Database Info

Where is the latest Faria's Rom ?

Hi, I tried for many times to update my qtek 9100 with some of farias rom, as the last I tried, farias [the real thing], without any good results... The only one that is working now on my phone is Wizard love.
Someone knows where to find the last issue ?
Thanks,
Christian
Brazil
Qtek9100

I thought faria's the real thing was the latest faria rom... Oh and how are you trying to flash the rom and is your device a G3 or G4?
If your device is a G3(1.xx or 2.xx or 3.08) then you will need to CID unlock the device before you can flash anything with RUU
If the device is a G4(2.xx.0001) then you have 2 options. You can either use shelltools to flash, or use the-equinox's new SoftSPL which temporarily CID unlocks the device thus not voiding your warranty and allows you to flash any rom with RUU.
This is the link to what I believe is faria's latest rom: http://forum.xda-developers.com/showthread.php?t=297762

Thanks for your reply.
I guess you are right, the last version was crossbow, but I found many of them on a ftp (ftp://130.89.126.174:2311/Wizard/Roms/WM6 Roms/), and this is the last reference I guess.
06/08/2007 01:21 Directory Crossbow Reloaded 1.7.1
I tryed two methods.
Fisrt, using the package application utility.
Second, using shelltools, uploading the .nbf file.
My device is a G4, and as far as i read I dont see any issues on upgrading using CID-lock devide.
When I flash using shelltools, Do I need to clean the current device rom, or just send the new one should work ?!
Before flash I did a backup using wizard service tool, and it generates some files with .fls extensions. Is it possible to put then back in order to have my phone to the original state ?
And the last question ( )
Temporary unlocking using your suggestion (SoftSPL) could damage something if the process kill before ends ?
Thanks for your time, answering that.
The major of xda posts says, Ask before !!!!
Regards,
Christian

Follow THIS tutorial, you'll do fine.
Post any questions related there, there's no need for new threads.
Thank You.

Latest Latest Rom
To be completely accurate, Faria's latest latest ROM is in the kitchen he released (sticky at the top of this forum). This is a minor upgrade to the Real Thing ROM, but is worth checking out, plus its a great way to get started with cooking your own rom.

chrispaiva said:
Thanks for your reply.
I guess you are right, the last version was crossbow, but I found many of them on a ftp (ftp://130.89.126.174:2311/Wizard/Roms/WM6 Roms/), and this is the last reference I guess.
06/08/2007 01:21 Directory Crossbow Reloaded 1.7.1
I tryed two methods.
Fisrt, using the package application utility.
Second, using shelltools, uploading the .nbf file.
My device is a G4, and as far as i read I dont see any issues on upgrading using CID-lock devide.
When I flash using shelltools, Do I need to clean the current device rom, or just send the new one should work ?!
Before flash I did a backup using wizard service tool, and it generates some files with .fls extensions. Is it possible to put then back in order to have my phone to the original state ?
And the last question ( )
Temporary unlocking using your suggestion (SoftSPL) could damage something if the process kill before ends ?
Thanks for your time, answering that.
The major of xda posts says, Ask before !!!!
Regards,
Christian
Click to expand...
Click to collapse
Give this a try. It temporarily CID unlocks your G4 device allowing you to upgrade via RUU method instead of shelltools. It is much more effective at flashing roms as I was never able to flash faria's rom with shelltools but it finished after 6 minutes with the RUU.
Check this thread out

Thanks all for the prompt response.
I did the process using sspl, and for the first time I could get to the final process....
Thanks a lot,
Christian

Faria's most recent ROM
The Faria kitchen was released on 4/20/07....
but Dr Puttingham mentions in this post:
http://forum.xda-developers.com/showthread.php?t=310816
that this more recent ROM is from Faria "with regards".....which was on 6/7/07
I'm a big fan of Faria's ROMs and Dr Puttinghams instructions/tutorials!

Three Russian ROM from Damp

I have made three Russian ROM from Damped ROM v. 1.22.411.1
The first contains:
- OS without changes
- Black mainsplash
- radio from Arabian ROM
http://rapidshare.com/files/625681...duemonocle_1.22.411.1_4.1.13.47_02.98.90.rar
The second contains:
- Completely changed the screen of loading
- Has replaced the standard calculator on CalcOne.
- Has removed unnecessary pictures, etc.
http://rapidshare.com/files/630354...lack_V_1.0_1.22.411.1_4.1.13.47_02.98.90.rar
The third same as the second, without Office and Windows Live
http://rapidshare.com/files/630382...lack_V_1.1_1.22.411.1_4.1.13.47_02.98.90.rar
To establish only after updating USPL

Congratulations!!
Finaly someone made it!!
I was trying to do my own cooked rom but I fail. I was trying to get OS.nb from Part02.raw from dump (from other rom), but during process of converting, packages are lost and when I flash device with that I get plain vanilla rom without ANY customization. Simply, none of .provxml files are procesed during cold boot. That`s not what I want.
Any idea what went wrong?
Anyway, I see that you used Htc rom tool by Dark Simpson with Excalibur option to get .nbh file, is that correct??

anyone try and flash yet?
i would like to try but i don't want to brick my Vox.

Elisha said:
anyone try and flash yet?
i would like to try but i don't want to brick my Vox.
Click to expand...
Click to collapse
I just made some tests and will risk saying, yes it`s safe to flash it.
But before flashing, run VOX_USPL <----- It`s very important, even if your device is SuperCIDed, just to be safer.

the rom is 1.22 and the USPL is 1.16?
is there any major improvements over 1.15?
is it even worth flashing?
my VOX is factory unlocked btw.

Elisha said:
the rom is 1.22 and the USPL is 1.16?
is there any major improvements over 1.15?
is it even worth flashing?
my VOX is factory unlocked btw.
Click to expand...
Click to collapse
Read this: Vox USPL

i know of that USPL.......my question is that that didn't look like it gave much of a benefit.
and since my phone is factory unlocked again.....what does this 1.22 ROM offer?

Elisha said:
i know of that USPL.......my question is that that didn't look like it gave much of a benefit.
and since my phone is factory unlocked again.....what does this 1.22 ROM offer?
Click to expand...
Click to collapse
More stable, and I think nothing more. I`m sure, your phone is sim-lock factory unlocked, but not a cid unlocked. None of providers or htc provide cid unlock phones.

is it more efficient in the sense that i will have more available free memory at startup?
i have about 23mb usable and fresh startup now!

does this rom have english language? i'm asking because i'm not russian so i don't understand cyrilic, hence i wouldn't understand anything ;P ...and one other question, because i've never flashed my vox: can i, for any reason, flash my vox with another rom, of a previous version than this rom, if i choose to??

This ROM contains two languages: Russian and English.
You can flashing any ROM after flashing VOX USPL.

ok thank you very much for elucidating me

one other question: i've flashed with your rom, but now i have an issue: my qwerty keyboard as a different layout than the one the rom has...my keyboard as the dot next to the P...this layout as the dot next to the Q...consequently the first line of the keyboard is one position shifted to the right...what can i do about it? is there some key in the registry taht i could change?

never mind i already solved my problem...but jesus what i had to do to get through it :S
to anybody that could have been through the same issue as i did:
http://www.modaco.com/content/Smart...obile-Smartphone-Internationalization-Issues/
http://www.microsoft.com/globaldev/reference/winxp/xp-lcid.mspx
also check the registry key in \HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD
and change it acordingly with your language code (check the second link for the code)

Really QWERTY keyboards in Russian and English devices differ.
Try to replace a file T9.Libra.russian.0409.kmap.txt in \Windows, on what I apply.
I do not guarantee, that it will solve a problem.
Look also here and here.

Thank you for your rom. My orange sp e650 is really faster when accessing programs and there is more storage left on the phone I like it
And thanks goes to carrots99 too for pointing to this excellent article from Menneisyys. It really helped me putting french language back but I still had to do a lot of editing in the txt file.

Any chance of some screen shots?

Sure. What screenshots would you like ?
I have a small request also. It seems that this rom doesn't support custom animated splash screens in HKLM\Software\HTC\Startup (or \Shutdown)
Could someone please give me the values listed here ? I think a dll was registered here ...

for the animated startup and shutdown screens you have to check the registry for this:
[HKEY_LOCAL_MACHINE\System\Startup\1]
"Dll"="\Windows\oemstartup.dll"
[HKEY_LOCAL_MACHINE\System\Shutdown\1]
"Dll"="\windows\oemstartup.dll"
you need also to check if you have that dll file in windows folder

That's it ! This dll is not included in this rom. My only complaint actually. Any chance you could upload it for me ?

[UPG]USPL for ELFIN - Only for the brave ones

Hi everybody,
I made up a new version of pof's USPL for ELFIN based on SPL 2.20.0000. You should be able to flash SPL in the third step now.
Why a new version? Because USPL v1 is only for ELF (64/128MB), but not for ELFIN (128/256MB). Flashing the old ELF SPL in step three on a new ELFIN used to brick your device.
EDIT:
You can find the working release in the following thread:
http://forum.xda-developers.com/showthread.php?p=1964159#post1964159
Thanks to everybody who was willing to test this!

Tempting, tempting.
I still haven't reproduced that weird blue screen i once had on my ELF.
But like i just wrote i got's me an ELF.
Good luck finding resourcefull Gamblers.
If there's no luck just start a Donation round for a Bricked Device Garantee

djvw said:
insane people
Click to expand...
Click to collapse
We have a lot of those in this forum. People trying to flash first and then start reading .
Thanks for trying to get USPL working for the XL users!

ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers

shael said:
ummmmm i just used to use the old uspl v1 and exit after step 3 than flash my rom, if you guys are really keen on testing this my new elfin will be here today or on monday and i will try it with my old one just to piss of rogers
Click to expand...
Click to collapse
This is the kind of brave people we need ;-) Please test it and tell us if it's working as soon as you can. Thank you in advance!

Uploaded new version, please redownload in first post.

Nobody has tested this yet?
I think that a Elfin dopod owner can test this without problems, because if don't work he can flash the complete (and signed) dopod rom from bootloader to restore the original SPL...
http://www.dopodasia.com/download/R...7.1B_4.1.13.51_03.07.90_BLUE_Ship_Reduced.exe

i have a elfin locked on bootloader screen....can change my spl with this??

what ??? the UPSL 1.0 is for Elf only and not Elfin ??? what i dont understand is what do you guys mean quit at step 3 ??? I flashed my Elfin with UPSL 1.0 with all steps for more than 6 times so far and nothing has happen so far ... my SPL is the 2.20.2000 one ...

@jamezco:
that´s wrong.
You flashed those roms containing the USPL (start.bat). They automaticly quit the 3rd step and go directly to the Rom Utility to flash the new ROM.
If you use POF´s USPL v1 and you don´t quit after step 3, the patched Bootloader will be flashed from your devices RAM to the ROM, and this wil brick your ELFin. If you have done this, your actual IPL or SPL would be 1.11.xxx...

Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?

we need some thing to unloack direct from boot loader and no need to active sync

as far as i know this is not possible, cause you can´t access bootloader files...in bootloader mode.
same on pc, you can´t delete or replace files, which are open/inuse by another program...

STRAFALCIONE said:
Sorry: could someone explain me whether it is strictly needed to use the USPL unlock (the one are treated in this post) to flash the PDA?
I mean: the bootloader in the rom package is not able to do that?
Click to expand...
Click to collapse
The Rom Packages u can get here don´t contain a bootloader...and even if they would, the bootloader or the rom would have to match your model ID for flashing it to your device....so yes, it´s stricktly needed to CID unlock to flash Custom ROMs or ROMs with other vendor IDs.

Could someone help me? The USPL is needed for the flashing of ROM, or is it enough the bootloader of the ROM?

Sorry, I missed the answer of the post before
My eyes are crossing after 12 hours in front of the pc

Anyone tested already???

Come on guys,
somebody who can get official Roms from his provider should give this a try...

Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..

mb286 said:
Hi all, not that i think myself insane but i have tried the USPL for my Elfin 128/256 Touch a few days ago . I have followed the steps and the screen turned white as mentioned by the installer after that it booted up fine again.
Everything seems to be working fine!
However, i have not seen any change to the device..
Click to expand...
Click to collapse
You don't see any change in the device.... but if USPL works you can flash ANY rom from bootloader directly executing RomUpdateUyility, you don`t need to boot windows, activesync and white screen (temporary SuperCID) to flash, try.....
Go to RUU directory and execute RomUpdateUtlity instead of RUN.bat and see if you can flash any rom without 3% (corrupted) error....

HardSPL v3.07, v3.28, v3.29 and v3.56 by JockyW

Many of you are eagerly waiting for this: HardSPL v3.07, v3.28, v3.29 and v3.56...
Run a SSPL (aka JumpSPL) and then flash the HardSPL.
Practically all questions are answered in kyphur's excellent F.A.Q. in the next post
Brought to you by JockyW
Have fun !
EDIT:
* The "force USB" versions are only for a tiny minority who have USB connectivity issues.
* SPL3.56 is part of the latest AT&T Rom which is dated June 6. 2008
* SPL3.07 was included in a recent Vodafone RUU.

F.A.Q.
How to Install 3.2x.Hard SPL:
1. Plug the device into your PC
2. Copy Jump/Soft to your device. use JumpSPL If you have the "White Screen" issue, if you don't, you can use SSPL-KAIS.exe.
3. Take out your SD card & SIM Card.
4. Run Jump/Soft SPL on your device
5. Wait for the bootloader screen to appear and "USB" to show.
6. Right-click activesync, go into connection settings and ensure Allow USB Connections is unchecked
7. Unplug your device from the USB port, wait 5 - 20 seconds, plug it back in.
8. Run KaiserCustomRUU.exe and flash the SPL
If you have problems with the above process, try this:
1a. download the attached files
1b. pull out the battery and reinsert it (this step *is* important)
1c. connect your PC to phone with a USB cable
2. REMOVE SIM and SD CARDS !!
3. copy JumpSPL1.56-KAIS.exe to your device and run it (make sure the USB cable is still connected). If you still get a white screen then reset your device and now try JumpSPL1.93-KAIS.exe or JumpSPL1.94-KAIS.exe
4. after a few seconds "USB" appears on the phone display
5. unplug and replug the usb cable
6. deselect "Allow USB connections" in Activesync connection settings
7. now flash hardSPL (run KaiserCustomRUU.exe from flash-hardSPL.zip on your PC)
Notes:
With the JumpSPL you should *not* flash radio roms, OS roms or full roms. The JumpSPL is only needed to flash a HardSPL (or SPL)
FOR ANYONE WITH QUESTIONS ABOUT WHAT THIS IS FOR, WHY YOU WOULD NEED IT, OR HOW TO PERFORM SPL PROCEDURES: Read This Wiki page
Q: Can I use with with Wizard/Hermes/"Insert other device here"?
A: No, this is only for Kaiser/TyTN2/Tilts.
Q: Do I have to use Jump/Soft SPL?
A: Yes.
Q: Do I have to install HardSPL v1.x before installing HardSPL 3.x?
A: No, you can follow this process to install HardSPL 3.x on a factory device without ever installing HardSPL 1.x.
Q: Will I have to reflash my OS/Radio or set-up my software again after flashing this?
A: No, changing SPL doesn't touch either the Radio or OS.
Q: Do I have to use this BEFORE I flash a WM 6.1 Rom?
A: Not really, you can flash it before or after upgrading the OS/Radio to WM 6.1 but you may experience "Screen-Freeze" until you upgrade your HardSPL.
Q: Since this is SPL for HTC Branded Devices will it work with AT&T's Tilt?
A: Yes.
Q: Does this SPL support AT Command Mode?
A: No.
Q: Does the 3.2x HardSPL support "Task 2a" via MTTY?
A: No, HTC took it out.
Q: What is the difference between this & HardSPL v1.x?
A: HardSPL 3.x should be used with WM 6.1 Roms, HardSPL 1.x should be used with WM 6.0 Roms. Both HardSPL prevent you from accidently flashing a new SPL (you must use Jump/Soft SPL for this) and SuperCID your phone.
Q: What is the difference between 3.28 & 3.29 SPL?
A: Just speculation at the moment but there appears to be a minor change, possibly a hotfix. Both SPLs seem to work fine with all models & WM 6.1 Roms but 3.29 is included in the AT&T Rom and a few of the HTC Roms.
Q: Should I install 3.28 or 3.29?
A: Honestly it probably makes little difference but you can always check the SPL that shipped with the rom (or BaseRom if using a cooked Rom) you are running. I have AT&T Tilt running my Rom (using AT&T 3.51 Base) with 3.28 and have no problems including screen-freeze. Note: some members recommend 3.28 for HTC Roms & 3.29 for AT&T Roms.
Q: Does this HardSPL fix the "Screen-Freeze" in WM 6.1 Roms.
A: Yes, everyone using the new HardSPLs has reported it resolved the issue.
Q: What about WM 6.0 Roms?
A: Some users have reported having the "Screen-Freeze" issue on WM 6.0 Roms and fixing it with the New HardSPL. It's worth a try but definately recommended to use the same generation SPL & ROM in most cases.
Q: What about "Diamond" Roms?
A: As the Diamond Ports are WM 6.1 Roms and the SPL has the same effect, eliminates "Screen-Freeze".
Q: What was the cause of the freezings with the older hard-spl and what did you do to fix this
A: SPL initializes a lot of subsystems (power management, touch screen, lcd, etc). The newer SPL probably has contidional code that would handle variations in hardware (if they exist). I'd also think that the 3rd gen SPL would be geared more towards the 3rd gen OS & Radio needs which would explain the fix working as well as it does. Reminds me of the Wizards days when we were running 2nd & 3rd gen OS but had to stick to lower radios because we were intentionally not upgrading SPL (due to HTC Locks & such in the 2nd gen SPL).
Q: Can I flash this via SDCard?
A: Technically, you should be able to BUT flashing SPL is a "dangerous" process for your phone so you really should use KaiserCustomRUU.
Q: Where can I get Jump/Soft SPL?
A: http://forum.xda-developers.com/showthread.php?t=354061
Q: I can't flash a cooked Rom after installing 3.x.Hard SPL, help.
A: See the next question, if you didn't successfully change to SPL03.2x.Hard then try again.
Q: How can I be sure that I've successfully changed to SPL-3.x.Hard?
A: Get into your Bootloader (hold down camera+power buttons while inserting stylus for approximately 3-5 seconds). It should show SPL-3.28.Hard or SPL-3.29.Hard on the second line of text on your screen. If not then you didn't flash the new HardSPL, try again.
Q: Using Jump/Soft SPL shows "unknown device" when hooked up to usb.
A: Try the SSPL attached to the first post.
Q: Could you clarify what the "Force USB" does?
A: Some users managed to nuke configuration parameters which determine the default connection mode. They are stuck in serial mode. The "force usb" version of SPL corrects this. Of course it would be better to figure out which parameter(s) are at fault and correct these, but that would take time and experiments and more over a higher risk to really brick a device.
Q: I'm stuck in the Bootloader (Tri-Color) Screen with "ruunbh" text in the upper right corner.
A: To get rid of the RUNNBH error:
Download an ORIGINAL (not cooked ROM) for your device from here: http://wiki.xda-developers.com/index...me=Kaiser_ROMs
Choose one appropriate for your device (AT&T tilt / HTC TyTnII). 6.0 or 6.1 shouldn't matter.
Download that and flash it...it should work and get you back to a working phone. Then you will have to try the HardSPL procedure again.
Q: Does this "Security Unlock" my Phone?
A: No, Security Unlocked is something different from HardSPL.
Check here on how to do a security unlock: http://forum.xda-developers.com/showthread.php?t=361236
Here are the files that you will need to do the process:
http://www.4shared.com/file/46447471/7ae96b57/Jockyw2001_HardSPL_-_SuperCID.html
Just follow the steps in the supercid. I have included the .txt file that Jockyw2001 included.
Be sure to flash the "SPL-1.1.JockyW" as the process won't work while SPL-3.2x.Hard is installed.
Q: Where did my post in this thread go?
A: All useful information was consilidated into this single post. Everything else was deleted.
Troubleshooting:
When all else fails, try these...
Use a Windows XP Machine (not VISTA).
Delete all USB peripherals and root hubs from Device Manager, reboot, let everything be re-detected, reboot again and then plug your Tilt in again.
Make sure you have removed both the SDCard and your SIM Card.

HardSPL v3.29.0000 added
HardSPL v3.29.0000 added.
I don't know which one is better. The version number tells me that they prolly hotfixed an error in 3.28.
Enjoy!

hey Jocky! I kinda miss the SPL-1.1.JockyW tag in your SPL, lol.. donation coming in as promised!
Confirmation number: 6CM53141XF789163M

pfcsabre said:
hey Jocky! I kinda miss the SPL-1.1.JockyW tag in your SPL, lol.. donation coming in as promised!
Confirmation number: 6CM53141XF789163M
Click to expand...
Click to collapse
Thanks! First donation from 'old europe'

Work worthy of donation!!
New SPL has done the trick and eliminated the laggy freezes in L26 v3 for me!
Many thanks jocky......worthy of the small donation (Paypal Confirmation number: 99A446736N006110A) that I can afford and great stuff!

FAQ Updated, thread cleaned...
I'll be leaving Kudos, Donation notices & such after this but all Question/ Answers will get cleaned & integrated into the FAQ.
BTW, Jocky had mentioned that North America as consistantly been the lion's share of support for his work . I do encourage everyone who uses this to send a little something his way as it does take both time & skill to provide these tools. Even a couple of bucks goes a long way to show your appreciation.

kyphur said:
I'll be leaving Kudos, Donation notices & such after this but all Question/ Answers will get cleaned & integrated into the FAQ.
BTW, Jocky had mentioned that North America as consistantly been the lion's share of support for his work . I do encourage everyone who uses this to send a little something his way as it does take both time & skill to provide these tools. Even a couple of bucks goes a long way to show your appreciation.
Click to expand...
Click to collapse
Chaulk another one up for North America, donation sent, thanks Jocky!!!
Confirmation number: 7YH40824J6586891R

Donations
Just making sure N. America stay on top!

Nightly Thread Maintenance.
FAQ Updated....
Posts removed....

it worked!
worked without any issues...i did the 3.29 on dutty rom even doh i should do htc but reviews show little difference and i have att phone ... reponse is slight better i know for sure...but not AMAZING like people saying...will keep u updated!

Seems like Kyphur is a bit fast on the delete button
Anywhoo, just wanted to re-post that I've sent a small donation off to JockyW.
Unique Transaction ID #56B84509V76451713
Thanks for everything and keep up the great work!

_Alex_ said:
Seems like Kyphur is a bit fast on the delete button
Anywhoo, just wanted to re-post that I've sent a small donation off to JockyW.
Unique Transaction ID #56B84509V76451713
Thanks for everything and keep up the great work!
Click to expand...
Click to collapse
Hehe...Kypher would it be better to just lock this thread?
Mass deleting posts just doesn't sit well with me either.
probably less work for you too.
your call

Thanks, worked well as well. Now no freezes.

Kudos to kyphur for perfect moderation and orchestration of this thread and to all who donated of course. The fact that nearly all donations are from north-america is prolly because these SPLs are solving the AT&T rom issues.
Whatever, I appreciate it!

Yeah great work!! sure to donate..
It works like a charm. Happy to donate.
From the Netherlands 4M744925453729221

gqstatus0685 said:
Ok what I show is:
KAIS*0 MFG
SPL-1.0.0liPof
CPLD-8
I installed this L26 diamond V5 onto my device and it says includes newest version 3.29. Freezes like crazy and very annoying. I know it's fixable.
Click to expand...
Click to collapse
You didn't successfully install 3.2x.Hard SPL, you're still on the 1.0 version.
Try again, read the FAQ carefully, everything you need is (should) be there.

gqstatus0685 said:
Ok what I show is:
KAIS*0 MFG
SPL-1.0.0liPof
CPLD-8
I installed this L26 diamond V5 onto my device and it says includes newest version 3.29. Freezes like crazy and very annoying. I know it's fixable.
Click to expand...
Click to collapse
Your bootloader screen should show:
KAIS100
SPL-3.28.Hard
CPLD-8
or SPL-3.29.Hard if you've used 3.29.

Donation made!
confirmation nr. 9A097724M3643491F

Has anyone successfully flashed via microsd? My USB port has been dead for awhile now.
I'd like to fix my freezing problems.

[UPG] READ BEFORE FLASHING! Hard-SPL 2.28/3.10/etc - yes with overwrite protection :)

well so finally here's a real hardspl =)
it's based on USPL's - new feature is overwrite protection. so devices won't get bricked if flashing a full shipped rom. the version after flashing this will be "xx.xx.cmon" (ending in cmon).
btw, this uses same CID patches as the 3.07 USPL made by htctouchp but i removed modelid patch after determining it wasn't necessary (makes it safer by not allowing to flash other devices' roms).
also thanks to htctouchp for testing this hardspl.
NOTE that shipped roms with SPL.NBH included will fail to flash until the SPL.NBH is removed (in the past this would have resulted in a brick, now hardspl protects you from this).
also, all these hardspl's include the size patch to allow flashing smaller images via RUU!
usage: download from attachment, flash with pof sspl, enjoy
or if you already have some version of uspl, then just use that to update straight to hardspl. (but after installing hardspl you will always have to use sspl if you want to change spl version, see detailed instructions below.)
more detailed instructions:
this is to flash any SPL: either update to hardspl this way or flash another spl over hardspl. (copied from other post)
0. make sure your device is synced to activesync!!
1. Run the elf-uspl.exe from ELF_USPL_2.26.0000.zip
2. Watch Screen and Press Enter When Asked.
3. Screen should Jump to White on Phone and on PC Flashing Loading Bar will Show.
4. Stuck in Black Ducky Loading Screen?, check Active Sync Connection or Do a hard reset on Phone first. But be sure to do the last Actual Flashing in White Screen. Sometimes this needs a few tries to go through white screen.
5. Done.
UPDATE: 2.26 and 2.28 hardspl's: 2.28 is best if 3.x versions don't seem to work on your device. very stable because it seemed to work on any elf/elfin so far.
...get them from attachments in this post,
and thanks to htctouchp (Aman) for saving me time by editing these!
UPDATE: 3.10 HSPL: Aman found a new SPL update and ported my hacks to it, thanks attached to this post too.
UPDATE: 3.14 HSPL: Aman found yet another new SPL update and again ported my hacks to it; newest attachment in this post. new feature: cool picture while device is charging!! if you don't like the idea of the device being on in bootloader when it's not in use just charging the battery, you can stick to 3.10 or 2.28.
[SIZE=+2]IMPORTANT: 2.26 and 2.28 are for both Elf and Elfin, but 3.07 and 3.10/3.14 sometimes don't work on 64mb Elf so if you have that device, test with USPL version first[/SIZE]
still, if you've managed to flash the wrong version, then to unbrick, see for now: http://forum.xda-developers.com/showpost.php?p=3395787&postcount=155
[SIZE=+2]IMPORTANT 2:[/SIZE] [SIZE=+2]3.14 can Cause Larger Battery Drain then expected.[/SIZE]
Further Plans When I Get The Time:
- better integration of SSPL loader, and check included to prevent 3.xx installing on Elf's
- user friendly unbricking
finally, donations are always appreciated to "To Cmonex" link in my signature

Nice Work - do you ever sleep
I'll sticky this for you cmonex.
Dave

let me be the 1st one to say
THANK YOU
you are the best!! simply the best

Thank You
kokotas said:
7. CID Unlock your phone
...
(4) Elf&Elfin HardSPL (Not available yet)
...
Click to expand...
Click to collapse
Always wanted to change the above statement in the RollUp...
You made it true!
Thanx!

will wonders never cease. finally a hardSPL. thankx a lot bro...

I Wish I had this Before I tried To Flash The New 6.1 Rom LOL -
Had To Use the Goldcard to method to unbrick. Well At least I unbricked it And now I wont have to worry about that again thanks to this

Last night I stack at tricolor screen. can this help me and how? Sorry I'm new here.

cmonex said:
well so finally here's a real hardspl =)
it's based on 3.07 -..
finally, donations are always appreciated to "To Cmonex" link in my signature
Click to expand...
Click to collapse
Thenx

Thanks cmonex for this HardSPL...
malintzin said:
Last night I stack at tricolor screen. can this help me and how? Sorry I'm new here.
Click to expand...
Click to collapse
No sorry it's too late.
but try the gold card unbriker

But Wont This Lock Your SPL
So If You Want To Update To A Older Or Newer SPL Then You Wont Be Able To Please Let Me Know Cause I Justed Used This And I Tried To Down grade the SPL and I Was Unable To

Thank you so much cmonex! what would we (or at least I) do without you and Olipro!

RaffieKol said:
But Wont This Lock Your SPL
So If You Want To Update To A Older Or Newer SPL Then You Wont Be Able To Please Let Me Know Cause I Justed Used This And I Tried To Down grade the SPL and I Was Unable To
Click to expand...
Click to collapse
as mentioned by cmonex, u need to use SSPL to flash another SPL i.e. elf-uspl.exe, the white screen method, which u were using before to flash the USPLs.

AWESOME work C!! once again the legend of PPC hacking strikes back
Wish I still had my ElfIn, would had been so much fun still cooking for this device now

ababrekar said:
Wish I still had my ElfIn, would had been so much fun still cooking for this device now
Click to expand...
Click to collapse
then i've an offer.. lets exchange our devices

htctouchp said:
then i've an offer.. lets exchange our devices
Click to expand...
Click to collapse
Is Diamond really better?

dsixda said:
Is Diamond really better?
Click to expand...
Click to collapse
may be... may not be ...
PS: its time to change your signatures from USPL to HSPL

htctouchp said:
then i've an offer.. lets exchange our devices
Click to expand...
Click to collapse
Yeah right
dsixda said:
Is Diamond really better?
Click to expand...
Click to collapse
Dont know about thr world but I find it fancy rather than better Also with a higher cpu, its a bit fast too

htctouchp said:
PS: its time to change your signatures from USPL to HSPL
Click to expand...
Click to collapse
hehe.. So does it work fine on Elfs with cooked ROMs?

dsixda said:
hehe.. So does it work fine on Elfs with cooked ROMs?
Click to expand...
Click to collapse
i don't have an Elf to test... anyway i'm also working on HSPL 2.26 and 2.28 for those who only use USPL 2.26 or 2.28 . once i finish, will send them to cmonex for approval.

htctouchp said:
i don't have an Elf to test... anyway i'm also working on HSPL 2.26 and 2.28 for those who only use USPL 2.26 or 2.28 . once i finish, will send them to cmonex for approval.
Click to expand...
Click to collapse
Awesome man... if you buy a Diamond you have to pass the knowledge on to me
LOL