Database Info

Bluetooth "license expired" problem

Hi all,
Not had any response in the Alpine group, so thought I would ask here because from looking at old posts, It appears this problem has afflicted several models.
I tried to use the blueooth for the first time in ages and I get an error message saying the license has expired, then the bluetooth is turned off automatically.
I found some earlier articles about this problem, and they suggested a solution was to install a Broadcom bluetooth driver update, which the author posted as an attachment. I installed this and reset the device, but when I click on the bluetooth icon I just get the same error message as before.
In case my customised ExtROM was the problem, I installed the standard O2 1.11.169 ExtROM, but the problem is still there. This is wierd because I have used bluetooth under that ExtROM version successfully in the past!
Can anyone help me???

I bought a kit that had 2 USB transmitters to add to PC's without Bluetooth. It was by Energy Systems.
Unfortunately, the fist time i installed it, it gave out this error. The one regarding expired license.
I have never got to use it and was wondering what the fuzz was all about. If you do get it working, please inform me about the solution on how to get rid of the license expiration thingy.
Thanks

your choices are 1.Get a new phone. 2.Look for the latest driver for your phones Bluetooth and try to install it. 3.Try factory resetting your phone. hope it works out.

Blackberry Conncet / Treo 750V Problem

Hi Folks,
I know, there are so many postings about problems with the Palm 750v and Blackberry Connect. But because I desperately need help and I can not find a solution for my problem, I raise this question again.
My device:
Treo 750v from Vodafone Germany
Software-Version: TREO750-1.16-VFD (latest one)
Firmware: 1.12.0c.00
For Blackberry I am using the software which Palm and Vodafone promote on their homepage.
Blackberry-Version: 2.1.1.31
My company has an Enterprise server an everything is set-up properly.
NOW THE PROBLEM:
Once it starts connecting to the server, after the message DatecTunnel is available it is going to turn to: NO CONNECTION and this is not going to change.
By the way, the PIN is generated without any problem or failure again.
Pls Folks try to help me, because otherwise my destiny will be that I will be forced by the company to change to a BB device :-( So guys, this is a real emergency case.
Looking forward to your kind reply.
Bye
Dirk

dhuels said:
Hi Folks,
Treo 750v from Vodafone Germany
Software-Version: TREO750-1.16-VFD (latest one)
Firmware: 1.12.0c.00
For Blackberry I am using the software which Palm and Vodafone promote on their homepage.
Blackberry-Version: 2.1.1.31
Click to expand...
Click to collapse
With firmware 1.12.0c you have to use the client 2.1.2.52 attached in this thread:
http://forum.xda-developers.com/showthread.php?t=304670

Hi, thanks for your suggestion. I tried it, but it did not work either.
Any other idea ? I am getting mad about that.
Thanks in advance for your kind help.
Dirk

Hi, I re-install everything, soft reseted and now it connects. This is the first step, but still I can not receive and send any mail. Any idea ?

You have to cradle the device with the BlackBerry Desktop Configuration Tool for Windows Mobile on a PC within your company network. This way you connect to your companys BES and get the service books you need.

Sorry, maybe I did not mentioned it. I did this already, but still, no success.

maybe I have to use a different version as well ?

Do you have service books on the device? Check the settings in start >> system >> blackberry.
Normally when you start the BB connect desktop and click on connect, you have to generate a key by moving the mouse. Then your calendar is loaded to the device. Did that happen?

Yes, services are booked. I generated the key and calender was loaded. that is all fine. but still no emails are delivered

Delete the service books (should be 3: ALP, CMIME and CICAL). Then cradle the Treo again and click on connect. Calendar is loaded and key generated.
Plug out the device and make sure that no other programs as Active Sync or Internet Explorer are running in the background (check in task manager on the Treo). Then go to blackberry settings and use the option "register now"

Did it, but no change. The only thing I realized, that a key was not generated, by moving the mouse, because system did not asked for it. But when I see the BB Desktop Software, my PIN is still there. Maybe how to clean the BB Desktop Software ? I de-install and install it again, but the PIN is still there. Does it has something to do with that ?

To make sure that everything is fine on your side, do the following:
Uninstall the Desktop Configuration tool.
Then install this version:
http://sems.org/content/download/bbc4/activesync_bbconnect_desktop_setup_4.0.0.17.zip
Don' t use the default path, change it to another one.
Uninstall the BB client from Treo.
When asked if you want to preserve configuration settings, check no.
Reboot the Treo.
Install the BB client again.
Reboot the Treo and when you are connected do register now.
Then cradle the Treo to the new desktop tool and click configure wireless device.
If you still get no emails then, there is a problem with the settings of your user on the BES and you should contact your BlackBerry administrator.

Hi !
I checked with my Admin and with Vodafone. Finally it was a problem on Vodafone side.
That is the comment from VF: I have checked the Phonenumber. The User uses a Palm-Device, and on the RIM-Database, was the Device a Prosumer-Device.
So I changed the settings on the RIM-DB, and resend the necessary Servicebooks. The Device should work better now (maybe make a Softreset from the Palm)
After that and a soft reset all works great.
Thanks for your kind help, which I appreciated a lot.
Dirk

dhuels said:
Hi !
I checked with my Admin and with Vodafone. Finally it was a problem on Vodafone side.
That is the comment from VF: I have checked the Phonenumber. The User uses a Palm-Device, and on the RIM-Database, was the Device a Prosumer-Device.
So I changed the settings on the RIM-DB, and resend the necessary Servicebooks. The Device should work better now (maybe make a Softreset from the Palm)
After that and a soft reset all works great.
Thanks for your kind help, which I appreciated a lot.
Dirk
Click to expand...
Click to collapse
Hi can you explain how you changed the RIM-DB settings? I have the same issue changing from an E61 trying to setup a Voda 750v

RFBakeruk said:
Hi can you explain how you changed the RIM-DB settings? I have the same issue changing from an E61 trying to setup a Voda 750v
Click to expand...
Click to collapse
Sorry, I can not tell you, because my ADMIN did that in co-operation with VF. But it seems, that if at VF side your device is registered as a BB it will not work, therefore there must change it. Call your ADMIN and VF and tell them that you are running the BB service with a WM device and tell them it's a PALM Treo.

FIXED - ActiveSync not working via USB on WM6 Wizards

This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.

hi,
i have tried it, but it doesnt work. do you have made spacially things to get i work ?

Not really. Installed ActiveSyncMode. Ran it and selected USB mode instead of RNDIS mode. This fixed the problem for me with a WM6 upgraded 8125 and 2 other friends with Original ROM 8125 and Original ROM MDA.

i unchecked "Enable advanced network functionality" in USB to PC settings on my phone and got activesync to work for me when i was having trouble

us687008 said:
This is to everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
Hi! I've got the same problem, and i was solutionated with reinstall the activesync. So go to microsoft site, and download the activesync 4.5 again. After that try to sync your pda, and maybe its solve.

THANKS VERY MUCH
YOU SOLVE GREAT PROBLEM

us687008 said:
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
THANK YOU!!! What exactly does this cab do to fix the problem?

us687008 said:
This is for everyone out there who upped to WM6 on wizard models and found ActiveSync not recognising your fone over USB. Download ActiveSyncMode.cab (sometimes named ActiveSyncMode.sa.cab) and install it on your Fone. Run it - Start/Programs/ActiveSyncMode.exe -
http://www.utstar.com/pcd/downloads/ActiveSyncMode.sa.CAB
Select 'USB Serial Sync Mode'. Now try connecting your fone and it should work.
I tried almost 50 posts and advices over 3 days and this one worked like a charm. I know there must be other issues with other fones which have different solutions. Please feel free to add to this thread all/any verified solutions.
Click to expand...
Click to collapse
I had to reinstall WM6 and now ActiveSyncMode.sa.CAB no longer fixes my connectivity problem. I'm getting fed up with WM6.

I have tried everything else and will now try this. I did not realize that this was such a problem, until I started researching to solve my own problem. So good luck to me.
Fixed it with my own build. So far. I still have to try and sync with another computer. That is where the biggest problem has been for me, is syncing with two computers.

Under Vista 64, I normally have McAfee firewall at the highest setting and also have Windows Firewall on.
At first, after upgrading to WM6, I could not sync. I then found some registry fix procedures and tried them but it did not work. I then installed ActiveSyncMode.sa.cab and it allowed me to sync. Maybe that combined with the prior registry fix might have allowed me to sync.
However, after I uninstalled WM6 and reinstalled it, I could not sync anymore. I installed ActiveSyncMode.sa.cab again, but it did not work this time. I did not try the registry fix this time because I can't find the procedures, which I originally found online. I can't remember how to find them again.
I then turned off both Windows Firewall and McAfee firewall and I was able to sync again.
I then reinstalled Windows Mobile Device Center while having the firewalls off, hoping it would allow the installations to complete properly.
I then turned on Windows Firewall but it was still blocking the sync.
I restored Windows Firewall back to default and it made it worse. I then had to reinstall Windows Mobile Device Center and was able to sync again with Windows Firewall on. Often I would have to disconnect the cradle to establish reconnection.
Next, I needed to figure out how to turn on McAfee firewall and allow it to sync.
I then contacted McAfee and they told me to exclude Universal Plug and Play (UPNP) port 5000 and Windows File Sharing (NETBIOS) port 137-139. It didn't work exactly until I lowered the firewall one level. What all this networking stuff means, I don't know. I'll have to do more searches on them.
I now need to figure out how to put McAfee firewall back at maximum level while still allowing me to sync.

a_ok2me said:
Under Vista 64, I normally have McAfee firewall at the highest setting and also have Windows Firewall on.
At first, after upgrading to WM6, I could not sync. I then found some registry fix procedures and tried them but it did not work. I then installed ActiveSyncMode.sa.cab and it allowed me to sync. Maybe that combined with the prior registry fix might have allowed me to sync.
However, after I uninstalled WM6 and reinstalled it, I could not sync anymore. I installed ActiveSyncMode.sa.cab again, but it did not work this time. I did not try the registry fix this time because I can't find the procedures, which I originally found online. I can't remember how to find them again.
I then turned off both Windows Firewall and McAfee firewall and I was able to sync again.
I then reinstalled Windows Mobile Device Center while having the firewalls off, hoping it would allow the installations to complete properly.
I then turned on Windows Firewall but it was still blocking the sync.
I restored Windows Firewall back to default and it made it worse. I then had to reinstall Windows Mobile Device Center and was able to sync again with Windows Firewall on. Often I would have to disconnect the cradle to establish reconnection.
Next, I needed to figure out how to turn on McAfee firewall and allow it to sync.
I then contacted McAfee and they told me to exclude Universal Plug and Play (UPNP) port 5000 and Windows File Sharing (NETBIOS) port 137-139. It didn't work exactly until I lowered the firewall one level. What all this networking stuff means, I don't know. I'll have to do more searches on them.
I now need to figure out how to put McAfee firewall back at maximum level while still allowing me to sync.
Click to expand...
Click to collapse
After doing all the steps above, I found that all I needed to do was lower the McAfee firewall level one notch to be able to sync. However, I'm still going to figure out why I had previously been able to sync at the maximum security level. There must be some exclusion that got remove that I need to add again.

Activesync and HTC s620 issues.
This issues is driving me completely insane, So far this thread is about the only related info on the problem too. I find it hard to believe there aren’t more people out there with these issues, anyway here’s were I’m at:
Got a HTC s620 Smartphone from BT, Active sync simply didn’t work from day one and me being an IT support guy I haven’t been able to resist going back to the issue.
For over a week I have made pretty much no progress at all, I can’t find a activesyncmode.sa.cab file for my phone that works yet so got nowhere with that, the HTC website is about as useful as a chocolate fire guard.
The first leap of progress was spotting a trick on here of disabling the advanced network functionality on the phone its self.
It was baffling me at first why my computer was picking up the phone as if it was a network adapter. (And trust me I tried all sorts of in depth stuff down that avenue). It makes sense now though that the Smartphone can be setup to act as a network adapter/modem. Hence now I’ve disabled the advanced network functionality on my phone Active sync instantly make noises and hey presto ‘Connected’ and then a few moments later I’ve now got some other critical error
So my quest continues, but I will get to the bottom of this if it kills me!
So for the record, anyone with a HTC s620 Smartphone running Windows Mobile 6, before you do anything else do this:-
Start
Settings
6. Connections
7. More…
4. USB to PC
(Remove the bloody tick from box) Enable advanced network functionality
I will report back with my next hurdle…
OK, as much as I’d played around with my firewall it would turn out that this is the second culprit causing my problems. I tried installing Activesync on my Laptop and Desktop and had the same errors, however the only thing those to computer have in common is the Iolo System Shield installed. Last night to just ensure I wasn’t going mad, I tried it on my wife’s laptop and hey presto! It worked first time. So naturally, I’ve uninstalled the Iolo System Shield from my computer and bingo, worked straight away.
This is annoying however, because I did everything from the Microsoft Help setting up exceptions etc. in my firewall. But there you go.
In brief:
Check your device has the advanced network functionality disabled.
Uninstall your 3rd party firewall and test to pin point the cause, then you know what you’re dealing with.

Just a second thought of advice, one of the first things I tried was disabling the firewall, from my experience that wasn’t enough, it had to be uninstalled to get it to work. Before anyone else goes down the hair pulling road of trying anything and everything under the sun, uninstall your firewall/system guard software. At least if it works after that you know exactly what is causing the problem.
Then getting it to work with the firewall installed is something you can focus on possible in conjunction with the software vendor.

I fixed teh same problem by unchecking the advanced box but .....
after oving back to wm5, I cant connect as well. I look for the working solution from WM6, but I cant find the menue to disable the advance usb connection.
It looks like that is the problem to sync with vista 64
Hope somebody has a idea.
thx in advance

My USB connection to activesync stopped working. (although at my second pc it still works OK)
It works via InfraRed though!
I think this USB problem started when I was trying to connect via bluetooth.
Don't you just hate ActiveSync!?
Well, maybe the problem is with Windows XP... because it doesn't recognizes the PDA.
Anybodies help? Thanks in advance.

No file ActiveSyncMode.cab !
Help

No worries, new link:
http://www.pcdphones.com/downloads/ActiveSyncMode.sa.CAB
Also attached to be safe

would be a shame to let a useful thread go into some archive, so I'm resurrecting this oldie.
Also, I remedied this activesync issue with a more straigtforward fix. Fresh flash of 6.5. After deleting all the USB devices in the device mgr (didn't help), I saw there was a WM6.5 setting for default behavior on PC Connection (or something similar to that). Changed it from "setup" to "sync" & that silly white toggling screen went away and allowed a flash back to 6.1.

Certificate fault?

Hello guys.
I recently got a S710 from a friend with Windows Mobile 6. Everything was working fine (couldn't get Windows Live Messenger on it but that's ok).
Now I upgraded it to Windows Mobile 6.1 (Gonzo), and it had Windows Live already on it. Now, everytime I try to connect it says:
Code:
The Windows Live ID service requires a certificate, but yours isn't working. You can probably fix this by updating the time and date in your device's settings. After you do that, try connecting again.
My date and time are okay, I even have 'Automatic time-zone' enabled.
Windows Update doesn't work either, gives me the following error:
Code:
Connection to update server was not available. Check your data connection settings and ensure the device date and time are correct.
I don't think it's my data connection settings , because I can use Internet Explorer without any problem. I did use the search function, but couldn't find much.. can anybody help me with this one?
P.S. I'm kinda new to Windows Mobile.. so please try to keep it noob-friendly
Thanks in advance!

I'm having the same problem with the Neo rom

nobody who has an answer to this ?

Im stuck with this too. I installed a different version of windows live, off this site and now no WL services work. It even screwed my messenger, which i had on the handset as stock.

There are a lot of WM 6.1 ROM which has this problem. Can you please try fireburned WM 6.1 Clean Stable ROM? It doesn't have this issue.

[Q] Certificates

Ever since I upgraded to 7661 and 7720 I can't connect to my emailserver.
Using a self signed certificate results in a 85002012 error and no way to connect.
So I bit the bullet and bought a certificate. I got a certificate from Godaddy thinking this will solve all the problems.
Well, my phone does connect to the server and then stops dead in its tracks. Now the error code suggest there is a problem with the certificate, error code 80072F06.
I've been trying every trick in the book to get it to work but no luck. Current location: up a certain creek and no paddle.
I checked with Microsoft who claims the certificate is supported in WP 7. Does anyone have a working solution to connect my Omnia 7 with a Kerio Connect server using intermediate certificates?