Database Info

Desperate QTek owner.

Hi guys.
I did it... i screwed up my QTek S100! I tried to upgrade it, maybe the wrong files, dunno... now it is *dead* ! I only get a dark screen with "SERIAL V1.00" or "USB V1.00" if docked (should be bootloader mode). Nothing else.
Would you please be so kind as to help me in recovering from the disaster ? I do not have any backup, nor ROMs. I own a 512 MMC.
I would need English Roms... pleeeese !!
Thanks a lot.
Silver

Do you still have the files you used to upgrade? What's the name of the file?
Also, leave the info on your previous ROM.

I had the same problem with my Qtek S100 when upgrading it with the new firmware. The upgrade process stopped/crashed the first time leaving my unit in the same state you're describing. But, what I did was simply to run the upgrade utility again and then it worked fine the second time.
I don't know where you're from but if you have a swedish unit like me you can get the latest upgrade utlity from this adress:
http://www.smartmobile.se/upgrade/upgrade.aspx

Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.

slvrbllt said:
Here is my previous (and gone) configuration. It's hard to believe I can't re-flash it again. English ROM is my best wish...
I wish you could help me...
Oh! I have tried all "QTEK ROM WORKS" recent methods. I always get that Country Code Error and I do not saved the previous GetDeviceData output.
Click to expand...
Click to collapse
Looks like the same happened to me. Try to open battery cover (or remove battery for several second. Then put everything back and push Power button. Does it turns on (with hard reset)?

Nope buddy! The OS is gone! Whatever I try to do, it always starts in Bootloader mode (Serial V1.00/USB V1.00).

Try removing the battery for 30 minutes (or whatever time it takes for the backup battery to discharge). That should recover your previous configuration although I haven't tested it.

Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...

slvrbllt said:
Thanks for your reply, macrinus, but, exactly, how do you believe the 'vanishing' OS is supposed to reapper ?
We must be talking about spiritism in here...
Click to expand...
Click to collapse
I would like to try upgrading my JAM...but now I`m affraid a little bit... :roll: Have U tried to update with the latest S100 ROM...the swedish one?...or the I-mate JAM WWE ROM...?
Regards,
Primoz

Backup ROM
Is there a way to make a backup of my rom?
I have the qtek s100 with english rom.
Purchased seperate.
rom 1.03.00 WWE
radio 1.05.00 (upgraded)
extrom 1.03.100 WWE
Had the same issue with my radio version upgrade.
Scared the hell out of me ...
Backlight did not lit up ...
And an error apeared on my pc ...
But I was able to upload it when I tried again and the sync program of ms was killed.
If anyone knows how to make a working back-up ...
I like to help.
Think it's interesting to see how everything works.
And ofcourse, if you worked it out already, let me know how ...
And what macrinus said wont work.
When you do a hard reset, you do exactly the same.
So I think it's all gone.

why not dump the os to sd card, ntrw to pc and then put the nb1 fille in the ftp........

Tell me how ...
Tell me how, and I will ...
Sounds like chinese to me buddy.
Just got this pocket pc for 3 days.
First time I use a ppc.
Is that with xbackup?
Then choose all data?
Or do you mean another way?
What is ntrw?
And how do I get it from the backup?
And also, how is he suposed to upload it to his ppc?
Am asking this all to get to know it for myself.
Need the basic information before I can actually do all this ...

ok, sorry, if you are new to this forum, maybe its time now to browse this forum using the "Search" . There are hundreds or maybe thousands really good topics / advices available in this forum, posted by experts.
I and hundreds others I think, have really learn a lot from this forum.
On this specific topic you can search for :
- dump rom
- bootloader / bootloading.
You can also go to this forums ftp : ftp://xda:[email protected]/
to download all the necessary files
pls be patient and enjoy the tour......

Probs after install Faria wwe wm6

Hi there,
I have a MDA Vario (G4) from T-Mobile and after following this http://forum.xda-developers.com/showthread.php?t=297762 and this http://forum.xda-developers.com/showthread.php?t=293480
I was able to install Faria's ROM on my Wizard but now i'm having some problems:
1 - I still have to watch that ugly bootscreen
(by the way, are those version numbers "right"?)
2 - Every time i reboot it i get this error about sddaemon
Problem solved:
knwlsh said:
As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it
Click to expand...
Click to collapse
3 - I often get this error about TimeWizard.exe
4 - As you can see on the previous photo, the memory is running low and so I everytime i try to syncronize with ActiveSync 4.5 (Beta2) i get this
Can anyone help me on those?
Thx
(Forgot to say thank you to Faria and Mun_rus. So... Thanks a lot!)

Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24

Did you flash with shell tool? I think that you have no extended rom flashed, only OS.

As far as the error - your item 2...
Use Total Commander to search for sddaemon and then delete the link that it finds - you don't need it

funman said:
Ok 1. Are you CID unlocked, cus if you are not then the rom may not take correctly. It would be better if you had IPL/SPL at 2.26
Download and downgrade to the USA T-Mobile 2.26 rom. (At work so no time to find this for you, if you have not got it by the imte i get home i will update with a link)
Then try upgrading again to the WM6 rom, you may find that will sort all your problems!
The rom you should be able to find
HTML:
http://www.t-mobileapps.com/downloadcenter/Software_List.cfm?selDevice=24
Click to expand...
Click to collapse
DON'T use the 2.26 rom.... u've got a G4 and can't update IPL/SPL!

I downloaded this ROM
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
and tried to flash it but when it starts (the PPC screen turns red,green,blue) it gives me an error msg on the PC saying "ERROR [294]: INVALID VENDER ID"
(this PPC came from UK)
I tried to use the mun_rus How To with this ROM but apparently it stayed the same.
From the UK T-Mobile i can only find this http://www.tm-phonedownloads.com/download_manager_mda_vario.html
but i think this is what a I have now running.
Ideas???
-----------------------------------------------------------------------
As for the Extended Rom i followed this:
http://forum.xda-developers.com/showthread.php?p=1172768&highlight=extended+rom+g4#post1172768
but i will double check it the next time i flash my Wizard.

(deleted - the same as the above)

Problems Aswell
Sorry if this has been mentioned many atime before but my rom is like really slow sometimes and most of the time on the today screen only the time/date is shown and no other items. Also when turning on the device sometimes it doesnt get pass the boot screen (green one) and is resolved by taking the battery out which is annoying. Someone said by putting the orginal factory rom then installing farias rom then it will improve - tried that same thing. And outlook wont let me change email type from plain text to html.
Anybody Know???

seanmig said:
Tried this one:
http://www.t-mobileapps.com/downloadcenter/Software_Detail.cfm?ID=80
The PPC screen goes red, blue, green but then it gives me an error msg on the PC saying "WRONG ID VENDOR" or something similiar.
Click to expand...
Click to collapse
Missed my post or want a bricked device? You're CID-locked.... look here:
http://forum.xda-developers.com/showthread.php?t=298613

Actually I did miss you post.
Wizard still working
As for the link that you suggest it ends with de Mun_rus' HowTo and that was the one that i followed to flash Faria's Rom
--------------------------------------------------------------------------
knwlsh:
Sddaemon problem solved. At least it seams so...

Hey,
I just did the SAME upgrade you did and I am getting the same
timewizard.exe popup!
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
I have EVERYTHING working on wm6 with faria except for the annoying
popup.
have you been able to get ride of it?
Jeff

jeffr said:
however, my rom upgrade went ok , about the only thing different is I restored a backup including my registry to get all my programs back.
Click to expand...
Click to collapse
Is that a WM5 backup you restored? WM6 has stuff in the registry in different places. You've probably added a bunch of keys that shouldn't be there, and in the wrong place.
Also, WM6 PIM database is different format. If you restored that, its likely thats been hosed too.

Am I correct?

After reading, reading and reading I still am very confused.
Just a question and maybe I did not read that particular thread, sorry in advance, but if I understand correctly:
1. I extract my ROM
2. Change a certain cab from dutch to english
3. Rebuild my ROM
4. I can than load that ROM without the CID unlock HDSPL thingy
Correct?
Yes? Okay I start building.
No? Any other change to get an english non edited/tweaked Rom on my TyTn II?
The more I write the more I start knowing the answer. I think.

One thing I know for sure is that you do need the "CID Unlook HDSPL thingy". Without that you cannot flash a ROM so if you're going to do any flashing make sure you HardSPL your device otherwise you can render you device inoperable.
As for a ROM you can dump your ROM to have a backup so if you need to restore it later for warranty purposes you can rebuild from that. Or you can use the dumped ROM to create your custom ROM.
Check out this thread: http://forum.xda-developers.com/showthread.php?t=349354.
It's a very easy way to create a custom ROM.
Good luck.

Well, what are you trying to do? "non-edited" and "Tweaked" will not go in the same sentence... Also I see "change a certain cab from Dutch to English" and I get totally confused like you are... What are you really trying to do? Do you want to flash a tweaked English "cooked ROM" onto your device? That's easy - there are a couple of ROMs you can try out: Dutty's, Q-Mobile, Schaps, Gullum... or do you want to learn how to cook your own ROM? _Alex_ has put together an awesome cooking tutorial and Kitchen tools for you to use so I suggest you read those again! In either case you'll need to first unlock your device using the great pof's HardSPL/CID unlock utility...else you'll have a very expensive brick on your hands! But again, my question: what are you really trying to do?

I just want my Dutch version turned into an English version. That's all. Nothing more nothing less. No additional changes to my ROM. Just another language. Easy isn't it.

Fix for freezes WWE official 6.1 (only if using HardSPL) - Confirmed

Hi !
By freeze i mean: tap the screen or press keys and nothing happens for 2-5 seconds. This would happen to me about once every 2 minutes.
This is what i did:
http://forum.xda-developers.com/showthread.php?t=335568
I used the SPL extracted from the nbh of the official wm6.1 build which reverted my SPL back to the official one. You won't be able to flash a custom ROM anymore, until you install HardSPL again.
I have been using the Kaiser for about 30 min and no freeze.
It was not my idea that it was a SPL issue, someone mentioned this in a thread about the leaked WWE 6.1 (which is identical to the official WWE one)
edit1: This only applies if you installed HardSPL
edit2: Thanks to shafez for being the first to think about this. Apparently i was trying it at the same time as him, so i didn't know he also posted the results, that's why i started the thread as soon as saw the fix worked.

did you notice any other improvements like speed?

RPG0 said:
Hi !
By freeze i mean: tap the screen or press keys and nothing happens for 2-5 seconds. This would happen to me about once every 2 minutes.
This is what i did:
http://forum.xda-developers.com/showthread.php?t=335568
I used the SPL extracted from the nbh of the official wm6.1 build which reverted my SPL back to the official one. You won't be able to flash a custom ROM anymore, until you install HardSPL again.
I have been using the Kaiser for about 30 min and no freeze.
It was not my idea that it was a SPL issue, someone mentioned this in a thread about the leaked WWE 6.1 (which is identical to the official WWE one)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.

Thats more like it ..
xwaiz said:
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Click to expand...
Click to collapse

can some1 post in this thread how to fix the pagepool? some sort of manual?
thnx a lot

NoFatePPC said:
can some1 post in this thread how to fix the pagepool? some sort of manual?
thnx a lot
Click to expand...
Click to collapse
kyphur has a pagepool patcher program that allows u to modify pagepool of ur rom nbh very easily.
use search; its on here. use a phrase like "kyphur pagepool patcher" which should bring up promising results.

SSOO
what you did exactly?
u changed PP or flashed another SPL, if its SPL, could you post it?

xwaiz said:
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Click to expand...
Click to collapse
I don't doubt that you are experiencing better behavior, but I would like to get some more information on this from a developer who actually understands the mechanics here.
I am certainly not that person, but as I understand it the SPL is a bootloader. As such, I'm not really sure what it has to do with operation of the OS after the OS is booted.
In addition, everything I understand about the pagepool, and changing the pagepool, I have a hard time understanding how a different SPL is going to change the size of the pool.
Again, I don't doubt your experiences, and even if we get 100 people saying this worked for them I would like to understand why this would possibly work.
Any actual developers have any input? (please, my amateurish suppositions are enough guesswork, if you don't have educated answers there isn't need to postulate).

Can you upload the 6.1 spl here and this should work on an MDa Vario III right?

Don't really know much about all of the techie stuff but I have also found that by reducing the cache sizes to "advised" and the PP to 16MB I do not experience any freezes. I have been running Dutty's test and also tried it with both L26 Roms and it works every time.

Just flashed the official new rom om my brand new phone and I´m not having any freezing issues. The phone was not hardspl as it was new out of the box.
I am certainly not that person, but as I understand it the SPL is a bootloader. As such, I'm not really sure what it has to do with operation of the OS after the OS is booted.
Click to expand...
Click to collapse
I´m not into the workings of the device and not a hacker/programmer of any kind but what comes to mind is that if there is some incompability with the bootloader and the OS and the bootloader loads the OS the wrong way it seems natural to me that you will get errors that may result in strange behaviours of the OS. It may not be a large error and therefore the OS loads but with faults resultning in "bugs".
or its simply a bad rom. I will refrain from going to hardspl and testdrive the rom for a few weeks and se if I can come up with som errors.

can someone maybe upload german fixed version? thank you!

16 mb page pool really helps!
Very easy to do just using xda page pool patcher.
Do not forget to click "Save" button and then "Analyse" again to confirm .nbh file was updated successfully.

n00b question:
What is a nbh and pagepool? Will this affect the performance? I'm trying to learn as much as I can.

I don't post a lot, and I do not know the technical ins and outs of the SPL, but here is a theory. While browsing one of the threads regarding the video acceleration drivers, someone mentioned that the SPL could have something to do with initiating video acceleration. If this official release was supposed to have any sort of graphics fix, maybe something exists in the SPL of the official release that doesn't exist in HardSPL, and that is the reason we are experiencing the freezes. Just a thought.
bengalih said:
I don't doubt that you are experiencing better behavior, but I would like to get some more information on this from a developer who actually understands the mechanics here.
I am certainly not that person, but as I understand it the SPL is a bootloader. As such, I'm not really sure what it has to do with operation of the OS after the OS is booted.
In addition, everything I understand about the pagepool, and changing the pagepool, I have a hard time understanding how a different SPL is going to change the size of the pool.
Again, I don't doubt your experiences, and even if we get 100 people saying this worked for them I would like to understand why this would possibly work.
Any actual developers have any input? (please, my amateurish suppositions are enough guesswork, if you don't have educated answers there isn't need to postulate).
Click to expand...
Click to collapse

Isaygarcia said:
SSOO
what you did exactly?
u changed PP or flashed another SPL, if its SPL, could you post it?
Click to expand...
Click to collapse
I only changed pagepool to 16MB. Did not touch SPL (I think I'm using hardSPL).

Follow up: still no hang/freeze.
To sum up:
after flashing some 6.1 cooked builds around here, i noticed the device would stop responding, i tried two of Dutty's, one Vista, the Diamond V1, maybe some other too. They all had this issue, so i just waited for the official one, hoping that the freezes would be gone. They weren't.
So here's how i fixed it:
I flashed back the original 6.0 official ROM and saw there were no hangs / freezes. So the HW was ok.
After that i flashed the official wm 6.1 from HTC. Then i followed the "Idiot steps" (http://forum.xda-developers.com/showthread.php?t=335568) without any shortcuts (first 14 steps, i skipped step 15 ) and used the 6.1 ROM, not the 6.0 ROM to obtain the nbh file. Flashed the official SPL and hard reset.
All is well now (except i have to remove HTC Home and soft reset to use iGo).
No freezes for a day.

gauntman said:
Just flashed the official new rom om my brand new phone and I´m not having any freezing issues. The phone was not hardspl as it was new out of the box.
Click to expand...
Click to collapse
This supports my theory that 6.1 needs another SPL, probably not compatible with the old HardSPL

xwaiz said:
http://forum.xda-developers.com/showpost.php?p=2230736&postcount=206
It seems change the pagepool to 16MB helped. I tested, it works for me.
Click to expand...
Click to collapse
what is the original pagepool of the WM6.1 ROM just in case I want to revert back to it?

RPG0 said:
This supports my theory that 6.1 needs another SPL, probably not compatible with the old HardSPL
Click to expand...
Click to collapse
Just one question. What Country ID I should set in htc rom tool, to make it look exactly like UK htc branded kaiser?

Hard-SPL for x7510 and some other useful releases

ok, so you got it finally
this post deals with hardspl, the next one will deal with ROMs
Features:
- this is unsigned Hard-SPL and ignores CID too, so custom roms or dumped & reconstucted roms (and any htc rom update) can flash. but it enforces ATHE400 modelid (I patched it for that). so ATHE***** or ATHE100 roms will be rejected. ATHE400 or ATHE400** is accepted.
- also, this has SPL overwrite protection, so won't accidentally get overwritten. but if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.
- if your x7510 gets stuck on booting OS, then I have another way to revert to stock SPL in the cases when warranty is needed, this is a new special feature of the overwrite protection!
Requirements:
- first, if you have x7500 or x7501, then do not flash this.
- to download a compatible hardspl package for x7500/x7501 go to the other Athena subforums.
- also, make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
- finally, if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Instructions:
1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run x7510_HSPL365.exe
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 3.05-OliNex (3.05 is for SSPL version, the original SPL is 3.05.0000)
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 3.65-OliNex (3.65 is for Hard-SPL version, the original SPL is 3.05.0000).
NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the camera button (ALL THE WAY IN) then press the reset button with the stylus tip, then release the camera button when bootloader tricolour screen appears.
NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPL-Manual-x7510.exe from the SSPL-Manual-x7510.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
NOTE 3: do not use this RUU to flash anything else! this is only intended for flashing SPL's.
NOTE 4: flash stock SPL *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. usage: run the hardspl exe but do not press Next yet then replace the RUU_Signed.NBH with the stock spl NBH (posted here too), then go flash.
enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link).

stock ROMs and flashing utilities
1. customruu for x7510, grab it from attachment. use this to flash roms.
2. nbh building tool for x7510, in another attachment. just choose X7510 from device list to work with it.
3. some stock OS links (some taken from RUU some from dumped / reconstructed roms)
WWE (english) 19209: http://rapidshare.com/files/160439716/x7510_WWE_RUU_Signed_forATHE400.zip
WWE (english) 19217: http://rapidshare.com/files/160431134/x7510_WWE_19217_RUU_Signed_forATHE400.zip
GER (german) 19217: http://www.filedropper.com/x7510gerruusignedforathe400
CHT (taiwan chinese) 19209: http://rapidshare.com/files/159819583/x7510_CHT_RUU_Signed_forATHE400.rar and a mirror http://www.megaupload.com/?d=30L24D8W
NEW: WWE (english) 3.29.707 rom: http://rapidshare.com/files/169675908/x7510_WWE_3_29_707_RUU_Signed.zip
+ extrom for 3.29.707: http://rapidshare.com/files/173043400/3_29_707_extrom.zip
make a mirror for others too please if you can =)
NOTE: I haven't had some of these tested, please let me know if they all work fine
ohh, I also plan to port AP4 to x7510! =) maybe tomorrow.
enjoy! and if you are happy with the results, a donation is always appreciated to the first donation link in my signature ("To Cmonex" link).

Beautiful work as always.

CMONEX.... I will be your supporter for the next presidential campaign!
Please give us a FULL 3.5 HARD-SPL also for ATHE100 owners, to avoid the AP4 flashing , may be a single 1.2-3.5, with a dialog box to chose between 1,2 and 3.5 partition!
Athena owners Please DONATE to CMONEX, she is doing a really good job for ATHENA, and she never has done a preview of the work to push donation BEFORE the release, she just released the tools, as free gift.
I donate for this tool, even if I am just an ATHE100 owner!
P.S.:
I just receive the paypal statement, it is PAYPAL *WINDOWSCEMO" !!!!
I think this stand for windows CE mod... something, but SCEMO in italian means.... http://www.youtube.com/watch?v=CyOsulfpdY0
CMONEX I agree! Windows IS DUMB!

Hi Cmonex, mine is still fine and stable.
Thanks again for everything you've done for us! I owe you!

yes there'll be a 3.5 standalone package soon for ATHE100. that's one nice idea of bundling both ATHE100 SPL's, I'll remember that when making it
btw that 3.5 SPL has a feature to accept OS of 0x410 NBH type, which was meant as the NBH type for 3.5 SPL ROMs, and that would of course not be accepted/flashed by 1.2 SPL, but that somehow got forgotten , so the SPL 3.5 roms are all still 0x400...
at least this mistake can't be made now for the ATHE400 SPL, the modelid feature is not something that can be forgotten about =P
thanks for the donation, really appreciated
PS: yes my paypal business name is Windows CE Mods - I don't speak italian so forgive me for the choice, hehe.

Thanks a bunch cmonex - hard-SPL flashed successfully on my x7510.

thanks a lot...works fine for me

works
>> in german: http://www.xxacsxx.wg.am/ameo_16gb.html
if you want to build your own rom, please dont forget to put these *.dlls into it. >> http://www.xxacsxx.wg.am/SensorDLLs.zip there are needed for some apps and games, that use the g-sensors.

hi
first thank you cimonex very very much
second links for wwe doesn't work ,both of them.
please fix them.

saied 1 said:
hi
first thank you cimonex very very much
second links for wwe doesn't work ,both of them.
please fix them.
Click to expand...
Click to collapse
yeah I see the problem, it wasn't uploaded with collector account stupid rapidshare... will fix it soon
EDIT: fixed, again new links, now should be working longer

hoho
..........

xiumutou said:
hoho
..........
Click to expand...
Click to collapse
hoho means? sorry I don't understand..

it`s christmas time

Brilliant work...your USD200 is on its way...will try this when I get home later!
Cheers

OOOOOOOHHHHHHHH!!!!!!! Incredible! xDDDDD Thanks, thanks, thanks!
Now i'll begin to read and try to find HOW can i make an Spanish ROM for the x7510.. First of all i think a i need an original Spanish Rom no?
any idea of where to find it?
then i'll begin to read on how to make my rom.
Thanks!

Calcu said:
Now i'll begin to read and try to find HOW can i make an Spanish ROM for the x7510.. First of all i think a i need an original Spanish Rom no?
any idea of where to find it?
Click to expand...
Click to collapse
I uploaded the original Spanish ROM (dumped) sometime ago. You can find it in this post: http://forum.xda-developers.com/showpost.php?p=2509550&postcount=60

i've dumped myself this spanish rom (i've an spanish x7510 xD) but someone told me that we need "the original" rom not a dumped one...

I have flashed both versions of WWE x7510 posted on this thread. Both of them show the same specs on settings "about" and "device info".Has anyone comfirmed this?Even the rom date is the same.Also I have flashed the WWE clean rom of xacsx and still the same.And it is natural because he has used the same stock rom posted here.Cmonex maybe u have done a mistake and have uploaded the same file(?)Please check it out because the result will be tha we once we make a mistake we will make another one based on the first one like the clean WWE rom of xacsx if of course I am right.Thanx

cmonex said:
yes there'll be a 3.5 standalone package soon for ATHE100. that's one nice idea of bundling both ATHE100 SPL's, I'll remember that when making it
btw that 3.5 SPL has a feature to accept OS of 0x410 NBH type, which was meant as the NBH type for 3.5 SPL ROMs, and that would of course not be accepted/flashed by 1.2 SPL, but that somehow got forgotten , so the SPL 3.5 roms are all still 0x400...
at least this mistake can't be made now for the ATHE400 SPL, the modelid feature is not something that can be forgotten about =P
thanks for the donation, really appreciated
PS: yes my paypal business name is Windows CE Mods - I don't speak italian so forgive me for the choice, hehe.
Click to expand...
Click to collapse
Hi, CMONEX, Just sent you a donation. No: 5V8929312W355302M.
Bit late, as I was off for some time.
Could you give some info about how to use your tool to prepare our own ROM? What tool/kitchen can we use to mode the rom? Can it be Sogarth's kitchen, for example. If so then how to extract proper XIP for Athe400? Maybe my questions are not too good, but I am kind of noob in preparing roms.