just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
asaf_hermann said:
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
Click to expand...
Click to collapse
Hard reset
how??
i cant turn it on, it stucks at the beginning
asaf_hermann said:
how??
i cant turn it on, it stucks at the beginning
Click to expand...
Click to collapse
The wiki is your friend.
can you please tell me what to do?
asaf_hermann said:
can you please tell me what to do?
Click to expand...
Click to collapse
To perfomr a Hard Reset :-
In this scenario the common solution is to do a hard reset,to do the Hard reset.Press and hold the comm manager button and the voice command button,while keep the two buttons pressed,and at the same time,use the stylus to lightly press and hold the Reset button,the phone will reboot and ask for confirmation,accept it and phone will do a hard reset.check if it helps,otherwise,most probably,its a bad flash or the the extended_rom is corrupted.Reflash the official carrier's rom to clear/correct the extended_rom or reflash the TNT 19209 touchflo ,do this with getting into Bootloaders (Tricolor screen),hope it'll work.
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
ultimate solution is with me
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
naren3108 said:
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
Click to expand...
Click to collapse
Be a sport,don't start posting the same request and offering your service to everybody and in every thread, requesting them to send their phones to you for repair,you know it yourself its not feasible and practical.If you have a genuine solution,why don't you start a new thread and post the procedure alongwith the software you claim you have to revive a phone in this manner,if you honestly intend to help and do a service to the community. According to your name and email ,I presume you are somewhere in India,do you think,its viable to send all the phones from all around the world to you for repair,NO kidding !!! I don't mean any offense towards you though !
asaf_hermann said:
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
Click to expand...
Click to collapse
Activesync will not work in this situation,but if you are able to get into Bootloaders (tricolor screen) its possible to flash a rom,and you don't need to activesync to perform a flash,infact when you start a Rom to flash,it automatically cuts off the activesync all by itself even in the normal condition,so don't worry if the activesync doesn't work now,just try to get into Bootloaders mode and flash a rom.
how can i get into bootloaders mode?
asaf_hermann said:
how can i get into bootloaders mode?
Click to expand...
Click to collapse
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
if everything fails rememer me........but be fast and stop trying all hanky panky things on ur device it can damage it further........
zabardast_1 said:
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
Click to expand...
Click to collapse
yesss.. thanks!! it works!
the bootloader worked.. thank you very much! i really appreciate your work and time that you spend for me. thank you! you saved my phone.
Related
I recently upgraded to ASERG ROM and after that the message 'Press Send to restore factory default' was gone in the bootlader screen in order to hard reste my device.
Currently I have installed the Smart1 v1.3 ROM (it's a great ROM!) and I was hoping to get the message back. But it is still not shown, so I cannot hard reset my device this way.
Can anybody help me with this problem?
Soft reset and try with AKU2.2 again!
Wantoknow said:
Soft reset and try with AKU2.2 again!
Click to expand...
Click to collapse
What do you mean with 'try AKU2.2 again'?
HappyFace said:
What do you mean with 'try AKU2.2 again'?
Click to expand...
Click to collapse
It means ROM Prophet_220734_2207114_24721
you can download RUU_Prophet_220734_2207114_024721_NVID from this link
http://rapidshare.com/files/18507453/RUU_Prophet_220734_2207114_024721_NVID.exe
secoseco said:
you can download RUU_Prophet_220734_2207114_024721_NVID from this link
http://rapidshare.com/files/18507453/RUU_Prophet_220734_2207114_024721_NVID.exe
Click to expand...
Click to collapse
I just flashed my S200 with this ROM, but it did not fix the problem. The message is still not shown.
HappyFace said:
I just flashed my S200 with this ROM, but it did not fix the problem. The message is still not shown.
Click to expand...
Click to collapse
Try to useing another ROM like Jester, If it still not appear, release the battery and do not used the device for 24 hours and try to put the battery again.
owleng said:
Try to useing another ROM like Jester, If it still not appear, release the battery and do not used the device for 24 hours and try to put the battery again.
Click to expand...
Click to collapse
I have tried both solutions, but these did not work also.
Anybody another idea?
dear
just use clear storage program to restore to factory settings default
I think it is hardware problem, the comm manager button has a problem, is it works in windows
try to clean under this button, do it carefully
paradis_pal said:
dear
just use clear storage program to restore to factory settings default
I think it is hardware problem, the comm manager button has a problem, is it works in windows
try to clean under this button, do it carefully
Click to expand...
Click to collapse
I do not think that this is a hardware problem, because I can get into the bootloader screen using the Power and ComMannager button together with the reset. But I do not get the messge and pressing the Send button does not hard reset my device.
dear the bootloader only needs the camera button, I think it is hardware problem just clean the button
HappyFace said:
I do not think that this is a hardware problem, because I can get into the bootloader screen using the Power and ComMannager button together with the reset. But I do not get the messge and pressing the Send button does not hard reset my device.
Click to expand...
Click to collapse
and it is not the power button
Happy Face, you will need to reinstall your last wm5 vendor rom, & then do the 2 step process of the upgrade again.
Use ONLY the nvid file of the 1st step from PDAviet wm6 rom for this part of process:
http://forum.xda-developers.com/showthread.php?t=308266
he did use it, I'm sure his problem is hardware, cause he press the 2 buttons and he goes to the bootloader, it not about the rom it is from the IPL or hardware problem, and I think it is hardware one
plesae does the comm manneger works in windows?
I have used another NVID WM5 and the message (together with the hard reset functionality) is back.
Thank you all!
Guys Help Me.i Need To Brick My Phone.mine One Is G3.my Mini Usb Is Not Working.so If You Guys Can Make Me .cab File Or Simething That Will Brick The Phone.or Any Suggession.if U Make Me A .cab File I'll Copy It In My Storage Card Than I'll Do My Thing.please Guys U R The Gods On Rom.u Guys Sure Cud Do It.speacially Faria.come On Cookers
1. Plug in usb
2. Turn on phone while holding camera button.
3. Flash a different ROM
4. I hope this helps
goofeyass said:
1. Plug in usb<<Did u read bro,i told that my usb is not working.thanks for ur help tho.u tried
2. Turn on phone while holding camera button.
3. Flash a different ROM
4. I hope this helps
Click to expand...
Click to collapse
Plug in usb<<Did u read bro,i told that my usb is not working.thanks for ur help tho.u tried
yes I can read, I was trying to figure out what you were saying. I know there is a language barrier, but damn!! "Guys Help Me.i Need To Brick My Phone"
Why do you want to brick your phone?
you spelled my nickname wrong lol.
OK, first ..i don't want to help you brick your phone before i'm convinced yo cannot repair it instead.
If you want help, please do the following and report back what you have found.
1. Reinstall Active Sync
2. Reboot your PC
3. Turn OFF your phone completly, pull out the battery , insert it back
4. HOLD the CAMERA button and PRESS the turn on button ..it should take few seconds and you should see the BOOTLOADER (3 colour screen)
5. Plug in the USB ... you should hear a short sound and that's it.tho not necessarily.
LEAVE IT LIKE THAT, don't try to turn it on or anything !!!
Next step differs with your phone.
IF YOU HAVE G3
* Start the Rom Upgrade Utility of the T-Mobile 2.26 ROM
IF YOU HAVE A G4
* Start the Rom Upgrade Utility of the Wizard Love Rom
anichillus said:
you spelled my nickname wrong lol.
OK, first ..i don't want to help you brick your phone before i'm convinced yo cannot repair it instead.
If you want help, please do the following and report back what you have found.
1. Reinstall Active Sync
2. Reboot your PC
3. Turn OFF your phone completly, pull out the battery , insert it back
4. HOLD the CAMERA button and PRESS the turn on button ..it should take few seconds and you should see the BOOTLOADER (3 colour screen)
5. Plug in the USB ... you should hear a short sound and that's it.tho not necessarily.
LEAVE IT LIKE THAT, don't try to turn it on or anything !!!
Next step differs with your phone.
IF YOU HAVE G3
* Start the Rom Upgrade Utility of the T-Mobile 2.26 ROM
IF YOU HAVE A G4
* Start the Rom Upgrade Utility of the Wizard Love Rom
Click to expand...
Click to collapse
anichillus my mini usb do not work.that y i'm sending it back.in warrenty hardware part doesnot work.that y i told them my phone is bricked,,,its frezing somthin like that.any alternative idea brother
throw the phone in the toilet...it should brick it easy...
monkey_knight said:
throw the phone in the toilet...it should brick it easy...
Click to expand...
Click to collapse
LOL... That would void the warranty though as they can detect water damage.
I don't know if this will do much, but find the thread on unlocking the extended rom. Then go and screw around with stuff in there (or I think TotalCommander lets you get to it alos and will corrupt it if you try to write to it). Then hardreset your phone. While the main os will be ok, your extended rom won't work to do the phone setups. Not sure if thats enough, but its a thought...
monkey_knight said:
throw the phone in the toilet...it should brick it easy...
Click to expand...
Click to collapse
or u could just flash anichillus' rom it should brick..
.
just try messing up ur ipl spl but if ur with tmobile make up a lie they'll send a new phone
hmm...what happens if you try hard resetting the phone (comm manager, voice recorder + dot on the side) and pull the battery out here and there while it's in the process? maybe that could mess up the os installation or something to get things looked bricked?
or try using wm5torage, make the phone memory writeable, and see if you make it look like the phone is busted...but then again a reset of the phone fixes that solution.
maybe also try overclocking your phone to something high...maybe try to burn out the processor?...keep the phone in warm place at the same time?
alternatively, try banging the phone on the ground a few times...a bit hard...try to put some padding around the screen...but if you bang enough times...maybe the it'll eventually shake something loose from the internals of the phone...
btw, if the mini usb doesn't work, how do you charge the phone anyway?
ANTC said:
or u could just flash anichillus' rom it should brick
Click to expand...
Click to collapse
Haa ?
anichillus said:
Haa ?
Click to expand...
Click to collapse
lol I like how you leave out the smilies lmao
i am using my wifes phone.
Maybe you could be honest with them that the usb doesn't work. thats a hardware malfunction and should be covered
notyourdaddy said:
Maybe you could be honest with them that the usb doesn't work. thats a hardware malfunction and should be covered
Click to expand...
Click to collapse
Unless he has UNLOCKED it!!!! AHHHH!
But seriously if the USB is broke the battery will die... they won't be able to charge it.... they should replace it. Are you worried they will try to repair it?? then just flash your OEM ROM.
Will they check to see if it is UNLOCKED?
it is unlocked.and i already send it.i used total commander.i wiped out half of the windows,,now when i start there is nothin in the menu that shud do it rite?
GOOD Luck!! Let us know how it turns out!!
At the risk of adding to this deception, I don't know of any carrier that even thoroughly checks the phones that come back. Just send it in. You'll get it replaced, I'm sure.
I wanted to switch from PDAVIET 4.0.0.5 to 4.0.0.6. The installation stopped.
After a hard reset, my pda shows me the blue screen with rom numbers and after I have a white screen. I plug it to my pc but active synd does not detect it.
Is there something to do???
flash a provider rom via bootloader modus and then try again!
NetrunnerAT said:
flash a provider rom via bootloader modus and then try again!
Click to expand...
Click to collapse
please explain it better.. same problem..
explain
if I am reading this thread correctly then lol! I know its a noobish problem but it's kinda funny as I had the same on my first WM6 experiments, seems so long ago now!..
(copied from a previous post)
yeah, try turning it off, or remove the battery. Then hold the camera button. Then insert USB. Phone should show bootloader (3colour screen). You can now flash official RUU.
Click to expand...
Click to collapse
btw for official RUU I used "ROMUpdateUtility_NoID.exe" from "Prophet_Orange_UK_ROM" which I I found on the FTP or somewhere here. I think you could use "Prophet_PV_Temp" too but I am not sure
My ROM upgrade freezes at 99%. Please tell me what im doing wrong.
mr.allawi said:
My ROM upgrade freezes at 99%. Please tell me what im doing wrong.
Click to expand...
Click to collapse
If it's a ROM you cooked yourself then it's too large to fit. Otherwise, not sure.
What ROM are you trying to flash?
update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.
I'm gonna say this just to cover all the bases..I'm not sure how long you are waiting but a standard flash can stay at 99% for a LONG time before finally finishing the flash...when they say the flash should take around 10 minutes they are not kidding so I hope you are not just getting impatient.
Merlin_reloaded said:
What ROM are you trying to flash?
Click to expand...
Click to collapse
I have tried all roms, they all have the same problem!
Just wait for it, it stays at 99% for 5 mins sometimes.
it says failed to complete then it shows some recovery.
raj_luvs_frnds said:
update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.
Click to expand...
Click to collapse
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?
mr.allawi said:
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?
Click to expand...
Click to collapse
hold down the record button and comand button at the same time then reset using the stylus (while holding the buttons) then a black screen will appear asking you to press call button to hard reset
for more details you have to visit wiki
It sounds to me like you didnt do much reading before diving into this whole process. If you have a CID locked g4, you will never be able to flash a custom rom with ruu method untill unlocking it.
Should you use shelltool then you will need to wait untill it says it is finished(read all instructions before attempting. They will tell you everything you need to know) If shell tool never gives you the complete message then just let it sit for about half an hour to be safe and then just HARD RESET, NOT SOFT RESET by holding comm manager, voice button and using stylus to reset with the little pin hole.
If you read everythign there is to know about the process and all possibilities, then you will have no problem.
Just read read read... This website is like the rom flashers bible. Everything you need to know is all here. You just have to find it and read it.
Tonight at 12 midnight my phone crashed.
On my screen now all I see is the following message:
This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information please revisit the web site that you used to obtain your current beta release
Click to expand...
Click to collapse
Could this have something to do with the NAFT Rom I was running.
Above the message I see the windows logo in the upper left and then the word Start - but nothing works when I click on those. In addition when I try to sink to my computer it does not connect, so I can not explore using ActiveSync or even going through My computer. I am stumped on what to do?
Any help would be greatly appreciated. Thanks
Same here, Just stopped working a hour and a half ago, (12:00 AM EST 03/01/09)
I am running a custom radio and RRE Fuze Edition.
Same as above. Why the hell do developers even put this **** in.
Guess your having the same problem as the guys with ROMeOS with the 21009 build...
It was leaked so it was beta, and ms put a timebomb in it. You need to install a new rom from bootloader.
I'm not using ROMeOS, I have RRE Fuze Edition. (Well it may be, I frankly don't remember what one it was. Thats what displays on that start)
Is there anyway to not lose my data?
djcaston said:
Guess your having the same problem as the guys with ROMeOS with the 21009 build...
It was leaked so it was beta, and ms put a timebomb in it. You need to install a new rom from bootloader.
Click to expand...
Click to collapse
WHY would NAFT (or anyone else) use the program if this is a possibility?
Can you please explain how to use the bootloader to install new ROM
This is SO frustrating. I am on a business trip!
ragnorok161 said:
I'm not using ROMeOS, I have RRE Fuze Edition. (Well it may be, I frankly don't remember what one it was. Thats what displays on that start)
Is there anyway to not lose my data?
Click to expand...
Click to collapse
Yea what I meant was apparently its also affecting other roms because they all used the same build (21009) in their rom. Anything on your phone is gone. I THINK the sd card is safe
****ing ****, why the hell do devs do that.
Ya SD card is obviously safe, but last time I did a backup was like a month ago (Ya i know...)
God damn this sucks.
TVDinner said:
WHY would NAFT (or anyone else) use the program if this is a possibility?
Can you please explain how to use the bootloader to install new ROM
This is SO frustrating. I am on a business trip!
Click to expand...
Click to collapse
Yea your going to have to install a new ROM buy downloading it and then putting the rom onto the root of your sd card. make sure the rom is RAPHIMG.nbh (and you only need the .NBH) Then hold vol down and reset until the tricolor screen comes up. It'll scan the sd, find the rom, press power button to flash.
Hope it works for you
P.S. dont forget to hard reset when your done!
P.P.S they most likely didn't know that this was a beta build that ms had put a timebomb in. Just another one of the reasons that people should really take the whole "flash at your own risk" thing seriously
djcaston said:
Yea your going to have to install a new ROM buy downloading it and then putting the rom onto the root of your sd card. make sure the rom is RAPHIMG.nbh (and you only need the .NBH) Then hold vol down and reset until the tricolor screen comes up. It'll scan the sd, find the rom, press power button to flash.
Hope it works for you
P.S. dont forget to hard reset when your done!
Click to expand...
Click to collapse
how do I put ROM on the root of my sd card. I can not see the card on my phone because when attached it does not recognize the phone at all.
Hard reset after flashing? How come?
Sorry that im not more technical, ive had this phone for months and yet ive barely messed around.
It's just always recommended to hard-reset after installing a new rom. It's basically to ensure that you won't have any bugs or such.
Make sure you do it at the right time though! Wait until you get to the "Tap screen to setup device" screen. Then hard reset, which in case you didn't know is vol down center button, and reset until the tri color comes up, then vol up to reset
TVDinner said:
how do I put ROM on the root of my sd card. I can not see the card on my phone because when attached it does not recognize the phone at all.
Click to expand...
Click to collapse
you don't have a microsd to sd adapter?
djcaston said:
you don't have a microsd to sd adapter?
Click to expand...
Click to collapse
**** I might. this sucks. WHERE is NAFT to address this?
I have my microSD adapter, it came with mine. But my camera isnt recognizing it so its not appearing on my PC. And I don't have a normal SD connecter, GGRRRRRRRRRRR.
Please refrain from cursing. This isn't a school playground. If this problem persists. Your account will be be suspended for a few days and/or perm banned.
TVDinner said:
**** I might. this sucks. WHERE is NAFT to address this?
Click to expand...
Click to collapse
May not know...I'll hit him up with a PM if his thread isn't already covered in messages like these.
Have you tried a HARD RESET (hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
Havn't tried a hard reset but I guess I might as well, gonna lose everything anyway.
CR7KB24 said:
Have you tried a HARD RESET (hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
Click to expand...
Click to collapse
A hard reset is just most likely just going to result with the user having the same out-of-date rom as he did before, resulting in the same message
TVDinner said:
**** I might. this sucks. WHERE is NAFT to address this?
Click to expand...
Click to collapse
You don't need the adapter. Just put the phone in bootloader mode by turning the phone on while holding the volume up button and flash like you normally do. This is how I usually flash so that I can skip all the activesync junk.
Hope this helps!
CR7KB24 said:
Have you tried a HARD RESET (hold the VOLUME DOWN and ENTER (center) Buttons, press the RESET button with the stylus tip, then release the RESET button but continue to hold the VOLUME DOWN and ENTER buttons until the reset screen appears)
Click to expand...
Click to collapse
what I have done is hard rebooted and reinstalled factory defaults to at least get the phone working. but after coming back up with the default settings, the phone automatically reinstalled NAFT's ROM, which then put me back at the crashed message. going to try again.