My phone is die because turn off PC when uprom ?
It's not turn on , not signin bootloader... Hepl me
No bootloader = gone
Someone tried to pry open the phone to JTAG the ROM but they reported back that a metal cover is protecting the ROM chip from being JTAG
So conclusion, sell your phone for scrap
thank u so much but i tried open my phone but haven't got Rom chip (Flash chip ?) replace it. i'm live in Vietnam. JTAG is what??? i don't known.
blackpuck said:
thank u so much but i tried open my phone but haven't got Rom chip (Flash chip ?) replace it. i'm live in Vietnam. JTAG is what??? i don't known.
Click to expand...
Click to collapse
If you can't get to the bootloader, your phone is dead. Give it up.
noone can help me ????
I don't think anyone can help. Since there is no bootloader, you cannot do anything. Plus you wrote that you have SDA2, which is not HTC Tornado.
I assume you also can't perform a hard reset?
http://en.wikipedia.org/wiki/JTAG
JTAG is a (physical) connection to the ROM chip to program it. You need special equipment and expertise to reprogram your phone this way, but if it's dead otherwise why not give it a try and open your phone .
Be sure to make some pictures and post them here .
Or go back to the store, try to look really innocent and have the manufacturer fix it for you (this probably won't work btw).
Someone tried to JTAG but the ROM chip is blocked by a metal cover
Hi... I have 2 sda tornado phone but I want to do one
hi...
please I would like remplace a rom (os) chip because I have a brick (white screen) tonado and another that is broken the mainboard..
bur If I know which is the chip flash I could be remplace and have one good phone..
thanks...
I have a silly question.... When you place connect your phone to your pc... Does windows do that sound as recognizing that something was connected? If so... Try to flash the T-Mobile SDA Ship ROM. You don't need to be on bootloader to flash a ship rom, as long as windows recognizes that something is there. The "enter boot loader" in the Rom Flashing will take care of that. At least.... it happend once for me when I was sure I had bricked my SDAII. Also, My SDAII does say its a Tornado. However, I have read many say that SDAII's are not tornados. Confused.
hi... the problem is that when I connect to pc, the pc can´t recognize... can´t acces to bootloader just I have a white screen.... I´ve tried with activesync, mtty, TeraTermPro but nothing....... first I upgrade to windows 6.1 perfect english and all perfect (I unloked the phone, I follow all steps to upgrade the phone and works) but the problem is the when I tried to downgrade to t-mobile official rom....
When you place connect your phone to your pc... Does windows do that sound as recognizing that something was connected? NO
If so... Try to flash the T-Mobile SDA Ship ROM. You don't need to be on bootloader to flash a ship rom, as long as windows recognizes that something is there. i CAN´T ... DON´T RECONIZE
The "enter boot loader" in the Rom Flashing will take care of that. At least.... it happend once for me when I was sure I had bricked my SDAII. Also, My SDAII does say its a Tornado. However, I have read many say that SDAII's are not tornados. JUST WHITE SCREEN AND CAN´T ACCESS TO BOOTLOADER O REBOT THE PHONE... I THINK THAT I damage THE SLP (BOOTLOADER)
Confused.
Related
Can someone upload an old ROM for the prophet? I can't start up my prophet, but I've got it in bootloader. So I nedd a little bit old ROM so I can install on it.
Understand?
Thanks!
Look for the first link here http://forum.xda-developers.com/showpost.php?p=1166927&postcount=2
Are this ROM old ROM?
Not really old but if your phone stuck in bootloader this one is ok
I can't make it, it says that i should connect to Active Sync, and how im I suppose to do that?
Go in bootloader (screen with 3 coulours) by Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and keep pressing camara button till appear the Boot Loader.)
When you are in bootloader logicaly your PC must detect the Prophet, then run the update
Sorry for my bad English but I'm Franch
Yes i've got it in bootloader, and its stands USB on the PPC screen. But it aint the Active Sync that finds it, it says "Uknoknown Unit" or something when i connect them together..
Active Sync isn't a problem, update work or there is an error message?
In right corner down on the PC sreen it comes up "A unkknown Device connected" or something like that, nothing more is happening..??
It sayd that it can't recognize the unit..
Qtek_S200 said:
It sayd that it can't recognize the unit..
Click to expand...
Click to collapse
In bootloader mode, on connecting via usb ,if u r getting 'USB' written on left down corner of ppc then ur ppc can be flashed via proper RUU and nk.nbf
Be sure that this nk.nbf dont include ipl/spl parts for risk free flashing and for not getting brick device.
thanx
nandlal
Im trying to flash a ROM with that, but it coming up on the screen that "Not connected". It's standing that i nedd to connect with Active SYnc!!
could somebody upload an ipl/spl lower than 2.09 or higher but not 2.09^^
rest doesn't matter language english or german would be good...
probably, i dowgrade my kaiser with lower version...(everything passed(unlock,flash)without problem and error...
after flash phone dead... nothing happen when try to power on,reset,boot,anything...try,almost 4 hour, everything what can find here, but still no luck...
no power, no bootloader, even i can't do anything with mtty couse i run Vista, and have prob to stop activesync working... everything what i got is
ZTE diagnosstics interface 6000 cdma 1x(com5)
zte nmea device cdma 1x (com6)
in my control panel/device manager,
that talking maybe phone is not totaly damage...
anyone help, any idea...this will be long long night...
I'm not sure what you mean exactly but I also had a dead Kaiser. It did not happen after flashing but my phone suddenly turned off and could never be turned on again. I first thought it was a battery issue but no.
Finally I returned it to HTC and they replaced the motherboard under warranty.
yes but my kaiser is not in warranty, customer buy it in Italy... and I kill him, sad but true...
well i might not be correct, bu it looks like you wiped the nand on the phone... i think if you look up the steps in the frankenkaiser thread it should help you out
but i can't go in bootloader mode....
if you look you dont have to enter bootloader mode..: http://forum.xda-developers.com/showthread.php?t=394584
ok, first , from now i'm on XP...
but always same... when attach in any button combination to the pc, it was always see the same, look on the pic
and in MTTY, i have the port from 1 to 10 &usb. on usb cannot connect, with the error "usb port can not open"
btw forgot to write, device is brand new, no hw damage
i make connection between kaiser and MTTY, over diagnostics port, but when try to type command(or Enter) nothing happens. how to use MTTY
as i see my kaiser stuck in download mode... (see in QPST & QMAT)... how to flash it or to restore it to normal mode(phone no power on, no going to boot mode)... i read emi&sbi, if it can help some...
if you look here from step 3 down i think this should walk you thru the process... http://forum.xda-developers.com/showthread.php?t=393337
if you look at the part right below step 2 it says to lower your com port for the diagnostic interface below 10, i think i saw that yours is set to 53...
i try on 3 differnet pc. try all comm port. mtty is my problem(one of them). when run mmty(choose connection base on diagnostic port), i can type anything, any command, enter,etc... nothing on screen, nothing happen after enter...
can someone explane how to flash kaiser via jtag...
someone who allready do it...
or send me to pm
Sorry no idea!
Hi mobilend,
i just saw your message... no idea about that!
Don't know if anybody already traced the testpoints.
You also would need some software tools to access the MSM chip.
Maybe i'm wrong but i read some threads about this kind of brick and maybe your able to recover without JTAG.
Perhaps the kaiser cracks could help you out
Regards,
scholbert
i do nothing since today...
if somebody have idea how to unbrick kaiser with jtag, write here or i may send device to him...
Problem
Hi excuse you have succeeded there?
I have yours same problem.
This is my fear, for this reason I have not had the courage to update my ROM.
I do not understand, the videos appear to be so simple, but at the same time, to read topics like these, I am in panic ...
Will I still be aware and courageous enough to update my ROM?
jonastamborin said:
This is my fear, for this reason I have not had the courage to update my ROM.
I do not understand, the videos appear to be so simple, but at the same time, to read topics like these, I am in panic ...
Will I still be aware and courageous enough to update my ROM?
Click to expand...
Click to collapse
Most of the problems come from not reading the information...
If you look at the number of users on here that have managed to upgrade their phone you will see that it way outways the number of people who have truly bricked thier phone. (A lot of the people who have upgraded thier phone have little knowledge about what unlocking means as well, so don't worry if it's a bit overwelming).
If you want to get started click "KAIS: Getting started" in my sig for a step by step guide by mskip. mskip, myself and some other members will help out with any questions you post in that thread. Also check out the info on the HTC Kaiser wiki page on the xda-developers wiki page.
Ta
Dave
i flashed from SD my eten X650 with the original rom from X500 by a mistake.
is there someone to help me solve this problem.
it can boot now from sd.
BUT
if i press(camera+power+reset0buttons my pc recognize it likeMICROSOFT USB SYNC devise but it can conected with microsoft active sync
please help me and ican pay someone if he make it work again with 50€
bear79 said:
i flashed from SD my eten X650 with the original rom from X500 by a mistake.
is there someone to help me solve this problem.
it can boot now from sd.
BUT
if i press(camera+power+reset0buttons my pc recognize it likeMICROSOFT USB SYNC devise but it can conected with microsoft active sync
please help me and ican pay someone if he make it work again with 50€
Click to expand...
Click to collapse
Just flash it with the rom for the X650 and you'll be back to your old self. The fact that it can still boot is a good thing since apparently you did not brick the device.
when i try too boot my X650 my screen becomes white and nothing hepens.
then i connect it with pc and recognize it.
i thing that i can flash it.
any other solution?
thanks
Flash from your pc then if your pc recognizes it. By pressing camera+power+reset0buttons i'm guessing you are talking about the bootloader.
yes.for bootloader menu i am saing.
how i can boot it from pc?
if you are stuck in bootloader, then your pc will not recgonise the devise for activesync (or for the RUU software), i think you have to use mtty
i think thay mtty is only for HTC or i am wrong?
This is exactly why we are always telling people to read before doing these things, so that they do not mess up their devices.
Anyway, get your device in bootloader mode and connect it to the PC. You must kill Active Sync (I am assuming that you are using Windows XP and not Vista). In order to kill ActiveSync, you must open the Task Manager and kill the processes called rapimgr.exe and wcescomm.exe.
Once you've done that, you must run the upgrade/rom upgrade utility program in your computer and follow the instructions on the screen. [highlight]Please make sure that the rom that you are using is specific for your device.[/highlight] Otherwise, you will brick your device for certain...
Note that upgrade instructions are, under most cases, device specific. Make sure that you follow the instructions in your upgrade precisely. Most rom cooks post either Readme.txt files along with their roms or they post very precise instructions in the forums. What I just gave you here is a very general set of instructions that normally work for most devices. I do not have an Eten (never have), so I am uncertain if these instructions will be useful to you. Follow them under your own discretion. [highlight]I am not responsible for any damage to your device.[/highlight]
Good luck...
it ask me again to connect wiyh active sync
Ignore. was moved
HELP mE please
soo no solution has found
bear79 said:
soo no solution has found
Click to expand...
Click to collapse
Just read my post. If the device is in bootloader, it should not try to connect to activesync, the pc should only see a USB device. Look for a rom upgrade for your phone and look at the upgrade instructions and follow them exactly. Your phone is not bricked, it only needs to be re-flashed.
i have tried that but nothing heppens.
when i try too put it in bootloader menu my sreen becomes white.
is this bricked phone?
Yes if you cannot get into your bootlaoder, it is bricked.
Hi there, I tired to issue my problem in some other threads, but without any response so far - probably my problem is more specific.
I was using AHEN 6.5-R6i Rom for few weeks when some time after charging my Raphael was not powering up at all. I presume no relation between Ahen rom and the problem (as described further).
I bought new battery and it occurred that probably power charging circuit was damaged, because it newer completed charging, the device was always very hot and discharged in few minutes even when turned off (until completely drained out). What is more the USB connector works only for charging (maybe damaged data connection circuit?).
As a result, before returning the device for guarantee servicing I wanted to downgrade all the roms to the original ones. As advised I started with Radio and OS stocks, but after bootloader update (from SD card, cause my USB doesn't work) I got only "upgrading ROM code error" and the device tries to load some ROM, but putting any on SD card doesn't work anymore.
Any suggestions how to cope with this situation?
If you need help please provide us with important information. So fill your signature first. Mainly if you have hard-spl or if you bought olipro cid unlock and what exactly you have done until now. Also wether your device is CDMA or GSM? If it is GSM than you have to first restore Stock Radio first, after that if you cid-unlocked the phone you have to relock it again. Than remove hard-spl and install stock ROM. But if your USB is broken, i think there is no chance to remove Hard-SPL neither to restore to stock. Remember that when you are in a bootloader and you do not see that the device is connected to activesync or Windows Mobile Device Center it does not mean that it is not connected. Just check you hear the sound indicating that something is connected to usb in vista or windows xp.
If you need help please provide us with important information. So fill your signature first.
=> done
Mainly if you have hard-spl or if you bought olipro cid unlock and what exactly you have done until now.
=> chnged SPL to OliNex, OS to AHEN 6.5-R6i, Radio to version required by AHEN rom
Also wether your device is CDMA or GSM? If it is GSM than you have to first restore Stock Radio first, after that if you cid-unlocked the phone you have to relock it again. Than remove hard-spl and install stock ROM.
=> I retracked the changes as indicated changing both radio and OS to original ones, but had just problem at last step = flashing oryginal SPL (because I made it from SD).
But if your USB is broken, i think there is no chance to remove Hard-SPL neither to restore to stock.
=> Hmm, anyway right now I am stack because bootloader is "loading ..." every time I reboot the device.
Remember that when you are in a bootloader and you do not see that the device is connected to activesync or Windows Mobile Device Center it does not mean that it is not connected. Just check you hear the sound indicating that something is connected to usb in vista or windows xp.
=> I tried to use some terminals to see if I can execute commands directly or see any output, but I haven't even succeeded to open the port. Maybe I am doing something wrong - I give it a try once more tonight.
So what version of SPL is bootloader showing? If it's showing something like 1.90.0000, you are in bootloader and USB circuit is not damaged you should be able to normaly flash ROM from your provider from bootloader. So download the ROM from your T-Mobile it should be some exe. When you see bootloader tricolor screen coonect usb cable from Touch Pro to computer and run the exe soubor with your desired ROM. It should work if everything is OK!
If your device is showing 1.90.OliNex, than i cant help you because i do not know how to remove Hard-SPL from bootloader, maybe it is possible, but for more experienced tech guy, who i am not
PS: Hope you did not bricked your device because Hard-SPL and removing Hard-SPL is all done with cable, you cant do it from SD, and you cant flash original SPL before removing Hard-SPL!
hmm, it seems that I have managed to flash, at least partly, the original SPL from SD card, cause it shows version 1.90.0000. Partly, because it states that the previalus rom update was not successful :-(
In this state (in boot loader mode) I can't even charge battery so I have to do it externaly. Connecting to PC doesn't work (PC USB and cable are fine). The only thing that change after connecting to USB charger is that device gets hot ...
i am sorry to say, that you probably bricked your device... Maybe someone could help with more advanced hardware, software support, but i am not the right person...You can try to put your device to service and hope they will not recognize what have you done, but it depends on your stock SPL version. I got czech T-Mobile and stock SPL was 1.69.0000, so maybe yours was the same...
Next time please read more carefully, search or ask someone if you are not still sure, things about flashing SPLs are very dangerous if they are not done carefully...
Can anyone help this guy? He tried to flash original SPL over Hard-SPL, and therefore it is not looking very well for him to unbrick his Touch Pro...
So ... I got it from the service and they changed the motherboard and the battery, no charges
It was brickes, because of cherging circuit issue.
Unfortunatley I send it back to service, because the loudspeaker is not working ...
Actually I am the same exact boat as the OP. My phone stopped charging and its because the USB port is broken. I need to change the phone back to stock but if its not charging its probably not going to get a connection to the computer either. I read that on at least the Hermes it was possible to flash from the SD card. This is not possible for the TP? Thanks
riotburn said:
Actually I am the same exact boat as the OP. My phone stopped charging and its because the USB port is broken. I need to change the phone back to stock but if its not charging its probably not going to get a connection to the computer either. I read that on at least the Hermes it was possible to flash from the SD card. This is not possible for the TP? Thanks
Click to expand...
Click to collapse
You can flash the ROM, radio, splash screens etc etc from SD card - you will then have to send the phone back with hard spl still installed as you need a usb connection to remove it.
Dont assume you cant get a usb data conenction though - try it and see!
I did try the connection, didn't work. How do you flash from the sdcard? I just dont want to brick it.
Please read this thread on how to flash (including how to flash from SD card).
Again, (assuming you have the correct hard SPL currently flashed) you can flash a ROM, radio & splash screens etc to your phone from the SD card (one at a time) but as previously said you need a USB connection to flash hard spl (dont attempt it from the sd card).
So, my Raphael arrived from service after the second repair (loudspeaker not working) - it seems all works this time
By the way, that is correct that a USB connection is necessary to flash hard spl, but .. I was desperate because the USB was broken, so I tried it from SD. The effect was good enough for the service - the Hard-SPL seemed to be reverted to oryginal one, however the booting was stacked at loading the ROM
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix