Related
Any advice? I am new to this whole thing. Have done some overclocking and what not on my PC, but this is a whole different game.
What types of things can I do without risking really f'ing things up?
What I hope is the simplest things I was hoping to do was to make my TILT screen look like the HTC Touch.
I thought about downloading Dutty's tweaks, but I am thinking I might be out of my depth starting out.
I would like to learn some things, but don't want to annoy the veterans that are here. Any direction would be appreciated.
Thank you.
What you could do is read, all the post people have put to do exactly what your asking. All the info is there you just need to search and read or use the wiki.
Have fun
-McMex
Thank you.
Download and run HardSPL on your phone from:
http://forum.xda-developers.com/showthread.php?t=334679
Then choose a dutty rom to install, since you are on a tilt try:
http://forum.xda-developers.com/showthread.php?t=345385&highlight=dutty+tilt
This is all you have to do to have a fully functional htc looking rom with the touchflo cube with the newest drivers and radio for AT&T. I am using this one on mine right now. This rom has everything that you will probably need already installed. Anything else will just be for personal preferences. This rom has an advanced config program which is great but also download kaisertweak for some nice settings.
Thanks for keeping it simple for the newb. I read a couple of things about the "radio" portion being an issue. What does the "radio" tweak mean and will a HARD RESET fix problems if I decide to revert back?
decimusmaximus7 said:
Download and run HardSPL on your phone from:
http://forum.xda-developers.com/showthread.php?t=334679
Then choose a dutty rom to install, since you are on a tilt try:
http://forum.xda-developers.com/showthread.php?t=345385&highlight=dutty+tilt
This is all you have to do to have a fully functional htc looking rom with the touchflo cube with the newest drivers and radio for AT&T. I am using this one on mine right now. This rom has everything that you will probably need already installed. Anything else will just be for personal preferences. This rom has an advanced config program which is great but also download kaisertweak for some nice settings.
Click to expand...
Click to collapse
The radio that comes with this rom will be the one you need. A hard reset only reinstalls the rom you currently have on the phone so to revert back you will have to choose another rom and install it. As long as the rom you install is an AT&T one or one made for the tilt then you won't have to do anything with the radio. If you change and use an HTC ship rom or one of dutty's other roms then you will have to download another radio and install it. Radios self install the same way as roms do.
This is the wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
On this page is the link to the ftp area where you could download the older radio if you decided to go to a non tilt rom.
Did you have any keyboard problems when doing the HARDSPL and installing the dutty rom. Also, which of the dutty roms did you install? Beta 2?
I am still on the Beta 1 and have been too lazy to changeover yet as Beta 1 is solid.
If you really want a good "How To" check out Mr. Van X:
http://www.mrvanx.org/cms/index.php...ask=view&id=65&Itemid=26&limit=1&limitstart=0
Every place he says "Hermes" you just think "Kaiser" or "Tilt". All the steps are the same. It is a great walk-through. He has you download the .net framework first. I know I didn't have it. Then he steps you through hardSPL and finally the ROM.
A few weeks ago I followed this exactly and have never had any troubles. Why a walk-through like this is not in the Wiki for the Kaiser/Tilt I have no idea. It'd be a lot more helpful to newbs (like myself) than the forum fav response, "Read Dammit".
Augster said:
It'd be a lot more helpful to newbs (like myself) than the forum fav response, "Read Dammit".
Click to expand...
Click to collapse
Why don't you write an entry for the wiki? That's how the Wiki is updated and maintained, by contributions by everyone.
afavre said:
Any advice? I am new to this whole thing. Have done some overclocking and what not on my PC, but this is a whole different game.
What types of things can I do without risking really f'ing things up?
What I hope is the simplest things I was hoping to do was to make my TILT screen look like the HTC Touch.
I thought about downloading Dutty's tweaks, but I am thinking I might be out of my depth starting out.
I would like to learn some things, but don't want to annoy the veterans that are here. Any direction would be appreciated.
Thank you.
Click to expand...
Click to collapse
I just used HardSPL and Dutty's Hybrid Rom No 5. I'm not sure what the difference is from his Tilt Beta version but I tried both and decided to go with the Hybrid. Point is, until last night I did not know what a Rom was. I read the forum and followed the directions. Here are links to what I used.
HardSPL (you need to do this first). Everything you need to know is in the first post
http://forum.xda-developers.com/showthread.php?t=334679
Then find a ROM. I downloaded several including the stock ATT rom just in case I decided to go back. The steps for loading a ROM are almost the same as HardSPL, just follow the directions on the screen.
This is a link to Dutty's Tilt Beta ROM (all you need is the link to the ROM at the bottom of the first post). If you want to try Dutty's Hybrid ROM, scroll to the 3rd post made by username "alltheway" and click on the red Hybrid No 5 Rom link in his signature block.
http://forum.xda-developers.com/showthread.php?t=345385
It is very simple to do.
Do I need to SIM Unlock?
I have been reading through the posts, and I can't find if I must SIM lock my phone before trying to install Dutty's ROM. On my 8125 the general concensus was unlock both. I don't have any need to run other radio's on my phone, and I won't be traveling out of the US.
Also I am currently running SPB Pocket Plus 4.01. Should I do a hard reset before trying to CID unlock and load of new rom?
ShinySideUpAZ said:
I have been reading through the posts, and I can't find if I must SIM lock my phone before trying to install Dutty's ROM. On my 8125 the general concensus was unlock both. I don't have any need to run other radio's on my phone, and I won't be traveling out of the US.
Also I am currently running SPB Pocket Plus 4.01. Should I do a hard reset before trying to CID unlock and load of new rom?
Click to expand...
Click to collapse
No you do not
hey Guyz. I have a Tilt that a customer gave me that got bricked while trying to flash one of dutty's roms...Problem is that the genius didn't load up Hard SPL even tho he told me that he did...now He wants me to fix it...even tho he didn't follow my instructions and read the WiKi...I kno that on the Hermes it was able to be unbricked. Is the same for the Kaiser possible? I would greatly appreciate your help as my customers are loving the work you guyz do here in nyc..
Thanks in Advance!
Cristian
What is the current status of the phone?
Can you get into the bootloader at all?
If you can get to the bootloader you should be able to load the AT&T AKU v0.4.4 ROM (the unoffical upgraded AT&T ROM). Once you get that loaded you should flash HardSPL immediately.
Let me know how it goes...
Cheers.
I bricked my tilt when it was less than 24 hours old... I recovered it with a BETA of the ATT rom and THEN redoing the hardspl thingy - worked a treat.
Do a search for tolt bricked and you should find afew threads for it.
The rom is called something like RUU_Kaiser_ATT_WWE....._Internal.exe
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
BTW: The AT&T ROM for the Tilt is actually quite good in the big picture of things. At least the phone is usable (slower than it should be and less memory than it should have, but its still very usable and stable on the official rom). If you want to ***** about official roms, go back to the 8125 and its official rom. The while the device (at the time) was great, that rom made the phone almost worthless (super slow, battery problems, bad radio, dropped calls, freezing, etc). I can't tell you how many people that run custom roms on the Wizard just can't believe what that phone is actually capable of.
Ok, sorry, got off topic there...
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
mfrazzz said:
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
Click to expand...
Click to collapse
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Quick Silver said:
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
Click to expand...
Click to collapse
Only once! Than you can flash as much as you like!
HTCFAN0923 said:
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Click to expand...
Click to collapse
ActiveSync will not recognize your device when in BootLoader mode!
The Vendor ID error means the ROM cannot be loaded on the Tilt without HardSPL. You need an original Tilt ROM. (That's what I think about this)
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
as far as ur suggestions...It looks like I'm gonna be drunk @ 4am on XDA tonite...lol...
HTCFAN0923 said:
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
Click to expand...
Click to collapse
That's cool... my misunderstanding then. Hopefully no hard feelings .
All in all it sounds like the guy wants a custom ROM so you should probably get the ATT Beta ROM and install that. And then install HardSPL.
Check Kyphur's second post in the thread below for the ROM you want.
http://forum.xda-developers.com/showthread.php?t=343198
Thanks for the info sycho...I'll get to it after work..
Good news! The AKU 0.33 worked! Thanks for ur help sycho!
how can i re-install the window? at tilt 8925
i have wm6.1
i want to reset it so the error message shud gone like Recover ?
@kaal,
It seems what you want to do is a HARD RESET. Please visit Kaiser Wiki and read through. You'll know your phone better that way.
@HTCFan & Sirsycho, Glad you both sort it out in the community spirit Cheers!
sirsycho said:
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Click to expand...
Click to collapse
Because of you folks and this thread, I have a working device as opposed to a paperweight...Thanks!!!
The screen remains black, blank, and does not light up, even though activesync knows the device has booted because the icon becomes green. I can't navigate any controls, though the keys do light up when I slide it, or press buttons. Screen remains blank/black.
Here is what I did to get to this state:
1) I first hard reset my Kaiser, to reset all user preferences. This I accouplished by pressing both soft keys while pressing power (if I recall correctly), then hitting the green call button. It then installed Windows Mobile fresh.
2) I then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
3) I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way.
What should I do? Did I miss something? Is this recoverable?
It also does not have any sound. Does this mean I can't unlock?
How do I flash back to the original rom?
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
NetTechie said:
Ok, looks like have version 1.27.12.11 rom, during boot.... according to this page it isn't ok for my AT&T Tilt device.
http://forum.xda-developers.com/showthread.php?t=393182
So does this mean I have to pay to unlock? Or is there some way to do it still? Thanks.
Click to expand...
Click to collapse
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
I have a problem... it wont go green now, I can't get activesync to go green. I wont be able to load the rom... what can I do?
[ EDIT ]
A reboot fixed this *sigh of releif*. Goes green now.
AllTheWay said:
Try flashing this radio.
http://www.4shared.com/file/36681926/36b4832d/KAIS_Radio_Only_1271211_CustomRUU.html
I guess you didn't read step 10
Click to expand...
Click to collapse
Ok, question: Will I use the file in Step 3 to put that on the phone? It is saying there is a file open...? I can't disable USB on the device, as the screen is blank.
[EDIT] Looks like everything I needed was in the download. I put the other ROM back on. However, I'm having a problem with activesync... When I click on Connection Settings active sync freezes up. Any ideas what to do to fix ActiveSync so I can turn off USB, without crashing ActiveSync?
Okay, I got the screen with the unlock code... only it gave me this readout:
Your Unlockcode = ........
just like that, with dots.
Is there any way to unlock a phone, if the screen goes black? I can go back to the old firmware, but this special firmware is needed I think to do the unlock, and this special firmware makes the screen go black on my model.
EDIT: On page 33 of the Kaiser unlocker topic, I found what looks like my answer. I need the AT&T 1.57 ROM, as it is compatible with this patched radio so the display will work. Unfortunately, I haven't been able to find it on this forum yet. EDIT 2: Found it, loading it on now: http://www.4shared.com/file/3857459...ULAR_WWE_157_-_Originaly_Shipped_ATT_ROM.html
Unlock worked, once I had the AT&T 1.57 version of the ROM on there. ActiveSync still freezes, but I uninstalled it for the section where I was supposed to disable USB. Installed the 1.27.12.11 radio after completing the unlock, replacing the patched radio. All finished.
Mine still showsup Blank screen
Hi,
I followed the same steps as yours :
Firstly I reset my Kaiser & then followed the HardSPL instructions, here:
http://forum.xda-developers.com/showthread.php?t=361236
Everything went fine.
I then followed the Kaiser Sim Unlocker instructions here:
http://forum.xda-developers.com/showthread.php?t=361039
After completing step 5, the device rebooted, the AT&T icon displayed, then the screen goes blank and stays that way
Now I tried flashing
http://www.4shared.com/file/36681926...CustomRUU.html
But it didnot help (
Can you please tell me what I should be doing next..
vrramakanth said:
But it didnot help (
Can you please tell me what I should be doing next..
Click to expand...
Click to collapse
what do you mean when you say it "didn't help"?
I still get the blank screen..I am now downloading the AT&T 1.57 version .. I am hoping if I install this I will get the display and I can proceed to step 8a, 8b,..
Sorry to be short,
But did you even bother reading through the other threads with the exact same problem as you?
the problem you have is that you flashed an incompatible radio with the ROM that you are runing on the phone. You need to reflash the ROM with a rom that is compatible with the radio or reflash the radio rom to what came with the phone rom that you are running.
You should have upgraded to a 6.1 cooked rom prior to doing the SIM/CID unlock.
Flash your phone with a cooked 6.1 rom that INCLUDES the radio, and then try the CID/SIM unlocker.
my two bit.
I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html, which is the ROM that comes with this phone. Do u think this helps? Do u want me to flash 6.1 ROM instead of this?
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
vrramakanth said:
ok..am a BIG novice here..may be a bad question..I have Windows 6.0 on the mobile..so the Cooked 6.1 ROM L26 that I found http://forum.ppcgeeks.com/showthread.php?t=26925 fits into this? Do I need to upgrade to 6.1 before this? sorry if its a wrong question ..
Click to expand...
Click to collapse
It's not a wrong question
1. Yes, that fits in
2. No, you do not need to upgrade to 6.1 before this, flashing the ROM will take care of it
hope this helps
Thanks mbarvian!!
So I am Installing the upgrade to 6.1 ROM, but do I still need to install the correct AT&T ROM that you gave me in the other thread http://forum.xda-developers.com/showthread.php?p=2452022#post2452022?
Thanks!!
Alibaba0101 said:
No,
Unless you know the stock ROM comes with a compatible radio, it will not work. The problem you are having is because you loaded a radio that is not compatible with the stock rom.
If you already have hardspl loaded, then load a cooked 6.1 ROM that includes a compatible radio (for example L26 v9 rom or Sleuth 3.0 rom).
Click to expand...
Click to collapse
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Note for WM6.1 users
================
Do not try this on 6.1! You will need to downgrade to 6.0
Click to expand...
Click to collapse
vrramakanth said:
I now installed a 6.1 ROM..now do I need to downgrade to be able to do SIM unlock?
From http://forum.xda-developers.com/showthread.php?t=361039 it says :
Click to expand...
Click to collapse
Yes, now you would want to download and flash the ROM I gave you in the other thread
here's the link:
http://rapidshare.com/files/55298724/RUU_Kaiser_CINGULAR_WWE_.exe
I am trying with http://www.4shared.com/file/38574592...d_ATT_ROM.html is this fine??
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
flipside123 said:
I have been searching all over for this but it's probaly right in front of my face. I read that you need to get rid of SPL.nbh from official ROMS before flashing back with HardSPL. The problem is, the official T-Mobile Wing ROM that I downloaded is an .exe file. How do I go about removing the SPL.nbh file since it doesn't display folder contents or anything, just runs the RUU?
Sorry for the double post, I realized I was in the wrong forum
Click to expand...
Click to collapse
I'm uploading a zip file which will have the entire thing already to go.
Just flash your device as you would with any other rom.
Hang tight the link will be available within 10 mins.
Thank you sir. Greatly appreciated
flipside123 said:
Thank you sir. Greatly appreciated
Click to expand...
Click to collapse
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
flipside123 said:
One more question. I'm looking to keep HardSPL but I have to revert to original to upgrade ROMS don't I? I want to upgrade to your OT 6.5 ROM
Click to expand...
Click to collapse
Okay,
I thought you wanted to go back to the original T-Mobile rom.
If your trying to HARD-SPL your device to install one of my roms or another cooks roms then thats another story.
Please read my FAQ or one of the stickies.
Ok, I think I got it now. So I don't need to revert to the original ROM to flash it since I have HardSPL? Thanks for the help
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
I tried the file that you uploaded here...And it went thru the whole process of flashing the ROM, but after it updated my wing just stays on the T-Mobiel screen and never boots past that.
It had that open touch software on it and I don't want open touch. I want plan old WM 6.0 on there.
I called T-Mobile and got an offical 6.0 update from them, but when I try that one it gets to 1% then says it has a disconneted and I get a connection error.
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
So does this work? The two people who did this had problems. I need the phone to be all stock so I can have t-mobile send a free replacement because the screen is going on this wing.
***EDIT:*** Oka so this is the same as http://forum.xda-developers.com/showthread.php?t=364543&page=2 the first time I tried it it froze at 15% on step 2 so I installed the RAPI CAB like it says. Step two completed, phone rebooted and had white screen then I got error 260 I think. I have the stock t-mobile rom on it and had it on before I did this but it still has the yang from when I did a hard spl. Is there another way to get it to stock or am I doing something wrong? Plug in phone, let it sync, run herald-uspl.exe hit enter and so forth.
***EDIT*** Ok so this time it completed but is now stuck at the T-Mobile screen and I am now unable to even flash because I can't get past it And that damn yang still shows up in bootloader. Well went into bootloader and flashed from there so phone works but the damn yang is still there. And on a side note: Has anyone ever had a problem with their screen going very dark after flashing a rom from here? Phone was fine then I flashed OTP v7.4 TouchFlo 2D Lite.nbh yesterday and at night screen started going dark, would light up when opened in keyboard mode, then switched and then both were very dark and hard to see. I then flashed to OTP v7.3.1 TouchFlo 2D Final.nbh and still dark. Then I flashed to stock rom and have been able to see the screen since.
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
smokeingit said:
This is stupid easy to do... im shocked there isnt a post going into detail.
5 steps to going back.
http://forum.xda-developers.com/showpost.php?p=2998657&postcount=4
Click to expand...
Click to collapse
Did not work. Do I need to install the cab files again? I know I deleted a file out of the stock rom so it would not overwrite or verify or something but I put that file back, should I not have? This has been a few weeks and still can't get the yang off. Screen on my girls phone is almost dead, she can't even slide it any more so I need to fix the spl so I can send back to t-mobile....anyone ?
this is what i do to get back to the tmobile orginal. download the software from tmobile. I downloaded the newest update from tmobile site. REMOVE YOUR SD CARD. Connected my phone via usb. Launched the update. It has never failed me yet. It is just like updating your phone. tmobile has to take it, it is their update. They sent me a new phone noproblem, matter of fact i have to do it again, the back on the phone keeps getting loose on me. so they are sending me another phone again. hope this helps.
Alternatively you can use the combination of uspl and stock rom ruu to return your device to stock tmobile rom...
1. Enter in to uspl like you were falshing one of ttran001 roms... You can get this HERALD-USPL-beta3 from http://rapidshare.com/files/79249048/Flash_Center.rar
2. ONLY use steps 1 and 2 from the black screen (getting the white screen on your device)...
3. For step 3 in the flasher exit out of the black screen (windows cmd screen) by pressing ctrl+C...
4. Fire up the official ruu from tmobile found here http://forum.xda-developers.com/showthread.php?t=358030 or alternatively if you have a tmobile account still active you can get the most up to date rom from http://www.t-mobile.com/wmupgrade/
5. Fallow on screen instructions...
6. Back to stock rom...
Brick dopod C858
ttran001 said:
Done:
Remove HARD-SPL On The Wing
This is the same tool used to flash your device when it was not HARD-SPL.
I replaced the RUU_Signed file and SPL.nh file already.
It will bring your wing back to the stanard rom as when you first got it.
Click to expand...
Click to collapse
Hello freind,
I have been downloaded the above "Remove_HARD-SPL_On_The_Wing.rar" files and flash it to my Dopod C858 which has the Chiness language, I suppose to change the language from chinesse to Englis, After flashing the above files, now the phone is only in bootloader mode.
If you start the phone it will stuck on white screen and turn off.
Please help me how to revive my phone back.
Thanks and best regards
Jhemzz
Hey I'm having the same problem as most of these guys who tried the file. The phone just idles on the white Tmobile screen... does anyone know what to do or how to help?
Please and thank you!
angest90 said:
wen i did this i think i bricked my fone now its at the tmobile screen and it jus staying there
Click to expand...
Click to collapse
im having the same problem can anyone help me please?
hotsammysliz said:
im having the same problem can anyone help me please?
Click to expand...
Click to collapse
Being stuck at the Tmobile screen isn't a true brick. Just reflash your ROM. (If you're not HardSPL'd, reflash your RUU.)
Remove Hard SPL from bootloader
Hi,
Anyone out there knows if we can remove hardspl from bootloader of Wing. Problem is my mobile displays splash screen, then switch offs by itself. Its been quite some time that I have hardspled it and have been using it. But recently I am facing this issue, so I am trying to move to original RUU and try if it works.
So for that anyone knows if we can remove hardspl from bootloader, because I am only able to enter bootloader. Moreover I tried several original roms from Flash Center as well as through SD card as well, but still be SPL version is 4.70.yang. Anyone knows any other alternative.
Also, if anyone has faced similar problem then kindly advice how you resolved.
Thanks in advance!
Regards,
Pankaj
Ok...so my tp2 is verizon and I did the whole hardspl thing and somehow got the energyrom leo on my fone, and then wen i tried to update to the new sense 2.1 extreme rom, i dont know wat happened. It said to use this custom ruu thing which i clicked on, and wen it updated my fone, my fone does absolutely nothing now cept loading the start screen where it says Touch pro2
I new something was wrong becus at no point was the .nbh that i extracted used, but no ruu came with the file that i downloaded...sighhh so is my fone dead or wat? I tried hard resetting, and although i am able to get to the hard reset page, wen i actually do it, it still just freezes where touch pro2 screen comes out
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
starscalling said:
dont trip
i've 'bricked' most of my phones i've played with at least once. If your getting anything your ok - go to boot loader mode, reflash the original rom on it, then the one you want. Make sure your battery has a good charge also ^^
Click to expand...
Click to collapse
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
fjgotgame24 said:
ok so im uploading this rom rite now http://forum.ppcgeeks.com/showthread.php?t=91940..the verizon one, once i get that do i have to do the hardspl thing again? btw thanks so much for the bootloader thing, i didnt know how to do it, i kept doing the hard reset..lol
* i got the stock rom back, thanks alot...do i need to hardpl it again? could sum1 help me flash to the another rom as well, i just dont know wat to do wit the nbh
Click to expand...
Click to collapse
it wouldnt hurt. Just pretend youve never done anything to the phone.
Write or type out a list of steps for each phase
print it out and cross them off one by one.
thanks
Thanks my TP2 now is working
orobas said:
Thanks my TP2 now is working
Click to expand...
Click to collapse
sweet
just had the black screen of death - lol was like - THE THREAD OF DEATH CURSED ME :> [all good now of course]
Failed flashing with CustomRUU.exe
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
scottGx said:
Every flash has failed (freezes at "Touch Pro2" boot screen) when I tried to use a ROM that uses CustomRUU.exe (Miri, Cell_Pro, Athine, AF, Shadowline, and others). Flashing ROMs that use ROMUpdateUtility.exe already extracted flash fine. I've even tried first flash the original Sprint stock ROM and then flashing a "CustomRUU" ROM but without success. I've also extracted the files from the CustomRUU.exe and then run it with the nbh file but that doesn't work either. HTC Touch Pro2 (Sprint)
Any suggestions?
-Scott
Click to expand...
Click to collapse
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
DaveTheTytnIIGuy said:
You're flashing CDMA ROMs, right? Not the GSM only ones found here, but CDMA ones from elsewhere, like here? Try flashing one of the CDMA ROMs found at the second link, and see if that works, because I think you may be flashing GSM ROMs onto your CDMA device, which would explain why it flashes, but doesn't boot properly. Hope that helps
Click to expand...
Click to collapse
Apparently, I was flashing a GSM ROM. There really should be better indication of what the ROM is designed for than simply being in a particular form. It wouldn't be any trouble to add a few characters (GSM/CDMA) to the file name to make it clear.
Thanks!
My Verizon tp2 is stuck on the TOUCH pro2 screen when it tries to boot.. It will not hard or soft reset. So it's not being recognized by my pc to do the hardspl thing. I was trying to flash the perfectblack rom but it said it was not for my device...so i tried Energy rom.. it flashed but will not boot.. please help...how do i fix this.
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
dwizzy130 said:
Wait, you are sending Verizon your phone with a non-booting cooked ROM and the HSPL on it?!?
If they figure that out, there's a good chance you'll be SOL.
dwizzy130
Click to expand...
Click to collapse
Exactly. Even if you have insurance on the TP2, if you sent it back with anything that is not stock, your insurance is probably voided, they probably wont give you your phone back, and you might even have to pay full price for a new one. Good luck man. Definitely should have held out for some responses before you sent it out. If you haven't then that's good, but if you did, your probably out of luck.
defiantone said:
Well...I took it back to Verizon...they are sending me another one. Have to figure out what I did wrong because I truly wanted to try a cooked rom or two.
Back to the drawing board.
Click to expand...
Click to collapse
Why didn't you try what the orginal poster did?
I loaded a GSM rom on my Sprint TP2, I wasn't paying attention to the orginal
Post and just thought oh.. I want this rom..
What I did,
Turn on the device while holding down the Power button and the Volume Down key. If you see Serial and 3-4 colored bars plug in your USB, and reflash with a CDMA Rom.
This fixed my Phone. Credits to the gurus at PPC Geeks. if i find the topic later I'll post it.
*edit: nevermind
*edit: problem resolved