MDA Compact dont work - JAM, MDA Compact, S100 Software Upgrading

Hello
At first sorry for the Title.
My MDA Compact have following Problem:
If i start the MDA i must prepare the Timezone an some other things.
Then he reboot and start a Update. He read Datas from the extended Rom and after that the light goes off and i can read at the top Serial(if usb is plugged in there is USB) and at the bottom V1.00.
I have vista X64
Can anybody help me to fix my Problem?
What can i do?
PS. Sorry if my english is bad, iam german

Hi!
My tips:
1.Make a hard reset.Power off phone.Press Voice recorder+Camera button and press reset.Release reset,but hold voice rec.+camera.You should see a black screen,I don't remember the text,press Send(Green phone).It will delete all datas from the phone(contacts,your files,etc..).After that phone reboots,you have to assign the touchscreen,date setting,etc...
2.If it doesn't help,you have to check the internal battery.It is under the ringer speaker.
3.ROM upgrade
BR
Scootie
P.S.:Viel glück! (transl.:Good luck!)

How can i upgrade with vista x64 ?

psprofi said:
How can i upgrade with vista x64 ?
Click to expand...
Click to collapse
Maybe you need some drivers,you can find it in the forum,but I recommend you to use a PC with XP.
BR
Scootie

Hello again.
How can i disable the Networt restriction?
I have a T Mobile MDA (PM10A) and want to use a Vodafone card.

Related

Removing T-Mobile Customisation(MDA Compact)

Hi!
I'm a newbie and I red a lot of stuff on this forum but I need help
Can you all tell me all the ways to remove T-mobile Customisation from my MDA Compact(I know about the Hard reset and Soft reset trick).:?:
Can you list all software, tools, links and other stuff that are needed for this procedure. I would be very very thankful because i have come to a dead end.
THNX once again and a hope you will help me and tell me exactly what to do!
Removing MDA customization
I am new here also but I ofund how to remove T-mobile costumization from my MDA.. First download next: MaUpgradeUt_noID.exe, MaUpgradeUt_noIDcrack.zip (I think that`s the name), WWE_11200_128_11210_ship.exe from ftp://xda:[email protected]/....
Then unpack in same folder MaUpgradeUt_noID.exe and eUt_noIDcrack.zip and overwrite if he asks. Then Try right mouse click and extract the WWE_11200_128_11210_ship.exe... Then go to bootloader mode (press camera button, power button and reset at same time) and start MaUpgradeUt_noID.exe... When it`s finished reset MDA and start WWE_11200_128_11210_ship.exe.. Then you should wait for about 20 minutes and thats`s it.. It worked with my MDA from Austria.
Offcourse You need to have Microsoft Active Sync to connect MDA to PC... I used ver 3.8.. Thats free on Microsoft web page...
MDA Copmact T-mobile
A mozes mi se javiti na mail [email protected] ako zapne pa mogu da pomognem....

ROM in XDA mini corrupted--HELP!!

i bought a XDA mini from ebay.when i received the device it is of german made and i am an indian.when i was trying to upgrade my ROM version,i got an error and failed to upgrade, since then it is not turning on .i tried to soft reset ,hard reset but it is fruitless.later i came to know that the software with which i tried to upgrade was for 'XDA ll'.how can i reinstall my original ROM now.moreover i noticed that something "USB v1.02" is being displayed when i connect it to the PC with USB cable and "SERIAL v1.02" when i disconnect it from the PC.
Can any one help me i have used my phone 1 month back.
Your device is now stuck in the bootloader & that's no problem. Just visit the wiki & go to the magician section. Explore it, especially the part about rom upgrading with exe method & download the 1.13WWE rom with the link on the magician main page (@ the wiki).
Then connect your magician (mini) to the usb & start the exe file (shipped-rom) you've downloaded. Now it should finish, if an error 120 comes up, use maupgradeut_noid.exe like described in the howto.
Your magician should be cured after this.
Regards, M
sir ,
i am new to these,I have been searching for the software of upgrade Would you please give me the exact link to download.
http://wiki.xda-developers.com/index.php?pagename=HTC_Magician
thank you sir ,It worked would you please tell mehow to close an apllication without using "Running programes" like media player etc
taskmanager
There are lots of taskmanagers to do this like spb pocket plus, mbutton... I'am using VJOkButt assigned to a hardwarekey by aeb button plus.
M

HELP on installing ROM

hi
I'm a newbie to PocketPC, I just bought an used PocketPC from my friend.
It's a T-mobile MDA Compact with O2 mini traditional chinese firmware. All the menu, everything is in chinese. The problem is...i can't really read chinese.
It maybe a dumb question! But i just wonder can any PPC experts here show me "Step by Step" how to flash it to an English ROM?
thanks everyone very very much!!
Cora. ^^
1. Download any Magician WWE ROM (latest is ver 1.13) and the file MaUpgradeUt_noID.exe from this board's ftp.
2. Extract the zip file and copy MaUpgradeUt_noID.exe to the same folder where you extracted the ROM.
3. Disable the USB connection in ActiveSync.
4. Put you MDA in bootloader mode (press power+camera+resest at the same time.
4. Plug in your MDA to the USB cable.
5. Double click on the file MaUpgradeUt_noID.
I have followed the steps... After run the "MaUpgradeUt_noID.exe", and click "NEXT"... then.. It says "Checking the information on your device... Please wait... " i have waited over 10mins, but still nothing happened. Wonder is there anything i have done wrong?? thx
Cora.
FINALLY... it's working!!
THX THX everyone!!
CORA.
What shall I do if on stage 2 it always stops on 24%....and nothing happens?

problem with WM5 and function phone

hie .. im french sorry for my basic english.
i have bought on ebay a xda 2 and i received xda with wm5
but the presedent user doesnt use the phone its only to use GPS .
now i cant see contacts calendar use phone.
have you an idea ?
i thinks the best is downgrade to WM3 but i have only usb cable and no alim .. and with HimaUpgradeUt i have error 101 .
great thanks for help ( pleas answer in basic english )
probably....
olivmouth said:
hie .. im french sorry for my basic english.
i have bought on ebay a xda 2 and i received xda with wm5
but the presedent user doesnt use the phone its only to use GPS .
now i cant see contacts calendar use phone.
have you an idea ?
i thinks the best is downgrade to WM3 but i have only usb cable and no alim .. and with HimaUpgradeUt i have error 101 .
great thanks for help ( pleas answer in basic english )
Click to expand...
Click to collapse
...the blind leading the blind, but
Error 101 is communication error, so
1. Disconnect PC from internet
2. Disable any firewall, XP firewall, zonealarms etc
3. Hard Reset XDA << probably not needed but hey why not
4. Put XDA into bootloader mode Power Button + D-Pad + Reset Hole
5. Connect XDA to PC with USB
??? does bootloader change from serial to USB ???
6. Run HimaUpgradeUt.exe with correct ROM in same folder
7. Wait for 30 mins
8. Hey Presto

upgrade auch unter vista moeglich?

SORRY: wrong titel!! translation: upgrade to WM6 using Windows VISTA!!
Hi!
i am a newbe but i informed me since 1 week and so i want to give WM6 a chance.
i am trying to upgrade my qtek s200(HTC prophet) G4 to WM6 smartv1.3.
first of all i am using the following helps:
http://forum.xda-developers.com/showthread.php?t=308755
i try do us:
RUU_Prophet_220734_2207114_024721_NVID
to upgrade my mda. but i get always the same error:
ERROR [248~260] : UPDATE ERROR
by using the readme.txt i can only find the following info: pls restart mda and pc. i did both but i still get this error
i guess its because i use vista and i jump over the step : install active sync 4.5 (this is not possible in vista)
has any one an idea or has someone experience upgrading his htc prophet from WM5 to WM6 on WINDOWS VISTA?
thanks for help!!
flo
P.S.: i tried di kill all process including deactivating firewall and viren scanner. i also tried to close the securite center (is not possible)
nothing helped!
P.P.S.: i searched in google and i found out, that some people have successfully upgraded their mda on vista(but it was an other device)
P.P.P.S.: i also found an RUU on http://205er.de/ppc.htm but he confused me. he uses also a s200 device BUT the RUU is not for s200 (i am guessing, because their is another picture at the upgrade routine )
please yous forums search ... you can found a lot of hits her!!
**** sorry netrunner
if possible delete this thread please!
for everyone who has the same problem..
try this:
http://www.modaco.com/index.php?showtopic=252977
but i noticed, that it doesn't work for everyone!
if this happens also to you
FORMAT C: DELETE this **** vista... nothing works anymore on this OS except the graphical stuff

Categories

Resources