O1 dont recognize SIM..!! - Optimus One, P500, V Q&A, Help & Troubleshooting

Hello to all xda comunity its is my first post and i apologise for my bad inglish (im from Argentina)
well the problem is my O1 have and 4.0 ICS (i dont remember exact all the info about the rom) from a gingerbread 2.3 modify but with the 2.3 official, with 2.3 version was all good but its began to work not too fine, little slow and when i plug the usb cable the phone dont recognize, its like no plug, well i take the phone to a technical friend who weld the usb conector and he tells: in my computer detect and unknow device, i say great because that was a advance because before that doesnt happen, when i took the phone to my house was the same...
based on my introduction i beg u for help, the phone enter in recovery mode but i dont found a rom with the old band i think is that what i need to restore my phone, as i cant conect to pc i need and method with SD so plis..!! if anyone got any idea to try plis help me
try to not put: use KDZ because my pc dont recognize the phone ( i try to in other PC) i need something that just use SD.
thanks to any who can help me

Related

Help And Hi

Yup i signed up as i have a problem, The phone model is s710 which im guessing by the looks of it is this one. Heres the problem, My brother gave me his htc phone with this rom file from this site on ,Dont ask me what one as i dont know but basicly it fails completly, its so slow its unbarable to use and near impossible. But i cant re do the rom to another one without the activesync drive for the phoneas he didnt give me the cd, Does any one know where i can get the driver.. I have the newest active sync installed.
Thatnks Tom2oo8
hey tom. try this when u have downloaded the rom u like, i assume u want a factory rom so download it from htc. or from the ftp here...
turn off your phone
press the camera button
plug the usb wire
be amazed by the 3-color screen
ok now your phone is recognized for flashing a rom.
You can get the active sync at download.microsoft.com go to the windows mobile section and you should find it!
If you also get the lastest active sync...divers are not necessary...couse it is detected as generic RNDIS by Windows...

Samsung Galaxy 3 Questions & Answers / FAQ

Hello all
Here is the place where you can ask a question about your Galaxy 3, and the question will be answered (by me or by anyone else). So if you have any "beginner" question or everything else, just ask here
Also, this place will also be a FAQ, to answer all the common questions about the phone .
MOD EDIT Note : first check here & see if u can get ur answers & then ask ur questions
Link : http://forum.xda-developers.com/showthread.php?t=858583
in future all questions should be asked here only
Why is it when I flash a custom firmware, wifi does not work?
Sent from my Samsung Galaxy 3 FROYO
What firmware did you flash ?
JPB.
Sent from my Samsung Galaxy 3 FROYO
Gsam101 said:
Hello all
Here is the place where you can ask a question about your Galaxy 3, and the question will be answered (by me or by anyone else). So if you have any "beginner" question or everything else, just ask here
Also, this place will also be a FAQ, to answer all the common questions about the phone .
Click to expand...
Click to collapse
hi
good job done i will stick this and move to the development section
so all can ask their questions only in this thread and not open threads for their questions
The Dark Lestat said:
JPB.
Sent from my Samsung Galaxy 3 FROYO
Click to expand...
Click to collapse
hi
i have used it and wifi did work for me
u must do a wipe before flashing the rom and them do a hard-reset after flashing it and everything will work for u
try this one its good and im quite happy its JPF custom rom by TiBiSMART: http://forum.xda-developers.com/showthread.php?t=909475
thanks
hari
haree said:
hi
i have used it and wifi did work for me
u must do a wipe before flashing the rom and them do a hard-reset after flashing it and everything will work for u
try this one its good and im quite happy its JPF custom rom by TiBiSMART: http://forum.xda-developers.com/showthread.php?t=909475
thanks
hari
Click to expand...
Click to collapse
I know, but I'm talking about a custom ROM that I am creating.
Wifi never works upon multiple hard resets/wipes.
Anyone able to install the new honeycomb 3.0 music player
Any samsung galaxy user able to install the new honeycomb 3.0 music player app
haree said:
hi
good job done i will stick this and move to the development section
so all can ask their questions only in this thread and not open threads for their questions
Click to expand...
Click to collapse
hi hari what about htc touch 3g have u given up on it
:-(
anujsh said:
Any samsung galaxy user able to install the new honeycomb 3.0 music player app
Click to expand...
Click to collapse
No, I wasn't.
Screen periodicaly blinks ON and OFF
GT-I5800 FROYO.XXJPA
After additional factory data reset (it was made with keyboard code, because hard reset buttons combination does not wok) and first clean connection to Google account without any additional installs to phone, it began to blink every 2 seconds. Google account was changed to different one.
On locked mode phone's screen lights ON and OFF non stop every 2 seconds and like asks to unlock. It lights several seconds.
On unlocked mode after screen time out period, screen goes off, but after second of time switches lighting on again and does not lock again.
I seems that phone tries to lock, but can't do that for some reason.
It drains battery very fast way.
On first booting of phone after factory reset, I did not noticed such blinking.
I've noticed, that phone screen started to blink after the first contact was entered to address book and after WiFi and 3G data transfer connected.
I've tried to switch off WiFi and 3G/GPRS data transfer - did not help after that. Screen blinks. So it seems it is not Google account problem.
Maybe contacts? Or phone service download something in background from network? Incredible.
Before factory reset and phone user (and Google account) change my phone with this firmware version FROYO.XXJPA has no such problem. JPA is a little buggy, but it worked. Currently screen blinks and I have no idea where is the problem. It does not look like it could hardware problem.
One additional notice: phone stills has battery problem. It shows that battery dries out, phone switches off. It to switch it on again, battery indicator shows at least 50% again.
Last step what I could try - flash another firmware version and format SD card.
Thank You.
Does anyone know what is the maximum data transfer speed of the Galaxy 3 memory card reader? Is it worth to purchase a faster memory card than Class 4?
I am having a usb problem. When I connect the phone, the phone acts like it is connected to a charger, I can even change usb settings (including development) while connected without it telling me that it cant be changed while usb is connected. Windows recognizes it under devices and printers under the unspecified segment and says its and unkown composite device, kies starts trying to connect. I'm a little puzzled. I tried the basics. Rebooting, different ports, different computers (even though i dont see how that could help).
I'm using rooted jpf + lagfix 2 and modified jpb kernel
I'll probably just reflash if nobody has any idea
stubborn_d0nkey said:
I am having a usb problem. When I connect the phone, the phone acts like it is connected to a charger, I can even change usb settings (including development) while connected without it telling me that it cant be changed while usb is connected. Windows recognizes it under devices and printers under the unspecified segment and says its and unkown composite device, kies starts trying to connect. I'm a little puzzled. I tried the basics. Rebooting, different ports, different computers (even though i dont see how that could help).
I'm using rooted jpf + lagfix 2 and modified jpb kernel
I'll probably just reflash if nobody has any idea
Click to expand...
Click to collapse
hi
when USB D bugging is checked and the phone is connected u will see a notification asking if u want to connect mass storage and when u chek it it will un mount the SD and then u will see the SD on ur pc
for kies to detect u must un chek the USB debugging and connect the phone and activate the kies this is how it works for me hope it helps
thanks
hari
Hi i have Samsung Galaxy 3 DA:JH7,PHONE: JG3,CSC: JG2 android 2.1 update 1 in Kies no have fw update for me the phone is locked from Vodafone es .Can I upgrade my phone to android 2.2 or 2.3
haree said:
hi
when USB D bugging is checked and the phone is connected u will see a notification asking if u want to connect mass storage and when u chek it it will un mount the SD and then u will see the SD on ur pc
for kies to detect u must un chek the USB debugging and connect the phone and activate the kies this is how it works for me hope it helps
thanks
hari
Click to expand...
Click to collapse
no, but thanks for trying (and assuming that i have no knowledge about the issue)
I decided to reflash just the pda, i want to check some other things as well so it wasnt that big of an issue.
stubborn_d0nkey said:
no, but thanks for trying (and assuming that i have no knowledge about the issue)
I decided to reflash just the pda, i want to check some other things as well so it wasnt that big of an issue.
Click to expand...
Click to collapse
hi
sorry it did not work for u i really dont understand why
even just now i tried it and it works as explained in my last posting
dont know why not for u
thanks
hari
haree said:
hi
sorry it did not work for u i really dont understand why
even just now i tried it and it works as explained in my last posting
dont know why not for u
thanks
hari
Click to expand...
Click to collapse
well I know what you said works, however that was not the issue with my phone. the thing is my phone was acting like it was connected to a charger, not usb. soo there were no such notifications, no signs on the phone that it was connected to usb. That was my problem, not not knowning how to use my phone.
stubborn_d0nkey said:
well I know what you said works, however that was not the issue with my phone. the thing is my phone was acting like it was connected to a charger, not usb. soo there were no such notifications, no signs on the phone that it was connected to usb. That was my problem, not not knowning how to use my phone.
Click to expand...
Click to collapse
hi
just for ur info
charging does happen and the other things i said in my last post too so their might be something wrong with ur phone chek on it if the the problem still exist
thanks
hari
haree said:
hi
just for ur info
charging does happen and the other things i said in my last post too so their might be something wrong with ur phone chek on it if the the problem still exist
thanks
hari
Click to expand...
Click to collapse
lol, something was wrong with my phone, that is why i asked, lmao. what you said happens when everything is working correctly, and lol, I know charging happens, however that is all that happened, like I said it acted as though it was hooked up to a charger, not usb. Which obviously means charging + no usb stuff. I said that I could change usb(including debugging) settings while connected, which you shouldn't be able to do while connected to usb. You just misunderstood the problem I had

[Q] Problem Optimus 3D after upgrading to CyanogenMod !

Hello everyone! I state that is a month that I bought a LG Optimus 3D Gaming Edition and I have already made ​​many changes: root, recovery, rom modified, etc. ... The other day, after having installed the rom Cyanogenmd, I was presented with a problem, my terminal is not cycled more (I was calm at other times because I had already sbrikkare) ......... as usual ...... I turned on the pc plugged it into the terminal in debug mode ... I noticed that the connection between the terminal and the PC was not stable (ie it connected and disconnected at infinity)! Later I also discovered that the terminal is not recharged and even now no longer know what to do! Please help me I'm desperate!
is there anyone?
fabersantucci said:
is there anyone?
Click to expand...
Click to collapse
Gaming edition?
Sent from my LG-P925 using XDA Premium App
Did you brick your phone dose it turn on? dose it just loop in download mode? volume down and power. If it loops in download mode then you probly hard bricked it i did that and had to take it back no way to fix it.
Thank you. Anyway I think I hard bricked the LG, why not start their own, even in download mode.The last choice is to take it in assistance?
Sorry for my bad English, I'm using google translator !
If you go to the thrill 4g forum and go to general and then the thread free assistance a guy there can try to help you if he can then youll have to tak it back if you can.
Did you format the SD card when you were on CM7 ?
omgomg said:
Did you format the SD card when you were on CM7 ?
Click to expand...
Click to collapse
Ya i did that and hard brickdd my phone.
Hi all,
I too have done the same bull****. I formatted the SD and now the phone will not start: tried in recovery, in emergency, in normal mode, unfortunately there's no way to restart it.
Could you make a copy of your SD in RAW mode and try to give me the backup?
I extract the contents in my SD to try to start the phone.
Did you think that's possible?
Thanks
Just putt in your data cabel ond whait for the connecting sound. maybe putt itt in and out several times and the computer shall install the usb driver then run lg recovery tool. good luck sorry for my bad inglish
shtchalle said:
Just putt in your data cabel ond whait for the connecting sound. maybe putt itt in and out several times and the computer shall install the usb driver then run lg recovery tool. good luck sorry for my bad inglish
Click to expand...
Click to collapse
Thanks for reply.
I tried a lot of time on a lot of pc (windows xp, windows 7 32bit, windows 7 64 bit= without any fix.
I think the problem is due to the fact that the CM7 installs recovery, emergency mode, normal boot on SDCARD.
It's impossible to start the phone in any of the three options.
Just connect the smartphone on PC, the USB port continues to connect / disconnect (every second).
Probably with a raw image of the iso, maybe I can fix the issue, hoping that the required data are read from external memory and not form internal memory, also I have trouble: (
My phone was exactly like you're. Some how i started the phone in recovery mode butt screen is still black just a sound in computer and after several attempt computer install drivers and LG recovery tool worked. Hard to explain in words. Hope you fix it.

[Q] Why it does'nt know my Tablet ?

I have a chinese tablet that I've flashed it with livesuit 1.07 but with a wrong version of android, Now I've found the right version but my Laptop doesn't Install the drivers and H don't know why! Is it somehow related to the wrong version I've flashed or it's somehow related to my cable ? cause whenever I've asked a question here nobody answered and I solved my problem , but this time my laptop is new, my cable is newly came out from motorola Xoom 2 box and every usbdrivers I tried let me down!
I'll be glad if anyone help
I dont understand how you are trying to connect. is this fastboot, recovery, emergency mode, some fancy odin knock off thing.
I cant help if i dont have more info but you can look at something like the universal naked driver here on xda and try to fix the problem yourself.
Godd luck with your problem though!

Goophone/Kiphone

Hi all,
I have a friend who has a goophone/kuphone couldnt tell you which as he never got mk tools to read it. A local shop flashed it for him with the wrong rom, So i have taken a look at it PC detects it flashtoolmod etc problem I have is finding a rom that one flashed will work,
With all the roms Ive tried only on does not 4032 all the time and thats 1Phone5_131031_backup_131125-160826
But the phone just wont turn on any ideas loosing the plot trying to get it sorted
thanks
UPDATE
Hi I know now its a Kiphone I managed to get a rom working I now have an either stranger problem.
When I plug in a USB cable (Either PC or Charger) the phone shuts down instantly then bootloops If i run Flashtools I can still upload roms
Etc but as soon as Thats done and i Take the cable out and turn it on all is fine put cable back in and it goes mental
Any help appreciated

Categories

Resources