help me in phone samsung i607 - Non-Touchscreen Windows Mobile Other

hello
i want u to help me i have mobile samsung blackjack i607 and i make upgrade by softwear samsung black jack i600 and my phone dont work any more i can turn on and off the phone but the network off it said phone off and when i try to turn it on nothing happend and when i try to CONNECTED the phone by my comp to make upgrade by softwear i607 to make my phone work again the usb dont work it give me msg in my comp unknow port something like that can u help me plz how to make my phone work i hope u answer me and thank u

flashing the i607 with the i600 is a sure fire way of bricking your phone, wished you had gone through the sea of posts on the web warning against this upgrade....
that being said, i remember getting this error message with my i600, can't remember what i did to solve it. however you might wanna try and :
- make sure USB is enabled under ActiveSync
- connect your phone after the program is already running instead of vice versa.

Related

Hepl me Sda Tmobile II die !!!!

My phone is die because turn off PC when uprom ?
It's not turn on , not signin bootloader... Hepl me
No bootloader = gone
Someone tried to pry open the phone to JTAG the ROM but they reported back that a metal cover is protecting the ROM chip from being JTAG
So conclusion, sell your phone for scrap
thank u so much but i tried open my phone but haven't got Rom chip (Flash chip ?) replace it. i'm live in Vietnam. JTAG is what??? i don't known.
blackpuck said:
thank u so much but i tried open my phone but haven't got Rom chip (Flash chip ?) replace it. i'm live in Vietnam. JTAG is what??? i don't known.
Click to expand...
Click to collapse
If you can't get to the bootloader, your phone is dead. Give it up.
noone can help me ????
I don't think anyone can help. Since there is no bootloader, you cannot do anything. Plus you wrote that you have SDA2, which is not HTC Tornado.
I assume you also can't perform a hard reset?
http://en.wikipedia.org/wiki/JTAG
JTAG is a (physical) connection to the ROM chip to program it. You need special equipment and expertise to reprogram your phone this way, but if it's dead otherwise why not give it a try and open your phone .
Be sure to make some pictures and post them here .
Or go back to the store, try to look really innocent and have the manufacturer fix it for you (this probably won't work btw).
Someone tried to JTAG but the ROM chip is blocked by a metal cover
Hi... I have 2 sda tornado phone but I want to do one
hi...
please I would like remplace a rom (os) chip because I have a brick (white screen) tonado and another that is broken the mainboard..
bur If I know which is the chip flash I could be remplace and have one good phone..
thanks...
I have a silly question.... When you place connect your phone to your pc... Does windows do that sound as recognizing that something was connected? If so... Try to flash the T-Mobile SDA Ship ROM. You don't need to be on bootloader to flash a ship rom, as long as windows recognizes that something is there. The "enter boot loader" in the Rom Flashing will take care of that. At least.... it happend once for me when I was sure I had bricked my SDAII. Also, My SDAII does say its a Tornado. However, I have read many say that SDAII's are not tornados. Confused.
hi... the problem is that when I connect to pc, the pc can´t recognize... can´t acces to bootloader just I have a white screen.... I´ve tried with activesync, mtty, TeraTermPro but nothing....... first I upgrade to windows 6.1 perfect english and all perfect (I unloked the phone, I follow all steps to upgrade the phone and works) but the problem is the when I tried to downgrade to t-mobile official rom....
When you place connect your phone to your pc... Does windows do that sound as recognizing that something was connected? NO
If so... Try to flash the T-Mobile SDA Ship ROM. You don't need to be on bootloader to flash a ship rom, as long as windows recognizes that something is there. i CAN´T ... DON´T RECONIZE
The "enter boot loader" in the Rom Flashing will take care of that. At least.... it happend once for me when I was sure I had bricked my SDAII. Also, My SDAII does say its a Tornado. However, I have read many say that SDAII's are not tornados. JUST WHITE SCREEN AND CAN´T ACCESS TO BOOTLOADER O REBOT THE PHONE... I THINK THAT I damage THE SLP (BOOTLOADER)
Confused.

I-Mate Jam Bootloader & Connection error!

Hello XDA Nice Team !
By mistaken i wrote some file to my bootloader in my I-Mate Jam ..
That was after using the bad ROM : 2.03
it's the worst cooked version i saw !
Now my bootloader mode is working .. but no way to connect to PC with USB port ..
My computer does not recognize my Magican when plugged in bootloader mode anymore!
Bootloader Ver: 1.0
is there any way to fix or upgrade or restore original bootloader
Now i cant upgrade or downgrade my magican by any method
Noway to use successful connection with any roomupdate utility
Please help me to fix or restore my bootloader!
Thanks to any one read or replay or try to help or help me to resolve my problem
XDA lover
i'm sorry that happened mate...
i've had success with flash-from-bootloader attempts before, both on my Magician, when i accidentally flashed off of Vista and it'd enter the bootloader every week or on a reset using the reset hole, and also on my Wizard when i ignored warnings from WM5torage and it'd only enter the bootloader
what precisely happens when you connect to the PC, allow USB connections in AS/MDC, and let the phone enter bootloader however it does? i can just flash a rom from there, but i won't (iirc) get any reports of as recognising the device...
My experience:
1- when i plug my sd card into my jam .. usb not recognized in bootloader mood !!
2- when i use puty or roomupdate it reaches to USB> then when i type any command it does not respond !
3- i could do something .. i let my phone bootup and this i-mate logon screen stays 4ever .. i connected my ppc to pc and i could explre my imate by activesync ...
i could reach something .. when i explore my phone and remove everything from startup folder .. my phone boots .. and i can see start botton .. no touch alignment comes .. and everything works .. but.. screen is virtually reversed .. i can see the OK botton but i must click on the facing area and it be clicked ..
i think i executed some wrong hard SPL to my phone ant that happened >
is there any way to resolve this problem?
is there any way to erase flash on my I-Mate Jam????
is there any way flash my phone?
i also have prepaid JAFWM with pkey and USB cable .. no BOX ..
Help please!
that's messed up... howsabout flashing it at the point when the phone boots up? if there's an AS connection there, then it may work... i'd flash to an official rom though
Same problem , PLS Help !!!
Thx for help
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
If your magician isn't detected at ALL by your PC when plugging the USB cable into it (i mean, no new hardware; no unrecognized hardware; nothing is detected in your PC when you plug the USB cable), and unless you had previously made a SD backup of your entire Flash with this procedure ( http://wiki.xda-developers.com/index.php?pagename=MagicianSDflash ), then your only option will be to build a JTAG diag cable:
Here are some general directions / ideias:
Magician JTAG pinout: http://wiki.xda-developers.com/index.php?pagename=MagicianJTAG
How to build/run the JTAG: http://wiki.xda-developers.com/index.php?pagename=DeadBoot
Photos : http://www.cf-box.com/htm_data/55/0912/1679.html
Some interesting stuff for debugging problems: http://pda2u.ru/ptopic205.html
For sure cotulla has one built so to test his ROMs + bootloader - maybe he will be willing to give you some directions if you run into problems, and above all, give you a prepared .nb0 (with the bootloader file) for your magician, which i do not know if there's one out there, extracted from an original ROM.
Anyway, you can always try and do it for yourself using itsme utilities. Follow this link: http://forum.xda-developers.com/showthread.php?t=218643
Regards
Keeper,you're awesome! I'm searching for JTAG,too
xiaojin1985 said:
You should check USB connection I think...
Try plug your battery out of device and wait a moment (e.g.10 minutes) and try again,sometimes it will be fine when you did this.
Click to expand...
Click to collapse
Dear xiaojin1985 ,
Thx for your help, But unfortunately i tried your solution but it dosnt work !
Dear Keeper,
Thanks too for your help,
and i think the solution for my problem is one of the solutions you says ( How to build/run the JTAG: ) ,
but the pictures is not available anymore , so pls can you get the pictures ?
All the pictures are in here:
http://s218.photobucket.com/albums/cc23/alex_beda/ and in attachment there's a .mth file with all the pics built-in.
Don't take it wrong what i'm about to say, but in all honesty if you can't figure this out yourself (digging up the internet for the missing pics), i would suggest that you shouldn't try this, since this ain't easy at ALL...
Just to give you some ideias, it will require you to adapt your magician test point signals (TDO;TDI; nRESET; etc,)seen on the magician pinout pic to what is said; solder very thin wires (best done with a small hot air tip); fixate the small dip switch (micro switch) to be always on; keep the USB connected...idk... plus alot of other small details which ain't easy to accomplish.
Personally i haven't tried this yet but for sure it would work
If you decide to go ahead, please post some results!
Connection error solution
this is my problem
hi all. A friend of mine gave me an S100, and after i played for a few days with it, i decided to update it's rom. A "country error" problem appeared,cause i have the greek version, so i ran MaUpgradeUt_noID.exe which completed (as showed 100% process). My (new) problem is that i cannot update anymore. Every time i enter boot menu, i ran the upgrade
(HTCMAG_ROM_WWE_O2.rar) following all the steps normally. When the device resets (so the upgrade is going to start), it's re-reseting again and showing ERROR 101 connection error. Any ideas?
Qtek Greek version
R 1.12.00
G 1337.42
D 1.12.00 WWE
P.S. apart the problem everything is function properly
and the solution
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe radio_1.11_greek but idont reset the qtek in first screen
and upgrate downgrate start all ok
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run MaUpgradeUt.exe MagicianRadio_1.12.10. uk but idont reset the qteki n first screen
upgrate from radio 1.11 to 1.12.10
reset
welcome screen
hard reset
plug usb (uncheck allow usb connection in activesynch )
run HTCMAG_ROM_WWE_O5_251209
everything is ok my magisian run the new Rom
here..........................

Help And Hi

Yup i signed up as i have a problem, The phone model is s710 which im guessing by the looks of it is this one. Heres the problem, My brother gave me his htc phone with this rom file from this site on ,Dont ask me what one as i dont know but basicly it fails completly, its so slow its unbarable to use and near impossible. But i cant re do the rom to another one without the activesync drive for the phoneas he didnt give me the cd, Does any one know where i can get the driver.. I have the newest active sync installed.
Thatnks Tom2oo8
hey tom. try this when u have downloaded the rom u like, i assume u want a factory rom so download it from htc. or from the ftp here...
turn off your phone
press the camera button
plug the usb wire
be amazed by the 3-color screen
ok now your phone is recognized for flashing a rom.
You can get the active sync at download.microsoft.com go to the windows mobile section and you should find it!
If you also get the lastest active sync...divers are not necessary...couse it is detected as generic RNDIS by Windows...

An old Mio A501, my only phone.. and it's broken

I really hope someone can help me, i just got this old phone from my dad but it has some serious bugs, after 10-15 minutes of stand-by it just looses the ability to make and recive calls, i've done a hard reset but the problem remains. I think that in this case, a flash of a new rom would solve the problem.
I found a custom rom on the forum for this device but my windows 7 wont install the drivers for the device when i plug it in
Until my pc doesnt recognize the device i cannot do anything, can you please help me on this step?
PS: already installed WMDC 6.1 but it doesnt see any device

O1 dont recognize SIM..!!

Hello to all xda comunity its is my first post and i apologise for my bad inglish (im from Argentina)
well the problem is my O1 have and 4.0 ICS (i dont remember exact all the info about the rom) from a gingerbread 2.3 modify but with the 2.3 official, with 2.3 version was all good but its began to work not too fine, little slow and when i plug the usb cable the phone dont recognize, its like no plug, well i take the phone to a technical friend who weld the usb conector and he tells: in my computer detect and unknow device, i say great because that was a advance because before that doesnt happen, when i took the phone to my house was the same...
based on my introduction i beg u for help, the phone enter in recovery mode but i dont found a rom with the old band i think is that what i need to restore my phone, as i cant conect to pc i need and method with SD so plis..!! if anyone got any idea to try plis help me
try to not put: use KDZ because my pc dont recognize the phone ( i try to in other PC) i need something that just use SD.
thanks to any who can help me

Categories

Resources