone again, because obviously I'm too stupid to play around with them on my own.
I really appreciate your help if someone would be able to invest a little time here.
Thanks very much for your time, guys
Jobeeey

additional info
Right, these are the instructions I found on this forum, but I'm unclear if I'm approaching this right..
Flashing s5830i with Odin v1.85
1.Turn off the phone and put it in Download mode by pressing Power+Volume Up+volume down.
2.Open Odin v1.85.Run as Administrator!.
3.Put the files in Odin and don't touch the settings
4.If it's a one-file firmware put it in PDA section.
If it's multiple put the files in the correct section.
5.Click start and don't touch the phone!Don't turn off computer and don't unplug the phone!It will reboot automatically and the first boot will take some time,so don't panic!
Click to expand...
Click to collapse
I've found a rom (which is a single file) and if I'm reading this right I place that in the PDA section of Odin after installing the usb drivers onto my pc (done that and windows recognizes my phone in the sense that it isn't now hassling me for drivers every two seconds).
Ok.. so I seem to have got the correct rom for my specific ace model.. and the instructions seem to be that I now:
1) Connect usb cable
2) Boot my phone into download mode (I can do that I think).. but at what point do I press vol down to download a new os.. before or after pressing start in Odin?
3) Open Odin and add file as in my attached screenshot (I can do that)
4) Click 'start' in Odin
5) Wait for my phone to reboot
And that should be job done, the phone should be flashed with the stock rom again and that should get me back on track, right? Or am I about to screw up my phone and ruin it even further?
Thanks for reading. I hope someone can advise if I'm doing this right as I've seen other forums say that I should tick the 'Re-partition' box, and other that say I shouldn't, and this one says nothing about it at all.
This is one of the tings that's confusing me, and once I'm now flashing a phone for the first time it's flippin scary to do it on my lonesome!

This is what I mean..
I've just tested going into download mode with odin ready, and the phone gets there (vol up+down + power on).. but each time it gets into download mode it seems to disconnect from odin and no com port is open. I get the windows device disconnected/connected beeping and the connection seems to sever.
What the Fffff...
This is exactly what I'm talking about.. nothing seems to be working like it's meant to be and I'm getting nowhere with any instructions I can find after god knows how many hours researching this.
:crying:

update (lol)
Mornin all,
So, just in case anyone finds this useful..
The flashing problem is kind of irrelevant now because:
A) Odin (tried several versions) simply will not stay connected to my phone when it boots into download mode, and having checked many tutorials for this it sees that this is a problem some of us cannot get past.
Anyway, one of the methods to resolve this was to wipe the cache and clear all data etc, which I did, and now my phone is stuck on the "pres the android" screen, and my phone will no longer get past that. Tried pressing clockwise in all four corners but still nothing.
No probs.. so we move on to a new step of trying to split the roms via cygwin, but guess what? Every single time I try to download the cygwin files, that freezes at about 98% and will not download, no matter which mirror I select.
So, this is what I call a curse that isn't going to be lifted by me no matter hat. It's not not meant to be.
Therefore, what I'm going to do is take it to a local shop that unlocks mobiles and give it to them to flash back to stock rom for me.
If that doesn't work, do you know what I'm gonna do?
Nothing. Because there's nothing you can do when the processes do not follow the same progress as they do in the tutorials.
I hope other novice S5830i users save themselves all his time and trouble and don't bother following the same process and become locked out of their phone at the touch android screen.

Update
Yipee,
Right, I stumbled across a solution that worked for me.
What I did was get my 2gb msd card that came with the phone and slapped MindCR v1.0.12 on the card and whacked that in my phone (this bypassed not being able to get a new rom on the sd card as it wasn't unmounted before the crash, so my pc wouldn't recognise the date to put it on via the pc).
Then I updated the rom from that 2gb card (vol up + menu + power to get into recovery mode) and it took it a few minutes to update the firmware and give me back the full use of my phone, and with a shiny new os on it. Whoop!
I didn't bother with CWM as I'd forgotten to add it before flashing, but it worked none-the-less and I'm now back in business (wiped it manually).
As it turned out this version of MindCR works really well so far as I can tell. I realise there are updated roms now but I've come to the conclusion after the scare I had that if you're not entirely sure what you're doing, it's best to leave it alone if it ain't broke.
SO.. now I have a phone with what seems to be a better os than the stock and less bloatware on it, no phone problems I can see after thorough testing... and from what I can tell it turned out to be better than it was before the disaster.
And I learned a bit in the process. Like for example, don't feck around removing apps from smartphones with titanium unless you've backed them up and you're prepared to stress out for over 20hrs wondering what to do about it.
And, also, don't expect much help from a forum because you may not always get it. << That' not a dig at xda by the way. It's just a BIG forum so your threads may not be seen by the right person before they get buried in past pages.
Hope my little journey helps another unsuspecting S5830i user who comes across the thread.

Stock TF700 boot loop, can't turn off device.

Back in June, I turned on my TF700 with the dock attached, it started as usual.. I turned on my wifi, opened up my browser to look up plane tickets, then it restarted. I didn't think much of it, and when it loaded up again, I tried to look up tickets again, and it did the same thing. I gave up, closed it and zipped it up in my sleeve. It was a few hours before I got home, and when I took it out of the sleeve, it was quite warm! It was constantly rebooting and there was no way to turn if off. I left it out of the sleeve and let the battery die. I didn't use my tablet for a few days, and when I went to turn it on again, the same thing happened, and has been happening ever since. I have tried to start the tablet while connected to the dock, the wall charger, without the dock, with wifi on, with wifi off, etc. The tablet gets to the lock screen, I unlock it, and I only have about 10 seconds before it freezes and restarts. I am unable to turn off the device, because when I choose "shut down" from the menu, it shows that it's in the process of slowing down, but then the spinning wheel freezes and it vibrates and restarts before it can fully shut itself off. Since I can boot into android, I thought it was something that the tablet is trying to run upon startup that was causing problems. I was able to quickly get to settings and apps, to uninstall several apps, but nothing has helped. I used to have a task manager widget on the home screen, and uninstalled that too.
After doing research into the problem, I found that most people who have boot loop issues or constant restarting, are rooted and are experiencing difficulties with a new ROM. I am 100% stock. I have held down power and volume down. It gives me RCK, Android and Wipe. I have tried cold booting into android, but the same restart loop after 10 seconds occurs. I thought it might have been a bad firmware update that went through unbeknownst to me. So I downloaded the firmware file from ASUS, renamed and flashed it sucessfully. However, no change in the reboot problem. I am running the following version: US-epad-10.6.1.14.8-20130514. I know there's a new version out, but wasn't sure if I should try to flash that yet.
I am willing to try absolutely anything to fix the problem, with the EXCEPTION of wiping data. I know that would be the easy way to go, but I have photos and videos from my best friend's engagement and they are the only copies. If I am able to get my tablet to be stable enough to copy those off, I would then be willing to wipe and have a fresh start. I have tried connecting my tablet to my computer, and it is recognized. After it boots up and I unlock it, then the tablet begins to mount (I'm on windows 8). However, I still only have 10 seconds or so before the tablet restarts, and that's not enough time to even view the folders from the tablet.
It's been 3 months since this started, and I have done lots of research and tried lots of things, but nothing has helped yet. Since I haven't delved too deeply into the dev side of android (I've only rooted my S3) there is lots of android speak that I don't understand fully, or have experience with, like ADB. If someone is willing to offer suggestions on what to try, I am very good at following directions! Thank you for any help or leads you can offer.

Wow - you're in a difficult situation...
You being on stock I can only imagine the bootloop is caused by something you installed.
So if you can access settings and are able to uninstall apps, just keep doing it until you are back to the original stock setup.
Are you sure the files you are trying to save are still on the SD card? Don't know how you flashed 10.6.1.14.8, but flashing a complete firmware package ususally erases /data - although your persisiting bootloop indicates it didn't...... if the bootloop is caused by an app. And I can't imagine what else would cause it.
You could try to do a factory reset in Backup&Restore but you will loose the contents of your /data partition...
You can flash the 10.6.1.14.10 firmware file, but most likely you will also loose your data.
The only way I can think of to replace your bootloader and firmware without data loss is if you try to find a copy of the 10.6.1.14.10 dlpkgfile. That is the OTA update file Asus pushes out to users. It's a patch file, meaning it only replaces/updates new files and leaves everything else alone.
If you find the dlpkgfile on some forum you would have to place it into your /cache directory and reboot - and I don't know if you can copy it to your tablet before it bootloops again.
Unfortunately the reason for your bootloop is probably an app on the same partiton with the data you don't want to loose. Unless you manage to uninstall the culprit I don't see much hope....
Good luck!
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4

Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.

_that6042401 said:
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
Click to expand...
Click to collapse
He's bootlooping..... How does he go into settings and turn on USB debugging?
I think the best option maybe to flash a stock Asus ROM from their site but that will wipe all data including those photos......

zanadoo22 said:
Back in June, I turned on my TF700 with the dock attached, it started as usual.. I turned on my wifi, opened up my browser to look up plane tickets, then it restarted. I didn't think much of it, and when it loaded up again, I tried to look up tickets again, and it did the same thing. I gave up, closed it and zipped it up in my sleeve. It was a few hours before I got home, and when I took it out of the sleeve, it was quite warm! It was constantly rebooting and there was no way to turn if off. I left it out of the sleeve and let the battery die. I didn't use my tablet for a few days, and when I went to turn it on again, the same thing happened, and has been happening ever since. I have tried to start the tablet while connected to the dock, the wall charger, without the dock, with wifi on, with wifi off, etc. The tablet gets to the lock screen, I unlock it, and I only have about 10 seconds before it freezes and restarts. I am unable to turn off the device, because when I choose "shut down" from the menu, it shows that it's in the process of slowing down, but then the spinning wheel freezes and it vibrates and restarts before it can fully shut itself off. Since I can boot into android, I thought it was something that the tablet is trying to run upon startup that was causing problems. I was able to quickly get to settings and apps, to uninstall several apps, but nothing has helped. I used to have a task manager widget on the home screen, and uninstalled that too.
After doing research into the problem, I found that most people who have boot loop issues or constant restarting, are rooted and are experiencing difficulties with a new ROM. I am 100% stock. I have held down power and volume down. It gives me RCK, Android and Wipe. I have tried cold booting into android, but the same restart loop after 10 seconds occurs. I thought it might have been a bad firmware update that went through unbeknownst to me. So I downloaded the firmware file from ASUS, renamed and flashed it sucessfully. However, no change in the reboot problem. I am running the following version: US-epad-10.6.1.14.8-20130514. I know there's a new version out, but wasn't sure if I should try to flash that yet.
I am willing to try absolutely anything to fix the problem, with the EXCEPTION of wiping data. I know that would be the easy way to go, but I have photos and videos from my best friend's engagement and they are the only copies. If I am able to get my tablet to be stable enough to copy those off, I would then be willing to wipe and have a fresh start. I have tried connecting my tablet to my computer, and it is recognized. After it boots up and I unlock it, then the tablet begins to mount (I'm on windows 8). However, I still only have 10 seconds or so before the tablet restarts, and that's not enough time to even view the folders from the tablet.
It's been 3 months since this started, and I have done lots of research and tried lots of things, but nothing has helped yet. Since I haven't delved too deeply into the dev side of android (I've only rooted my S3) there is lots of android speak that I don't understand fully, or have experience with, like ADB. If someone is willing to offer suggestions on what to try, I am very good at following directions! Thank you for any help or leads you can offer.
Click to expand...
Click to collapse
I have not use this method but you could try.
You need a boot OS tool on your external sd and run it from your external sd so you can access to your internal sd to copy files from there. You can search on the internet and you should find more information on how to use them depending on what boot os you are using.. Good luck.

zanadoo22 said:
and I only have about 10 seconds before it freezes and restarts.
Click to expand...
Click to collapse
sbdags said:
He's bootlooping..... How does he go into settings and turn on USB debugging?
Click to expand...
Click to collapse
Preferably FAST.
---------- Post added at 07:51 PM ---------- Previous post was at 07:51 PM ----------
LetMeKnow said:
You need a boot OS tool on your external sd
Click to expand...
Click to collapse
What is a boot OS tool?

_that said:
Try getting adb access, this should allow us to diagnose the problem you are experiencing.
Tablet side: go to settings, developer options (if it is not visible, tap the build number 7 times), enable USB debugging
Computer side: no idea, they say Windows 8 is a bit tricky to get the drivers installed correctly.
When you have adb running, do "adb pull /proc/last_kmsg" and post the downloaded file - it should contain valuable info about your reboots.
Click to expand...
Click to collapse
I was actually able to get usb debugging turned on. It took me quite a few tries, but I did it!
I've never used adb, but here's what I've done so far.. I downloaded the Android SDK and ASUS Pad PC Suite (which contains Asus Sync).
I was able to use the command prompt to navigate to the platform-tools folder and open adb, however when I type in adb devices, it doesn't recognize my device. What steps to do I take from here to be able to use adb to see my device, so I can pull the file to diagnose what's going on? How do I know if I have the right drivers installed so my computer can see my tablet? All I did was install the asus suite. Do I need to do anything further on that end?

zanadoo22 said:
I was actually able to get usb debugging turned on. It took me quite a few tries, but I did it!
I've never used adb, but here's what I've done so far.. I downloaded the Android SDK and ASUS Pad PC Suite (which contains Asus Sync).
I was able to use the command prompt to navigate to the platform-tools folder and open adb, however when I type in adb devices, it doesn't recognize my device. What steps to do I take from here to be able to use adb to see my device, so I can pull the file to diagnose what's going on? How do I know if I have the right drivers installed so my computer can see my tablet? All I did was install the asus suite. Do I need to do anything further on that end?
Click to expand...
Click to collapse
What Windows version do you have on your PC?
You can check your drivers in Device Manager. Open it, look for your tablet under Portable Devices and check if the driver has a yellow exclamation mark next to it. You should be able to update/install/uninstall the driver from here.
Try to find out if there is a setting in your Windows version to only allow Microsoft signed drivers and disable it.
Sent from my DROID4 using Tapatalk 2

Portable ADB ALL [ANDROID] devices

Have you ever needed to use ADB at a work PC or a location you could not "install" applications?
Unzip the attached file and click the RunMe.bat
I have tested this pulling logs, pushing/pulling files, flashing recovery, roms, and anything else I could think of.
I tested it on the M8 stock rom 5.0.2 but this is a generic file so it should be fine on most if not all android devices.
The idea came when I was at work and looking for a solution for a problem I had. I could not install anything on my work PC, so this came in handy, the only problem is that it was outdated, or seemed outdated for my needs.
find the zip file here https://www.androidfilehost.com/?fid=24052804347791558
This topic has been covered but is very outdated. I only found information from 2011 and 2013. The included information has since been updated by Google. I found it and included it, re-zipped it and now it is here for you to enjoy.
Thanks
to @Kickface, (where I first found this solution) wherever you went and any others who have created a truly portable (not minimal) solution to using ADB without installing anything.

dopy25 said:
Have you ever needed to use ADB at a work PC or a location you could not "install" applications?
Unzip the attached file and click the RunMe.bat
I have tested this pulling logs, pushing/pulling files, flashing recovery, roms, and anything else I could think of.
I tested it on the M8 stock rom 5.0.2 but this is a generic file so it should be fine on most if not all android devices.
The idea came when I was at work and looking for a solution for a problem I had. I could not install anything on my work PC, so this came in handy, the only problem is that it was outdated, or seemed outdated for my needs.
find the zip file here https://www.androidfilehost.com/?fid=24052804347791558
This topic has been covered but is very outdated. I only found information from 2011 and 2013. The included information has since been updated by Google. I found it and included it, re-zipped it and now it is here for you to enjoy.
Thanks
to @Kickface, (where I first found this solution) wherever you went and any others who have created a truly portable (not minimal) solution to using ADB without installing anything.
Click to expand...
Click to collapse
OMGGGGG this just may solve all my problems I had my personal PC but couldn't get HTC sync manager to connect...The only other PC's I have access to are either desktop @ office or my work "administrator password protected" laptop... TY, TY, TY in advance if this works!!!!

MAJOR PROBLEM!!!! Plz tell me someone can help??
M-FayeHTC said:
OMGGGGG this just may solve all my problems I had my personal PC but couldn't get HTC sync manager to connect...The only other PC's I have access to are either desktop @ office or my work "administrator password protected" laptop... TY, TY, TY in advance if this works!!!!
Click to expand...
Click to collapse
I know this is totally off topic, I'll report myself for it later....
So, I installed the zip file onto my work PC, a DELL Inspiron laptop running Windows 7 professional (I really cannot get too much more info about it now) sorry. My nooby butt just went and downloaded the file not checking the MD5 :crying: Totally a dumb thing a NOOBY would do. It started to get late & I had to get ready to go to work. I know I had the command prompt screen (Black box) running and I then left the computer. 8 hr's later I come home from work and the computer is locked as normal, I to proceed entering Ctrl+Alt+Delete combination as usual & NOTHING (panic setting in)!! I was concerned since it was frozen from something I done, also I didn't want to loose all the work I gathered that night prior (is the very least of my worries now)... I took out the battery to reset the computer, again like a dummy, I started Windows normally ignoring the other "safe mode, etc" options. I click on windows Chrome, NOTHING! Not even an option to open the program/app. Okay, I'm really panicking now WTH did I do??? I knew I did something wrong, so I reset the computer by battery again, put it in "Safe Mode" which did absolutely nothing as I couldn't "open desktop gadgets in safe mode". Now, I restarted the computer from the start menu... Started up completely fine, I have access to everything EXCEPT Chrome, Internet Explorer, etc. anything that is browser related has the administrator shield on the icon. However, I still cannot even click on the icon to run as an administrator even if I had the password!?!?
Is there any possible hope to uninstall that file and just maybe it'll go back to normal??? I cannot re-install Chrome or Internet Explorer due to the darn administrator rights!!!
I've searched to the ends of the earth since last night trying to find a solution, this is my last ditch effort resort for any possible suggestions to point me in the right direction. Luckily my friend was kind enough to lend me his laptop and my phone is in proper working order:angel: If I tell my IT guy what happened, I'll be in huge trouble, going on the 2nd laptop destroyed, 1st time really wasn't my fault, just saying so u don't think I'm continuously reckless.
Any help as always is greatly appreciated! Hoping someone has had this happen maybe:fingers-crossed: and just a slight point in the right direction (link, website, specific thread on forum) would b awesome?? Again, apologies on the "off-topic" content, I don't know what else to do & I feel as though XDA is THE ABSOLUTE BEST forum site for any Android help, apps, devs research, roms, etc. Thx in Advance!!

M-FayeHTC said:
I know this is totally off topic, I'll report myself for it later....
So, I installed the zip file onto my work PC, a DELL Inspiron laptop running Windows 7 professional (I really cannot get too much more info about it now) sorry. My nooby butt just went and downloaded the file not checking the MD5 :crying: Totally a dumb thing a NOOBY would do. It started to get late & I had to get ready to go to work. I know I had the command prompt screen (Black box) running and I then left the computer. 8 hr's later I come home from work and the computer is locked as normal, I to proceed entering Ctrl+Alt+Delete combination as usual & NOTHING (panic setting in)!! I was concerned since it was frozen from something I done, also I didn't want to loose all the work I gathered that night prior (is the very least of my worries now)... I took out the battery to reset the computer, again like a dummy, I started Windows normally ignoring the other "safe mode, etc" options. I click on windows Chrome, NOTHING! Not even an option to open the program/app. Okay, I'm really panicking now WTH did I do??? I knew I did something wrong, so I reset the computer by battery again, put it in "Safe Mode" which did absolutely nothing as I couldn't "open desktop gadgets in safe mode". Now, I restarted the computer from the start menu... Started up completely fine, I have access to everything EXCEPT Chrome, Internet Explorer, etc. anything that is browser related has the administrator shield on the icon. However, I still cannot even click on the icon to run as an administrator even if I had the password!?!?
Is there any possible hope to uninstall that file and just maybe it'll go back to normal??? I cannot re-install Chrome or Internet Explorer due to the darn administrator rights!!!
I've searched to the ends of the earth since last night trying to find a solution, this is my last ditch effort resort for any possible suggestions to point me in the right direction. Luckily my friend was kind enough to lend me his laptop and my phone is in proper working order:angel: If I tell my IT guy what happened, I'll be in huge trouble, going on the 2nd laptop destroyed, 1st time really wasn't my fault, just saying so u don't think I'm continuously reckless.
Any help as always is greatly appreciated! Hoping someone has had this happen maybe:fingers-crossed: and just a slight point in the right direction (link, website, specific thread on forum) would b awesome?? Again, apologies on the "off-topic" content, I don't know what else to do & I feel as though XDA is THE ABSOLUTE BEST forum site for any Android help, apps, devs research, roms, etc. Thx in Advance!!
Click to expand...
Click to collapse
I can tell you that it's not related to the files because I use them on my work PC all the time. I am working 10 hours days, 6 days a week. So the only time I can do anything out of the ordinary on my phone, it has to be at work.
That being said, have you tried system restore? I'm not sure if that requires admin rights, it might. On another note, tell the IT guy your internet explorer just stopped working, they love that. Because seriously, it's unrelated. The most he will do is uninstall and reinstall IE/Chrome. If that doesn't fix it, a system restore should. If that still does not, there is something off with the settings for internet access (I've seen that before). But if you are saying there is a shield/lock over an icon, that's new to me.
Also, I can install chrome at my work. It usually does not require admin rights, that and Firefox. There are also many portable browsers you can download from another PC and copy the zip file to the laptop, and run the app. Just search portable browser. At least this will help determine if the browsers installed got locked or if there is a network setting being blocked.
Let me know how it goes. This IS a bit off topic, but let's figure out what's wrong publicly so the mods can see there is nothing wrong with the zip I posted and then we can have our posts removed.

dopy25 said:
[/HIDE]
I can tell you that it's not related to the files because I use them on my work PC all the time. I am working 10 hours days, 6 days a week. So the only time I can do anything out of the ordinary on my phone, it has to be at work.
That being said, have you tried system restore? I'm not sure if that requires admin rights, it might. On another note, tell the IT guy your internet explorer just stopped working, they love that. Because seriously, it's unrelated. The most he will do is uninstall and reinstall IE/Chrome. If that doesn't fix it, a system restore should. If that still does not, there is something off with the settings for internet access (I've seen that before). But if you are saying there is a shield/lock over an icon, that's new to me.
Also, I can install chrome at my work. It usually does not require admin rights, that and Firefox. There are also many portable browsers you can download from another PC and copy the zip file to the laptop, and run the app. Just search portable browser. At least this will help determine if the browsers installed got locked or if there is a network setting being blocked.
Let me know how it goes. This IS a bit off topic, but let's figure out what's wrong publicly so the mods can see there is nothing wrong with the zip I posted and then we can have our posts removed.
Click to expand...
Click to collapse
Thanks for getting back to me, I appreciate it.
I'm glad to hear that it's not the file bc I cannot uninstall that regardless. We do have crazy blocks on all the computers at my work. I'm pretty sure it has to do with the sensitive information we have (a drug tx center so everyone's personal info is in our database). We can't even update the time on our computers, I have no clue why. I asked him once, he said something about giving that permission would open up another way to bypass security (I can't remember exactly).
This is my laptop, I never even bother bringing into work because I work so much from home. For example my login at the office has updated twice when at home it's still my old login password. The computer is physically in bad shape (it's been used & abused for sure) I'd prefer not to the bring it in for him to see so I plan on waiting to Friday night (IF ALL ELSE FAILS) and txtg him saying I absolutely need to work & see if he will do troubleshoot remote access! I hope that doesn't sound too horrible :-/
As I was typing this I just received an email to restart all workstations due to updates/ changes to the server done this weekend... Hmmmm it could totally be bc of this!!!!! Fingers crossed. I may just have to bring it in let it connect to the local server reset it, and bam good to go If not due to this I can almost guarantee it's the internet settings that I don't have access to!! But the portable browser should work...
I will still try all of your suggestions once I get home this afternoon and report back to you ASAP!!
Luckily I have my friends laptop to borrow & Dell had some good deals on laptops last night so I ordered a really nice one since I really need a personal computer again. Which I will also get an expense check for (bonus)!! But, won't arrive until 3/16. Until then I do have access to extra pc's here I could always swap it out, but I don't want to be scrutinized or punished for being sneaky, it's really not my character...
Again, I appreciate your input. Also, totally agreed on the "off-topic resolution" first and then delete our posts...
Thanks Again!

Yeah, I cannot get through the security on it.
When I look at the properties or try to repair Chrome or IE, it has an incorrect path, totally crazy looking.
\\localhost\C$\os(c\Users\mludford.....
I'm currently downloading a zip for a standalone browser. Hopefully that'll work...
This thread in general is totally crazy too, it looks like I replied like 3 or 4 times, I DID NOT :/ I tried twice & it told me that I didn't have access to the post, with a grey button over my original post you replied to, saying "Spoiler"!?! Very strange....

M-FayeHTC said:
When I look at the properties or try to repair Chrome or IE, it has an incorrect path, totally crazy looking.
\\localhost\C$\os(c\Users\mludford.....
I'm currently downloading a zip for a standalone browser. Hopefully that'll work...
This thread in general is totally crazy too, it looks like I replied like 3 or 4 times, I DID NOT :/ I tried twice & it told me that I didn't have access to the post, with a grey button over my original post you replied to, saying "Spoiler"!?! Very strange....
Click to expand...
Click to collapse
Needless to say it's not the settings or anything with the computer as I took it into work for it to "register" & update to the network settings... Nothing! So, I'm trying the above to see if I can't get around it. Thanks Again

New Verizon Ellipsis 10 Tablet

I purchased the new Verizon Ellipsis 10 in late November. I believe the tablet was released for sale in mid November. My question is can it be rooted? I see the Ellipsis 7 and 8 can rooted. Wondering if anyone would be working on this or because it from Verizon no one cares. I can't find the tablet mentioned on any search that I do. I Have been checking daily to see if the device will have development on it. Thanks in advance for any information.

In the same boat. Need some help you smart tech guys out there. How can I root my Ellipsis 10?

I have the same tablet, and I do not think it could be rooted, at least not in the near future. The tablet comes encrypted (which I am not too happy about....I just noticed it) and cannot be decrypted, even if you do a factory reset. It runs fine as it is, but would be greatly enhanced if it could be decrypted. I also think there are very few devs on this forum that really care a lot about this tablet, so you may not see too much work being done on it.

Same here, just picked one up. Really hoping that there will be a root for this at some point soon. Someone please help us all out!

wish I would have saved the 50$ now, and got the Samsung tablet for free... it's OK, the biggest problem for me is the audio output being too quiet. all the "volume booster's" on the play store have been jenky, to say the least. if anyone has suggestions of a "good, volume booster", or work around, please let me know. thank you for you time.

Oh, No! Sadness!
mikekoz said:
I have the same tablet, and I do not think it could be rooted, at least not in the near future. The tablet comes encrypted (which I am not too happy about....I just noticed it) and cannot be decrypted, even if you do a factory reset. It runs fine as it is, but would be greatly enhanced if it could be decrypted. I also think there are very few devs on this forum that really care a lot about this tablet, so you may not see too much work being done on it.
Click to expand...
Click to collapse
Please, influence some senior devs to help you with this issue!

qtair7 firmware files
https: / / " www dropbox com " /s/f8ye7yw24mjqiva/IR7-20C59.7z?dl=0
just fix the text when u enter in address bar (-""'s,+.'s)

so i downloaded the IR7-20C59..7z package from the software upgrade/repair tool from verizon... I extracted the files and sent the boot.img to my tablet (qtair7) and used magisk manager to patch the boot.img then I used ubuntu to adb pull the magisk-patched-boot.img and modded it using abootimg and changed a few things from default.prop.. ro.secure=0 ro.debuggable=1 and drm.service.enabled=false .. (just saying im an amateur android enthusiast with little experience. ive played with image kitchens and compiled a kernel and ported a rom for the samsung on5 indie variant to have sound on my smg550t1. worked but all google services and apps crash constantly.. but anyways) i dont really know what im doing just saying this is what i did. repacked magisk-patched-boot-new.img then i sent the adb reboot fastboot command to my tablet and it fastboot flashing unlock , fastboot flashing unlock boot, fastboot flash boot magisk-patched-boot-new.img. fastboot continue, fastboot reboot.. the tablet boots and is rooted with magisk.. now i installed busybox to sbin. i have done this 2 times. im not sure if its the busybox or the magisk, but when i reboot following the above steps i get the verizon splash screen and in the bottom righthand corner of the screen it says modified. then boots to recovery. and now can only boot to recovery. now i have the upgrade/repair tool .iso on usb flashdrive that i use to repair my device from this state. which sometimes is a pita.. i have to continually attempt to repair sometimes it takes 2 days.. before it finally works.. i dont know why.. but it boots from fastboot the first time fine. and would like to know how to stop the soft bricking of my device or how i can obtain a twrp.img for this device QTAIR7.. please help ive been working on rooting my tablet for over a year. and feel that i am very close . thanx

Anyone interested in the system.img or any other partitions.. the Dropbox file is only the recovery flash files. I think. I know I couldn't edit system.img from the file with any kitchen but the system.img I dd'd from my device can be edited with kitchen. It's is 3.7gb so in not going to post unless someone can do something with them

Please share some info on the file you posted,..
jonthn41 said:
qtair7 firmware files
https: / / " www dropbox com " /s/f8ye7yw24mjqiva/IR7-20C59.7z?dl=0
just fix the text when u enter in address bar (-""'s,+.'s)
Click to expand...
Click to collapse
Hello, THANK YOU!! This is the most progress I have made in months! I don't know what it is, what it offers, or what to do with it yet, but it is a step!
Could you maybe say what it is, what it will do (how it helps..) and what to do with it?
My Verizon Ellipsis 10 (qtair7), even after wiping the cache, even after doing a factory reset, (even after 'disabling' all but FEW APPS!) JUST SPONTANEOUSLY REBOOTS every time i try to do anything, I try to watch a video it is fine for 5 minutes or an hour then I push volume up or touch the screen and suddenly it reboots, totally random, Clearing the cache gets it to works for a while but it always does it again it has NEVER been usable really,.. It pops up some screen often like"Google Play Services have stopped' something like that,.. Will this help with any of that? Make it more,. stable?
I wish I could just do ANYThING simple to make it better I just use it for video playback,.
THANK YOU!

I have the same tab with the same issues. Rebooting, random cut out and full on reboot. Just before it became target practice I decided to take it apart, just because that's what I do when I'm bored and my ADHD is taking over. I looked up the tab on youtube to see if there was any vids of how to get it apart and found a guy that said he fixed the with the tablet that no one could figure out. Meh I was like ok I'll give him a couple seconds checked it out. He found that all connections, screws holding boards down, and power were all loose. Once he went through all of that it had fixed the issues. So I tried it and damn, everything from screws holding boards down to power feeds were all loose, really bad loose. Got mine working good now. Haven't had issues since. Now if I can get it rooted I'll be good. And I suspect the loose connections would also potentially cause the battery to go bad from excessive amperage draw and charge in short time, over time.