Hi everyone,
So I updated the stock SPL back to my phone while having a CDMA rom on my device. Looks not like a problem at all, but appearantly it is when your phone is not a CDMA rom After that the phone won't boot anymore.
Since then I am not able to update my device to ANY rom, not even the stock rom. The updater keeps giving me the famous 262 error and hangs at 0% of the update. XDA-user orfeo_b has messaged me a while ago that he had a task29 program for windows 7 to format my phone. But he didn't respond to my message. So my question is: is there anybody who has this program for my phone? and if not, is there any other possibility to empty/format my phone?
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
R^7Z said:
Why did you create two threads in the same forum? (THREAD LINK)
You not want to post HERE, did you even bother to do any searching in HERE
You do know the FUZE is GSM, correct?
Click to expand...
Click to collapse
sorry, a second after saving I realised that my topic was a question so I posted the topic again accidentally.. I searched the whole forum for weeks but didn't find any solution. As I said, I accidentally flashed a CDMA rom to my GSM phone.
User benjamminzIS started the thread HERE
Perhaps give that a once or twice over and see if it works for you. Be sure to leave some feed back if it does!
Additionally, I must confess that I skimmed your post because you posted twice and didn't think anything of it after the fact. So I apologize if I came off slightly rude. Was not my intent!
There's a pretty good chance your phone is dead now. Flashing the stock spl after bricking your phone with a cdma rom is probably the worst thing you could have done. What were you thinking? With the stock spl, you can't flash task 29, or anything, for that matter. I guess you can try flashing hard spl, but you have to keep in mind that this 'stock spl' is not in fact the real stock spl (it's a patched stock spl that is capable of over-writing the hard spl). I'm not sure if it can be over-written with hard spl; I guess you'll find out. If you had read any of the posts on reverting to stock for warranty purposes, you would have seen that the absolute last step is flashing the 'stock spl', because once you do that, the device is locked.
Now, if you also flashed a cdma 'stock spl', then you can definitely throw the phone away.
Related
okay, i had made a post but was apparently oblivious to the best wm6 rom thread so it got moved in there. but as i expected thats a thread most dont even visit because its annoying. and im not worried about that i just had another question that i figured i would edit it out and ask here.
for my second rom ill be trying how exactly should i go about it, i have seen a few posts on how to flash and such but i just want to make sure i dont mess up something thats well known..
i remember seeing somewhere where to update to a new rom you need to first update back to an old official one, is this true or atleast reccomended? (i just get goosebumps when i update the rom thinking im definately going to brick it and dont want to have to do it more than i need to)
also, by going back to an official do we mean the Tmobile 2.26 one that i see in the how to flash page? (again just being careful and thorough)
last question ( i swear ) on the howto page it mentions the button and wizard love rom, my wizard is already running xm6r4 as it was completely unlocked, do i need to do that now? when i put xm6r4 on i just flashed right over my Tmobile 2.26 rom
thanks, and sorry if these are stupid questions I did search but apparenly didnt pick out the right keywords
mckooter said:
okay, i had made a post but was apparently oblivious to the best wm6 rom thread so it got moved in there. but as i expected thats a thread most dont even visit because its annoying. and im not worried about that i just had another question that i figured i would edit it out and ask here.
for my second rom ill be trying how exactly should i go about it, i have seen a few posts on how to flash and such but i just want to make sure i dont mess up something thats well known..
i remember seeing somewhere where to update to a new rom you need to first update back to an old official one, is this true or atleast reccomended? (i just get goosebumps when i update the rom thinking im definately going to brick it and dont want to have to do it more than i need to)
also, by going back to an official do we mean the Tmobile 2.26 one that i see in the how to flash page? (again just being careful and thorough)
last question ( i swear ) on the howto page it mentions the button and wizard love rom, my wizard is already running xm6r4 as it was completely unlocked, do i need to do that now? when i put xm6r4 on i just flashed right over my Tmobile 2.26 rom
thanks, and sorry if these are stupid questions I did search but apparenly didnt pick out the right keywords
Click to expand...
Click to collapse
you should always flash back to the tmo 2.26 rom b4 you try another one... personally i go to button -> tmo -> new rom... seems to work well, but i have no idea if that extra step is really needed (but good for peace of mind )
I flash back to cingular's 2.25 rom and then on to the new one. I guess I could use tmobile's 2.26 but 2.25 has treated me well.
You flash back to an oem carrier rom such as cingular's 2.25 and tmobile's 2.26 so you know you have a clean wizard. You also know your extended rom has been flashed as well and won't cause any battery drain issues or problems.
If you have upgraded your radio and ipl/spl, after flashing back to your carrier rom your radio, ipl/spl will have been changed back to oem as well. In my case that means my radio goes from 2.69 to 2.25 and my ipl/spl from 3.08 to 2.25. I think those numbers are right.
Jeff
hey Guyz. I have a Tilt that a customer gave me that got bricked while trying to flash one of dutty's roms...Problem is that the genius didn't load up Hard SPL even tho he told me that he did...now He wants me to fix it...even tho he didn't follow my instructions and read the WiKi...I kno that on the Hermes it was able to be unbricked. Is the same for the Kaiser possible? I would greatly appreciate your help as my customers are loving the work you guyz do here in nyc..
Thanks in Advance!
Cristian
What is the current status of the phone?
Can you get into the bootloader at all?
If you can get to the bootloader you should be able to load the AT&T AKU v0.4.4 ROM (the unoffical upgraded AT&T ROM). Once you get that loaded you should flash HardSPL immediately.
Let me know how it goes...
Cheers.
I bricked my tilt when it was less than 24 hours old... I recovered it with a BETA of the ATT rom and THEN redoing the hardspl thingy - worked a treat.
Do a search for tolt bricked and you should find afew threads for it.
The rom is called something like RUU_Kaiser_ATT_WWE....._Internal.exe
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
BTW: The AT&T ROM for the Tilt is actually quite good in the big picture of things. At least the phone is usable (slower than it should be and less memory than it should have, but its still very usable and stable on the official rom). If you want to ***** about official roms, go back to the 8125 and its official rom. The while the device (at the time) was great, that rom made the phone almost worthless (super slow, battery problems, bad radio, dropped calls, freezing, etc). I can't tell you how many people that run custom roms on the Wizard just can't believe what that phone is actually capable of.
Ok, sorry, got off topic there...
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
mfrazzz said:
If you are at the bootloader screen (Tri-Color) then the phone is not bricked. In the sticky at the top on how to revert back for warranty replacement, it has links for the various roms. Just flash an official AT&T rom on it and you should be good to go. Then do the HardSPL.
Cool that you work for AT&T and hang out here! If you have any other warranty returns, I can give you my address as I wouldn't mind having a backup or two...
Click to expand...
Click to collapse
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Quick Silver said:
does Hard-SPL needs to be flashed just once on a device or does it need to be installed every tome a new ROM is going to be Flashed onto it?
Click to expand...
Click to collapse
Only once! Than you can flash as much as you like!
HTCFAN0923 said:
For some reason, it's not being recognized by my Activesync. I got it to recognize it but now it sayz Error 294: Invalid Vendor ID...I'm using the RUU_Cingular_WWE Rom for the Kaiser...so I'm flabbergasted at this point...
Click to expand...
Click to collapse
ActiveSync will not recognize your device when in BootLoader mode!
The Vendor ID error means the ROM cannot be loaded on the Tilt without HardSPL. You need an original Tilt ROM. (That's what I think about this)
HTCFAN0923 said:
It goes to the Tri-Color Screen but stays there..I'll go ahead and research it so I can find the original AT&T and load it up...It shows a lot..workin for at&t and being a member on xda...U guyz have no idea how ya make life easier for my tilt customers b/c at&t truly dropped the ball on the rom...and by offering alternatives..u make the user experience so much better...thanks!
Click to expand...
Click to collapse
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
as far as ur suggestions...It looks like I'm gonna be drunk @ 4am on XDA tonite...lol...
HTCFAN0923 said:
Customers as in I work for an AT&T corporate owned Retail location and they have bought Tilts from me. They kno my Tilt has been modded and they usually want to do the same. I don't charge them for doing mods to their Tilts. This still remains a community where we help each other and I cherish that. Greed has no place here.
Click to expand...
Click to collapse
That's cool... my misunderstanding then. Hopefully no hard feelings .
All in all it sounds like the guy wants a custom ROM so you should probably get the ATT Beta ROM and install that. And then install HardSPL.
Check Kyphur's second post in the thread below for the ROM you want.
http://forum.xda-developers.com/showthread.php?t=343198
Thanks for the info sycho...I'll get to it after work..
Good news! The AKU 0.33 worked! Thanks for ur help sycho!
how can i re-install the window? at tilt 8925
i have wm6.1
i want to reset it so the error message shud gone like Recover ?
@kaal,
It seems what you want to do is a HARD RESET. Please visit Kaiser Wiki and read through. You'll know your phone better that way.
@HTCFan & Sirsycho, Glad you both sort it out in the community spirit Cheers!
sirsycho said:
Oddly enough the "Original" Tilt ROM will not install on a Tilt that does not already have HardSPL on it (to spell it out for you, the CID of the ROM does not match the Tilt's stock SPL). If you check the "reverting back" sticky you'll find all this info already, though it is deep in the thread.
The AKU v.0.4.4 ATT Beta ROM does have the correct CID and will flash on a stock Tilt. SO that is what you are forced to resort to at this point. Once you get the beta ROM installed you can (and probably should) install HardSPL.
After all that, if you decide you want to return or warranty the phone follow the "revert" thread to restore it to "stock" form.
Some additional notes on your problem...
ActiveSync will not connect in Bootloader mode (this is expected). You should see a device show up in Device Manager however, I can't recall the exact description however.
quick flash procedure:
put phone in bootloader
connect usb cable
install ROM
FYI, the problem may not be a bricked tilt... you could try Pof's fix which involves using MTTY.exe to boot the phone, depending on how your "customer" tried to flash it it may just need a kick in the pants to restore it. (search Pof's SSPL for the Kaiser thread for instructions, the thread was closed so you will have to look deep).
<climbing on my soapbox>
Lastly... your use of the word "customer" concerns me... are you charging people for the work you do to their phones? If so, do you donate to the people who make it possible? I'm probably just misunderstanding you, but if you're profiting from others work, perhaps you should contribute (especially if you're coming here to ask for help).
</climbing down>
Good Luck!
Cheers.
Click to expand...
Click to collapse
Because of you folks and this thread, I have a working device as opposed to a paperweight...Thanks!!!
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
Read the SQL Questions thread in the Wiki. It will explain a lot of this to you.
In short, any HardSPL will allow you to flash, it's just the 3.* ones are more compatable with the latest WM6.1 builds.
EDIT:
Normally I'd flame you for this, but Im already flaming another noob atm That doesn't mean someone else wont flame you later.
Ta
Dave
pachjo said:
OK please don't flame me as I am going round and round in circles jumping from one thread link to another trying to get to grips with this stuff!
OK...
The other day I tried to install the hardspl and got the white screen problem.
I followed the thread to sort that out and all appeard ok and the phone continued to work OK under HTC stock 6.1
Yesterday I flashed L26_Kaiser_Diamond_V8_light release and have been playing around with it trying to sort stuff out.
I then started reading the thread about ultimate radios and trying to work out what other radios work with this ROM and how I go about installing them and read I need to confirm the spl I am on and so did the hold camera button and reset to see the spl version.
It says the following:
KAIS130 MFG
SPL-1.0.0liPof
CPLD-8
Now from what I understand it should say SPL-3.2X or similar?
But it does not?
I thought that I needed the SPL-3.2X etc in order to flash cooked ROMS but it looks like I dont have that......so how was I able to flask L26_Kaiser_Diamond_V8_light release ?
Thanks
Click to expand...
Click to collapse
If you are able to flash a ROM onto your device, then you must have an UNLOCKED phone. For simple instructions on upgrading to the new SPL I suggest you visit the following :
http://forum.xda-developers.com/showthread.php?t=398565&highlight=step
Good luck.
Well I am sure I am gonna get flamed for this post, but here goes....
BTW "I AM NOT MOANING OR PICKING FOR AN ARGUMENT" I know this info here is given as is and appreciate the time people spend putting it all together
For the noob there is a trillion things to read here all of which lead to another trillion things which lead to ......
This phone flashing is all new to me and as I paid £434 for it I dont want to brick it, a term along with many I have never heard of before coming here.
I digress...
Anyway after reading and trying to understand it all I have flashed my phone and it works a treat and I am happy, just still in the dark about many things.
The thing is as a noob it is extremely daunting to start to read a thread, wiki etc to try to understand about a topic which diverts you to threads which divert, divert, divert so that after 3-4 diversions you foget what it was you were readiing about to start with!
And then you get to the point....I dont understand this...should I post lest I get flamed.......
So basically from a noobs point of view....everyone was a noob at some point, be gentle with us!
OK.....let the pachjo bash commence...........
Not a flame, just my way of working...
You raise some good points about the amount of info here. But like most here I managed to flash my device without posting a single new thread. If I had a problem with a step I posted there.
_Alex_ has consolodated most info into the single sticky. And there are step by step guides and FAQs on the Wiki.
I just took it one topic at a time:
*Found a ROM, said I needed HardSPL.
*Found HardSPL, installed it.
*Flashed ROM.
*No sound, found thread explaining about Radios. Flashed Radio.
*and so on.
I was (and still do) always reading thread that I found related to me learning as I go and helping where I can. I too like you knew nothing when I first joined and no one minds "noobs" asking questions in the relevant threads when they get stuck, but this is ROM development forum. All new threads should pertain to ROM "development".
Ta
Dave
you must use (aka JumpSPL )file before changing the SPL
this jumber must be in your device before flashing the new hard SPL
see hare and read carefuly :
http://forum.xda-developers.com/showthread.php?t=396922
got it from here also
http://forum.xda-developers.com/showthread.php?t=354061
cheers
Thanks guys.....am reading away and will take onboard your comments
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
thomassster said:
first off, you can flash any rom with the olipof hardspl 1.0. the problem is, you will get screen freezes every once in a while. Using jumpspl, you can go to another hardspl. Usually jumpspl is included in all the new hardspls, but maybe not. Get familiar with what jumpspl is and then switch to hardspl.
Click to expand...
Click to collapse
Yep... I shall do that!
I have gone flash crazy as I am now gonna whack on L26_KaiserDiamond_V9
I am amazed at how fast my apps are loading now I am no longer on the stock ROM!
The phone reception is better, the SRS WOW is fandabbydosey its all good for me, and I have fixed (well found the solution to at least one of my gliches also)
I swear I have used the Search tool, but lots of topics have HSPL in their title, and I weren't able to find any FAQ topic talking about that.
Everybody here talks about SSPL, HSPL, how to use them and so on. The only think I understood is that to flash custom roms you need HSPL, and for official roms SSPL is "enough". Could anybody tell me something more and explain me why do we need this stuff to flash a rom and not just run a .exe on the device which could do everything automatically?
I also didn't understand what the Radio is. I thought a part of the rom which manages the GSM/3G antenna, but I think I am wrong.
Thank you in advance
Black Antitoon said:
I swear I have used the Search tool, but lots of topics have HSPL in their title, and I weren't able to find any FAQ topic talking about that.
Everybody here talks about SSPL, HSPL, how to use them and so on. The only think I understood is that to flash custom roms you need HSPL, and for official roms SSPL is "enough". Could anybody tell me something more and explain me why do we need this stuff to flash a rom and not just run a .exe on the device which could do everything automatically?
I also didn't understand what the Radio is. I thought a part of the rom which manages the GSM/3G antenna, but I think I am wrong.
Thank you in advance
Click to expand...
Click to collapse
okay
spl = Secondary Program Loader. Think of this in the same sense as bios on a pc. (it sets where your system boots from, intialises sub system process etc)
sspl = soft spl (this allows you to flash another spl or hardspl).
hardspl = hard spl .. basically it allows flashing of any rom. It protects you from bricking your device. If you have a bad flash it just forces the phone to load into bootloader, from where you can flash another rom using pc or storage card to get your phone working again. Using a hardspl you can flash any carrier rom without cid unlocking your device first.
Radio = you are correct about your assumption as to what a radio does .
Now if you are flashing your carriers official rom than you don't need any of this stuff but different carriers set their cid in their roms so only phones that have their cid can flash those roms ... now if you like the wwe htc rom and want to flash it onto the tilt you will first need to hardspl your device or otherwise you won't be able to flash the rom ... it will time out with an error telling you invalid vendor id.
Many thanks! Now it is much clearer! Just one more question: why do people care so much for the radio and post their radio version to their signature? Is the radio revision so important? Why is it not just part of the rom?
Thanks again!
Black Antitoon said:
Many thanks! Now it is much clearer! Just one more question: why do people care so much for the radio and post their radio version to their signature? Is the radio revision so important? Why is it not just part of the rom?
Thanks again!
Click to expand...
Click to collapse
well radio is definitely important ... i mean if you have a uncompatible radio you will loose sound, camera, connection etc on your phone. Reason people list the radio they are using is basically to let others know what radio is working for them on the rom they have. This way if someone else doesn't know which radio to use with the rom than can use the radio they have listed. Radios are location dependant. Some radios give better reception here in states while others give better reception somewhere else in the world.
Most of the time chefs will include a radio with their rom, but some leave it out so you can choose the one that works best for you. Just a keynote to keep in mind when selecting radios is that wm6.1 roms need wm6.1 radios and wm6 roms need wm6 radios. Also DO NOT flash a radio that is intended for another device i.e a rapheal radio onto a kaiser (this will brick your device). There are exceptions to this rule. Also you should get your phone security unlocked before proceeding with flashing various kinds of radios. This will save you from getting stuck with a radio that locks itself to the device (thus rendering itself unchangeable; no matter how many times you flash another radio you will be stuck with that radio) an example of this is "the radio from hell" which alot of people in the kaiser forum got stuck with and weren't able to get rid of it until "FrankenKaiser" came along.
Hope this helps.
Thank you, it does.
Another term I read is Jump SPL. What's that?
Some poeple encounter problems trying to flash hardspl, Jump spl "jump starts" the process.
(problems like the kaiser white screen issue here)
Ok, thank you all.
Now I only have to wait for the Blackstone Hard SPL.
Black Antitoon said:
Ok, thank you all.
Now I only have to wait for the Blackstone Hard SPL.
Click to expand...
Click to collapse
aren't we all ... hold tight though they are close to getting it done.
How do you know that? In the placeholder topic there has been no update about the development status since a while.
WOW!!
Just wanted to say a HUGE thank you to thesire and joel2009 for being so extremely nice to a newbie!!! This is probably one of the first posts I have seen where a newbie doesn't get their head bitten off for asking a question. (I don't think I've ever asked a question for that very reason! LOL)
I was searching for the answer to 'what is SSPL' because I couldn't find it in the Wiki acronyms section. What a pleasant surprise! Sorry if this steers away from the topic but I just could NOT pass over this thread without saying THANKS!!!!!!!!
You wont get flamed for asking Questions in this Forum
as for the Acronyms, try here
http://forum.xda-developers.com/forumdisplay.php?f=265
more here : http://wiki.xda-developers.com/index.php?pagename=FAQ#techicalJargon
my friends, you need to master the art of searching
So I actually risked to find my skin burnt by the flame?
I didn't even know that there was a wiki/knowledge base here. Well, I actually felt somthing like that, but I completely forgot about that when searching. I searched carefully indeed, but only in the forum, and since lots of topics contain the words SPL, HSPL and so on, I was unable to find relevant results.
I'll look there next time, thank you all again.
missbizzylizzy said:
Just wanted to say a HUGE thank you to thesire and joel2009 for being so extremely nice to a newbie!!! This is probably one of the first posts I have seen where a newbie doesn't get their head bitten off for asking a question. (I don't think I've ever asked a question for that very reason! LOL)
I was searching for the answer to 'what is SSPL' because I couldn't find it in the Wiki acronyms section. What a pleasant surprise! Sorry if this steers away from the topic but I just could NOT pass over this thread without saying THANKS!!!!!!!!
Click to expand...
Click to collapse
hahaha.... why do you think i finally posted my first post after joining for 2 years. I just didn't want to tick someone off
Now i finally understood the term "SSPL & HSPL"!
how to find original SPL FOR HD2
Does anyone know where to fin dthe original 2.10 spl for hd2 so i can return it ?
Ok here goes. Be nice, I'm new...
I have a Stellar in front of me (or Kaiser, TyTynII etc) which has managed to get itself into Boot Loader. I'm usually pretty good at getting these out of it but this one has me stumped, and I'm hoping someone may be able to give me some suggestions, or confirm my suspicions that it is kaput.
It's in Serial mode at the moment, showing
KAIS130
SPL-1.82.0000
CPLD-8
on the top of the screen.
So I plugged it into the computer and it nicely popped into USB mode which then let me flash it, using the file: RUU_Kaiser_O2_UK_1.82.206.1_radio_sign_22.45.88.07_1.27.12.32_Ship
This appeared to take, started the process, splash screen loaded, windows mobile loaded OK and for all intents and purposes was back at the factory reset (which is what I wanted). HOWEVER.....when I performed a soft reset it went back into Boot Loader and I'm now back at square one.
Any ideas? I can't install any homebrew ROMs on this, it HAS to be the standard ROM for reasons I'm not at liberty to post here (don't worry nothing illegal is going on, suffice to say, I shouldn't really be here!)
I have at least 2 others that are doing similar as well and would like to get these fixed also. All help/comments gratefully received and I apologise again if this is covered somewhere else.
It seems you have not done any SPL hard flashing yet.
Did you really read the Flashing for Noob sticky ? It's there .. first you need to do hard SPL, SIM/CID Unlock, then only you can change your ROM to anything.
Please go back and re-read.
Sorry. Will this do anything bad to the device, only I've never done anything like that before, I've just run the ROM flash file. I've never had to do anything like you suggested before. It needs to be put back to factory as it is going to get allocated to someone - which means I then have to install a clone over the top of this.....sorry if I'm being thick. I did read the document you suggested but that resulted in me getting more confused.
If this is not the right place for me to be, please feel free to close this thread and I'll keep looking elsewhere. Cheers.
Hi,
First of all: what do you want to do? Read this to clarify your intention
Take your time, read through the WIKI first.
After that, if you still want to flash, go to the Noob sticky.
If you don't have the passion, I'd suggest just use the phone as from factory. Reading the Wiki still will give you insight and many good tips/tricks without flashing.
Edit to addI apologize.
After re-reading again, it seems that what you're trying to do is reviving the dead Kaiser. From the SPL version, it's not yet 6.1. You can check out here to see any other official ROM matches, which what you currently use seemed to be correct.
Mod, please merge this with Kaiser stuck at Bootloader thread ..
Good luck.
Edit 2
It seems that when you did a soft reset (by pushing at the small hole using stylus?), the other two buttons (camera + power) are still pressed (or due to hardware, kept being pressed), thus resulting in boot loader displayed again?
Well that's why I couldn't work out why I couldn't get the ROM to stay.....this has never happened before! So yes, I am trying to revive a seemingly busted Kaiser. The customer handed it to me in Boot Loader mode. Usually running the RUU fixes this and we can then go about rebuilding it. However in this case it really doesn't want the factory ROM but I need it to! I can quite easily get it into USB mode and flash it by running the .exe file on my desktop - but then that's about all I can do. I can't give it back to the customer as the next time he performs a soft reset or switches it off, it'll be back in Boot Loader...ARGH!
Oh, and apology accepted!
And another thing, I just tried running the exe file again and got as far as the screen alignment and the poxy thing just locked....cue soft reset and back to Boot Loader. Me not happy.
Edit: A quick check of the Hardware and all the buttons appear to be OK - nothing looks like it's stuck down
If you want to take the looooong road, perhaps you can do flashing Hard SPL, unlock SIM/CID and then flashing any other ROM/Radio. Once you get a stable working device, you can flash back the OEM using this method
I'm not sure if this custom RUU can help: http://forum.xda-developers.com/showthread.php?t=334890
I haven't tried that, so it's just an idea for now.
Thread closed.
If you are still having problems with the bootloader check out my sticky.
If you need help with the flashing process check out mskip's sticky.
Only create a new thread for new issues that have not been discussed before.
Good luck
Thanks
Dave
OK, I too skim read (I read a lotta threads ).
PDA-Princess
I've sent you a PM.
Dave