Hello there.
i was trying to upgrade my executive to WM6 but unfortunately while i was updating the rom an error occurred and now my phone is stuck on a black screen saying on top USB and v2.01 on the bottom
what should i do??
unplug.
re-connect/re-plug
again put it into bootloader mode
run the utility again
thanx for the inf but i have already done that and nothing...
the same screen is shown... and when i try to reinstall the new rom its says that the pc is not communicating with the phone :S
moixalakix said:
thanx for the inf but i have already done that and nothing...
the same screen is shown... and when i try to reinstall the new rom its says that the pc is not communicating with the phone :S
Click to expand...
Click to collapse
Are you running Vista or XP (on your PC)?
Also, ensure that the PC has connected to the PDA successfully (ie no driver issues, USB cable okay, etc)
Vista and i think thats why i cant do anything and its stuck there...
try the same but in a xp machine.
Related
Everytime I connect my PC to the phone via USB cable, I get a message from XP saying,
"USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned, and Windows does not recognize it."
Activesync never goes green and I can't flash my phone to a more stable ROM. I just got my TILT 2 days ago and really don't want to be stuck with such a slow ROM. I flashed the phone to the HTC AKU bigstorage ROM before this and everything worked fine. It's just when I tried to flash to the AT&T Rom did I run into this problem.
Any help will be much appreciated. Thanks.
Have you tried rebooting your PC?
If rebooting the PC doesn't do it you may need to completely re install activesync itself. Worked for me....
I reinstalled activesync and now it works.
BTW, is there a way to stop Activesync blinking my programs in and out from being selected on my PC?
setting -> connections ->usb to pc -> uncheck a mark. this should help.
the best idea - change rom to htc, faster, more relible, no sync problems.
hello all,
i have no idea what has happened to my universal (imate jasjar)
i started upgrading to a new ROM, and then it got stucked on the bootloader. it only shows
USB (when connected to usb, or serial if not), V0.6 on the bottom of the screen.
i tried the ulock of the bootloader, (light, softrest, power), exitbootloader, but nothing worked.
when trying to use mtty it gives me an error (can not open usb).
i am using vista.
any help will highly appreciated
thanks a lot in advance
cheers
just to add one thing,
I NEED MY PHONE BACK.
pleeaase help me
I also got that USB-port problem trying to use mtty and UNI_exitbootloader.exe thoug i had disabel the USB-port in WMDC(I am using Vista ) so I tried a PC with XP and activesync. Same Problem. Then I tried to remove activesync. Same Problem.
Then I tried a PC with XP but where activesync had never been installed at. And this worked. Now I did see the USB in port menu in mtty.
Sara
sarasera said:
I also got that USB-port problem trying to use mtty and UNI_exitbootloader.exe thoug i had disabel the USB-port in WMDC(I am using Vista ) so I tried a PC with XP and activesync. Same Problem. Then I tried to remove activesync. Same Problem.
Then I tried a PC with XP but where activesync had never been installed at. And this worked. Now I did see the USB in port menu in mtty.
Sara
Click to expand...
Click to collapse
hello sara,
thanks a lot for ur feedback, unfortunatly, i don't have xp now. i will check out tomorrow.
thanks
replace your cable...i had the same issues and that solved them. hope it helps.
Use XP, disable ActiveSync and then connect USB to your PPC. Mtty will show USB. I did it thousand times. Tested and working!
Vista and ROM upgrading ... they don't mix.
For upgrading your ROMs or doing any such thing to your Uni, use XP.
Search the forum, there shoulod be post somewhere with the XP USB drivers attached, if I remember correctly, replacing the Vista drivers with those will probably solve the problem, but with Microsoft, you can never be 100% sure...
Hi all,
I was trying to upgrade my imate jasjar to 3.2 thingonaspring.5.2.1933.18533.REALVGA. However in the middle of the proccess it gave an error.... The title of the Ruu says it is "error 260". I fallowed the stpes as the program says. (1st disconnect and hard reset and reconnect).
I recieved the screen saying USB on the top and v0.60 on the bottom... however whenever i press next the RUU stops responding... So i can not recover :S:S:S
I am using vista ultimate on my PC
Please help me..
first restart your computer, than upgrade your Bootloader (attached) and than put device in Bootloader again and when you see usb run upgrade again.
I now get a connection error (error 101). i have checked my connections and they re all fine... Vista recognizes the device as Microsoft USB Sync... and it says "usb" instead of "serail" on the pda screen. However , i got an connection error
sefba said:
I know get a connection error (error 101). i have checked my connections and they re all fine... Vista recognizes the device as Microsoft USB Sync... and it says "usb" instead of "serail" on the pda screen. However , i got an connection error
Click to expand...
Click to collapse
For Vista users: http://forum.xda-developers.com/showthread.php?t=313001
In future, please read the wiki
My computer not Detecting Drivers of my phone previously it was detecting without issue...actually i was at kyrillos 10.5 and a few days ago i returned back to stock froyo but the problm is not my pc not detecting its drivers and the error comes that driver cant b installed successfully...plz help..and can i download driver manually if yes plz give the link. .
mohdwaqar said:
My computer not Detecting Drivers of my phone previously it was detecting without issue...actually i was at kyrillos 10.5 and a few days ago i returned back to stock froyo but the problm is not my pc not detecting its drivers and the error comes that driver cant b installed successfully...plz help..and can i download driver manually if yes plz give the link. .
Click to expand...
Click to collapse
If you have kies then just install kies on pc then connect your phone;dont need to install driver manually.
Sent from my GT-I5800 using xda premium
I had the same problem long ago
You need to remove all the Samsung drivers and kies if present in your PC and install Samsung USB drivers (find them from xda or Google or install kies)
Connect your phone in download mode and let the system detect your phone
Sent from my GT-I5800 using xda app-developers app
this problem was caused by the last update!
mohdwaqar said:
My computer not Detecting Drivers of my phone previously it was detecting without issue...actually i was at kyrillos 10.5 and a few days ago i returned back to stock froyo but the problm is not my pc not detecting its drivers and the error comes that driver cant b installed successfully...plz help..and can i download driver manually if yes plz give the link. .
Click to expand...
Click to collapse
This is a NEW problem that is affecting many thousands of people and it happened after the last update.
I have a GT 19300 v4.1.2 and all was well until I installed the update.
Now when I connect the phone to my PC (W7) the system sees it and tries to install drivers but then gives a message saying the it failed to install them.
Device manager now shows my phone as an unknown device and it didn't before.
I have tried lots of fixes and there are now dozens and dozens of them on different forums and none of them work.
This is not a cable problem and not a Kies problem. Lots of people including me have installed and uninstalled it.
I have the Samsung GS3 Int ToolKit an it installed the latest drivers today 1.5.15.0 and they didn't help.
Many people have tried a reset and all it did was waste their time so don't bother.
It looks like only Samsung or Google can fix the problem but I'd love to here of another fix.
More information
redbourn said:
This is a NEW problem that is affecting many thousands of people and it happened after the last update.
I have a GT 19300 v4.1.2 and all was well until I installed the update.
Now when I connect the phone to my PC (W7) the system sees it and tries to install drivers but then gives a message saying the it failed to install them.
Device manager now shows my phone as an unknown device and it didn't before.
I have tried lots of fixes and there are now dozens and dozens of them on different forums and none of them work.
This is not a cable problem and not a Kies problem. Lots of people including me have installed and uninstalled it.
I have the Samsung GS3 Int ToolKit an it installed the latest drivers today 1.5.15.0 and they didn't help.
Many people have tried a reset and all it did was waste their time so don't bother.
It looks like only Samsung or Google can fix the problem but I'd love to here of another fix.
Click to expand...
Click to collapse
Today I disconnected the internet and plugged the phone into a different USB socket before booting the PC
The message I got this time was,
Samsung_Android X Device unplugged
Unidentified Device X No driver found
The above makes no sense to me but if it does to you then please let me know.
Thanks,
Michael
Some strange stuff going on
redbourn said:
Today I disconnected the internet and plugged the phone into a different USB socket before booting the PC
The message I got this time was,
Samsung_Android X Device unplugged
Unidentified Device X No driver found
The above makes no sense to me but if it does to you then please let me know.
Thanks,
Michael
Click to expand...
Click to collapse
I got a message on my cellphone "the software does not exist on your phone to allow it to connect with your phone. You need .. XP with Windows media player ..." I don't remember the exact words". I'm using W7
Then when I unplugged my phone W7 said drivers are being installed and then said successfully installed. I plugged the phone in and it was recognized.
I opened Samsung GS3 Int ToolKit but it didn't show a serial at the top. I attempted to do a back up of all programs but gave up after a message, "waiting for ADB mode" appeared on the screen for over an hour. My phone isn't rooted; is that why?
The phone is no longer being recognize
Michael
---------- Post added at 12:07 PM ---------- Previous post was at 11:57 AM ----------
redbourn said:
Today I disconnected the internet and plugged the phone into a different USB socket before booting the PC
The message I got this time was,
Samsung_Android X Device unplugged
Unidentified Device X No driver found
The above makes no sense to me but if it does to you then please let me know.
Thanks,
Michael
Click to expand...
Click to collapse
I got a message on my cellphone "the software does not exist on your phone to allow it to connect with your phone. You need .. XP with Windows media player ..." I don't remember the exact words". I'm using W7
Then when I unplugged my phone W7 said drivers are being installed and then said "not successfully installed".
But the box opened for a few seconds asking me what I wanted to do with the phone. View contents etc.
Michael
I am trying to unlock bootloader on a new htc one x(at&t) that i recently got. I have windows 10. When i connect my device to the computer it recognizes it easily. However, when i boot into fastmode, it doesnt recognize the device at all. i tried updating driver but nothing changed. What should i do???? please help me!
lPlease ignore. wrong forum
you probably need a PC running WinXP / Win7 to do it
the phone cant be recognized in Win8 or later even the HTC driver installed properly