Database Info

Qtek 8310 charging problem

Guys, i think i have a problem with my Qtek 8310.
Whenever i try to charge it with the charger, it will show the amber light indicating its charging from some time and after that it will just shutoff itself and start to blink in red light.
i tried to charge the qtek battery with my other smartphone (SPV C500) its charging properly. I tried to charging it with other charger also, unfortunately no luck.
i started encountering this problem only yesterday onwards.
nowadays, i am charging it through my computer USB and it charges without any problem. Anybody had this problem or heard of a problem like this. Any help is greatly appreciated.
thanks
Krishna

hi, I have the same problem with my 8310 (1 month old)
the AC adapter doesnt work correctly with the phone
I thought of using another adapter, but I see that you already tried this
the only solution that my retailer gave me, is to make it exchange..

I have the same problem, but if I connect the wifi when I charge it, it works fine....

Really weird problems... Do these happen even when you use the original chargers? Maybe should go back to the store...

I have the same, but i upgrade to Imate ROM 2.5. It fix problem. Now charging well.

I have received a 8310 with the USB-miniUSB cable. I am trying to use it for the first time. When I first started it, it powered on, showed windows mobile, and afte that the battery died, so I cannot power it on. I am trying to charge it with this USB cable. Is it possible when the phone is off?
Should it start charging it when I plug it in in the PC USB port?

And how much time does it need to be fully charged when charging from PC over USB cable?

use USB for rechage?

i don't have charger .can i use USB for it?thank you

With WM6, yes, it works.
With WM5, no...

[email protected] said:
With WM6, yes, it works.
With WM5, no...
Click to expand...
Click to collapse
Some guy in a different forum said that his 750 charged even with WM5. He said that you didnt hear the charging soud nor did you see the charging battery icon but that his charge gradualy went up. I havent noticed this myself though....

I can confirm that my WM5 750v does charge using the USB sync cable. No noise, no charging light, but it does charge.

Works on my WM6 ROM.

it doesn't ,because i put it on charger all night,battery 30%!

mat gues is that USB cable give it enough power not to discharge while conected but not to charge so if ur treo is inactive while on usb cable it will charge slowly
but if e-mail get deliwered over GPRS/EDGE etc, Alarms going off incoming text meseges coming and other things that force device to activate it will not charge.
maybe turning off Phone bit of treo (holding red button) will help charging through USB !!
P.S am not shure about these its just my idea !!!!

Yes, have to admit it is slow.

On WM5 I have seen my Treo charge on USB when connected to some computers but not others. On WM6 it works on all of my computers.
Don't some USB hosts have an optional higher voltage line, but not all do? Maybe WM5 requires the higher voltage, but WM6 works on either?
I don't really know what I'm talking about (yet) but I know I did see my Treo750 charge on USB on WM5 in some cases.

Tried this for myself. WM5 ATT Treo 750. Plugged it in to USB with a 75% charge. Phone off and active sync turned off. 100% charged in the morning although there were no indicators that it was charging.
Windows XP (SP2) desktop computer. USB 2.0

If it's like every other HTC device made in the last 10 years, there's no reason it shouldn't charge via USB, albeit slowly

Battery Draining on USB? Read here...

i was complaining about battery draining when my prophet is connected to USB (although it shows charging).. then i upgraded to IPL 2.20 as in this thread http://forum.xda-developers.com/showthread.php?t=315016
the upgrade doesn't change the ROM, only upgrades the IPL/SPL to 2.20
after rebooting, i noticed it started to actually charge the battery on the USB connection. i rarely carry the power charger, but always carry my laptop and USB cable so that's big deal for me
turned out during my initial upgrade to different ROM's, PDAV, Gullum V3 then V5, I never actually did the process of upgrading the IPL/SPL
thought this may help. if others complaining of same issue can try and confirm?
(BTW, upgrade only works on XP... or at least for me)
cheers
|P|

I can confirm this. Had the same problems with no charging via USB. Only the original power charger was working.
Just upgraded to ipl/spl 2.20 and its charing again while connected to my pc
Will also test with the usb charger in my car, which also made problems after upgrading to WM6.

i have the same problem. When i try to charge my phone ( usb/ or power) it doesn't work. But if i reset the phone after connecting the cable, it starts recharging.

Tornado won't boot

Booted up my tornado (hadn't done so for a while) and it came up fine. Battery level was still good and then I ran a clear storage. It shut itself down and would never come back up again. Charging doesn't seem to work as I no longer get a light - left it like this for a few hours. Is this a battery problem or is the main board dead ? Anyone come across this ?

Can access bootloader?

Nope - I have tried. Ordered a cheap new battery just in case

have the same proplem, new batterie helped
i've nitrogenious 1st wm6 release on it and since yesterday evening my tornado is bricked. no lights, no charging, no sound, no reponse at all. with a spare batterie it boots to bootloader - I think I will load SP1 from nitrogenious.
to give it a try i've loaded the old wm6 again and it works very well. good to have a backup from yesterday! so i have to buy a new battery - in ebay us for 1$ in ebay germany 13€, well ...
hope this helps.

are u trying to charge through USB or AC adapter?
i ve had an issue once where my battery died after normal daily usage and when i hooked it back up to USB, it wouldnt charge at all. no light etc.
i had to hook it up to wall socket socket AC adapter. that did the trick.

i just tried the usb - haven't tested with the adapter.

Battery charging problem

Hy ewerybody,
i have some charging problem, i fashed a new rom and i cant charge my uni with my travelcharger...prevously it worked with my motorla v3 charger to, but at the moument dont.
i can just charge on usb cabel during active sync, and with my old htc prophet charger....
what heappens, anyone can help me please?

The kind of problem you're describing doesn't seem related to your new Rom, the cables have the same pins (for charging purpouses) connected, chances are that you're travel charger have just gone to heaven just when you flashed your Uni, if you want to be sure (and you do have a multimeter) you can look out for the 5 volts at the mini USB end (be very careful with this procedure as pins are very close to each other), usually (i don't remember it quite well) the power pins are the opposite outer extremes, also the metallic guard is normally connected to ground.
Another thing to verify, is that the travel charger itself is in good working order.