Database Info

Flashing new rom through miniSD card?

Is there a way that I can't flash new room to my G3 because some how the usb connection of my device doesn't work no more. It only charges the device. If I plug it into windows it say my device is unrecognized. Plz help me.

Try to see if it is still recognized as Unknown Device in bootloader mode (Camera mode)
If so, you need another good Wizard to create SD image using r2sd in mtty, then restore to your Wizard by pressing Voice button and reset.

imate jamin(qtec s200)jamed on bootloader screen no active sync connection pls help s

i ws adding the upgrade.bat file and my computer got stuck so i had to restart the machin after it rebooted i ran that file again and after the file is compleated i rebooted the pda but now its stuck in the qtec (the cloudy sky)screen and i cant even detect it in active sync but it detects as usb device what can i do plssssssssssssssss??????????

oshan1991 said:
i ws adding the upgrade.bat file and my computer got stuck so i had to restart the machin after it rebooted i ran that file again and after the file is compleated i rebooted the pda but now its stuck in the qtec (the cloudy sky)screen and i cant even detect it in active sync but it detects as usb device what can i do plssssssssssssssss??????????
Click to expand...
Click to collapse
remove buttry and wait 4second ,install it and hold camera key and press on power of your device (in 3 colored screen) then connect USB (usb text will be shown in button of device) and run original rom of your device (from ftp in xda-developer or shipped site), percent of uploading to flash rom will be shown in device screen.

[Q] USB device is not recognized when on "download mode"!

Hi,
I wanted to update an I9003 from Android 2.2 to 2.3.4 JPKP5 (with latona.pit, I used this combination twice with two other phones), I used odin 1.85 for this purpose.
Connected the phone to the PC, it failed to install one of the drivers, but, it appeared in odin... so, I continued :cyclops:.
the operation stopped at about the mid-way and there was "FAIL" and red slot....
Unplugged and plugged it (without restarting, and the progress bar was still there) odin recognized it but couldn't flash again, stuck at "SettingUpConnection"...
I pressed the power button to restart it... then it showed (Phone <!> PC) logo in the screen....
Turned it off by removing the battery, I doesn't boot to recovery nor normal boot...
BUT, I can go into download mode without being apple to connect it to the PC, it shows me (USB device is not recognized) and doesn't appear in odin.
SO.... What is the phone's state and what can I do to fix the problem??
Thank you in advance

you have installed the drivers in your pc? If not yet, install KIES first.

I had the same issue. Even after installing kies my com: port didn't detect . So i reinstalled Windows 7 & installed kies after that. Now odin worked perfect.
Sent from my GT-I9003 using xda app-developers app

I know what you're talking about... the drivers are installed properly and I connect other device to odin properly... I can tell that the problem is because of the device... It's dead for ever!!

I think it is bricked. So try to reinstall the drivers and install any other rom. If it is not working try a JTAG repair.

[Completed] Bricked Galaxy S Advance-No recovery mode,no download mode,undetectable by PC!

Help please! I was trying to install a custom touch recovery with Odin, as soon as i flashed it into my phone, my phone stopped and now I am unable to enter recovery or download mode, the PC doesn;t detect it and it won't boot, just shows the samsung logo with the phone model name (Galaxy S Advance). When i connect my phone to PC it just shows the loading wheel, and from that point I can't do anything with my phone, I have tried all the possible methods of connecting my phone without battery, turning it on before connecting to the usb cable etc. I also reinstalled the drivers but without success.
Please consider these issues:
*I can't enter download mode or recovery mode;
*The PC doesn't detect my phone;
*My volume buttons don't work. I used to enter recovery and download mode via adb and 300k tool, but now my phone is undetectable by PC.

XDA Visitor said:
Help please! I was trying to install a custom touch recovery with Odin, as soon as i flashed it into my phone, my phone stopped and now I am unable to enter recovery or download mode, the PC doesn;t detect it and it won't boot, just shows the samsung logo with the phone model name (Galaxy S Advance). When i connect my phone to PC it just shows the loading wheel, and from that point I can't do anything with my phone, I have tried all the possible methods of connecting my phone without battery, turning it on before connecting to the usb cable etc. I also reinstalled the drivers but without success.
Please consider these issues:
*I can't enter download mode or recovery mode;
*The PC doesn't detect my phone;
*My volume buttons don't work. I used to enter recovery and download mode via adb and 300k tool, but now my phone is undetectable by PC.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist!
First, please create an account so you can post in other forums.
Here is your device's main forum area:
(You should bookmark this)
http://forum.xda-developers.com/galaxy-s-advance
After creating your account, please ask your question here:
http://forum.xda-developers.com/showthread.php?t=1690709
The experts for your device are located there and will be able to help.
Good luck!

Lenovo A850i cannot detect by pc after flash

hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...

What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only

northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery

jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:

northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first