Related
Hi everybody,
I made up a new version of pof's USPL for ELFIN based on SPL 2.20.0000. You should be able to flash SPL in the third step now.
Why a new version? Because USPL v1 is only for ELF (64/128MB), but not for ELFIN (128/256MB). Flashing the old ELF SPL in step three on a new ELFIN used to brick your device.
EDIT:
You can find the working release in the following thread:
http://forum.xda-developers.com/showthread.php?p=1964159#post1964159
Thanks to everybody who was willing to test this!
Tempting, tempting.
I still haven't reproduced that weird blue screen i once had on my ELF.
But like i just wrote i got's me an ELF.
Good luck finding resourcefull Gamblers.
If there's no luck just start a Donation round for a Bricked Device Garantee
djvw said:
insane people
Click to expand...
Click to collapse
We have a lot of those in this forum. People trying to flash first and then start reading .
Thanks for trying to get USPL working for the XL users!
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
shael said:
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
Click to expand...
Click to collapse
This is the kind of brave people we need ;-) Please test it and tell us if it's working as soon as you can. Thank you in advance!
Uploaded new version, please redownload in first post.
Nobody has tested this yet?
I think that a Elfin dopod owner can test this without problems, because if don't work he can flash the complete (and signed) dopod rom from bootloader to restore the original SPL...
http://www.dopodasia.com/download/R...7.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe
i have a elfin locked on bootloader screen....can change my spl with this??
what ??? the UPSL 1.0 is for Elf only and not Elfin ??? what i dont understand is what do you guys mean quit at step 3 ??? I flashed my Elfin with UPSL 1.0 with all steps for more than 6 times so far and nothing has happen so far ... my SPL is the 2.20.2000 one ...
@jamezco:
that´s wrong.
You flashed those roms containing the USPL (start.bat). They automaticly quit the 3rd step and go directly to the Rom Utility to flash the new ROM.
If you use POF´s USPL v1 and you don´t quit after step 3, the patched Bootloader will be flashed from your devices RAM to the ROM, and this wil brick your ELFin. If you have done this, your actual IPL or SPL would be 1.11.xxx...
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
we need some thing to unloack direct from boot loader and no need to active sync
as far as i know this is not possible, cause you can´t access bootloader files...in bootloader mode.
same on pc, you can´t delete or replace files, which are open/inuse by another program...
STRAFALCIONE said:
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
Click to expand...
Click to collapse
The Rom Packages u can get here don´t contain a bootloader...and even if they would, the bootloader or the rom would have to match your model ID for flashing it to your device....so yes, it´s stricktly needed to CID unlock to flash Custom ROMs or ROMs with other vendor IDs.
Could someone help me? The USPL is needed for the flashing of ROM, or is it enough the bootloader of the ROM?
Sorry, I missed the answer of the post before
My eyes are crossing after 12 hours in front of the pc
Anyone tested already???
Come on guys,
somebody who can get official Roms from his provider should give this a try...
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
mb286 said:
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
Click to expand...
Click to collapse
You don't see any change in the device.... but if USPL works you can flash ANY rom from bootloader directly executing RomUpdateUyility, you don`t need to boot windows, activesync and white screen (temporary SuperCID) to flash, try.....
Go to RUU directory and execute RomUpdateUtlity instead of RUN.bat and see if you can flash any rom without 3% (corrupted) error....
Hi,
If i have to keep my original ROM as backup to use in case of serious failures, like i am only able to boot up to boot loader and avoid INVALID VENDOR ID (294) error to reflash sucessfully this ROM. (without using USPL)
do i need to do:
1. create part00.raw, part01.raw and part02.raw using pdocread of exiting phone ROM
2. rename .raw files to .nb
3. run Dutty nbh tool and then???
What i have to provide in:
IPL, SPL, First Splash, Second Splash, OS, Ext. ROM, Radio, Device, CID Type, version, langauge, Signature?
4. Produce RRU_Signed.nbh and use it to flash with ROMUpdateUtility
Am i doing right?
Please help!
Thanks in advance
You really don't need to dump your ROM! Most of the official ROMs are available. Tell me your original ROM and I'll give you a link to it!
frauhottelmann,
I asked this because i came across this situation recently when i mistakenly upgraded my HTC S710 ROM with ORANGE UK latest ROM and in last it said corrupeted. After that i tried every things but it got only stuck at boot-loader.
From bootloader, i tried every ROM from FTP xda but everytime it was INVALID VENDOR ID or Corrupt ROM image. and worst part was; i could not use USPL.
If i would have my original ROM with me, i could have come out of this.
I had to pay some bucks in cash to HTC service and then i got it corrected. They simple put my original ROM in it, nothing else.
Thats why i asked if i have to dump my unique ROM to avoid INVALID VENDOR ID, how can i do this?
frauhottelmann,
Sorry to disturb you, can u help me on this?
So do you have an HTC S710 or the Orange version of it?
its HTC S710
And now the original HTC ROMs don't flash properly? I gues the problem was the orange ROM, if you don't flash ROMs other then HTC (or cooked - they don't use an own SPL) then this should not be a problem any more. If you flash a Orange ROM, you still have to do USPL first, because it's gonna say "No, this is no Orange phone" BUt then it still might screw up the SPL and your stuck. So just be carefull with flashing ROMs from an specific carrier.
you mean,
if i have original default HTC S710 ROM in my phone and if i try to flash with original HTC ROM like "HTC S710 ROM version 1.34.405.1" from boot loader then i should not get any error.
Also if i have Gonzo or your ROM or similar cooked ROM and try to flash with "HTC S710 ROM version 1.34.405.1" from bootloader i should not get any error.
if i have Orange or similar ROM and try to flash with any HTC ROM, failure everytime
If it is true, it would still give enough relief.
This is what I meant! The same would happen with a Vodafone or Dopod ROM!
i have the Vodafone V1415 (which is the same as the rest of the vatious Vox's) and i recently flashed an orange rom to it and it worked fine
before the orange rom, i had Mr Gonzos 6.1 v1.1, and before that, whichever one came on the device
ive never come across anything like that :S
admitedly after finally getting everything right (after various problems with different things) and the phone worked fine, i then managed to drop my vox onto a soft seat in such a way that it bounced off and the screen broke as it hit the floot
Original Htc S710 Bt Rom
frauhottelmann said:
You really don't need to dump your ROM! Most of the official ROMs are available. Tell me your original ROM and I'll give you a link to it!
Click to expand...
Click to collapse
Can you kindly show me where to download original BT ROM for HTC S710?
You will save me.
YOSEFE
I see. There is no response to my quest.
I now have to send my phone to my SP, to avoid my dead end experience, how do I backup or do a ROM dump for my original ROM?
Cheers.
Hi Guys
Does anyone that is building roms have the correct ini files which support the Vox in the HTC Rom Tool? The automated download in the application seems to be broken at the moment.
Thanks
You can just use the Excalibur-Setting vor building ROMs for Vox!
By the way, this was written down in the wiki!
I did see that in the wiki and tried it but it looked to be an older version of the kitchen than I am using. My reason for asking was that when using the Excalibur setting the end result was a rom that boots as for as the Windows Mobile screen. Shortly after the screen starts changing in brightness and goes no further.
I never had problems with the excalibur setting. It usually is another mistake that causes the boot to halt!
ok, so you got it finally
this post deals with hardspl, the next one will deal with ROMs
Features:
- this is unsigned Hard-SPL and ignores CID too, so custom roms or dumped & reconstucted roms (and any htc rom update) can flash. but it enforces ATHE400 modelid (I patched it for that). so ATHE***** or ATHE100 roms will be rejected. ATHE400 or ATHE400** is accepted.
- also, this has SPL overwrite protection, so won't accidentally get overwritten. but if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
- if your x7510 gets stuck on booting OS, then I have another way to revert to stock SPL in the cases when warranty is needed, this is a new special feature of the overwrite protection!
Requirements:
- first, if you have x7500 or x7501, then do not flash this.
- to download a compatible hardspl package for x7500/x7501 go to the other Athena subforums.
- also, make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
- finally, if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run x7510_HSPL365.exe
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 3.05-OliNex (3.05 is for SSPL version, the original SPL is 3.05.0000)
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 3.65-OliNex (3.65 is for Hard-SPL version, the original SPL is 3.05.0000).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the camera button (ALL THE WAY IN) then press the reset button with the stylus tip, then release the camera button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-x7510.exe from the SSPL-Manual-x7510.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
NOTE 3: do not use this RUU to flash anything else! this is only intended for flashing SPL's.
NOTE 4: flash stock SPL *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. usage: run the hardspl exe but do not press Next yet then replace the RUU_Signed.NBH with the stock spl NBH (posted here too), then go flash.
enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link).
stock ROMs and flashing utilities
1. customruu for x7510, grab it from attachment. use this to flash roms.
2. nbh building tool for x7510, in another attachment. just choose X7510 from device list to work with it.
3. some stock OS links (some taken from RUU some from dumped / reconstructed roms)
WWE (english) 19209: http://rapidshare.com/files/160439716/x7510_WWE_RUU_Signed_forATHE400.zip
WWE (english) 19217: http://rapidshare.com/files/160431134/x7510_WWE_19217_RUU_Signed_forATHE400.zip
GER (german) 19217: http://www.filedropper.com/x7510gerruusignedforathe400
CHT (taiwan chinese) 19209: http://rapidshare.com/files/159819583/x7510_CHT_RUU_Signed_forATHE400.rar and a mirror http://www.megaupload.com/?d=30L24D8W
NEW: WWE (english) 3.29.707 rom: http://rapidshare.com/files/169675908/x7510_WWE_3_29_707_RUU_Signed.zip
+ extrom for 3.29.707: http://rapidshare.com/files/173043400/3_29_707_extrom.zip
make a mirror for others too please if you can =)
NOTE: I haven't had some of these tested, please let me know if they all work fine
ohh, I also plan to port AP4 to x7510! =) maybe tomorrow.
enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link).
Beautiful work as always.
CMONEX.... I will be your supporter for the next presidential campaign!
Please give us a FULL 3.5 HARD-SPL also for ATHE100 owners, to avoid the AP4 flashing , may be a single 1.2-3.5, with a dialog box to chose between 1,2 and 3.5 partition!
Athena owners Please DONATE to CMONEX, she is doing a really good job for ATHENA, and she never has done a preview of the work to push donation BEFORE the release, she just released the tools, as free gift.
I donate for this tool, even if I am just an ATHE100 owner!
P.S.:
I just receive the paypal statement, it is PAYPAL *WINDOWSCEMO" !!!!
I think this stand for windows CE mod... something, but SCEMO in italian means.... http://www.youtube.com/watch?v=CyOsulfpdY0
CMONEX I agree! Windows IS DUMB!
Hi Cmonex, mine is still fine and stable.
Thanks again for everything you've done for us! I owe you!
yes there'll be a 3.5 standalone package soon for ATHE100. that's one nice idea of bundling both ATHE100 SPL's, I'll remember that when making it
btw that 3.5 SPL has a feature to accept OS of 0x410 NBH type, which was meant as the NBH type for 3.5 SPL ROMs, and that would of course not be accepted/flashed by 1.2 SPL, but that somehow got forgotten , so the SPL 3.5 roms are all still 0x400...
at least this mistake can't be made now for the ATHE400 SPL, the modelid feature is not something that can be forgotten about =P
thanks for the donation, really appreciated
PS: yes my paypal business name is Windows CE Mods - I don't speak italian so forgive me for the choice, hehe.
Thanks a bunch cmonex - hard-SPL flashed successfully on my x7510.
thanks a lot...works fine for me
works
>> in german: http://www.xxacsxx.wg.am/ameo_16gb.html
if you want to build your own rom, please dont forget to put these *.dlls into it. >> http://www.xxacsxx.wg.am/SensorDLLs.zip there are needed for some apps and games, that use the g-sensors.
hi
first thank you cimonex very very much
second links for wwe doesn't work ,both of them.
please fix them.
saied 1 said:
hi
first thank you cimonex very very much
second links for wwe doesn't work ,both of them.
please fix them.
Click to expand...
Click to collapse
yeah I see the problem, it wasn't uploaded with collector account stupid rapidshare... will fix it soon
EDIT: fixed, again new links, now should be working longer
hoho
..........
xiumutou said:
hoho
..........
Click to expand...
Click to collapse
hoho means? sorry I don't understand..
it`s christmas time
Brilliant work...your USD200 is on its way...will try this when I get home later!
Cheers
OOOOOOOHHHHHHHH!!!!!!! Incredible! xDDDDD Thanks, thanks, thanks!
Now i'll begin to read and try to find HOW can i make an Spanish ROM for the x7510.. First of all i think a i need an original Spanish Rom no?
any idea of where to find it?
then i'll begin to read on how to make my rom.
Thanks!
Calcu said:
Now i'll begin to read and try to find HOW can i make an Spanish ROM for the x7510.. First of all i think a i need an original Spanish Rom no?
any idea of where to find it?
Click to expand...
Click to collapse
I uploaded the original Spanish ROM (dumped) sometime ago. You can find it in this post: http://forum.xda-developers.com/showpost.php?p=2509550&postcount=60
i've dumped myself this spanish rom (i've an spanish x7510 xD) but someone told me that we need "the original" rom not a dumped one...
I have flashed both versions of WWE x7510 posted on this thread. Both of them show the same specs on settings "about" and "device info".Has anyone comfirmed this?Even the rom date is the same.Also I have flashed the WWE clean rom of xacsx and still the same.And it is natural because he has used the same stock rom posted here.Cmonex maybe u have done a mistake and have uploaded the same file(?)Please check it out because the result will be tha we once we make a mistake we will make another one based on the first one like the clean WWE rom of xacsx if of course I am right.Thanx
cmonex said:
yes there'll be a 3.5 standalone package soon for ATHE100. that's one nice idea of bundling both ATHE100 SPL's, I'll remember that when making it
btw that 3.5 SPL has a feature to accept OS of 0x410 NBH type, which was meant as the NBH type for 3.5 SPL ROMs, and that would of course not be accepted/flashed by 1.2 SPL, but that somehow got forgotten , so the SPL 3.5 roms are all still 0x400...
at least this mistake can't be made now for the ATHE400 SPL, the modelid feature is not something that can be forgotten about =P
thanks for the donation, really appreciated
PS: yes my paypal business name is Windows CE Mods - I don't speak italian so forgive me for the choice, hehe.
Click to expand...
Click to collapse
Hi, CMONEX, Just sent you a donation. No: 5V8929312W355302M.
Bit late, as I was off for some time.
Could you give some info about how to use your tool to prepare our own ROM? What tool/kitchen can we use to mode the rom? Can it be Sogarth's kitchen, for example. If so then how to extract proper XIP for Athe400? Maybe my questions are not too good, but I am kind of noob in preparing roms.
Hello,
I have juz download the NBH file for WinMo6.5 for Touch Viva.. can any one tell me extactly how to install this stuff...i googled a lot...but din't get any straight info...i only have the 28002_ruu_signed.nbh file.
Thank You.
Welcome aboard
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Opal
you´ll find all you need.
Good luck,
Thank you
thank you...let me check..today on leave...so got enuf time to upgrade my Viva
no luck
nop man...i found nothing there about how to install an .NBH file...it juz gives the product spec and diferent ways for resetting the device.. wht i am looking for is a step by step info on how to upgrade my ROM using this RUU.NBH file...any help??
Have a look here:
http://forum.xda-developers.com/showthread.php?t=441870
And then here:
http://forum.xda-developers.com/forumdisplay.php?f=444
Hope it helps,
Thank you again
i have download the CustomRUU tool..thanks...one more question..the tool shows tht my existing version is 1.35.xxx and the image version to that i have downloaded is 1.27.xxx..
is tht a problem..i am having WinMo 6.1 Pro on my device..and this downloaded image file is WinMo 6.5.
error
n now i got an ERROR 270..says the image is corrupted...i tried download 3 times...nething like the device is locked or somthing...whn i turn on my device..its show ONBL, SPL and OS version 1.35.0000
did you Hard-SPL your Opal before flashing with custom roms?
http://forum.xda-developers.com/showthread.php?t=446446
still confused
hello,
thanx for your support. But can u give me a brief about the flashing processes..i mean the SPL and hardspl and bried step by step info..plz..
Thank You
Razeen Abdulla
flashing is quite easy, after connecting via ActiveSync... double click ROMUpdateUtility.exe and follow the on-screen directions... that's it.
if you want custom roms, you have to Hard-SPL your device first. you won't be able to flash your device with custom roms (cooked) if it's not Hard-SPLed but you can flash it with NON-custom roms (roms that are downloadable from HTC websites).