Related
Hi there,
I was using Mapopolis GPS software ver 3.20 on my SX-56 and it was working fine with the GPS reciever being picked up on COM 1. Suddenly one fine day, the Mapopolis software would not work at all and the phone for some reason would not detect the reciever on COM 1. I re-booted, re-installed and eventually blew my ROM and thus the phone entirely trying to work the GPS but to no avail. I kept trying since when I connect the GPS reciever even now directly to my laptop, it still works fine so I assume there is nothing wrong with the GPS unit itself!
I have just bought a new T-Mobile WM 2003 unit and after installing mapopolis on it, it still is not working on the GPS and giving me the exact same problem. I have put it on "autodetect" and it goes in a loop on the COM Ports and starts from COM3, then COM8 and then COM9 then back all over again...it does not even start from COM1...when I remove "autodetect" and set it on COM 1, it keeps saying detecting and nothing happens, I've left it like that for more than an hour!
I'm just wondering why it was working before and not anymore? Any suggestion or ideas are more than welcome! Are any program trying to block the COM1? If so, how do I get rid of them or free the COM1? I'm stuck...
Thanks.
Try to deactivate the beam of IR port.
Or take a look if the Activesync doesn't use the com port.
It you're using a IR external Keyboard deactivate it...
Bye, M.
Re: COM Problem
Sir,
You are a king!!! Just saved me from blowing up yet another fantantic PDA!!! I don't know how to thank you, it was the IR port occupying the COM and it is working great now after I disabled it!!! Just a small question for you, is it possible to fix my old PDA which I totally messed up because of re-setting etc etc.? I have the problem posted on:
http://forum.xda-developers.com/viewtopic.php?t=11858
Thanks in advance.
Munz.
tv tuner
Is it possible to use mda2 as a monitor to watch tv out of home, connecting it to an usb-tv tuner?
Re:
I doubt it since the USB-TV Tuner would require a USB port for a connect through and I do not know of PDA which have that, but then I may be wrong....
Don't know if anyone else here has tried this workaround at all?
Using the remove programs in settings or activesync, remove Tomtom Bluetooth GPS Support (or whatever it's called).
Instead of setting up TT5 to use "Other Bluetooth GPS", set it up to use "Other Cable NMEA GPS".
Set the GPS Baud rate to 9600 or 19200 (both work fine for me).
Then set the COM port to "Bluetooth Serial Port COM6:" (or whatever your outgoing port number is for your BT GPS device.
The only downside is that you have to turn BT on manually before you start TT5 but it doesn't disconnect BT when it exits.
Used this setting on 3 different roads which lately caused me no end of lock-ups and not once has it happened. I think the problem is with Tomtoms bluetooth support drivers, constant problems with them since TT3.
I've only used this for 3 days and 400 miles but everything seems to be fine up to now, including traffic...........we'll see.
TT5
Did your TT5 load onto the XDA with no problems?
I have an XDA IIi and it loaded on no problems at all.
I have an XDA IIi and it loaded on no problems at all.
Great suggestion. I was getting really fed-up with TT5 and about to give up on it. Just back from France/Switzerland where it kept freezing, useless.
Simply uninstalled the TT GPS Support as suggested and used the existing BT Partnership with the TT Receiver and hey presto ... TT running smoothly again, shame I'm back in the UK on roads I know!
Does not work for me. But well worth a try.
This is doing my head in now £200 worth of TomTom software and dongle and unusable with the phone on!
arh help please
I have a problem with my XDA11 whilst trying to upgrade my navigator 3 software to navigator 5......
After I load the main program upgrade and then try to install the map disc one my pc ( desk top XP Profesional os ) it come up with tempory folder full, does'nt say if it it the pc or the xda11.
I have gone into all the temp folders on the pc and emptied them and it had not resolved the problem and I cant find any in the search function on the XDA
Any ideas??
Its a genuine copy of the Tom Tom software as well and there are no contact details on there sites including e-mail links
Regards Lee
there are known issues with Bluetooth device support using TomTom5, i was advised to use the 'Other Cable NMEA GPS' option when connecting a non TomTom bluetooth GPS unit.
also, i connected at the baud rate recommended by the manufacturer which i think was 9600, this worked fine without removing any parts of the software but meant manual switch off of Bluetooth in my MDA after use.
in addition to this, the Bluetooth connection issues with non TomTom GPS units should be resolved in the 5.10 upgrade, just installed it and re-paired an MDA3 to the Globalsat GPS receiver...it now auto switches off Bluetooth after use and the connection can be made using 'Other Bluetooth Receiver'.
another bonus of the 5.10 update is the keyboard shows on the display without having to use the hardware keyboard on the MDA...lovely.
for more info:
How to manually configure TomTom NAVIGATOR 5 for Bluetooth GPS receivers.
answer to last question about free memory during install problem can be found here:
When I install the TomTom NAVIGATOR 5 Upgrade the following error occurs: - Not enough free space occurs on temporary folder. Cannot run Setup
reply
Thanks for the link dont know how I missed that....
Only problem now is when I tap Start etc there is no Run command to enter the %......% command line
I tried the search in explorer option with no results any ideas?
Sorry I'm not the brightest lamp on the planet
you are tapping Start on your PC right?
maybe the 'Run' command has been disabled or does not appear in your Start menu because it's been disabled.
are you the Administrator of your PC? are you running XP?
you may have to go into 'Control Panel', 'Taskbar and Start Menu', Start Menu tab and choose 'Classic Start menu'
trying to cover as many bases here so you can make some headway without too much back an forth as i'm signing off now....if you can get to the 'Run' command on your PC then you'll be able to solve the problem and proceed with the fix from the TomTom site.
good luck.
I have had so much trouble with satnav on pda's, especially with bluetooth that although I have xda 1 with wired gps and spv M1000 with bluetooth gps I have just boght a Mitac Mio 269 dedicated gps system. It has a 2.5 gb hard drive, 500 megs for mp3, the whole of europe, which is millions of miles, preinstalled on the system. Comes with remote and different mounts and has sd card expansion. Obviously it isnt any good for phone calls or word processing etc but it gives me peace of mind when travelling as I have zero sense of direction and very little patience. I still leave my other gps in the car though, as a backup. :shock:
I have had so much triouble with satnav on pda's, especially with bluetooth that although I have xda 1 with wired gps and spv M1000 with bluetooth gps I have just boght a Mitac Mio 269 dedicated gps system. It has a 2.5 gb hard drive, 500 megs for mp3, the whole of europe, which is millions of miles, preinstalled on the system. Comes with remote and different mounts and has sd card expansion. Obviously it isnt any good for phone calls or word processing etc but it gives me peace of mind when travelling as I have zero sense of direction and very little patience. I still leave my other gps in the car though, as a backup. :shock:
Thanks
Decoy-7
Many thanks I told you I wasn't to bright you hit the nail on the head with the ( PC comment ) I was looking for the run command on the XDA11...
deleted the exe and evrything is loading up as we speak....
thanks again for your patientence....
Crusin-thru' I can see why you have gone your route its a lot less trouble I just use mine now as a back up phone because I spend a lot of time away from home and just simply use a Nokia 6680 on 3G.....
Also since I stopped using the XDA11 as a phone the pda doesn't keep resetting itself every ten minutes like it did!!
cash_13,
it happens to the best of us...had to think about it myself, instructions on the TomTom site could have been more specific saving many people a lot of time...but you dont always realise this until you have to follow the instructions yourself....glad you got it sorted now.
Have just installed WM6 (JW 2.02.02 WWE) and everything appears to be fine except for the BT com port in TomTom Nav5. Have paired the BT GPS, set the outgoing port (COM0) but it doesn't appear in the list of ports available in TomTom.
Is this a known issue or have I got to set something else? Have also tried the External GPS manager in 'Settings' but that port doesn't show either.
Sheepdip said:
Have just installed WM6 (JW 2.02.02 WWE) and everything appears to be fine except for the BT com port in TomTom Nav5. Have paired the BT GPS, set the outgoing port (COM0) but it doesn't appear in the list of ports available in TomTom.
Is this a known issue or have I got to set something else? Have also tried the External GPS manager in 'Settings' but that port doesn't show either.
Click to expand...
Click to collapse
I've had the same problem.
What I've done about this, is I've added a Serial port profile for the GPS device. Then went into TomTom and the port was in the list. This port has worked fine.
Tried setting External GPS in the Settings/Connections, to share it, well - TOUGH, does not work.
So I have a working TomTom and I gave up for now about the sharing stuff...
Try setting port 8.
I'm not interested in sharing it (at the moment).
Can you explain what you mean by 'added a serial port profile'?
I've set up an outgoing com port in settings > bluetooth > COM ports but it's not seen by TomTom
tyl said:
Try setting port 8.
Click to expand...
Click to collapse
I must have tried all the ports that were available but none of them show. All I get is the standard TomTom list: -
QCT Data Interface
Serial Cable on COM1
COM7
RIL on COM6
Infrared Port
Ir on COM3
and of course non of those work either.
Sheepdip said:
I must have tried all the ports that were available but none of them show. All I get is the standard TomTom list: -
QCT Data Interface
Serial Cable on COM1
COM7
RIL on COM6
Infrared Port
Ir on COM3
and of course non of those work either.
Click to expand...
Click to collapse
Exactly where you wrote it, in COM ports.
Then I've selected "Other Bluetooth GPS receiver" as receiver type in TomTom 6, and here's what I have:
COM5:
QCT Data Interface
Serial Cable on COM1:
COM7:
RIL on COM6:
Infrared Port
Ir on COM3:
COM4:
COM5 is my attempt to share GPS which is failing so far, so disregard it for here (but I'll try COM8 later). COM4 is the Outgoing Bluetooth port and that's the one I selected.
I must admit that I honestly don't understand why this setup works for me. I expected to put Incoming port number (a common for all devices) there, but obviously didn't have it.
Hmmm, that's strange. What you have is exactly what I used to get in WM5 but it doesn't seem to work in WM6? I'm also on TT5 so that may be an issue?
From what I can see, the 'QTC Data Interface' is the GPS sharing port and is actually COM9, installed by the OS. But it doesn't work!
Frustrating............!
I'm also getting tons of memory leak by the looks of it.
SORTED!
Feel a bit stoopid. Checked the version of TT5 and it showed 5.0. Upgraded to 5.21 (which is what I thought I installed) and bingo! Com port shows and works.
Thanks to all who made suggestions.
Sheepdip said:
Feel a bit stoopid. Checked the version of TT5 and it showed 5.0. Upgraded to 5.21 (which is what I thought I installed) and bingo! Com port shows and works.
Thanks to all who made suggestions.
Click to expand...
Click to collapse
Man, my TomTom is version 6.010.
Just in case, it's available.
put in External GPS the program port on 8.
then you will see com 8 in TomTom.
connect it in TomTom and after that change the program port back to none and hardware port on 8.
problem solved.
I've had this problem on a Mini S, Exec, Vario II.
Some times just removing TomTom and re-installing it seems to work. On several occasions the correct COM port shows up in TomTom. I honestly don't know why. It seems a bit random.
Airax said:
I've had this problem on a Mini S, Exec, Vario II.
Some times just removing TomTom and re-installing it seems to work. On several occasions the correct COM port shows up in TomTom. I honestly don't know why. It seems a bit random.
Click to expand...
Click to collapse
I have seen some recommendation to not select Bluetooth receiver. I don't know, I thought it would be un-cool So I made it work with Bluetooth receiver.
EastExpert said:
Man, my TomTom is version 6.010.
Just in case, it's available.
Click to expand...
Click to collapse
I know, but the old TT5 maps won't work with 6 and I've got quite a few that don't come with the Europe disk.
solution to tt gps connection problems
hi everyone with this problem,
no matter what your setup is vario, xda, dell, tt5 or tt6, tomtom gps or other GPS try this method (it does bloody work) :
STEP 1 : INSTALL TOMTOM5 OR TT6
You do this by copying the CAB files from the CDROM using JasJar or using SD card o any other way
STEP 2 : UPGRADE (THIS IS NOT ESSENTIAL, ONLY DO IT IF YOU HAVE A NON-HOKY COPY OF TT)
http://www.htcclub.net/storage/ppcupd510.rar
or just overwrite patched version of main executable file over original
also having this install on some vario 2 may also help BTHTools1100.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
this is hidden option but if you use this wisely you will take control over your GPS but in many cases this is reson why tt sometimes works sometimes doesn't.
Fire up a registry editor (eg http://www.freewareppc.com/utilities/phmregistryeditor.shtml )
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8. (optional: make it non secure if available)
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None, also you should pay attention to 3 tab and allow windows to manage it - for now, you don't really want Bill managing things as it is recipe for disaster.
4. Start TT and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5. (if you don't get the port go back one step and check 3 tab)
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.(and now is the right time untick 3 tab option and stop auto managing)
8. Finally start TT and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Congratulations
well, in case something didn't go well start from scratch - reset your software restore your registry and reinstall as much as you can get back to factory defaults using hard reset and etc.
I know this is is in bits available elsewhere but this is more complete and little bit more up to date, but there is still hundreds of people looking for this.
THE SUMMARY
I've spent many many days looking for solutions, registry and web and all sort of tools to solve this, but this method works the treat - and it does make perfect sense - I suspect the reason why this is such a problem is timeout. windows is not a good platform - and it is locked by ms and all sorts of legacy issues. Obvious reason is tt doesn't load quickly enough and and detecting correct port seem to an issue so if you follow instruction you will see that sulotion is guiding your software to speak with 3party hardware having windows in the middle
good luck
Paulius - Excellent instructions and they work just great.
However....For me it only works one time. By that I mean after I turn everything off and then want to use it another time - it again cannot see the GPS device - and I have to do all of the above again.
Do you know why the settings are not retained? Note; I have unticked the the stop auto managing option already.
Hope you can assist.
Paulius - Excellent instructions and they worked fine but only the first time unfortunately for me.
i.e the next time I want to use tomtom - i have to go through all of the above again as it cannot find the GPS again.
Have you come across this before. Note: I have done exactly everything you have instructed above
Tomtom loses GPS settings
Paulius - Excellent instructions and they worked fine but only the first time unfortunately for me.
i.e the next time I want to use tomtom - i have to go through all of the above again as it cannot find the GPS again.
Have you come across this before. Note: I have done exactly everything you have instructed above
I had the same problem.
Luckily I had a backup of my TomTom installation.
It all comes up to the navigator.cfg file inside the Navigator folder. I copied the old one over and did not enter TomTom's GPS Setup menu anymore.
All I did after flashing was to just pair my BT GPS receiver and start TomTom. One needs to wait 5 seconds or so after the main screen opens, until the GPS is found. Do not try to select the receiver in the settings menu!
This happend on both my devices (BA and UNIVERSAL) after installing a WM6 firmware WITH the GPS Manager in the Settings.
Cheers,
vma
Thanks VMA - I understand.
Did you setup an outgoing port though in Bluetooth?
reply to nsm
hi nsm, sorry it took this long to respond, I didn't know the solution to your problem.
However, after few gliches with my pda's I think I can add to the list of thing to go wrong.
First is WM itself sometimes causes problems - so before you do anything else turn it of and on again - it did happen to me in the middle of london and I come from Lithuania well, it can be good fun navigating through canary warf without gps - aim for tall buildings :-D or away from them.
Second is once you followed my original instruction do not go back to gps settings menu, because after this you will have to start again from begining.
Third - is do allow minute or few for gps to lock onto satellites - especially if you are in doors or between buildings. Once in Crete it was quite hard to find satellite signal because of a mountains and I had clear sky view to one direction - but as you drive especially bigger cars, metal body will block signal.
Fullproof recipe is to have two units, if possible for one of them use bluetooth separate gps module as this will allow you to place both gps unit and pda screen in ideal locations for satellite signal and driver.
Fourth - this is boring and can take a lot of time, but may resolve lots of weird issues. Follow my instructions and then you set your tomtom to use data transfer baud rate 4800, 9600 and etc do try all the options - from low to high rate, this means that every time you'll have to start again instructions from beginning. TT6 on some of my pda's prefers 56700, tt5 - 4800 and so on. give this some time explore all the settings.
And finally if you have stability issues check your pda memory limits - try not to push it to 90%+ on unit or memory car, best is to leave plenty on both, this may cause settings not to be saved and all sorts of bugs.
the practical advice is to keep selling and buying pdas till you find one which will do the job for you, Try ebay , but do check descriptions and guides and most important sellers rating! All pda, mda and nokia simbion phones I tried with enough effort will work but many many of them have issues with stability or are difficult to setup.
Hope this helps.
Good luck
i have been trying to use tomtom with lg ct810 incite. however no luck getting it to connect to internal gps. or any other program for that fact. does at&t lock gps to navigator somehome. any help would be appreciated
any help??
Without having the device (which almost noone here has), it's very difficult to help without a proper rom dump. With a rom dump help can be given.
If you're interested in dumping the rom and posting, here's info on how to do so:
http://forum.xda-developers.com/showthread.php?p=2919305
Navigation Software for the Incite.
I have not tried TOM-TOM but i have GarminXT5.0.20w woking while reading the internal GPS on it's own and I have Nav-N-Go's iGO8 working using Franson's GpsGate as a gateway between the internal GPS and the software.
and google maps tool "Locate Me" works fine on it's own with the internal GPS. NEVER change anything under "Start-Settings-System-External GPS"; that is unless you are trying to connect to any GPS other than the internal. I got the Garmin working on second install and it took 2 months for me to get a good version of iGO8 that wasn't laggy on my incite. It can't be too difficult since this is the first phone I ever owned that has an actual operating system.
Look here
Check out this thread in tha ATT wireless forum, and then find a copy of gps gate.
http://forums.wireless.att.com/cng/board/message?board.id=LG&message.id=30327
13blackwolf13 said:
I have not tried TOM-TOM but i have GarminXT5.0.20w woking while reading the internal GPS on it's own and I have Nav-N-Go's iGO8 working using Franson's GpsGate as a gateway between the internal GPS and the software.
and google maps tool "Locate Me" works fine on it's own with the internal GPS. NEVER change anything under "Start-Settings-System-External GPS"; that is unless you are trying to connect to any GPS other than the internal. I got the Garmin working on second install and it took 2 months for me to get a good version of iGO8 that wasn't laggy on my incite. It can't be too difficult since this is the first phone I ever owned that has an actual operating system.
Click to expand...
Click to collapse
Hi, I have a problem with Igo 8 on my LG Incite. It works fine for me when the phone is plugged in. When the phone is not plugged in, Igo8 doesn't respond to any touches. The screen goes black every time I run Igo8.
Could you share your experience with Igo8. I'd appreciate it.
Thank you.
I have the same problem with Igo8 on my LG incite?
haha20055, did you find the solution yet?
13blackwolf13, Can you give any hint?
Thanks
I own an Incite, subsidized from AT&T. The internal GPS works fine with Google Maps, as well as a geocaching program called WMMiniGPS.
I would like to use the GPS with Streets and Trips loaded on my laptop, but GPSgate on the PPC will not find my GPS port. I have version 2.5 of GPSgate, but it cannot detect anything.
I've read that other users have gotten GPSgate to work on the Incite. Am I missing something? Anyone know what COM port the GPS is on?
Nevermind. I forget to set the GPS to a virtual port through the control panel. It works fine now.
LG Incite GPS problem solved!
I got it working as well but only thanks to GPSGate. It took me some time to find a working serial for it but now it works like a charm. Google Maps works without it for some reason bypassing the GPS receiver lock. iGO8 was a little buggy first but the 14th version I installed worked ok finally It took me about a week to get everything set up.
In the end, I got them all working so if anyone is still having problems they can contact me and I will give them the solution good to go.
On the other hand, does anyone know if I can find a better ROM version? The original one is ok but a little sluggish right out of the box. Thanks
hi every1
i got gpsgate to work. does gpsgate use data on the start up because sometimes when i start gpsgate i see the data icon on the signal bar trying to connect. it connect a few a seconds with a G or a E on the signal bar than disappears. does that mean that gpsgate use data on the start up. i use stop data from lg incite forum and i know that i can not connect to medianet but when i start up gpsgate it looks like its connecting or connects because i get the G or the E on the signal bar. so any help will be appreciated
tia
i have garmin 5.0.0 w20 working on my incite
Problem solve for IGO8 on Incite Phone
I found the solution to the problem It require a line in the sys.txt file to specify the driver=GDI in the rawdisplay section.
[rawdisplay]
driver=GDI
Note: for Amigo use driver="GDI" in the system.ini in the save folder
help
hiii
I have a big trouble with this igo 8. Since I installed a software, it works well when I connect my lg to the computer(active syc. position) but when I did plug it off, software dosent open. if even it is open, dosen't respond touches on the screen. Please help I'm about to beat my mind((
tunceray said:
hiii
I have a big trouble with this igo 8. Since I installed a software, it works well when I connect my lg to the computer(active syc. position) but when I did plug it off, software dosent open. if even it is open, dosen't respond touches on the screen. Please help I'm about to beat my mind((
Click to expand...
Click to collapse
IT is screen refresh problem . use my solution posted above.
Always gps problems with lg Garmin work fine, except speed of running. iGO & Tom Tom still without success
about help
thanks. it worked. also while it was running , 3d arrow icon or 3d car icon dosent show up on the screen. Is there anyone to help about this issue.
LG Incite CT 810 with IGO8
Hi Dismass,
Can you show me how to set Port, Baud to make LG work with IGO8
Thanks so much
If you are using GPSGate you can do it from the settings of GPSGate. Mine automatically created virtual COM2 and iGO found it instantly. If yours didn't do that automatically go to settings and create a new virtual port, it's fairly user-friendly so you shouldn't have problems doing that. After that it is just a matter of starting iGO and pointing it to the port you created, baud rate doesn't seem to make any difference on mine btw. Let me know if you are still having problems after that.
footballfan said:
hi every1
i got gpsgate to work. does gpsgate use data on the start up because sometimes when i start gpsgate i see the data icon on the signal bar trying to connect. it connect a few a seconds with a G or a E on the signal bar than disappears. does that mean that gpsgate use data on the start up. i use stop data from lg incite forum and i know that i can not connect to medianet but when i start up gpsgate it looks like its connecting or connects because i get the G or the E on the signal bar. so any help will be appreciated
tia
Click to expand...
Click to collapse
GPSGate does not use a data connection, it just grabs the data coming from the gps receiver and sends it to a virtual port that it creates for other software to use simultaneously. The icons you see indicate the availability and signal strength of certain networks (EDGE, GPRS, etc.) although they've been kinda unreliable on mine so I stopped looking at those pretty soon after I got my phone.
Hi All, has anyone had any success in getting android devices such as the MK808B to work with external GPS devices such as the Prolific PL2303? Desperately trying to find a way to support it so that I may use one to make a car PC. So if anyone can help / advise me how to install drivers and get it recognised in copilot I would be extremely grateful. Thanks
Dave
hotrodder said:
Hi All, has anyone had any success in getting android devices such as the MK808B to work with external GPS devices such as the Prolific PL2303? Desperately trying to find a way to support it so that I may use one to make a car PC. So if anyone can help / advise me how to install drivers and get it recognised in copilot I would be extremely grateful. Thanks
Dave
Click to expand...
Click to collapse
Why not use a bluetooth GPS? £8 on ebay.
gloscherrybomb said:
Why not use a bluetooth GPS? £8 on ebay.
Click to expand...
Click to collapse
I did try this using my android phone and a few apps that share your phone GPS as a bluetooth GPS but couldnt get it recognized by copilot. Id definately be open to this if i can get it recognized in there. Currently im using an archos 80 G9 tablet as my car PC, but want to switch to this mini pc for better performance and a better mounting option for in the dash - so my aim is to get GPS and a HDMI / USB touchscreen (such as an egalax screen) working. Then its a go. Ill then probably turn my hand to application development (my day to day job) to come up with the best option user interface wise and will happily share all the information and software i develop with the community.
MK808B + CoPilot (GlobalSat BT-359)
I am able to use MK808B + CoPilot (GlobalSat BT-359) with the help of a mock GPS provider app (Blutooth GPS). GoogleMaps \ Sygic are both working perfect.
I am also looking for a HDMI/USB touch screen for it, any update on this?
hotrodder said:
I did try this using my android phone and a few apps that share your phone GPS as a bluetooth GPS but couldnt get it recognized by copilot. Id definately be open to this if i can get it recognized in there. Currently im using an archos 80 G9 tablet as my car PC, but want to switch to this mini pc for better performance and a better mounting option for in the dash - so my aim is to get GPS and a HDMI / USB touchscreen (such as an egalax screen) working. Then its a go. Ill then probably turn my hand to application development (my day to day job) to come up with the best option user interface wise and will happily share all the information and software i develop with the community.
Click to expand...
Click to collapse
I plan to get one of these once the GPS side of things is working, so ill crack on and try what you suggest. Thanks
http://www.ebay.co.uk/itm/110659968637?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Ok, got a copilot branded BT GPS device, and its recognised and seems to be working with some apps - but not the one i want the most, copilot. It just states its unable to register for GPS updates, which sucks!
hotrodder said:
Ok, got a copilot branded BT GPS device, and its recognised and seems to be working with some apps - but not the one i want the most, copilot. It just states its unable to register for GPS updates, which sucks!
Click to expand...
Click to collapse
I have one of these: http://www.amazon.com/Dual-Electron...p/B006M49G80/ref=sr_1_2?ie=UTF8&qid=136138107
I use it w/out issue w/Google Maps, so I'll drop co-pilot on and see how it works out.
The rest of my CarPC setup:
http://www.m3post.com/forums/showthread.php?t=806078
whats77inaname said:
I have one of these: http://www.amazon.com/Dual-Electron...p/B006M49G80/ref=sr_1_2?ie=UTF8&qid=136138107
I use it w/out issue w/Google Maps, so I'll drop co-pilot on and see how it works out.
The rest of my CarPC setup:
http://www.m3post.com/forums/showthread.php?t=806078
Click to expand...
Click to collapse
I contacted the makers of Co-pilot and they said they dont support external GPS receivers. I have both the bluetooth and USB receivers but I think for co-pilot to support them I'd need to get to be recognised as the inbuilt GPS receiver. Co-pilot tells me its unable to register for GPS requests - but other apps _seem_ to work, but currently all my testing is done on a PC monitor, so its hard to hit the road and see if its actually working. I currently have an archos G9 80 built into my Jag XK8 and im so pleased with the functionality - but not so much with the GPS support (can be hit and miss) and with the mounting. Prior to that i had a windows PC, but that was much worse of an installation.