hello guys,
i have 2 Problems with my galaxy R.
My mobilephone doesn't load the battery when i plug in the charger. If i shut down the phone and connect the charger, the phone goes on and the empty battery symbol is drawn an the screen and the refresh logo of the battery is shown. But after 1-2 second's the screen is black and the phone turn off, this repeats the whole time.
When i turn on the phone, it starts without problems, when i plug in the charger it does nothing. I tryed to plug in the charger during the night, and the pho73ne loadet from 59% to 73%.
I have the Galaxy R with 3 Branding (Firmware, which was installed, when i get my galaxy R), but i have rooted the phone and have clockworkMod 4.xxx.
Now, i wanted to flash the firmware again (for warranty, to delete root and clockworkmod), but i cannot connect my phone to the pc. When i plug in the usc cable, my notebook don't recognize my phone and the phone does nothing.
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
I hope you have ideas for me, and sorry for my bad english, i'm from Austria
now i made a video...
see here:
http://www.youtube.com/watch?v=PaOwBfx-J_g
try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX
rostiges_Handy said:
My question now is, how can i remove root and clockworkmod, so that i can give the phone to the shop for warranty?
Click to expand...
Click to collapse
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
xlm13x said:
try connecting ur phone in apx mode and check that is it a hardware issur or software, to connect in apx mode reinstall ur battery and press VOL DOWN + HOME + POWER keys and plug in usb cable while these keys are pressed, ur pc should detect a hardware named APX
Click to expand...
Click to collapse
Hey, thank you for your help.
I tried this, but the phone only shows "Warning. A Custom OS can cause critical problems in phone and installed applications. If you want............. Volume up: Continue, Volume down: Cancel (restart phone)
The PC's doesn't do anything while connected via usb cable with the phone
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Thank you too :good: your are a great help for me , but are this files the right ones for the XWLA4 Firmware (2.3.6, 3 Austria) ?
these files will work with all the ROMs
Sent from my GT-I9103 using XDA
Hey buddy! This is what exactly happened with me! This is a physical damage. So there's nothing you can do by flashing other ROMs or stock ROMs or so....
Check out my thread here:-
http://forum.xda-developers.com/showthread.php?t=1663812
I've explained everything about my case and how I was able to revert back to my country's stock ROM, unroot the phone and revert back to stock recovery.
Then I gave my phone for repair to SSC and they told me that it's a physical damage. They changed the whole charging port of my phone. Took 3-4 days though. Depends on availability of that part.
And since my phone was in warranty and SSC guys are dumb, I got it done for FREE!!
---------- Post added at 09:46 AM ---------- Previous post was at 09:37 AM ----------
And please make the video "private" or "unlisted" on YouTube.
We seriously don't want to give any bad impressions to those who are thinking of buying SGR.
pankaj88 said:
(1) To unroot flash unroot.zip via CWM
(2) To remove CWM recovery, flash stock_recovery.zip via CWM
Click to expand...
Click to collapse
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R
vbz89 said:
Hey bro, shall we add these files to a stickied thread so that all those in trouble can easily access it? I'm sure it'll be really helpful for many ppl.. Great work!
Proud to own a Galaxy R
Click to expand...
Click to collapse
ASK the Moderator
we will tell cooleagle to add these two file to put it in Guide, so that every one can access this when ever required ...
hi guys,
since yesterday I get my phone back. It was repaired within the warranty.
Thank you again ankaj88 you helped me a lot
Now my phone works as it should
my galaxy r problem
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde
aliutak said:
now I wear neo3.0 firmware. so i want to flash rom to gb 2.3.6 update ics reason want but can not. usb not detect directly. ing any charge. want to follow the phone flash wear CWE install aborde
Click to expand...
Click to collapse
Hi buddy, I appreciate that you haven't started a new thread. Could you tell me which language you know ? I am asking because then I could understand your issue clearly.
If you would have searched a bit you would have surely got the answer in the FAQ's post (in the newbie guide thread), check this out:
Q. My device is not being detected on being connected to my PC but I can charge it via the wall / normal charger ! What to do?
First of all check if you have the latest Samsung Kies software installed as it also installs the latest Samsung USB drivers along with it which are required to connect your device to the PC. If they are installed & still your PC doesn't detect the device then you probably have corrupted drivers. To resolve this follow these steps: Uninstall Samsung Kies / Samsung USB drivers currently installed => Restart your PC => Reinstall Samsung Kies / Samsung USB drivers.
Q. I can't charge my device & my device is not being detected after connecting to my PC & Odin is not detecting my device ! What to do?
(The solution is valid only if you are experiencing all of the above conditions simultaneously)
Checkout this thread which could help you: => [Partial Fix] Galaxy R not getting detected on PC nor charging via a charger.
Hope this helps.
Related
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Try this
manpreet135 said:
Few days later i tried to flash firmware 2.3.4 to my galaxy fit via odin but the process failed and after it my phone does't boot and not going into download mode...the phone has only a blank screen no key is working...when conected to charger a little beeping sound is produced but the screen remain black...then i take the phone to care centre in my area he tried a usb jig but nothing happend the phone still dead...please help me i am in a big problem i love my phone and don't want to lose it...:crying:
Click to expand...
Click to collapse
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
That Does't Work
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Mr.Attitude02 said:
Try this...
1. Install mobile drivers on pc and open Odin.exe
2. Connect phone to pc. Remove the battery.
3. Now, hold down VOLUME(-) and HOME key and POWER key together to get download mode.
4. While holding these 3 keys, (and your phone stll connected to pc) insert the battery.
Now Odin should detect your phone. If still it doesn't , then take it to the center.
If odin detects phone, flash the official firmware.
Hope it helps.
Click to expand...
Click to collapse
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
option 2
here is the thread <http://forum.xda-developers.com/showthread.php?t=1349547>
by Ajay: Thanks to jtag box . I got delhi's dealer's address from official jtag site. I contacted him and he repaired boot with jtag.
he was able to solve his issue.
contact or PM him for ur concern
---------- Post added at 12:35 PM ---------- Previous post was at 12:30 PM ----------
Galaxy_Rohit said:
Exactly what I posted. Thanks for telling...
Sent Via XDA™ Premium
Click to expand...
Click to collapse
hmm
Mr.Attitude02_ROHIT took help from Galaxy_Rohit
just thot ur comment wud solve his prob.
manpreet135 said:
I have tried all the tricks but no one is working even the Technician has tried the JIG but it also give no Help...if you know any other effective hardware or software to fix this problem than pls tell me......and I also heard about JTAG BOX...can this hardware fix my problem?,this should not be as a JIG coz JIG can't solve my problem and from where i can get this if the care centre or technician haven't...
Click to expand...
Click to collapse
Here's the Jtag box dealers' list
http://www.jtagbox.com/category/jtag-dealers/
Here're the shops where you can unbrick your phone
http://www.jtagbox.com/riff-jtag-bo...s-unbrick-bricked-phone-riff-box-owners-list/
And here's the official page of RIFF JTAG Samsung Galaxy Fit GT-S5670 unbrick BOOT REPAIR SUPPORTED
www.jtagbox.com/jtag-news/riff-jtag-samsung-galaxy-fit-gts5670-unbrick-boot-repair-supported/
Sent Via XDA™ Premium
Hi,
I have got Samsung Infuse i997R, which I unofficially upgraded to JB 4.2 and then trying to downgrade, got bricked.
Samsung Kies/ODIN no more detects the phone. And its not switching to Download mode either.
I already used Volume Up+Down options as well as Jig solution. Though, display show me to connect to to Samsung Kies but its in vain.
Can anybody suggest me some way out here to bring life to my phone.
Thanks in advance.
Sachin
You need to give more info on whar happened start to finish. Be very specific. Youre being too vague
sent from my 1920 overclocked note 2 running jedi xp12
[Q] Need Help: Unbrisk Samsung Infuse i997R - Steps
markbencze said:
You need to give more info on whar happened start to finish. Be very specific. Youre being too vague
sent from my 1920 overclocked note 2 running jedi xp12
Click to expand...
Click to collapse
I know I have done some series of mistakes here while playing with my phone android but here is the sequence:
The phone was earlier bear GB 2.3.6 which I have upgraded to JB 4.2 directly using Clock mod & all (the steps available on most of site).
After upgrade I came to know that my IMIE number goes invalid; thus o more phone calls were working.
Followed by this, I tried downgrading it after which my phone got stucked in Download mode.
I accidentally pulled the USB cable post which it was not going into Download mode either and displays the warning message to connect to Samsung Kies.
But now, neither Samsung Kies nor ODIN recognizes it. I tries to get into Download mode again using Volume UP+Down combination as well as Jig but its not working for me either.
Thanks in advance for your help.
Sachin Dhir
Did u try updating\ reinstalling your drivers for odin to recognize your device. Ir maybe a different usb cord?
Sent from my SGH-I317M using Tapatalk 2
markbencze said:
Did u try updating\ reinstalling your drivers for odin to recognize your device. Ir maybe a different usb cord?
Sent from my SGH-I317M using Tapatalk 2
Click to expand...
Click to collapse
I already updated the drivers to recognise the device.
USB cord is same as provided with phone.
Thanks
Sachin
Good Bye Infuse 4G
SachinDhir said:
I already updated the drivers to recognise the device.
USB cord is same as provided with phone.
Thanks
Sachin
Click to expand...
Click to collapse
Had the same problem and seems there is no way out w/out being able to get into dl mode.
I was already on 4.2.2 rom beanstock & wanted to flash a different rom, did all the correct things in the correct order.
What I DIDN'T do was format the system option while in cwm and I have (I think) major incompatibility problems.
ok so if I could get into dl mode i'd could flash back to stock & start over. NOT without a dl screen.
from what I can see & read there is no way out of a hard brick like this.
yes, tried every possible combination of two button, battery in battery out, usb cable in out, different usb ports on computer.
not much help anywhere when in this problem mode.
looking for a cheap i997 & pull the main board & put it in this bricked phone & hopefully get into dl mode.
hello all
after have insert a new rom kpe stock + cfroot kpe i have put in a bad universal cfroot and then nothing after reboot
i think it's bricked or locked only i remark that the batteries doesn't work normaly because the screen one time connected on the adaptator
flash evrey 5 seconds and if i pull the three key (vol- home power) for enter in download mode i can do it but one time in this mode it's not possible to connected odin no com yellow come another solution is to try directly the driver adb samsung but nothing too.
i'm going have to try the usb jig for reset but i don't know what i 'm trying now for debugging or find another solution please help me
if a solution exist but not sure FYI the recovery mode is not fonctionnal.
all solution or idea are welcoming sorry for english language but i'm trying to explain you with my proper term.
jacknew thanks in advance.
did you install Samsung drivers?
If you did not just follow this thread forum.xda-developers.com/showthread.php?p=45871089
---------- Post added at 02:07 AM ---------- Previous post was at 02:04 AM ----------
amsad said:
If you did not just follow this thread forum.xda-developers.com/showthread.php?p=45871089
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45871089
i9003 no usb in download mde
Hi thank a lot for you help but i already use and install a new driver but same problem after
so this is not the driver because i've already try the same test on the mac system with the equivalent sofware of windows under mac this is heimdall and i've the same problem then this is not the driver i think.
i'm going to purchase a usb jig for reset and i will see what happen after the reset.
thank you very much.
A USB jig, is to go download mode, anyhow u still need to settled the driver issue first.
Sent from my GT-I9003 using Tapatalk
chongns said:
A USB jig, is to go download mode, anyhow u still need to settled the driver issue first.
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
hi
how to do that, how i must reinstall usb driver in my phone ?
You have to reinstall drivers on pc, not phone.
U flashed cfroot come from where?
And I think u have boot loop.
If you can go download mode, than u can do flashing stock ROM. Just have to settle your PC driver.
Try uninstall all driver, and shutdown and restart PC (not restart PC), and reinstall again
Or get another PC which never install Samsung driver, install on it and see if Odin can detect your phone.
Or, try different USB port.
Edit: if you flashed other model cfroot, you have no hope.
Sent from my GT-I9003 using Tapatalk
hi all
i think chongns has raison i'm sure i'm flashed with instead of cfroot kpe i've flashed a bagaria 09 gt i9003 pda but normally all sait it's cfroot universal then normally it's not a problem but after reset the phone is briked.
i've already to reinstall usb driver one try on mac one try on windows, sorry severla try.
but i hope always.
FYI
i've alredy swap the usb cable
swap Os mac windows
Reinstall usb driver
try from odin/heimdall usb detection no good too
Strange Thing
battery life seem to be not good
when i connect the usb charge the screnn is blinking every 3, 5 seconds
and the batterie is not in charge when i've connected it to the usb power
cy u soon
thanks for your help
jack
Hello xda members
I have an GT-I9300 device which stucks on TWRP Recovery (teamwin logo excatly) and flashes about after 4 or 5 seconds.
No twrp options , my pc doesnt react when i plug in my phone , only download mode available and an SD Card.
Can i unbrick my phone or not ?
Hello,
Yes, you can flash your stock firmware through Odin 3.10 and fix your device. Look in the thread linked below for instructions, if the download link for your stock firmware is dead then try going to Sammobile.com and search for your stock firmware using your model number GT-I9300, download it and then follow the instructions below.
http://forum.xda-developers.com/galaxy-s3/general/restore-to-stock-rom-galaxy-s3-i9300-t2187081
Good luck.
styno said:
Hi,
you can recover the GT-I9300 completely with Samsung's own Kies. It will ask for the serial number of the phone and will download all files needed and flash it for you.
You'll end up with a complete stock phone (but with latest modem )
Good luck!
Click to expand...
Click to collapse
Kies and Odin dont recognize my device
Any other suggestions?
Edixh said:
Kies and Odin dont recognize my device
Any other suggestions?
Click to expand...
Click to collapse
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Droidriven said:
Have you verified that your drivers are installed correctly?
Post your issue in the forum I gave you the link to.
Click to expand...
Click to collapse
Yes bro i have installed them so many times and restarted PC but nothing happens when i plug in my device
styno said:
Just to be sure: you used kies3 - emergency recovery and got the phone into download mode?
Click to expand...
Click to collapse
Yes but kies and also kies3 doesnt start the process .
TDizzle329 said:
Are you putting the device into download mode?
Power the device off (pull the battery, then put the battery back in), then hold VOL DOWN + HOME KEY + POWER KEY
Once in download mode plug into your PC. Also make sure that you have the Samsung drivers installed. Check your device manager on your PC to make sure Windows is seeing the device.
Click to expand...
Click to collapse
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Edixh said:
I have done that but my pc doesnt even show any signs of my phone when i plug it in.
I looked at Device Manages also
Click to expand...
Click to collapse
Try different USB ports, make sure you have the stock cable.
Hi Guys,
For unknown reasons my fone went DEAD (BLACK SCREEN... NOT A SINGLE SIGN ON CHARGING OR USB).. Need advice what to do ??? is it dead or can be brought back to life by FLASHING ???
Any senior member or someone please help me ...
If you connect to pc how will it be?try charge it first.then connect to pc.if detect, flash stock rom.if cant,try find spare battery just in case.
FOne is not showing any charge sign or anything... just QD LOADER 9008 in Device Manager
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
---------- Post added at 08:07 PM ---------- Previous post was at 08:06 PM ----------
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
Try connect to kies.does it detect or not? if you able to flash. try flash it to 5.0.1
What was the battery level (approx.)when the phone died?
You might want to try cleaning the battery and internal phone contacts with some Isopropyl Alcohol and a Qtip.
See if that helps.
Sent from my SM-N915W8 using XDA-Developers mobile app
Tried Everything... NEW BATTERY... But fone is not showing Charge on Adaptive not even on USB on LAPTOP... Just Qualcom Loader 9008 in Device Manager...
Asheque said:
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
---------- Post added at 08:07 PM ---------- Previous post was at 08:06 PM ----------
Do you see charging light when you plug in the charger?
As long as the phone receiving power you can fix it.
Click to expand...
Click to collapse
Around 76%
As u can seee ONly Qualcom device in Device Manager.....
basirbilal said:
Hi Guys,
For unknown reasons my fone went DEAD (BLACK SCREEN... NOT A SINGLE SIGN ON CHARGING OR USB).. Need advice what to do ??? is it dead or can be brought back to life by FLASHING ???
Any senior member or someone please help me ...
Click to expand...
Click to collapse
Hello, did you find a solution? I helped the image of the zero block recorded on the sd-card with the program "win32 disk imager" 915F
asmixo said:
Hello, did you find a solution? I helped the image of the zero block recorded on the sd-card with the program "win32 disk imager" 915F
Click to expand...
Click to collapse
No Sir still no solution of this problem
I helped a good man, he sent an image of the device. I recorded this image of the sdcard and the device will start with "Download" mode. Next, it is necessary to firmware flashing.
915F - sorry - region "SER". But the main thing - is to run the device, further will flashing firmware what you need.
Site do not give insert a link to a file. Write me in the mail - "[email protected]" I'll send a link to file/
Write the file need with program "win32 disk imager". If this method does not help is probably a problem with the hardware.
Good luck.
As per the screen shot posted it seems your pc picked up the correct driver. Now all you need to install is Odin. Then go to samobile.com and search your phone under Firmware. Make sure you got the exact model (pull out the battery and look for exact model #). Once downloaded go to Odin and check AP and select the file you downloaded. Then put your phone on Download Mode by pressing Vol Up + PWR at same time. Follow the instructions on your phone screen.
Once you connect your phone to pc it will show up as Port 3 or 4 or wherever the driver is connected to.
** As long as on Odin your phone gets picked up you will be able to push the firmware. Once you can do that you pretty much fixed it. If it's wtong fw then you will get a notice right away, if it's correct then you see the progress bar changing.
BL is corrupted, need to repair it,
Since this is a Qualcomm based device, you can flash only BL files to an SD Card then boot your device from that card until you get into Download mode,
then reflash the device with Odin,
Follow this guide:
1. Download debrick (BL) file from HERE,
2. Download Win32DiskImager from HERE,
3. Get an 32GB SD Card and connect it to PC,
4. Setup Win32 and Run it then do as the following picture,
5. Just let it finish, Then disconnect the SD Card,
6. Make sure the device's battery is well charged,
7. Put the SD Card into the phone,
8. Now you need to boot device into Download mode either by using USB JIG or by holding (Vol-, Home and Power),
9. Once device boot into Download, Pull out the SD,
10. Now just flash the phone with Latest FW (either Factory or One-Package will do the job),
11. There is no 11, we're done ..
##NOTE: Solution is TESTED and it works.
@mirosaw2 Will this also work with the SM-N915FY? Will this keep my data (contacts, SMS, photos etc) on the internal storage? I have my SM-N915FY in a state where it wouldn't recognize any commands, but it makes a connect / disconnect sound on my Windows computer when I just connect it via USB...
My original question is here.... https://forum.xda-developers.com/note-edge/help/note-edge-sm-n915fy-bricked-dreadful-t3754559
Edit: I just tried it and it worked!!! Thank you very much, now I'm able to restore my data and then I'll try to make the error gone with this tutorial: https://forum.xda-developers.com/showpost.php?p=66879466&postcount=10
My N915F stuck at Nand write start and the guide does not work.What else to do?
similar Problem
I have a note edge too, device flashed with stock firmware first but no luck, tried repair firmware and odin froze, talked
to experts and they said the partition is corrupted, device is stuck in "problem encountered while upgrading firmware . connect to kies and try again." how to fix ?????