When I turn on my device (TP) it ALWAYS asks me to align the screen and to config the calender and time, and also it asks me if I want to put a lock on it. (However the startup video does NOT show)
This is really annoying! Because I hade soft resetting or turning of the device, because I know I need to do that align and configs again!
I've hard reseted my device once, and before I hard resetted my phone, it wasn't like this! Is there a way to turn this of?
Just out of intrest, do you loose any data when you startup. Examples are other Windows settings, contacts, messages, history etc?
sorry, double post
Just to be clear, are you properly aligning the screen? I had to talk a geeky mate of mine through the process. He was briefly tapping the screen and the cursor wasn't moving around the screen as it should. I had to explain that you have to keep the stylus pressed gently on the screen over the little cross until it moves to the next position. Repeat at each position.
Sorry if I'm teaching you to suck eggs.
Uhmm, No I don't loose any data (settings or anything)
Also, yes I align the screen correctly I guess. I do it just as you tell me
But it's like, when you first got the phone, You first installed the WM (I don't) Then you align the screen (This I have to do) Then it asks you to tell it what time it is (This I also got to do every time i turn off and on my device) Then it asks if you want to have a code lock, you can skip or press next to make a lock (This I also have to do, And YES, I have tried to make a password and then just delete it afterwards) Then it tells you to type in PIN code (I also got to do this, but this is nothing I want removed hehe) Then lastly it auto configurated what network you use (For you guys ATT and sprint maybe, I got NetCom - Also this I do NOT have to do)
Please help me! hehe
Really annoying that I need to config this setting each time I restart my Cellphone
Has i always been this way? Have you not had the phone long?
It sounds like you didn't hard reset your phone after you either turned it on for the first time, or flashed a custom ROM.
I bet a hard reset will work, if not then it sounds like a hardware problem. Like back in the old days before WM5 if your battery died, thats it it would wipe. This is because the memory in the phone is volitile. Your phone might not be keeping the settings or supplying enough power.
Try a hard reset first, this usually solves most problems like this
marcd said:
Has i always been this way? Have you not had the phone long?
It sounds like you didn't hard reset your phone after you either turned it on for the first time, or flashed a custom ROM.
I bet a hard reset will work, if not then it sounds like a hardware problem. Like back in the old days before WM5 if your battery died, thats it it would wipe. This is because the memory in the phone is volitile. Your phone might not be keeping the settings or supplying enough power.
Try a hard reset first, this usually solves most problems like this
Click to expand...
Click to collapse
As said, I got this phone for christmas, I turned it on, and had to set it up, I did, and when I restarted the phone I did NOT have to set it ut again!
After 1 month I hard reseted it (Because of a bad program which ruined my dailpad) and now I have to set up the phone EACH TIME I turn it on!! (I do not have to install WM or config the Network)
OK, so I've Hard Reset my device again, works perfectly now!
Related
I have a 4155 that has developed the following problem: most of the times it doesn't turn on correctly. I press the power button, I see the backlight coming on but the screen stays grey (blank). Eventually I can get it back on, but only after performing a hard reset, then many, many soft resets (anywhere between 10 and 30). Then it works again for a little while, and the whole thing happens again.
The only way to avoid it is to have the screen stay on all the time, i.e. keep it plugged in and have it not turn off while on AC. If I allow the screen to turn off, chances are I'll have to do the whole reset procedure again, and it takes up to 30 minutes each time. It doesn't matter at all how well charged the battery is, and it even does it if I allow the screen to turn off while plugged in.
Of course in its present state it's just a little more than a paperwewight, not a PDA. I know that underneath it works correctly, just the display has this weird bug. I opened it up and poked inside, put it back together - no change. Does anyone have any idea? I'd really, really like to make this work again.
Thanks for any help!
(I should mention that I flashed the ROM once: I got it cheap off eBay because it was the French language version, and I flashed it with the English ROM. Worked like a charm for many months, then it developed the problem above. Don't think it's related to flashing, but thought I'd mention it anyway)
Bump. .
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
I'm not sure how many people, if any, have experience with this phone, but I'm taking a shot in the dark because I am completely out of options here. The phone is similar to the Cect M88, and the other Cect iPhone-clones available, although I'm not sure how similar the button layout is.
I installed PCM Keyboard last night, and all was working fine until this afternoon, when all of a sudden, my phone wouldn't wake up. I ended up having to pull the battery in order to get it to restart, but then it wouldn't boot past the Windows Mobile screen (the first one - didn't even make it to the second screen).
After several attempts to hard reset (top volume button + camera button + power button), I was able to get it reset, but even though active sync was running, folders weren't showing up properly on the phone itself. I did a soft reset, and folders then showed up, but this time active sync wouldn't load on the phone. Several more soft resets did nothing, but I kept trying, and finally... the phone froze up again to the point where it hung on the Windows Mobile screen again. Now, despite all attempts, I can't even get it to hard reset. When I push all buttons from an off state, the screen will turn blue (which seems to indicate some kind of resetting is going on since it normally goes straight to the WM screen) and then a few seconds later, the Windows Mobile screen will come up and hang. I've tried every combination of buttons possible, and I've tried hard resetting probably a good 20-30 times since this happened. I've removed the SIM card, removed the SD card... I've basically tried hard resetting seemingly every way possible, and yet it still will not reset and load up WM 6.0 pro like it should.
Any ideas on how I can get this thing to at least move past the WM screen? If I'm totally unable to hard reset, what would be the next best course of action? Since this is an off-brand phone with no support or any kind of warranty, are there repair places out there that can restore the OS? Is that something I can do myself? (Phone didn't come with any software or anything.) I'm at a loss here... I really don't want to end up with a $200 blue flashlight/paperweight. I know I took my chances when I bought it, but well... this stinks.
worked
hey man i know its old and hopefully you still have your phone.. ok what you need to do is let the phone die completely so you may have to keep the blue screen on and keep turning it on till your phone does this like you i have hard reseted serveral time to no avail but when the phone died i took out the battery plugged it in to the wall charger placed the battery in the phone let the red led light by the camera light up then i turned it on and before the screen could show the splash i did the hard reset phone is aye ok !! hope this helps man.. your post helped me..
eric
My Touch Pro of 12 months has decided that to continuously run the vibrator. I have tried a soft reset without success.
Can anyone advise me how I might stop this without a hard reset.
Sorry - but unless you have a reason why its constantly vibrating (ie you messed about with some settings, or it started after you installed / uninstalled something) then you dont have many options:
1) Do something to make the phone vibrate, then stop it and see what happens (although i guess you have already done this).
2) Remove the vibrate motor (a little extreme!)
3) Do a hard reset - obvisously you will have backed up all your data, so whilst a hard reset will be an annoyance, it wont be the end of the world.
Finally - and this might be bad news!
When you soft boot the phone it (should) vibrate then stop.
What does yours do? Does it vibrate as soon as the phone is powered / restarted? or does it wait until its booted into windows before it goes crazy? (1st sounds like hardware / water damage, 2nd more likely software - hard reset should fix).
If you can still run it ok other than the vibrating, try installing SPB Backup (not free, but the trial should work for this). Run the full backup, saving on your computer, and do a hard reset, then reinstall spb and restore from the backup. If it continues to vibrate, it is probably a setting, somewhere, that is bugged/messed up. You can also check the various notifications to see what all has vibrate set, it is possible that something as simple as continuously detecting wifi and being set to vibrate to tell you that. Of course, check that before doing the backup/hard reset/restore, if you haven't checked it already that is...
I know a girl who'd prolly buy it...haha
Hi everyone,
Phone was working absolutely fine, until I turned it off normally and put it in my bag earlier on today. I turned it on around an hour later and when I entered the code it suddenly came up as incorrect. I know that this is most definitely the correct code, and even when I've tried entering other codes they have also come up as incorrect. I have used the soft-reset several times, but I'm still locked out, and I will only do a hard reset as a -last- resort.
I want to find out if there is a way to: hack/crack the passkey for WM6.5, and if not, if there is a way to completely back up the internal memory or just PIM information when the phone is either on or off.
If anybody can help me, please do... I've never had this problem happen to me before. Phone is a HTC Touch Pro 2, stock Windows Mobile 6.5 ROM.
Thanks.
Do a hard reset on your phone. it has to be completely off, if it isn't take out the battery then put it in again and hard reset with the vol, dpad, and power button pressed down.
Omnichron said:
Do a hard reset on your phone. it has to be completely off, if it isn't take out the battery then put it in again and hard reset with the vol, dpad, and power button pressed down.
Click to expand...
Click to collapse
I know that I will probably have to do this, but is there anything at all I can do to backup the internal memory of the device beforehand?
And the TP2 doesn't have a d-pad but I know how to hard-reset it anyway, if it comes to that.