Database Info

Universal Dead

Hi
My Uni is dead, dont enter in bootloader mode, dont upgrade, dont do nothing.
Please help me, i dont know what happen.

You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?

cktlcmd said:
You have to give us more clue. What were you doing with the Universal before this happened? Were you in the process of upgrading, downloading, etc...?
Click to expand...
Click to collapse
I upgrade with Vista. Dont work nothing.

Solution..
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it

danidabest said:
Hey i had the same problem... the Screen will say Serial no. and at the bottom it will say V. 1.01
Just do one thing.... connect yr fone to a desktop with Xp and then try running the upgrader... make sure u have the Sync software with u.....
I know this because the same thing happened with me.. my fone was dead.. till i did this..
try it
Click to expand...
Click to collapse
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message

hellonasty said:
My problem is the screen dont have nothing, any letters ou numbers.
having constantly the 150 connection error message
Click to expand...
Click to collapse
Have you tried the suggestion at least?
Look for the original ROM of your device and find a WINDOWS XP computer and try to reflash with those 2 as suggested from above.

i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks

hellonasty said:
i want Try Mamaich Method but dont recognize the usb port.
Do you know?
Thanks
Click to expand...
Click to collapse
I don't think it would work. The Mamaich method is for a different problem. Yours clearly is due to Windows Vista incompatibility. I had read a couple of this type of thread in the past and the only solution was already given to you.

do you know where is the original rom?

hellonasty said:
do you know where is the original rom?
Click to expand...
Click to collapse
What type of Universal do you have? TMobile, O2, IMate...etc?

Sorry
I have a qtek9000

Before I tried my 1st upgrade I download the official ROM just in case.
I thought I had it but I can't find it. I have one copy on the PC at work, but I will only return there next Wednesday, so no big help.
I remember see a post were a member informed that he had an ftp with all the ROMS. Maybe some one remember the address. If I get, it i will post it.
Cheers.

Here: http://forum.xda-developers.com/showthread.php?t=296651&highlight=official+qtek+rom
Take a look into this thread at POST #7 by nvatvani
---

cktlcmd said:
Here: ftp://ftp.xda-developers.com/Universal/Uni_AKU2_WWE/QTEK_9000/
---
Click to expand...
Click to collapse
Am I wrong or those are the files that have been deleted because M$ "request"?

ultravox said:
Am I wrong or those are the files that have been deleted because M$ "request"?
Click to expand...
Click to collapse
OOOOPPPPs. that was the wrong dead link. But I corrected it already.

dead xda
i was trying to upgrade rom downloaded from o2 for my xda 2i i have same problem as previous guy i have tried to load from windows xp machine but get connection error 101 my screen is blank apart from usb and v1.01 can anyone help?

sounds to me like it might be as simple as a dead battery.
1. what happens when you try to charge it with the wall charger?
2. have you tried switching batteries?
3. you still haven't said what you were doing with the device before this happend
4. this is totally unrelated to WM6 Forum, you shouldn't have posted this here

when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me

sudf said:
when you put your universal on usb with a pc on xp there is a detection? or not and are you sur that there isn t any write on the screen .
because i have the same pb in 2006 an ithink that my universal is dead an aftrer 2 day i put the universal on the light and i see v101 if you don t see to the light you don t see it because the backlight don t work.
in this case the led for the charging don t work to.
if you have this there is a solution with a free operator rom i think it s on my pc.if you need tell me
Click to expand...
Click to collapse
Thanks
It do not enter boot loader with light + power + reset and show no signs of life.
The light is off.when i push reset button flash the red light.
When connected to USB, PC reports "USB device not recognised"
I want a original rom for qtek9000 for test.
Anybody have this rom?

When I bricked my XDA Exec by means of hung program during the upgrade, I had: no reaction to normal Reset, no entry to Bootloader - basically a brick.
I did LeftSoftKey + RightSoftKey + Reset to do a *hard* reset (everything was lost anyway), and after that I could see "Serial... v1.01" Bootloader notification. When you connected that to a computer, it changed to "USB... v1.01" prompt.
So I just took JWright's image, and re-flashed it.
Guess what? It detected I had no image/extRom/RadioRom whatsoever then offered to re-flash them. I knew I'm OK when Radio upgrade progress indicator started to move.
It took me to get to another machine first, however. My Vista machine totally screwed up things, whereas my home XP managed to do the job.
Sitting on JWright's 2.02.02 now - very thoroughly made ROM, love Voice Command integrated with it instead of crappy Cyberon's software.

[Q] PC does not regconize my captivate !

Hi everyone,
My friend brought me a SS captivate at&t, it gotting bootloop AND PC DOES NOT RECOGNIZE EVERYTHING ABOUT it, recovery mode not work. i tried everything but no result, different oem usb cables, different pc with different os, it just charged the phone, nothing else. (not because of driver, my cappy works fine with these pc). I sent it to a few repair center, they used the Riff box (something like that) to flash direct to phone's mainboard but couldnt save it. Now it still hanging in at&t logo and just only charging when connecting to pc
Many thanks to any ideas can make it revive. Im in Vietnam with no at&t store here. Sorry about my bad english. Please help me!

Maybe this thread can offer some help... Captivate Connection Issues and Download Mode Help

Thread closed
4-2ndtwin said:
Maybe this thread can offer some help... Captivate Connection Issues and Download Mode Help
Click to expand...
Click to collapse
Yes, that is the thread that will help you.

HTC Sensation wont connect to PC (only charge)

Hey, i have had my sensation about 2 months, now when i connect it to a pc it dosnt ask what connection type to choose, it only charges, in the menu it is set to ask me about connection type, while connected to pc there is now no icon in the notification area (used to say 'charge only' or 'disk drive') even when rebooted into 4ext recovery and mounted/toggle usb connection, it dosnt connect as a disk drive like it has always done in the past, it only charges, i have tried 3 different pc's and 3 different micro usb cables, also have tried updating the firmware to 3.24 and installed ICS with the same result, i think its a hardware issue? last time it worked was 3 days ago connected via usb to a jvc headunit listening to my music files.

Weird problem!
Maybe you could try with a different SD card to eliminate the possibility of it being an SD card problem?
If it still doesn't work with another SD Card it may well be a hardware problem.

k0zmic said:
Weird problem!
Maybe you could try with a different SD card to eliminate the possibility of it being an SD card problem?
If it still doesn't work with another SD Card it may well be a hardware problem.
Click to expand...
Click to collapse
Yea i will try another sd, but on the phone in ES i can see all my files on the sd, and when i take out the card and put it in my laptop all the files are there no problem, i have also tried formatting the sd on the phone, still the same result but i will try a different card, yea i think its an actual hardware problem , cheers

leonclement said:
Hey, i have had my sensation about 2 months, now when i connect it to a pc it dosnt ask what connection type to choose, it only charges, in the menu it is set to ask me about connection type, while connected to pc there is now no icon in the notification area (used to say 'charge only' or 'disk drive') even when rebooted into 4ext recovery and mounted/toggle usb connection, it dosnt connect as a disk drive like it has always done in the past, it only charges, i have tried 3 different pc's and 3 different micro usb cables, also have tried updating the firmware to 3.24 and installed ICS with the same result, i think its a hardware issue? last time it worked was 3 days ago connected via usb to a jvc headunit listening to my music files.
Click to expand...
Click to collapse
Well I had the same problem with the custom ROM I use.
Installing it clean with a full wipe solved it.
It is definitely NOT the pc, laptop or SD-card.
Are you on a custom ROM?
- Yes then install clean with full wipe. (make a nandroid backup!!!) and install all apps new.
- No then do a total reset (reset to factory settings) and do all the install stuff new. After that you can also install with RUU your ROM designated for your device.
You will see your USB connection will show up!!

same here
i have exactly the same problem as described in op.
will try flashing a new rom then also; first have to buy a flashcard reader then to get my new rom ON the sd card....
or do you think a nandroid restore would fix the problem? will try that first.
Will report back

The nandroid might restore the problem.I'd try it first.if not , then do the full wipe reinstall as said above .if at the time of the nandroid back up it was working is a good possibility it will fix the issue. Hope this helps!
Sent from my HTC Sensation 4G using xda premium

I am having the same problem ..... Dont feel like wiping and going stock.
Sent from my HTC Sensation XE with Beats Audio using XDA

Couple of tips that might fix your problem.
If you're running aokp make sure you disable fast charge.
Turn on mtp in USB computer connection settings. I have trouble accessing the options from most custom roms, so a little work around is to install either apex or nova, long press add to home screen - shortcuts - activities - scroll down to Settings - USB computer connection(com.android.settings.usbsettings) . Tap it and you should get a shortcut. Select mtp.
Ultimately, the thing that fixed my same issue was getting a different USB cable lol. You can also try different ports on your computer.
Good luck, hope you can find a solution to your problem! If all else fails, you can try using airdroid for transfer over Wi-Fi

Anyone find a fix on this , mine has started doing this yesterday :crying:
Tried 3 different cables , different usb ports , different sd card , formatting sdcards in 4xt recovery , reflashing firmware.... also htc sync re installed for drivers (htc sync does not see the phone), adb re installed (adb does not see the phone??)
dont think its the rom as adb cannot see the phone in fastboot
anyone any other ideas , tried ninjasalad suggestion on enabling mtp also ??

I think you're fine. I had this problem after flashing ARHD 6.6.X, OrdDriod series, and PkMn series. What I did was the following:
Went into settings. Connect to PC. Unchecked the "ask me" , Restart phone. Then checked "ask me" again. Lastly, restarted phone again.
After doing that a couple times, it worked for me. Maybe you can try that.

This happened to me as well. I think it's a hardware problem

silverboi17 said:
I think you're fine. I had this problem after flashing ARHD 6.6.X, OrdDriod series, and PkMn series. What I did was the following:
Went into settings. Connect to PC. Unchecked the "ask me" , Restart phone. Then checked "ask me" again. Lastly, restarted phone again.
After doing that a couple times, it worked for me. Maybe you can try that.
Click to expand...
Click to collapse
This worked for me. Thanks a million!

same problem, only worse
I have the same problem with my LG optimus G, except my phone screen is broken so that I can't use it at all. I've been trying to connect to my computer to back up my contacts and such but it is only going into charge only mode. I went into the control panel and tried to change it there but I couldn't find it. I have windows 7 by the way. if anyone knows any way to help me pleasee save me!

ReZnOVO said:
I have the same problem with my LG optimus G, except my phone screen is broken so that I can't use it at all. I've been trying to connect to my computer to back up my contacts and such but it is only going into charge only mode. I went into the control panel and tried to change it there but I couldn't find it. I have windows 7 by the way. if anyone knows any way to help me pleasee save me!
Click to expand...
Click to collapse
check these
make sure you have enabled usb debugging mode from settings
install htc drivers
install htc sync(i am not sure if it is necessary)
use 2.0 usb ports
use the original usb cable if you aren't using it yet

wont work, screen broken
rzr86 said:
check these
make sure you have enabled usb debugging mode from settings
install htc drivers
install htc sync(i am not sure if it is necessary)
use 2.0 usb ports
use the original usb cable if you aren't using it yet
Click to expand...
Click to collapse
I can't do that because to enable usb debugging mode you have to use the phone and the phone's screen is completely broken and there's no way to even get into it using the touch screen.

ReZnOVO said:
I can't do that because to enable usb debugging mode you have to use the phone and the phone's screen is completely broken and there's no way to even get into it using the touch screen.
Click to expand...
Click to collapse
actually i just re-read your previous post
are yout alking about a sensation device or about the lg optimus g?
if you are talking about the lg then wrong forum
i can't help you further

[GUIDE] solution to unbrick, unknown baseband, dead phone, boot loop etc

I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.

banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Click to expand...
Click to collapse
Awesome u are the best..!!

Mastermind_hassan said:
Awesome u are the best..!!
Click to expand...
Click to collapse
Did you get your phone back to life?

banglastyle said:
Did you get your phone back to life?
Click to expand...
Click to collapse
Absolutely.!!

You are a miracle worker! Took some time but it finally worked! Thank you!!!!!!

banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
THANK YOU! You saved my phone. I can only get it to flash the Wind mobile version but that is a great start and my phone is usable now.

banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
many thanx
only v11h worked out (link here http://forum.xda-developers.com/showthread.php?t=1594396)

My problem is that I'm able to go in NVFlash mode and do the G2X_V21E_00_NVFlash or the One-Click-G2x-recovery but when I try the S/W Upgrade mode, the G2x screen show me the S/W Update image but no devices are found in Windows XP.
I tried with different cables and different PC (even MAC) but no sign of any device connected.
Of course the drivers are installed, if I connect the phone when Android boot up all the devices (modem, serial port, USB...) are properly found.
I probably have an half bricked USB port (I just replaced the hardware connector board, so HW is not the issue) since when the phone is running Android I'm not able to charge it.
To re-enable the charge I go in the hidden menu (1809#*999#) and switch Port Settings> from AP USB to AP UART
I really think is a BaseBand problem (I'm stuck with MAR 27 2011) but without S/W Update working I'm not able to update it!
Someone have suggestions?
Thanks.

fostrike said:
My problem is that I'm able to go in NVFlash mode and do the G2X_V21E_00_NVFlash or the One-Click-G2x-recovery but when I try the S/W Upgrade mode, the G2x screen show me the S/W Update image but no devices are found in Windows XP.
I tried with different cables and different PC (even MAC) but no sign of any device connected.
Of course the drivers are installed, if I connect the phone when Android boot up all the devices (modem, serial port, USB...) are properly found.
I probably have an half bricked USB port (I just replaced the hardware connector board, so HW is not the issue) since when the phone is running Android I'm not able to charge it.
To re-enable the charge I go in the hidden menu (1809#*999#) and switch Port Settings> from AP USB to AP UART
I really think is a BaseBand problem (I'm stuck with MAR 27 2011) but without S/W Update working I'm not able to update it!
Someone have suggestions?
Thanks.
Click to expand...
Click to collapse
I have exactly the same situation, in S/W Update mode no devices are found by Windows, but when boot in Android all devices are found. If you found some solution please publish.

Thank you, Guide worked on my dead phone. Now is live.

I was only able to revive it to the Canadian software and baseband but I already sold my phone so I'm off to bigger and better devices hahahaha
Sent from my SAMSUNG-SGH-T989 using xda premium

thank you this will come in handy
I've had my G2x for a while now had many bugs and lags at start but with ICS Roms i am liking my phone !

banglastyle said:
I have attached .pdf since I am not good at formatting in html here. I have suffered with this phone for two weeks before I got it working again. So, thought I should share it everyone.
Added some more informations. Will attach some pictures soon.
Click to expand...
Click to collapse
I have to thank you for this as it saved my new phone.

thanks a lot
Subtleone said:
I have to thank you for this as it saved my new phone.
Click to expand...
Click to collapse
Finally my partially working G2x is restored to working condition but as mention by others i could only flash the Wind mobile baseband. Even though its usable, the voice quality isn't much clear.
Any suggestions for improving that?

will this work on lg lte lu6200? its dead ive flash a wrong kernel... wont turn on, not charging.. no power or lights at all.

When holding vol up+down and plugging it into my comp, s/w upgrade does NOT pop up :/
I tried the fridge trick; didn't work.
Help?

no s/w upgrade screen
exaphor said:
When holding vol up+down and plugging it into my comp, s/w upgrade does NOT pop up :/
I tried the fridge trick; didn't work.
Help?
Click to expand...
Click to collapse
Holding both buttons vol up + down and plugging in the computer while the battery is out is to install the apx drivers i.e nvidia drivers. It is supposed to remain black. not having s/w upgrade screen is not an issue.

dear, pls i need your help. i flashed preloader and now my phone is dead, i want to try meta mode because my pc is only showing comport when i connect my phone (no vcom). its a galazy A9 6 clone. i found kpcolo and wanted to know if its the same as kcolo / colo? i'd be very gratefull if u can help me out here

battery isn't charging, USB doesn't work

hello guys,
i have 2 Problems with my galaxy R.
My mobilephone doesn't load the battery when i plug in the charger. If i shut down the phone and connect the charger, the phone goes on and the empty battery symbol is drawn an the screen and the refresh logo of the battery is shown. But after 1-2 second's the screen is black and the phone turn off, this repeats the whole time.
When i turn on the phone, it starts without problems, when i plug in the charger it does nothing. I tryed to plug in the charger during the night, and the pho73ne loadet from 59% to 73%.
I have the Galaxy R with 3 Branding (Firmware, which was installed, when i get my galaxy R), but i have rooted the phone and have clockworkMod 4.xxx.
Now, i wanted to flash the firmware again (for warranty, to delete root and clockworkmod), but i cannot connect my phone to the pc. When i plug in the usc cable, my notebook don't recognize my phone and the phone does nothing.
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
I hope you have ideas for me, and sorry for my bad english, i'm from Austria

now i made a video...
see here:
http://www.youtube.com/watch?v=PaOwBfx-J_g

try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX

rostiges_Handy said:
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
Click to expand...
Click to collapse
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM

xlm13x said:
try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX
Click to expand...
Click to collapse
Hey, thank you for your help.
I tried this, but the phone only shows "Warning. A Custom OS can cause critical problems in phone and installed applications. If you want............. Volume up: Continue, Volume down: Cancel (restart phone)
The PC's doesn't do anything while connected via usb cable with the phone
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Thank you too :good: your are a great help for me , but are this files the right ones for the XWLA4 Firmware (2.3.6, 3 Austria) ?

these files will work with all the ROMs
Sent from my GT-I9103 using XDA

Hey buddy! This is what exactly happened with me! This is a physical damage. So there's nothing you can do by flashing other ROMs or stock ROMs or so....
Check out my thread here:-
http://forum.xda-developers.com/showthread.php?t=1663812
I've explained everything about my case and how I was able to revert back to my country's stock ROM, unroot the phone and revert back to stock recovery.
Then I gave my phone for repair to SSC and they told me that it's a physical damage. They changed the whole charging port of my phone. Took 3-4 days though. Depends on availability of that part.
And since my phone was in warranty and SSC guys are dumb, I got it done for FREE!!
---------- Post added at 09:46 AM ---------- Previous post was at 09:37 AM ----------
And please make the video "private" or "unlisted" on YouTube.
We seriously don't want to give any bad impressions to those who are thinking of buying SGR.

pankaj88 said:
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R

vbz89 said:
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R
Click to expand...
Click to collapse
ASK the Moderator

we will tell cooleagle to add these two file to put it in Guide, so that every one can access this when ever required ...

hi guys,
since yesterday I get my phone back. It was repaired within the warranty.
Thank you again ankaj88 you helped me a lot
Now my phone works as it should

my galaxy r problem
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde

aliutak said:
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde
Click to expand...
Click to collapse
Hi buddy, I appreciate that you haven't started a new thread. Could you tell me which language you know ? I am asking because then I could understand your issue clearly.
If you would have searched a bit you would have surely got the answer in the FAQ's post (in the newbie guide thread), check this out:
Q. My device is not being detected on being connected to my PC but I can charge it via the wall / normal charger ! What to do?
First of all check if you have the latest Samsung Kies software installed as it also installs the latest Samsung USB drivers along with it which are required to connect your device to the PC. If they are installed & still your PC doesn't detect the device then you probably have corrupted drivers. To resolve this follow these steps: Uninstall Samsung Kies / Samsung USB drivers currently installed => Restart your PC => Reinstall Samsung Kies / Samsung USB drivers.
Q. I can't charge my device & my device is not being detected after connecting to my PC & Odin is not detecting my device ! What to do?
(The solution is valid only if you are experiencing all of the above conditions simultaneously)
Checkout this thread which could help you: => [Partial Fix] Galaxy R not getting detected on PC nor charging via a charger. ​
Hope this helps.