Database Info

att kaiser cannot be flashed

I am trying to isntall a new rom from some availabe in the kitchen but when it it tries to start to write it just stuck on the 0% and have to reset it again. Even hardspl same problem !! its an att kaiser from america arrived few days ago from ebay.
Can someone help me out please !!!
Radio info :
kais1*0
spl-1.93.0000
cpld-8

DON'T try to install a custom ROM without installing Hard SPL first. If you have problems installing Hard SPL, read the hard SPL thread for more information.

Deo said:
I am trying to isntall a new rom from some availabe in the kitchen but when it it tries to start to write it just stuck on the 0% and have to reset it again. Even hardspl same problem !! its an att kaiser from america arrived few days ago from ebay.
Can someone help me out please !!!
Radio info :
kais1*0
spl-1.93.0000
cpld-8
Click to expand...
Click to collapse
Have you read the 2 stickied threads right at the top of the main page of this forum about Hard-SPL? If not, then you didn't install Hard- SPL first. And if you didn't install Hard-SPL (and according to your quote it does not look like you did), then you are lucky that you have not Bricked your Tilt yet!
Read the following links as well as the Kaiser wiki and search for more info.
Link1, Link2 and there is a 3rd thread in this forum that talks about Hard-SPL on devices with the newest drivers on them.

Can't bootup after flashing Radio 1.64.08.21

Need anyone help to un-brick my Tilt.
Have a fresh AT&T 8925 and did following.
- Got offical unlock code from AT&T and done with unlock
- HardSPL v1 (Works and show the correct SPL version when on tri-color screen)
- Install Radio ROM only version 1.64.08.21
Flashing say successful but cannot bootup.. Still be able to see the AT&T splash screen but never see Windows Mobile bootup screen and screen goes black.
I checked the forum late after and found it is only support with WM 6.1 which i beleive it is the issue i have.
Can I have anyway like bootup mode to restore original Radio Rom 1.27.12.11 or just flash any WM 6.1 cooked rom to solve it.

flippy_tv said:
Need anyone help to un-brick my Tilt.
Have a fresh AT&T 8925 and did following.
- Got offical unlock code from AT&T and done with unlock
- HardSPL v1 (Works and show the correct SPL version when on tri-color screen)
- Install Radio ROM only version 1.64.08.21
Flashing say successful but cannot bootup.. Still be able to see the AT&T splash screen but never see Windows Mobile bootup screen and screen goes black.
I checked the forum late after and found it is only support with WM 6.1 which i beleive it is the issue i have.
Can I have anyway like bootup mode to restore original Radio Rom 1.27.12.11 or just flash any WM 6.1 cooked rom to solve it.
Click to expand...
Click to collapse
Flash to one of the shipped ROM's that are located in the Kaiser Wiki.
Try the one w/ the radio 1.27.11.31

Press the camera button and Reset button to enter Bootloader mode, then reflash your Radio ROM =) !
*Note: Flash a rom compatible for WM6

I am trying to Hard Reset now and showing up something now, not sure it work or not. If not.
Can I any guideline to read how to flash Radio Rom under Bootloader mode. Thanks...

Just enter to Bootloader mode.
In pc:
Make a folder with the radio rom and the Kaiser customRUU on it.
Then connect the phone to the pc.
In pc:
Run kaiser RUU...
***Flashing***
Done!!
now it Must work.. =)
Saludos!

Can i flash rom in bootloader?

i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.

ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?

i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.

ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?

IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.

ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.

mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!

Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.

Please help the Kaiser shows only bootloader and "serial"

I tried to update HardSPL 3.29 on my friend's Kaiser from AT&T. But it still stucked.
I run SDA-Unlocker .It shows ok.
After serveral tries the phone stucked So i use Kaiser SuperCID and Security Unlocker v0.1 by ockyw2001SPL and do step 1. I don't know what i have exactly done.
During copy it stays at 95 % !
Now every time i boot the device it shows only the bootloader
KAIS1*0
SPL-3.56.0000
CPLD-8
Seial
I can't upgrade other ROM any more.
I think i should take HardSPL 3.56force USB ? because ATT already has SPL 3.56 and WM I 6.1
What have i to do now ? I'm a little confuse because the phone of my friends. That is the gift from his brother. :-(

read this then go to the sticky at the top of this forum and follow the links to the right thread for you to ask this in, good luck.

Ok ! I folow http://forum.xda-developers.com/showthread.php?t=420683
and tried to flash SPL 3.29 again. But it still stucked at 0%.
I will try the SD version.
Other question: should the battery loading at in bootloader ?

Hi,
Try re-flashing the stock ROM for the phone. You'll either find it on the wiki or on your carriers website.
Any more problems, please post in this thread : http://forum.xda-developers.com/showthread.php?t=423486 (after reading the 1st post o/c)
Dave

black screen after KaiserUnlocker without HardSpl

Hi
I've a quite big problem that occured form my stupidy.
I wanted to unlock the phon and get rid of simlock.
I've read the wiki and start playing with kaiser. I forgot to run the HardSpl and go just to KaiserUnlocker. First step was ok 100% reboot, second step - 100% rebot splashscreen 1, splashscreen 2 without sound and after that black screen.
AS is not turning green, screen is black, buttons doesn't work.
I've done HR and after that i fought it's ok there was a splashscreen with windows mobile, algin the screen, time etc. and after that the OS is automatically upgraded by some files from AT&T. After upgrade there is splash 1 with AT&T logo splash 2 with another AT&T logo and nothing more - black screen again.
Before my playing time I had WM 6.0 Prof from AT&T, R 1.27.12.11
Now when I'm entering the bootloader I've
on the top "Security Unlocked"
on red stripe KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
What can I do now?

miffalek said:
Hi
I've a quite big problem that occured form my stupidy.
I wanted to unlock the phon and get rid of simlock.
I've read the wiki and start playing with kaiser. I forgot to run the HardSpl and go just to KaiserUnlocker. First step was ok 100% reboot, second step - 100% rebot splashscreen 1, splashscreen 2 without sound and after that black screen.
AS is not turning green, screen is black, buttons doesn't work.
I've done HR and after that i fought it's ok there was a splashscreen with windows mobile, algin the screen, time etc. and after that the OS is automatically upgraded by some files from AT&T. After upgrade there is splash 1 with AT&T logo splash 2 with another AT&T logo and nothing more - black screen again.
Before my playing time I had WM 6.0 Prof from AT&T, R 1.27.12.11
Now when I'm entering the bootloader I've
on the top "Security Unlocked"
on red stripe KAIS1*0 MFG
SPL-1.0.OliPof
CPLD-8
What can I do now?
Click to expand...
Click to collapse
Run the ATT updater from HERE it "SHOULD" Put you back to stock. Then run the hard SPL and try unlocker again. I have found that I needed to upgrade to 6.1 before the unlocker would work. Hope this helps

Great thx but how should I do that, kaiser is not conectg with PC througth AC.

miffalek said:
Great thx but how should I do that, kaiser is not conectg with PC througth AC.
Click to expand...
Click to collapse
Hold the camera button when you turn it on. That will take you into bootloader. I am not sure if this will help for sure but it is worth a shot

Oooo it's a ROM i connect via USB and run just the exe

miffalek said:
Oooo it's a ROM i connect via USB and run just the exe
Click to expand...
Click to collapse
Yes it is the att 6.1 update stock rom.

Or use SD card method. But you need to read WiKi for that...

Best will be to "update" to 6.0, flash HardSPL 1.0 from Olipof, flash older HTC ROM (by HTC, not ATT) repacked (with OS only, no radio or SPL) and then unlock, because newer AT&T 6.0 ROM doesn't work with the radio from SIM unlocker.
The same happened to my friend

Ok so which ROM do you suggest?
I've looked at Wiki at Kaiser_ROMs and there is planty of them
I can try every on of them but from recent 'trying' I have only problems now

I've tried the solution send by zelendel with WM 6.1 it's runing up but there was alsow a customization and I runs it works thanks a lot Now HARDSPL as first

miffalek said:
I've tried the solution send by zelendel with WM 6.1 it's runing up but there was alsow a customization and I runs it works thanks a lot Now HARDSPL as first
Click to expand...
Click to collapse
Yeah that was all the AT&T crap. Let us know how things go.

Ok
Phone is unlocked but I've another problem after putting the sim card the phone runs fine for few seconds and then it stops, the vibrations is on all the time and camera isn't working at all and there is no sound (black screen).
Is it one more time OS?
I've instaled WM 6.1 AT&T

miffalek said:
Ok
Phone is unlocked but I've another problem after putting the sim card the phone runs fine for few seconds and then it stops, the vibrations is on all the time and camera isn't working at all (black screen).
Is it one more time OS?
I've instaled WM 6.1 AT&T
Click to expand...
Click to collapse
Ok now that you have a hard spl install What radio and spl do you have? The radio is your camera prob. I would pick a custom rom and flash it with the prefered set and see how that goes.

So, with the first rom - WM6.0 it showed 1.27.12.11 then I flashed device and it was 1.70.olinex, another flash the WM6.1 and it was 1.65.21.18 and now after hardspl it is showing again 1.70.olinex
It's from the splash1 with the R in front, am I correct ?

Hi
One question more I've a problem with signal I don't loos it but it's weak - one or two lines in the middle of city. I switched to HTC original OS WM6.1 radio is 1.65.16.25. Should I switch the radio ?? If yes which one will be the best ?
Regards

miffalek said:
Hi
One question more I've a problem with signal I don't loos it but it's weak - one or two lines in the middle of city. I switched to HTC original OS WM6.1 radio is 1.65.16.25. Should I switch the radio ?? If yes which one will be the best ?
Regards
Click to expand...
Click to collapse
The right radio is such a subjective combination of variables, that no one call tell you which is the best for you. Just go to the Ultimate Radio thread and try a bunch of 6.1 compatible radios until you find on to stick with.
Start with the radio that is recommended for the rom that you are using and then try radios that are in other peoples signatures.