Hi,
I wanted to update an I9003 from Android 2.2 to 2.3.4 JPKP5 (with latona.pit, I used this combination twice with two other phones), I used odin 1.85 for this purpose.
Connected the phone to the PC, it failed to install one of the drivers, but, it appeared in odin... so, I continued :cyclops:.
the operation stopped at about the mid-way and there was "FAIL" and red slot....
Unplugged and plugged it (without restarting, and the progress bar was still there) odin recognized it but couldn't flash again, stuck at "SettingUpConnection"...
I pressed the power button to restart it... then it showed (Phone <!> PC) logo in the screen....
Turned it off by removing the battery, I doesn't boot to recovery nor normal boot...
BUT, I can go into download mode without being apple to connect it to the PC, it shows me (USB device is not recognized) and doesn't appear in odin.
SO.... What is the phone's state and what can I do to fix the problem??
Thank you in advance
you have installed the drivers in your pc? If not yet, install KIES first.
I had the same issue. Even after installing kies my com: port didn't detect . So i reinstalled Windows 7 & installed kies after that. Now odin worked perfect.
Sent from my GT-I9003 using xda app-developers app
I know what you're talking about... the drivers are installed properly and I connect other device to odin properly... I can tell that the problem is because of the device... It's dead for ever!!
I think it is bricked. So try to reinstall the drivers and install any other rom. If it is not working try a JTAG repair.
Related
. .
. .
I know, silly response, but is your phone is USB debugging, and after you connect it via usb, do you manually mount the device from the notification menu?
Good Luck.
Redfoot
. .
If you're using Windows 7, Windows may not be assigning a drive letter to the phone when you plug it in.
Is if this helps.
I had this similar problem today... I fixed it by uninstalling Kies/Drivers, re-installing drivers from the Samsung website, unplugging the Captivate, restarting it into Download Mode (Power + Volume Up & Down), and plugging back in the Captivate. Windows 7 said "Installing new drivers" (which it installed the USB ADB drivers), but said the device "could not start". I unplugged the phone, took out the battery, rebooted the phone, and plugged the phone back in. Windows 7 said again it was installing the drivers, this time with success. Yay!
. .
I think you can flash using Odin One click. just try to reinstall samsung drivers anyway. or use the repair driver utility on kies. then try odin. don't give up :T
im stuck on the samsung galaxy s 19000 boot screen and i can go into download mode but not into recovery... but the problem is that i cant get my phone to connect to computer thru kies or anything and i tried using another cable and computer...can anybody help me plaese??
Did you install the drivers for your phone on the computer? I was in a similar situation with a Samsung fascinate. I got stuck on a boot/flash loop. What I did was look for the phones drivers, installed them on the computer, get it into download mode (with the android shoveling), looked for the Odin software, looked for the fascinates factory rom, and flashed it through Odin.
Sent from my ADR6300 using XDA App
yea i installed the drivers and reinstalled them but it still says usb device not recognized and on device maneger says unknown device and i dont know waht to do.. if it at least get it to connect once i will be very happy
As it says, I flashed the KG4 ROM perfectly, and went to root it following this guide:
http://forum.xda-developers.com/showpost.php?p=15973153&postcount=211
And the 1st flash went well, saw the red Fugu fish, and boot looped as needed. Rebooted then into Download mode to flash the second file, and windows will not recognize my phone. Just gives me an unrecognized device error. I reinstalled the Samsung USB driver kit, the Ericson kit, and still nothing. (Did restarts between uninstalls/reinstall btw) And I've tried different USB ports on the PC. Still nothing, and obviously ODIN will not see my phone to finish the flash... Did I miss something? Anyone else hit this issue?
unplug. plug into a different usb port after restarting the computer
Still a no go.
Damn, after several Uninstall and re-installs of Samsung's USB Driver pack (Direct from their site), I FINALLY Got it to connect and finished my flash! I Don't know why it was so picky...
thats good to hear
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Restart everything
Restart you phone into d/w mode (if your hardware buttons are working ), restart you computer. Now it should detect.
And while you're in the process of flashing, make sure you the cable doesn't get disconnected.
This happened with me too, I just deleted odin & again extracted it from the rom folder(In every kyrillos rom package you can find odin)...
Just delete the old odin & get a new one, it will work...
Sent from my GT-I5800 using Tapatalk
suryarockzz said:
Hello, i want help please, anyone can you tell me how to get odin to detect my phone coz it is not detecting the ohne and i m stuck in d middle of installing ics on my phone.
Click to expand...
Click to collapse
Is this the first time you are using odin in your computer ? or your already detected before only now it is not detecting ?
because odin works fine in my computer , but wen i try it in my friend's computer
it did not detect
-> reinstall your phone drivers it might help
-> if i am correct Odin detect your phone only in download mode
Come out of odin and just plug your phone in to the comp, if the comp recognises it then you know your usb drivers are working fine on phone and comp, if not then thats your problem. reinstall drivers.
If it did recognise then the problem is with odin. Theres loads of versions out there that have pathway issues and other problems due to the way theyve been aquired or packaged. try typing "I5800_Odin_Multi_Downloader_v4.252.exe" its what i did and mine works everytime.
If i helped, hit thanks
Try with another USB port. It will probably work if you´d try, because I had a similar problem. PC simply didn't recognize my Samsung Galaxy 3, but when I plugged the phone in another USB port, the phone was recognized and so was Odin. But of course it wont go without appropriate drivers.
I had the same problem yesterday and switching USB-ports didn't help. It seemed I didn't have Kies installed so the USB-drivers were missing... After installing Kies everything went fine
hey, I had the same issue.. and what I did to resolve was : I downloaded USB drivers from the below link..installed and rebooted my system..and tried again..it finally got detected..I hope it helps..
link for drivers :
forum.xda-developers.com/showthread.php?t=728929
What worked for me was after installing the Samsung driver, I updated the driver from the Device Manager while the phone was plugged in and in download mode.Odin found the phone after that.
Battery percentage
Make sure your Battery Percentage is More than 50 %
Check your USB cable is in Working Condition .....
-fgfgdf
I usually keep flashing ROMS.
This time in sheer confidence I didnt charge the battery full.
I was switching from mokee 4.4 to CM11.
I wiped everything for a fresh install and unfortunately CM11 didnt install.
The tab restarted and now it wont go into recovery. what just happened?
It is just showing logo and I cannot get into Odin more either.
The tab had about 30% battery when it shut off and I cannot reach a charger for it for the next 4 hours.
Can I switch it off in any way to save battery?
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
devarshi84 said:
the phone has switched off now. Is service center the only alternative? the tab was rooted with mokee installed.
Click to expand...
Click to collapse
Try charging it when you have time and then try re flashing the stock Rom before taking it to service center
will the tab 2 charge without a recovery or ROM in place?
devarshi84 said:
will the tab 2 charge without a recovery or ROM in place?
Click to expand...
Click to collapse
I think it should
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
devarshi84 said:
Ok, the tab2 is charging. thank you
I installed all the necessary drivers and odin and recovery on my laptop.
The tab2 is giving error on pc (this device wont start) mtp uSB. THe tab is stuck at 'samsung p3100' logo.
If it is any help, I have a working p3100 also running on stock firmware.
what should be my next step? I think I can manage if only I can get odin to recognize my phone or get into recovery (both of which seem to be missing.)
Click to expand...
Click to collapse
Try reinstalling drivers
@shsagnik : Thank you very much for helping out.
I got installed all drivers by using the other P3100. But when I connect the bricked p3100, pc doesnt install MTP USB drivers. Under device manager it says " failed to start".
ODIN doesn't recognize it. either.
My mistake was I flashed everything on the phone including the internal memory.
PS: Can I force ODIN to recognize my phone?
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
devarshi84 said:
Ok, my almost bricked device is back and runnning.
This might just help somebody. but my android handset was on a logo only mode. something in the combination of
Attaching it to pc (windows 7 64-bit)
re-installing and rejigging drivers
trying to let ODIN identiify
connecting via Samsung kies (I also tried restore on kies).
connecting a working android phone instead of the dead phone with pc to find and install drivers.
worked.
PS: I also let it sit dead powered off (worked only when charger was attached) for a whole day before trying to boot into recovery or bootlaoder (both worked).
Click to expand...
Click to collapse
Awesome, now please change the title to solved