Database Info

How can i????

I have a Cingular 8125 and i looked every were to update it to WM6 but i can find nothing can someone help me and go step by step cause when i go to install it when i press update to see the Ver. of my phone and the Rom i am updating it to i dont see the Rom ver. Why.
Thank You

LlamaLord said:
I have a Cingular 8125 and i looked every were to update it to WM6 but i can find nothing can someone help me and go step by step cause when i go to install it when i press update to see the Ver. of my phone and the Rom i am updating it to i dont see the Rom ver. Why.
Thank You
Click to expand...
Click to collapse
read the sticky´s VERY carefully!
http://forum.xda-developers.com/showthread.php?t=298613
good luck and read read read...!

Well, first of all please write your problem in the thread header. "how can i...?" is a little less information.
You can see your OS version choosing "settings", then the tab "System" and "About".
The ROM/IPL/SPL/Radio version will be shown at a boot of the device (2nd screen) with red letters.
To update, look here: http://forum.xda-developers.com/showthread.php?t=298613

Okay, I did this yesteday, so its fresh from my head Press the camera button and the on button to get it into bootloader and identify firstly if its G3 or G4. Mine was G3 which was great, but yours maybe G4 which is a lot more difficult. Then follow the sticky and you'll sort it.

I think i have a G3 but i dont know step G3.5 and G3.6 dont know if my Sim is locked or not i just got it so please help....
Trying to install WM6-V and when i go to install it u you see in the pic i don't see the Rom ver. why please help me
IPL:2.25
SPL:2.25
GSM:02.25.11
OS:2.25.11.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

LlamaLord said:
I think i have a G3 but i dont know step G3.5 and G3.6 dont know if my Sim is locked or not i just got it so please help....
IPL:2.25
SPL:2.25
GSM:02.25.11
OS:2.25.11.1
Click to expand...
Click to collapse
hi
u have a G3,if u got it just now and it's new and it must be running wm5.
than it's surely must be sim/cid locked.simple way to check if it's sim locked or unlocked is to replace ur present sim with any other sim of any other carrier.if it works then it's sim unlocked,otherwise it's locked.or the other way to check whether it's sim/cid locked or unlocked is to download WST Tool from the thread below,read very carefully and apply the tool :-
http://forum.xda-developers.com/showthread.php?t=329170
to unlock sim/cid, goto the following threads and read and read,u\ll find answers to all of ur questions here.go through all the guides there very carefully,when u fully understand and r confident,only then attempt to upgrade,goodluck
http://forum.xda-developers.com/forumdisplay.php?f=289

LlamaLord said:
I think i have a G3 but i dont know step G3.5 and G3.6 dont know if my Sim is locked or not i just got it so please help....
Trying to install WM6-V and when i go to install it u you see in the pic i don't see the Rom ver. why please help me
Click to expand...
Click to collapse
The image in the picture looks fine. Most of the ROMs you'll get here don't say what version of OS you're upgrading to on that screen.
If that's what you're sweating about, you shouldn't worry.
However, if you haven't CID unlocked yet, you're not going to get very far--most likely you'll see your same old OS once you've completed the upgrade.
I run XP, not Vista, so I'm not sure what complications will stem from that, but I wish you luck.

madmaso said:
The image in the picture looks fine. Most of the ROMs you'll get here don't say what version of OS you're upgrading to on that screen.
If that's what you're sweating about, you shouldn't worry.
However, if you haven't CID unlocked yet, you're not going to get very far--most likely you'll see your same old OS once you've completed the upgrade.
I run XP, not Vista, so I'm not sure what complications will stem from that, but I wish you luck.
Click to expand...
Click to collapse
Well i have a XP computer too that what i am useing to do all this on cuz Vista sucks with doing this stuff but my SIm card is unlock cuz i can call and stuff and i just got a new one but will i still have to unlock it?

@LlamaLord,
you sound like this guy: http://forum.xda-developers.com/showthread.php?t=333721
I mean the way you ask questions here all over different threads on this forum ...
So please read again and again the tutorials until you understand .. then it won't be a big deal ..
Regarding your question about "locked/unlocked" zabardast_1 already gave you the hint in post #6 how to check ..

Radio Flashing Tutorial (HELP)

Can one of you Gurus write a quick radio flashing tutorial, I've been reading and I can't seem to figure out where the radio flash fits into the equation.
The file for a radio flash is much smaller than the file for a ROM flash but when it is opened it appears that it would over write the ROM when installed through Hard SPL

Twenty views and no one knows the procedure to flash a radio?

theflash42 said:
Twenty views and no one knows the procedure to flash a radio?
Click to expand...
Click to collapse
I'm not even going to go into using the search.
Its the one of the stickies!
http://forum.xda-developers.com/showthread.php?t=356895

we3zy said:
I'm not even going to go into using the search.
Its the one of the stickies!
http://forum.xda-developers.com/showthread.php?t=356895
Click to expand...
Click to collapse
LOL do people even know how to read? I mean come on. Your posting twice and in that time you could have seen how to flash a radio.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

alltheway said:
LOL do people even know how to read? I mean come on. Your posting twice and in that time you could have seen how to flash a radio.
Click to expand...
Click to collapse
Anyone posting on a message board obviously can read. Thank You for the useless comment.
Thank you for the link, however I have seen the link posted via the stickied thread, before I made the post. It is WHY I made the post.
When the radio was flashing it went to 95% then froze into recovery mode and would not allow HardSPL to run and also would not reinstall the ROM. I ended up
reinstalling Duttys V4.
I wanted a quick tutorial to make sure I did every thing right and to determine what the cause of the freeze was so I don't brick my phone

Alltheway is right. Ok now I will go into the search function. That situation has been asked many times, and answered many times.
xda-developers. This board is starting to feel like "xda-techsupport.com" more and more everyday.

1. Download HardSPL v1: http://forum.xda-developers.com/showthread.php?t=334679
2. Install HardSPL: check persianowns Kaiser HardSPL Walkthrough Video http://www.youtube.com/watch?v=UaCt5pUn6iI
3. Download the Radio of Your choice: http://forum.xda-developers.com/showthread.php?t=349375
4. Install Radio: Just like installing a ROM or HardSPL double click on the Kaiser_RUU.exe file and follow the on sceen instructions.
5. Pat on the back! You are done!

we3zy said:
Alltheway is right. Ok now I will go into the search function. That situation has been asked many times, and answered many times.
xda-developers. This board is starting to feel like "xda-techsupport.com" more and more everyday.
Click to expand...
Click to collapse
Alltheway is right that I could have read the same thing again and hoped for a different result. Insane. At the same time that he is "right", he is equally foolish to come to the board and give a suggestion on how I could have made better use of my time. He clearly took time out of his day to host/post his Samuel Jackson GIF and think of such a witty bit of information to add along with it, when he could have simply explained the process involved.
The situation you are referring to that I could have searched about (install freeze), was already taken care of yesterday so Thanks.
ser00405, Thank You thats all that I needed. If the radio install show occur exactly like a ROM install, my process is correct and I believe that there is something wrong with the radio RAR.

stuck and cant hardspl

my kaiser is stuck on tri color bootloader, but its not hardspl.
i tried to flash again but i wont start, just stays at 0% and then an error apears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
what can i do?

First I do believe this is in the wrong forum. But I am rather new , I belive you should try FrakenKaiser but I have never had your problem, also did you unlock the phone first.

was this in the proccess of trying to flash HardSPL or trying to Flash a ROM?
Search, you'll find several Brick recovery threads

ynottry13 said:
First I do believe this is in the wrong forum. But I am rather new , I belive you should try FrakenKaiser but I have never had your problem, also did you unlock the phone first.
Click to expand...
Click to collapse
right forum, but wrong thread, shoudnt have started a new thread, should have asked this question in the proper thread!

msd24200 said:
right forum, but wrong thread, shoudnt have started a new thread, should have asked this question in the proper thread!
Click to expand...
Click to collapse
[side note to quoted user]I just now noticed that your location is one county to the west of my present location, at home in Owensboro for Christmas break from WKU.[/side note]
To The OP: any luck with this in other threads or just on your own?

@op:
download and flash your carrier's oem rom. You will recover fine. After wards first flash hardspl and than flash another rom.

Travito said:
[side note to quoted user]I just now noticed that your location is one county to the west of my present location, at home in Owensboro for Christmas break from WKU.[/side note]
To The OP: any luck with this in other threads or just on your own?
Click to expand...
Click to collapse
yuo gotta go to Evansville, IN shortly, and buy another crib, got another baby on the way, she will be here end of Feb. come on down help me get this thing loaded/unloaded/put together!

msd24200 said:
yuo gotta go to Evansville, IN shortly, and buy another crib, got another baby on the way, she will be here end of Feb. come on down help me get this thing loaded/unloaded/put together!
Click to expand...
Click to collapse
haha, not sure if i can be much help with that, not good at assembling things.

Travito said:
haha, not sure if i can be much help with that, not good at assembling things.
Click to expand...
Click to collapse
lol, just now got back the hard part was unloading that thing by myself, so what you going to WKU to be

RUU Update Utility Error 200. Help. Thank you :)

I fixed the kitchen errors. Now I have this to deal with. Yes my system is 100% updated and all the frameworks are installed. All the way up to .netframework 3.5 sp1. Please help me. Im using Windows XP SP3 32bit. Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

this is what I found.. hope it helps:
http://www.htcwiki.com/thread/68833...ool"+when+trying+to+do+firmware+update?t=anon

I can always try that. Stopping all applications does not seem like it would fix but I will try anything.

What's wrong with this one...
http://forum.xda-developers.com/attachment.php?attachmentid=53367&d=1191720558

Same error. Thanks though. You got my hopes up I was like YESSS its some special version that works!.....lol

Exact same error?? That is interesting. Definitely flashing a Kaiser, correct?? (you know, always have to ask the basic questions. )
Also, which kitchen are you using and what errors did you have? This error seems like your not HardSPL'd or there was an error with the deviceID or modelID. Hopefully, we can get you squared away.

lmao of course a kaiser =] Kareems kitchen and all the errors there i fixed on my own No my device is hardspl and all that good stuff. Idk what the deal is.

What were the issues that you fixed? How did you go about them? I looked at your other thread and from the screenshot it looked like you might have been missing visual c runtimes. Normally, you don't have to change anything with the kitchens (except for personalization). I suggest trying another kitchen (mbarvian has a nice one) and see how that goes.

My kitchen works fine. I just need to flash my roms to test. And I like my kitchen just fine =]

Btw. I installed updates for all the .net frameworks. Solved it.

TheParadox said:
Btw. I installed updates for all the .net frameworks. Solved it.
Click to expand...
Click to collapse
So you did get the 200 error fixed, correct? Just making sure. Or are you referring to how you fixed the other errors?

I fixed the KITCHEN errors. I still Have the 200 error with the RUU update utility. >.<

maybe you want to try a stock rom install with the oem kaiser ruu and see if you still get a similar error... not sure if you already tried that!

Stock ROMS do not install over a Hardspl device as far as I know. I dont want to do that either thanks though.

I'm going to keep searching for you. Hold tight.
EDIT:
whistler4ever said:
maybe you want to try a stock rom install with the oem kaiser ruu and see if you still get a similar error... not sure if you already tried that!
Click to expand...
Click to collapse
TheParadox said:
Stock ROMS do not install over a Hardspl device as far as I know. I dont want to do that either thanks though.
Click to expand...
Click to collapse
Actually, stock ROMs will still install on a HardSPL'd device. The HardSPL essentially disables the check that the update utility performs to make sure that the ROM is genuinely signed.
Trying to flash a stock ROM would be a good idea as well, or even a build that you have made that you know works and is flashable. This will help determine if it's a problem with the utility, or if there happened to be a wierd error whilst building your recent ROM.
EDIT #2: This is the only thing I could find relating to your specific error:
http://forum.xda-developers.com/showpost.php?p=1217789&postcount=58

Umm Alright. The error suggests it the utility. Hmm alright i may try a stock rom...keep searching thanks so much!!!!!

yeah, I figured trying to start another version different from the custom ruu will let you know whether its the utility or some missing dll's issue.
I don't mean to budge in since I don't know much about these things!

fixed. =]
length

TheParadox said:
fixed. =]
length
Click to expand...
Click to collapse
The length was the issue???

TheParadox said:
Stock ROMS do not install over a Hardspl device as far as I know. I dont want to do that either thanks though.
Click to expand...
Click to collapse
yes you can i do it all the time

Unrevoked Forever testers needed

We believe we are near ready to ship our incredible/evo solution to security off. Note this means you would have TRUE subradio level security off, and no matter what hboot/radio you flashed this would remain unless you purposely ran the command to reenable. We need a few people to help test slowly so we don't mass release and run into issues. We need folks at various levels of hboot/radio/rom, but the big thing is don't be afraid to loose your data or even brick. It's possible. Though we have not seen a permabrick yet from this. Truthfully, in the entire line of work we've done, there has only been ONE unrecoverable brick. And based on new knowledge that one might even have been fixable.
If interested, please join freenode channel #xxxxxxxxxxxxr to test... First 2-3 people only. Thanks!
EDIT: We are done for the night. It's looking good. We had 4 of 4 tests perfectly successful and rooted. Expect a full release soon unless something comes up! Stay tuned to http://www.unrevoked.com/forever

Sure i'll test

I'll help.
0002 with Toast method HBOOT/ROOT on OTA 2.2 Root'ed.

Why not. I'll test.
(CM6)

I'm, in PM me.. would love to give this a shot.
Sent From Your Grandmothers HTC Evo via Telepathic 4G

Sorry to the OP i had to go. Too many questions and its late for me. Sorry i'll test another time if possible.

I'll test if you still need ppl. (running fresh 2.2)

aldojr said:
Sorry to the OP i had to go. Too many questions and its late for me. Sorry i'll test another time if possible.
Click to expand...
Click to collapse
Thanks for letting me know! We wondered what happened to you.

tried to join but the channel is full

Here we go...brick it up kiesha!

Shadowmite said:
...unless you purposely ran the command to reenable.
Click to expand...
Click to collapse
1. I'm NOT a dev, but could sprint etc ever give an OTA which would run a script to reenable??
2. For the testers are you looking for unrooted users only? (I thought Matt said it would only work for those already unrooted.)
THANKS FOR ALL YOU GUYS DO!!!!

I'm down have two phones

so whats the word guys it would be nice to flash the ota and see the difference between stock and the roms so far

Will release soon

adeyo said:
1. I'm NOT a dev, but could sprint etc ever give an OTA which would run a script to reenable??
2. For the testers are you looking for unrooted users only? (I thought Matt said it would only work for those already unrooted.)
THANKS FOR ALL YOU GUYS DO!!!!
Click to expand...
Click to collapse
Good question, yes there is ONE thing that could reenable this. But I don't think they'd use it as it would mess up all true testing phones out on the market. And this requires a custom recovery that can run unsigned zip's. That's about it.

Thanks guys your work is amazing and WOW how easy can it get? MANY MANY MANY thanks this worked on my 2.1 rooted and was able to immediately upgrade to 2.2 without an issue with root of course.
And as well it work flawlessly on my already rooted and upgraded to 2.2 evo
WOOHOO!!! and here are a couple of pics for proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

question for those that are testers, once you flashed a custom rom did it keep the 1.4pri

Will this work with stock ota 2.2?
Htc Evil Phone

jblazea50 said:
question for those that are testers, once you flashed a custom rom did it keep the 1.4pri
Click to expand...
Click to collapse
Did not have the pri...
Phone must ALREADY be ROOTED so as far as I have read if you rooted you dont have the 1.4pri

I thought the PRI was tied to the Hboot though? If this actually installs the current stock Hboot (79.0000) shouldn't your PRI be 1.40?