i ws adding the upgrade.bat file and my computer got stuck so i had to restart the machin after it rebooted i ran that file again and after the file is compleated i rebooted the pda but now its stuck in the qtec (the cloudy sky)screen and i cant even detect it in active sync but it detects as usb device what can i do plssssssssssssssss??????????
oshan1991 said:
i ws adding the upgrade.bat file and my computer got stuck so i had to restart the machin after it rebooted i ran that file again and after the file is compleated i rebooted the pda but now its stuck in the qtec (the cloudy sky)screen and i cant even detect it in active sync but it detects as usb device what can i do plssssssssssssssss??????????
Click to expand...
Click to collapse
remove buttry and wait 4second ,install it and hold camera key and press on power of your device (in 3 colored screen) then connect USB (usb text will be shown in button of device) and run original rom of your device (from ftp in xda-developer or shipped site), percent of uploading to flash rom will be shown in device screen.
Related
When i flashing my pda, the usb cable is plug off. now my pda cant restart and cant connect to pc. Can any1 help? i am a noob.. please help!!!!
Try to put it into bootloader Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader... then flash it again...
I tried but it doesn't work....it's now in the Bootloader screen, but windows xp cannot even detect it
You cannot use "upgrade_rom.bat" to flash your device with RGB screen. The bat file is for upgrade, not for fresh install.
You have to install AKU2.xx NVID.exe (executable) first. The .exe file can recognize ur device via RGB screen.
After reset your device with AKU2.x and successfully connect to the PC vis Activesync, you then can run upgrade_rom.bat.
where can i download AKU2.xx NVID.exe?
You can download RUU_Prophet_220734_2207114_024721_NVID from this link
http://rapidshare.com/files/18507453/RUU_Prophet_220734_2207114_024721_NVID.exe
of the FTP server,check it out on WIKI to find the link!!
Hello there.
i was trying to upgrade my executive to WM6 but unfortunately while i was updating the rom an error occurred and now my phone is stuck on a black screen saying on top USB and v2.01 on the bottom
what should i do??
unplug.
re-connect/re-plug
again put it into bootloader mode
run the utility again
thanx for the inf but i have already done that and nothing...
the same screen is shown... and when i try to reinstall the new rom its says that the pc is not communicating with the phone :S
moixalakix said:
thanx for the inf but i have already done that and nothing...
the same screen is shown... and when i try to reinstall the new rom its says that the pc is not communicating with the phone :S
Click to expand...
Click to collapse
Are you running Vista or XP (on your PC)?
Also, ensure that the PC has connected to the PDA successfully (ie no driver issues, USB cable okay, etc)
Vista and i think thats why i cant do anything and its stuck there...
try the same but in a xp machine.
Hi,
I wanted to update an I9003 from Android 2.2 to 2.3.4 JPKP5 (with latona.pit, I used this combination twice with two other phones), I used odin 1.85 for this purpose.
Connected the phone to the PC, it failed to install one of the drivers, but, it appeared in odin... so, I continued :cyclops:.
the operation stopped at about the mid-way and there was "FAIL" and red slot....
Unplugged and plugged it (without restarting, and the progress bar was still there) odin recognized it but couldn't flash again, stuck at "SettingUpConnection"...
I pressed the power button to restart it... then it showed (Phone <!> PC) logo in the screen....
Turned it off by removing the battery, I doesn't boot to recovery nor normal boot...
BUT, I can go into download mode without being apple to connect it to the PC, it shows me (USB device is not recognized) and doesn't appear in odin.
SO.... What is the phone's state and what can I do to fix the problem??
Thank you in advance
you have installed the drivers in your pc? If not yet, install KIES first.
I had the same issue. Even after installing kies my com: port didn't detect . So i reinstalled Windows 7 & installed kies after that. Now odin worked perfect.
Sent from my GT-I9003 using xda app-developers app
I know what you're talking about... the drivers are installed properly and I connect other device to odin properly... I can tell that the problem is because of the device... It's dead for ever!!
I think it is bricked. So try to reinstall the drivers and install any other rom. If it is not working try a JTAG repair.
I need a little help my device is stuck in apx mode (blank screen with power led on) i have uid (cpuid) and sbk i have read a lot fom this forum and have all the tool to root, flash, load.. But my main problem is that when i reset my acer a500 and the usb is attached the windows 7 recognizes the driver and (sound pops up) and the driver (acer picasso usb boot recovery driver) is there but no tool e.g apxtool or fastflash or ics rooting nothing works or regocznies the device coz when i press any option or press the key to continue the drive drops and vanishes from the window usb list in device manager and i have to manually reset acer again to get the driver back but still no use as command prompt tells me that no device is attached or found. Please help as this acer is my wifes gift to me and im trying hard to get it back its totally dead
Help please! I was trying to install a custom touch recovery with Odin, as soon as i flashed it into my phone, my phone stopped and now I am unable to enter recovery or download mode, the PC doesn;t detect it and it won't boot, just shows the samsung logo with the phone model name (Galaxy S Advance). When i connect my phone to PC it just shows the loading wheel, and from that point I can't do anything with my phone, I have tried all the possible methods of connecting my phone without battery, turning it on before connecting to the usb cable etc. I also reinstalled the drivers but without success.
Please consider these issues:
*I can't enter download mode or recovery mode;
*The PC doesn't detect my phone;
*My volume buttons don't work. I used to enter recovery and download mode via adb and 300k tool, but now my phone is undetectable by PC.
XDA Visitor said:
Help please! I was trying to install a custom touch recovery with Odin, as soon as i flashed it into my phone, my phone stopped and now I am unable to enter recovery or download mode, the PC doesn;t detect it and it won't boot, just shows the samsung logo with the phone model name (Galaxy S Advance). When i connect my phone to PC it just shows the loading wheel, and from that point I can't do anything with my phone, I have tried all the possible methods of connecting my phone without battery, turning it on before connecting to the usb cable etc. I also reinstalled the drivers but without success.
Please consider these issues:
*I can't enter download mode or recovery mode;
*The PC doesn't detect my phone;
*My volume buttons don't work. I used to enter recovery and download mode via adb and 300k tool, but now my phone is undetectable by PC.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/galaxy-s-advance
After creating your account, please ask your question here:
http://forum.xda-developers.com/showthread.php?t=1690709
The experts for your device are located there and will be able to help.
Good luck!