Database Info

99% Freeze?

My ROM upgrade freezes at 99%. Please tell me what im doing wrong.

mr.allawi said:
My ROM upgrade freezes at 99%. Please tell me what im doing wrong.
Click to expand...
Click to collapse
If it's a ROM you cooked yourself then it's too large to fit. Otherwise, not sure.

What ROM are you trying to flash?

update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.

I'm gonna say this just to cover all the bases..I'm not sure how long you are waiting but a standard flash can stay at 99% for a LONG time before finally finishing the flash...when they say the flash should take around 10 minutes they are not kidding so I hope you are not just getting impatient.

Merlin_reloaded said:
What ROM are you trying to flash?
Click to expand...
Click to collapse
I have tried all roms, they all have the same problem!

Just wait for it, it stays at 99% for 5 mins sometimes.

it says failed to complete then it shows some recovery.

raj_luvs_frnds said:
update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.
Click to expand...
Click to collapse
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?

mr.allawi said:
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?
Click to expand...
Click to collapse
hold down the record button and comand button at the same time then reset using the stylus (while holding the buttons) then a black screen will appear asking you to press call button to hard reset
for more details you have to visit wiki

It sounds to me like you didnt do much reading before diving into this whole process. If you have a CID locked g4, you will never be able to flash a custom rom with ruu method untill unlocking it.
Should you use shelltool then you will need to wait untill it says it is finished(read all instructions before attempting. They will tell you everything you need to know) If shell tool never gives you the complete message then just let it sit for about half an hour to be safe and then just HARD RESET, NOT SOFT RESET by holding comm manager, voice button and using stylus to reset with the little pin hole.
If you read everythign there is to know about the process and all possibilities, then you will have no problem.
Just read read read... This website is like the rom flashers bible. Everything you need to know is all here. You just have to find it and read it.

please help my mda stucks when it starts

just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??

asaf_hermann said:
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
Click to expand...
Click to collapse
Hard reset

how??
i cant turn it on, it stucks at the beginning

asaf_hermann said:
how??
i cant turn it on, it stucks at the beginning
Click to expand...
Click to collapse
The wiki is your friend.

can you please tell me what to do?

asaf_hermann said:
can you please tell me what to do?
Click to expand...
Click to collapse
To perfomr a Hard Reset :-
In this scenario the common solution is to do a hard reset,to do the Hard reset.Press and hold the comm manager button and the voice command button,while keep the two buttons pressed,and at the same time,use the stylus to lightly press and hold the Reset button,the phone will reboot and ask for confirmation,accept it and phone will do a hard reset.check if it helps,otherwise,most probably,its a bad flash or the the extended_rom is corrupted.Reflash the official carrier's rom to clear/correct the extended_rom or reflash the TNT 19209 touchflo ,do this with getting into Bootloaders (Tricolor screen),hope it'll work.

the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say

ultimate solution is with me
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u

naren3108 said:
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
Click to expand...
Click to collapse
Be a sport,don't start posting the same request and offering your service to everybody and in every thread, requesting them to send their phones to you for repair,you know it yourself its not feasible and practical.If you have a genuine solution,why don't you start a new thread and post the procedure alongwith the software you claim you have to revive a phone in this manner,if you honestly intend to help and do a service to the community. According to your name and email ,I presume you are somewhere in India,do you think,its viable to send all the phones from all around the world to you for repair,NO kidding !!! I don't mean any offense towards you though !

asaf_hermann said:
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
Click to expand...
Click to collapse
Activesync will not work in this situation,but if you are able to get into Bootloaders (tricolor screen) its possible to flash a rom,and you don't need to activesync to perform a flash,infact when you start a Rom to flash,it automatically cuts off the activesync all by itself even in the normal condition,so don't worry if the activesync doesn't work now,just try to get into Bootloaders mode and flash a rom.

how can i get into bootloaders mode?

asaf_hermann said:
how can i get into bootloaders mode?
Click to expand...
Click to collapse
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok

if everything fails rememer me........but be fast and stop trying all hanky panky things on ur device it can damage it further........

zabardast_1 said:
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
Click to expand...
Click to collapse
yesss.. thanks!! it works!
the bootloader worked.. thank you very much! i really appreciate your work and time that you spend for me. thank you! you saved my phone.

Issues after flashing to new rom.

Recently I got my Fuze in the mail and I wanted to try out some of the roms here at xda devs.
I played around with NATF winmo 6.1 rom and it was nice but soon after I wanted to try RRE's version of 6.5 I followed all the directions for flashing the rom to sd card. but after the flashing I noticed that the old boot splash screen from NATF's win mo 6.1 was still there and I wanted to know how do i fix that.
I was not too sure how to word this or search for it in that matter but any help would be greatly appreciated

Might try reflashing, then, when you see the screen "tap to set up your screen" (where you press the + on the screen in the middle & corners), do a HARD RESET. hold down volume down, press the center "ok" key, the one inside the ring of light, press the reset button on the bottom of the phone, release the reset button BUT CONTINUE to hold the volume down, ok button til the screen comes up, follow the directions (tells you to press the volume UP key). Let it load, and see if that fixes it.

Tried that no luck
It's kinda weird you would think that after flashing a rom everything would be gone but thanks for your help

go to natf's 4.7 thread and read the first couple posts... your answer is there. the reason it wasnt removed because RRE's rom doesnt have a splash screen.

you could always add your own splash screen...

Thanks to all for the info I will look at that.
I still find it weird that that would happen but you guys on more on the level than I am with all of this.
Oh yea and is there a way to install a flash screen on a working device or do i have to cook it into the rom and re-flash it.

OvermindX said:
Thanks to all for the info I will look at that.
I still find it weird that that would happen but you guys on more on the level than I am with all of this.
Oh yea and is there a way to install a flash screen on a working device or do i have to cook it into the rom and re-flash it.
Click to expand...
Click to collapse
I think this is the link on installing a splash screen..... if I'm not mistaken, you don't have to reflash or cook it into a ROM but I could be mistaken.... i think you just format your picture then place it into your windows folder somewhere.... read on.
http://forum.xda-developers.com/showthread.php?t=474070

I am getting frustrated:/

3 days back i noticed that no matter how many times i press the power button on my HTC Touch Pro(Vodafone) the back light wont go off.If i keep on pressing it a power off message would appear asking me should i switch off my phone.By changing the power settings i had set it to Turn off the backlight after 30 secs(If not used).Which helped but the problem remains the same,after the backlight goes off it wont come back no matter how many times i press the power button:/.
It would only come back by sliding the Qwerty,as a result the Phone despite of the fact being turned off is using power and my phone dies off after 3 hours or so:S.I tried resetting it by Clearing the Storage(7 times) but it didn't help.After i which i opted to Hard reset it by holding down the Vol & Enter button and then pressing the rest using Stylus,but no matter how many times i try it the stupid Vodafone startup screen would appear and it would not(Tried it when the phone was on).the phone simply wont shut down,i tried by pulling off the batter,but once the battery is in it would start all by itself:/(In this way i cant hard reset the phone while it is off:/:/).How can i hard reset it??Somebody please help me!!!!
P.S:I have unlocked the phone so that i can use it in here.

Sounds really weird... maybe you can try executing task29 and flash a new rom....
but I'm not sure...

muhammad.hayat86 said:
P.S:I have unlocked the phone so that i can use it in here.
Click to expand...
Click to collapse
Do you mean HardSPL? You could try flashing a stock ROM to the device after putting it in bootloader (hold volume down and press reset, keep holding volume down until you get the tricolour screen).
This thread should really be in the 'General' section...

@Ben
Sorry mate i am a new user of this forum so didn't knew in which section should i place this thread, apologies for that.
From where would i find a stock ROM and how would i flash it(Procedure in detail)?And after flashing this stock ROM would i be able to restore everything using Sprite backup?
Thanks in advance!!

Follow this guide if it's your first time, and as long as you've already backed your data up (which you should have if you were doing a hard reset anyway) then you should be fine with Sprite.

muhammad.hayat86 said:
@Ben
Sorry mate i am a new user of this forum so didn't knew in which section should i place this thread, apologies for that.
From where would i find a stock ROM and how would i flash it(Procedure in detail)?And after flashing this stock ROM would i be able to restore everything using Sprite backup?
Thanks in advance!!
Click to expand...
Click to collapse
Go to the HTC website and download an original ROM from their support page.
Oh and when flashing back to stock, make sure you flash stock rom/radio first, before you remove HardSPL (see guide one post above)

Go to the HTC website and download an original ROM from their support page.
Oh and when flashing back to stock, make sure you flash stock rom/radio first, before you remove HardSPL (see guide one post above)
Click to expand...
Click to collapse
Unfortunately the ROM available on HTC's(3.27.4.3) website is not supported by my phone(The text field after verifying my S/N number prompted that the ROM is not suitable for my phone).What should i do now?Shall i take the risk and give it a go??My only concern is that i don't want to end up with a locked phone after a ROM flash:/
P.S:Apologies for bad grammar.

My phone is Vodafone HTC Touch Pro GSM(Unlocked)

just give it a go. and flash it. you cant really even brick these phones. so your not losing anything. even flash a rom without the sprite backup built in. you can always get the cab

Download rom from sunnysoft, there's no Serial number check in there.

maybe your power button is broken like mine!

D3TH METAL said:
maybe your power button is broken like mine!
Click to expand...
Click to collapse
I doubt it as he can still power off by holding the button down. Sounds like a software problem to me... Is it the same for you with regards to powering off?

[Q] CM7 Not Going Beyond Loading Screen AND Clockworkmod Is Black

A couple of weeks ago I decided to root my phone for the benefits it came with. I did so successfully and had no problems until I decided I'd let my curiosity get the better of me and try flashing CM7 onto my phone. I did so, and everything seemed successful, but I got stuck in a boot loop when I turned on the phone.
I know there are solutions to this, but they all involve either CWM or ADB. Just two problems: I can't use ADB because I forgot to leave USB Debugging on, and I can't seem to get CWM to do anything (it's just a black screen).
There are solutions to all of these problems individually, I know, but each solution relies on at least one of the others to be working. I've been surfing this forum and others like it hoping that someone else would have this problem and would have a solution for me, but I've come up dry.
I used attn1's Ace Hack to root my phone, and then I used Rom Manager to install CM7. Then I hit the loop. Also, my CWM was working prior to CM7.
Does anyone know what I should do?
Thank you in advance,
JW
Inspire 4g
P.S. - I'm new to this forum and don't really know the rules perfectly, so if I did something wrong, then please just let me know what I did and what I should've done. Thank you.

But you can still get in hboot right?

It sounds like you did not choose to wipe data and cache. You always need to do this when changing roms. Best way is to enter cwm yourself and select wipe data/factory reset and wipe dalvik then flash Rom.

Pull you battery for a little bit then try and get into recovery again. If you still can't get in then you will have to reflash your recovery through bootloader.

If all else fails you can use the tool in this link to return to stock. Then re root you phone. genes tool

You can jump into the IRC channel and get some real-time help too:
http://webchat.freenode.net/?channels=#liberatedAria

Gizmoe said:
It sounds like you did not choose to wipe data and cache. You always need to do this when changing roms. Best way is to enter cwm yourself and select wipe data/factory reset and wipe dalvik then flash Rom.
Click to expand...
Click to collapse
No, I didn't think to. To be honest, I saw Rom Manager and thought I would just be able to click on what I wanted and have it ready to play with in a few minutes. I never read what to do before the installation, which was my huge mistake.
Anyhow, I don't think I can get into HBoot. When I turn the phone on with power button and volume button, it vibrates three times, but then it goes to a black screen. I read about this problem with CWM, but the only solutions I saw involved getting into your phone - which I can't do.
So I'm wondering if CWM still works but that it just doesn't show what it's doing. If that's the case, then maybe I could still manage to fix my phone with CWM. Does anyone know if such is the case?

Thank you!
Gizmoe said:
If all else fails you can use the tool in this link to return to stock. Then re root you phone. genes tool
Click to expand...
Click to collapse
Gene Poole said:
You can jump into the IRC channel and get some real-time help too:
http://webchat.freenode.net/?channels=#liberatedAria
Click to expand...
Click to collapse
Thank you both so much for your help! I'm sorry I'm such an ignoramus. Thank you guys!!

JesseWright said:
No, I didn't think to. To be honest, I saw Rom Manager and thought I would just be able to click on what I wanted and have it ready to play with in a few minutes. I never read what to do before the installation, which was my huge mistake.
Anyhow, I don't think I can get into HBoot. When I turn the phone on with power button and volume button, it vibrates three times, but then it goes to a black screen. I read about this problem with CWM, but the only solutions I saw involved getting into your phone - which I can't do.
So I'm wondering if CWM still works but that it just doesn't show what it's doing. If that's the case, then maybe I could still manage to fix my phone with CWM. Does anyone know if such is the case?
Click to expand...
Click to collapse
Sounds like you're holding the vol+ button. You need to be holding vol- when you press power to get to HBOOT. From there you can get into Recovery.

sharksfan7 said:
Sounds like you're holding the vol+ button. You need to be holding vol- when you press power to get to HBOOT. From there you can get into Recovery.
Click to expand...
Click to collapse
this is correct, but you may want to pull out your sd card first. if it still has the pd98img on there,,, its just gonna loop ya. so pull it out before trying, you can always stick it back in once you get to recovery, then select mount> sd card
GOOD LUCK!!