Database Info

Killed my 8125

Well I guess I bricked mine ulness someone knows something I don't. I was doing a flash, running nothing else and XP did a memory dump and blue screen of death while 8125 was 54% done. Guess I have a paperweight now.

I am sure I'll get flamed for my post but thank God the Cingular ROM doesn't need an actual Active Sync connection. As long as you are in RBG bootloader screen and the USB comes on when you plug into the PPC, the factory ROM can repair the unit.

Possible Reviving Techniques For (appeared to be) bricked Wizard
See the following link and read, read, read.
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard

Very good I do remember reading that post from when I first joined here, guess I just panicked. I must mention however that none of the WM6 ROMS i have would flash only the stock one would.

When you have a bad flash you ALWAYS should go back to an official rom. This will guarentee that you get back to a complete IPL/SPL and Extended ROM. If a flash goes bad, any (and all of them) could be corrupted and flashing a custom rom won't help (since most all of the custom roms don't include any of those pieces).

n3rxs said:
Well I guess I bricked mine ulness someone knows something I don't. I was doing a flash, running nothing else and XP did a memory dump and blue screen of death while 8125 was 54% done. Guess I have a paperweight now.
Click to expand...
Click to collapse
Reboot your pc....
Your device should be in bootloader mode still
Connect and flash the same ROM....it should pick up right where it left off
If this doesn't work, flash your factory rom
As long as your device powers up....it's not bricked
The same thing happened to me once on my wife's laptop

Yeah this was on my company laptop. I was flashing Faria's RealThing for the 1 hundredth time.

Need WM6 Underground

Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan

CID locked!

enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
The dreaded 95% error... He's right. Your Wizard is still CID locked.
Follow this thread to get your device CID unlocked and then try flashing WM6 again.
http://forum.xda-developers.com/showthread.php?t=285435

enggabhinandan said:
Since morning i'm trying to find the link where i can download the WM6 undergroud version. Actually i tried installing WM6 Most beautiful, but i'm getting Update error [302] after 95% of installation. Mine is a G3 phone with IPL 2.26 and SPL 2.26
Thanks
Abhinandan
Click to expand...
Click to collapse
i remember the time, when people were able to search info BEFORE stupid moves...now, my dear users, we have dying moloch named internet.
gl.

everbody is lazy now
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.

tomred said:
when i first staring updating my wizard. I read for a few days because I wanted to make sure it was done right. People read one post and then try to flash there phone only to mess it up. I guess they have alot of money to buy more phones.
Click to expand...
Click to collapse
If only we were all so rich... When I first started, I downloaded a WM6 Rom I found on this forum but read nothing... Tried to flash it, phone went to bootloader immediately afterwards and would do nothing else. I called T-Mobile and they sent me to the place on T-Mobile.com where I could get the official Rom download and was able to restore my MDA to life again but not until I had read about 20 different threads, did I attempt it again.
Thats the problem with some people here. They don't read and just assume that because they're a Software Dev that they automatically know everything or think that because they're pretty computer savvy that they know what they're doing or think that because they had their device for a few months that they're automatically an expert... It's annoying to tell you the truth because the only real way to learn is through a lot of reading, or trial and error and thats how everyone here has to learn.

I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.

joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Exactly,very true cudn't have said much better than this,had sleepless nights,doubts,fears an what if this and what if that happened,read and reread the forums for weeks and posting question,only when as you say 'give it time to SINK IN so that it is fully understood' YUP! GOT IT !!! SMOOTHLY
Dharvey
Dan I'M BACK!! MY WIZARD IS FIXED THANKS TO SOME GOOD OLD FASHION SOLDERING SKILLS...
Hey buddy I'm so pleased you got it done,CONGRATS man

Why the hell do you want Underground????!!!!!!!!
It's old, unstable and has soooo many bugs that have all been resolved in recent ROMs. Have you just had the forum on pda view then jumped at the first WM6 ROM post from the early days?

I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.

enggabhinandan said:
I'm not interested with the Underground WM6 but when MB_WM6 did not work, i thought of trying that.
I have a question here, i tried installing MB_WM6 and it stopped at 95%, later i tried to install Faria's kitchen ROM and it was successful. I tried unlocking the CID with lokowiz03. Do u people still feel that my phone is still CID locked.
Click to expand...
Click to collapse
Download WST tool and run it,it'll give all the info about your phone to determine the present status of your phone,only than it can be confirmed if it's cid locked or unlocked.
btw,faria's kitchen is for cooking the custom rom according to your own needs,it contains the Base Rom,OEM,RUU... and tools to build a rom.Did you cook your own Rom and flashed ?

joemanb said:
I read this forum for a few MONTHS before I flashed my device, and I'm glad I did. Not only do you have to READ the information, but you also have give it time to SINK IN so that it is fully understood.
There are some people who automatically cry out for help without expending any effort (NOOBE needs help! give me a link, fix this, WAA WAA). And then there are the ones who make this a great forum, they READ READ and REREAD, TEST and RETEST and generally provide knowledge, information and assistance.
All of us are riding on the backs of the mostly unsung developers Like Faria, Bepe and all the others.
Click to expand...
Click to collapse
Well said my friend... This is is how it should be. I think there should be a rule that have to be a member for so many weeks before you can even post and access download links on the forum... This should give you time to read before you make a mistake and brick your phone...

Thanks....i will surely search for WST tool. If u could post the link of the WST tool that will be of great help.
Thanks
Abhinandan

Hey........i found the link and also downloaded it.......thanks for the info

i tried flashing buttons ROM twice. The IPL version and others except SPL got changed to older one....but SPL remained the same 2.21, should itry flashing the buttons ROM again and again till SPL get changed to 1.01

now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one

enggabhinandan said:
now i installed the Xda_MiniS_LaunchROM_v154102 also even then the SPL version 2.21 only, how shall i change that to older one
Click to expand...
Click to collapse
do a soft reset of your phone , tap with stylus the soft reset button on the phone.the phone will reboot,see if it changes the spl,otherwise flash button's rom 1.05 a couple of more times and then do the soft reset,hope it'll change

Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do

enggabhinandan said:
Sorry...for posting the same info in a new thread......one more question here how to do a soft reset...is it by using ur WST tool. By keeping the power button pressed it will ask that device will be turned off....is this soft reset...or is there any other way to do
Click to expand...
Click to collapse
To perform a soft reset,use the stylus to lightly press and hold the RESET button on the left side of your device,it's a small hole type just underneath Infrared port,you just can't miss it,ok

I simply tried unlocking CID from lokowiz even though my IPL/SPL was 1.05/2.21. I got the below results .....in the result it says CID unlocked, can any senior person have a look at the output say was CID really unlocked
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
Copying C:\lokiwiz02_173\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=16: 314962fa - 121b40d192a81203
Key idx: 16
olddata: 55e9ed9a9ab801da460f100469464259621e8365aeb43277cf2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3dee342037c9d3bd3
newsum=f6adec8d encsum=2ee6f10180a5c82d
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005

Flash - What Went Wrong?

I've always fancied flashing my Kaiser (V1615) with a new ROM, but was always nervous because I wasn't sure of the process and didn't want to risk bricking the phone as well as all the effort needed to get everything back on it I needed. Well, a few days ago my old Kaiser met the floor and an untimely end. So I decided to take the risk and put a new ROM on it and decided on the latest Dutty WM6.1 ROM.
I read all about flashing on here and made as much sense of it as I could. Thing is, I'm very technical in general, but not very familiar with Windows Mobile or flashing. I found there was lots to read, but it was all written with an assumed level of knowledge and understanding of terminology. As a result I found it quite hard to understand. I took the plunge anyway and started, but things didn't work out as expected and I didn't understand why.
I'm not trying to be critical of all the work a lot of people have put into the documentation that is available online, it's just that when I originally approached this with zero flashing experience I found it difficult and confusing to understand. What I really needed was a concise and basic introduction to flashing. I've now been through the process and after re-reading the documentation it makes a lot more sense.
I worked out you need to run something called HardSPL before you could flash a new ROM. I'm still not sure what HardSPL does apart from CID unlock the device, but what does CID unlock mean?
I ran HardSPL v1 and it started ok, but then I ended up with a white screen. At this point I already wished I hadn't started, but no going back now. Is it known why some phones white screen? Turns out it's a common problem, so followed the instructions to recover. All was well again, but still with the original ROM.
I thought I'd be brave and stuck with it and this time tried JumpSPL1.56-KAIS instead of HardSPL as recommended on one of the tutorials. This went better and I ended up with the Tri-Color screen. I plugged my USB cable in and USB showed on screen.
Next step I thought was to flash a ROM onto the device. I ran the Dutty updater on my PC and all started ok, but when the update got to 18% I received a communication error. I tried to recover using the updater, but the same thing happened. At this point the phone wouldn't boot, so I was more than a little worried and wishing I hadn't started!
Found something that described several options for recovering from this problem. I decided to try and flash the device back to the original ROM from Vodafone. When I eventually found that ROM I ran JumpSPL again, got to the Tri-Color screen and ran the updater. This time the update completed successfully and the phone rebooted and was all working again.
I decided to leave the device as it was and started customising it myself. I'd still love to put a cooked ROM on there, especially if it helps with performance, but after the experience above I'm not very confident.
Can anyone tell me where or what went wrong? I'm going to get my old Kaiser repaired and want to try again on that phone.

My flashing routene (not ideal but it works for me)
1) run the first part of the Kaiser SIM/CID Unlocker & Changer
2) after device reboots, hold camera button and restart to check SPL
3) Flash rom/radio of choice
4) Follow HardSPL v3.07, v3.28, v3.29 and v3.56 by JockyW 's second guide "If you have problems with the above process, try this:" and flash my 3.XX SPL of choice.
Sam

Wow, I need a cuppa now
I'll go through 1 at a time... (and Sam has answered some questions already)
-CID unlock means that when the phone is loading a new device into the ROM the Carrier ID check is removed, each Mobile phone carrier has a different CID in thier OS ROMs. Unlocked means you can flash a OS ROM from any carrier or a cooked OS ROM from this site.
-The Jump SPL should only be used for replacing the SPL. Do not flash anything other than SPL's when at the Jump SPL (or SSPL). OS and Radio ROMs should be flashed from either in Windows Or By Manually Entering the Bootloaders. More info on SPL's is here: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
-Have a look at flashing from SD Card to avoid communication problems, http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash
-The most clear instructions can be found here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Hope this helps.
Dave

Thanks for the advice, but this is what I normally encounter when I read something on here, which is advice which no doubt makes perfect sense to the author or others experienced in flashing, but usually raises more questions than it answers in my head.
For example;
1) run the first part of the Kaiser SIM/CID Unlocker & Changer
Click to expand...
Click to collapse
What do you mean by the "first part"? The thread you've linked to doesnt really explain what I'm downloading and doing.
2) after device reboots, hold camera button and restart to check SPL
Click to expand...
Click to collapse
Ok. I get this assuming you mean the device will reboot automatically and I restart it to check the SPL version that gets shown on the boot screen, but why do I need to do this?
3) Flash rom/radio of choice
Click to expand...
Click to collapse
So at this point I can simply plug my device into my PC and run the ROM updater I've downloaded. Working out what rom/radio version to download is a minefield in its own right.
4) Follow HardSPL v3.07, v3.28, v3.29 and v3.56 by JockyW 's second guide "If you have problems with the above process, try this:" and flash my 3.XX SPL of choice.
Click to expand...
Click to collapse
I thought HardSPL needed to be run before I flashed? Also, why the different versions? Which one do I choose?

BTW, not trying to moan about everything, just posting my experiences to find out where I went wrong, but also highlight some issues hopefully other flashing newbies can relate to and authors of tutorials can draw some useful feedback from.

Only one question, do I need to CID Unlock before using Jump and HardSpl or, the Hardspl does the Supercid ?
I'm not referring about SIM since I don't care, for now
With WM6.1 - Oficiall HTC ROM
Thanks

Thanks for that one dave, on reflection i kinda missed the whole point of the thread, and as for the majority of the stuff you posted i didnt undertand that to begin with.
Also, DaveTME, if you are wanting to flash a custom rom to youre kaiser. from my experiance and from the number of times ive seen this happen. i advise against asking for reccomendations(sp?) (not saying you will but its worth saying) try a few roms out and decide from there.
Also another thing to note. if you flash to WM6.1 remember to use a 3.xx spl otherwise you'll encounter a few problems with youre device.
Sam
What do you mean by the "first part"? The thread you've linked to doesnt really explain what I'm downloading and doing.
Click to expand...
Click to collapse
download the Kaiser unlocker and run the first stage of it, the program is in the linked thread.
Ok. I get this assuming you mean the device will reboot automatically and I restart it to check the SPL version that gets shown on the boot screen, but why do I need to do this?
Click to expand...
Click to collapse
No, after the device reboots, youre given youre Rom, Protocol and Radio. if you hold the camera button and reset you'll get youre SPL displayed, youre looking for 1.01 olinex to be shown
So at this point I can simply plug my device into my PC and run the ROM updater I've downloaded. Working out what rom/radio version to download is a minefield in its own right.
Click to expand...
Click to collapse
1) Yes, just run the RUU with youre chosen rom and thats it
2) its not a minefield, just make a decision on what rom you like and flash it. theres nothing to stop you flashing another one.
I thought HardSPL needed to be run before I flashed? Also, why the different versions? Which one do I choose?
Reply With Quote
Click to expand...
Click to collapse
The 1.01 SPL will allow you to flash a cutom rom. following that you need a 3.xx SPL as they are designed for windows mobile 6.1. as for yure decision. i use 3.29, yet other users have had better sucess with 3.56. Most rom chefs will say which SPL they reccomend anyway with their rom.

-CID unlock means that when the phone is loading a new device into the ROM the Carrier ID check is removed, each Mobile phone carrier has a different CID in thier OS ROMs. Unlocked means you can flash a OS ROM from any carrier or a cooked OS ROM from this site.
Click to expand...
Click to collapse
Great. Thanks for that. Makes perfect sense now
-The Jump SPL should only be used for replacing the SPL. Do not flash anything other than SPL's when at the Jump SPL (or SSPL). OS and Radio ROMs should be flashed from either in Windows Or By Manually Entering the Bootloaders. More info on SPL's is here: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
Click to expand...
Click to collapse
Ok. I think you mean that the SPL is a component on the device? What is the difference between HardSPL and JumpSPL?
-Have a look at flashing from SD Card to avoid communication problems, http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash
-The most clear instructions can be found here: http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Hope this helps.
Dave
Click to expand...
Click to collapse
Thanks, will have a read

DaveTME said:
Ok. I think you mean that the SPL is a component on the device? What is the difference between HardSPL and JumpSPL?
Click to expand...
Click to collapse
Read the "SPL Questions" Wiki Page, it is all there and fairly clear.
Ta
Dave

now what??

i use t mob usa and already have an unlock tilt with the at&t rom (i think) it boots up showing the at&t logo and has a lot of at&t files. i want to load a new rom and have seen the rom for noobies thread but was wonder if i needed to do steps 1 - 3 or can i just download and load the rom without losing my lock and turning my phone into a brick. my friend has a dutty screen. any suggestions on a nice rom?

bigguyhawaii said:
i use t mob usa and already have an unlock tilt with the at&t rom (i think) it boots up showing the at&t logo and has a lot of at&t files. i want to load a new rom and have seen the rom for noobies thread but was wonder if i needed to do steps 1 - 3 or can i just download and load the rom without losing my lock and turning my phone into a brick. my friend has a dutty screen. any suggestions on a nice rom?
Click to expand...
Click to collapse
If you are already using that phone with T-Mo, then security unlock, hard spl and flash away! The best thing to do here is read read read! And dont be suprised if they move your thread! You can PM me though if you have any more questions! I will help you if I can!

sorry, just so that i dont turn my phone into a brick but what you are saying is that i can just flash my rom without any other steps.
thanks for the quick response.

bigguyhawaii said:
sorry, just so that i dont turn my phone into a brick but what you are saying is that i can just flash my rom without any other steps.
thanks for the quick response.
Click to expand...
Click to collapse
As far as what you mean by " lose my lock" I am not sure, but, you will need to CID unlock and hard-spl for sure! Do you have the AT&T Windows Mobile 6 or 6.1? I canot stress how important it is to read everything you can and be as informed as possible before you flash! I dont want to sound like I dont want to help (thats why we are here) But If you are already SIM unlocked it would still be wise to follow all the steps just to make sure you are covering all your bases, after all we do love our phones alot (often brought up by my sometimes jealous girlfriend! LOL! Read and use this...
http://forum.xda-developers.com/showthread.php?t=375583
Then if you get white screen dont panic just reset and go here follow instructions then go back and do the first one....
http://forum.xda-developers.com/showthread.php?t=354061

dashmaster1000 said:
As far as what you mean by " lose my lock" I am not sure, but, you will need to CID unlock and hard-spl for sure! Do you have the AT&T Windows Mobile 6 or 6.1? I canot stress how important it is to read everything you can and be as informed as possible before you flash! I dont want to sound like I dont want to help (thats why we are here) But If you are already SIM unlocked it would still be wise to follow all the steps just to make sure you are covering all your bases, after all we do love our phones alot (often brought up by my sometimes jealous girlfriend! LOL!
Click to expand...
Click to collapse
i have att windows 6.0. its already unlocked and i'm using on tmobile. what is
Hard-SPL? is this a file i should see on my phone?

bigguyhawaii said:
i have att windows 6.0. its already unlocked and i'm using on tmobile. what is
Hard-SPL? is this a file i should see on my phone?
Click to expand...
Click to collapse
No SPL is the bootloader on your phone when you hard SPL it keeps you from bricking your phone and allows you to flash non oem ROMs! If you Follow and read the links I just posted for you, you will be fine! I also use T-Mobile on a Tilt and I followed the steps and read alot and everything worked out perfect! I had to do the whitescreen fix, so it does work! I hope that helps!
P.S. Follow the instructions step by step, they are very important! Time consuming but worth it!

thank you very much

Please re-read the Newbies threads if you need an explanation as to what HardSPL is and how to install it and then flash a ROM. If you merely SIM unlocked to get on to T-Mobile, you will still need to CID unlock, so as a precaution you should do EVERYTHING in the newbies guide. Also, instead of just asking what HardSPL is, try following the links provided.
The community tends to be much more helpful when you have done your research and taken initative before asking for a direct hand out. This thread is better than average, but I thought I'd give you the heads up before flames come in from others.
Do everything here, all of it: http://forum.xda-developers.com/showthread.php?t=433835
Also note, the steps saying to remove your SIM and SD cards are very important.

Travito said:
Please re-read the Newbies threads if you need an explanation as to what HardSPL is and how to install it and then flash a ROM. If you merely SIM unlocked to get on to T-Mobile, you will still need to CID unlock, so as a precaution you should do EVERYTHING in the newbies guide. Also, instead of just asking what HardSPL is, try following the links provided.
The community tends to be much more helpful when you have done your research and taken initative before asking for a direct hand out. This thread is better than average, but I thought I'd give you the heads up before flames come in from others.
Do everything here, all of it: http://forum.xda-developers.com/showthread.php?t=433835
Also note, the steps saying to remove your SIM and SD cards are very important.
Click to expand...
Click to collapse
thank u flashed it already.......sorry for the simple question re: hard spl.

HardSPL
Follow the tutorials. Get Hard SPL. Don't cut corners, you may brick your phone. Hard SPL will allow you to flash basically worry free.
It's great that your phone is unlocked, but that doesn't mean you can't brick it. I'd try to explain in greater detail, but the sticky posts at the top of this forum should be much better at it than I am.

Please post your questions in one of the threads already created. No need to create a new thread for random new questions.

How to get my TP flashing again

Hi everyone,
So I updated the stock SPL back to my phone while having a CDMA rom on my device. Looks not like a problem at all, but appearantly it is when your phone is not a CDMA rom After that the phone won't boot anymore.
Since then I am not able to update my device to ANY rom, not even the stock rom. The updater keeps giving me the famous 262 error and hangs at 0% of the update. XDA-user orfeo_b has messaged me a while ago that he had a task29 program for windows 7 to format my phone. But he didn't respond to my message. So my question is: is there anybody who has this program for my phone? and if not, is there any other possibility to empty/format my phone?

Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?

R^7Z said:
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
Click to expand...
Click to collapse
sorry, a second after saving I realised that my topic was a question so I posted the topic again accidentally.. I searched the whole forum for weeks but didn't find any solution. As I said, I accidentally flashed a CDMA rom to my GSM phone.

User benjamminzIS started the thread HERE
Perhaps give that a once or twice over and see if it works for you. Be sure to leave some feed back if it does!
Additionally, I must confess that I skimmed your post because you posted twice and didn't think anything of it after the fact. So I apologize if I came off slightly rude. Was not my intent!

There's a pretty good chance your phone is dead now. Flashing the stock spl after bricking your phone with a cdma rom is probably the worst thing you could have done. What were you thinking? With the stock spl, you can't flash task 29, or anything, for that matter. I guess you can try flashing hard spl, but you have to keep in mind that this 'stock spl' is not in fact the real stock spl (it's a patched stock spl that is capable of over-writing the hard spl). I'm not sure if it can be over-written with hard spl; I guess you'll find out. If you had read any of the posts on reverting to stock for warranty purposes, you would have seen that the absolute last step is flashing the 'stock spl', because once you do that, the device is locked.
Now, if you also flashed a cdma 'stock spl', then you can definitely throw the phone away.