Related
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Also tried to flash ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
But at 80% I get error..
ERROR [326] : INVALID COMMAND
This file cannot be used for your PDA Phone. Please check your NBF file
I had the same problem with my JAMin. I messed up trying to flash it with a home-made ROM and the tool used to build the ROM put two G4 SPLs instead of one G3 and one G4. This caused my G3 JAMin to have a G4 SPL. It wouldn't boot past the "rainbow screen" and the IPL and SPL levels were similar to what you have now.
The solution for me was to have it repaired under warranty :roll:
My charmer is still under problem.
Actually problem is that.. My phone is G3 chipset.. but someone flashed it with G4 flash files.
and Its spl and ipl is 2.xx.xxx and phone is detect as G4 chipset.. but phone is G3..
NOW ANYONE can guide me how I can write G3 Ipl/spl
waiting.
DrMobile said:
My charmer is still under problem.
Actually problem is that.. My phone is G3 chipset.. but someone flashed it with G4 flash files.
and Its spl and ipl is 2.xx.xxx and phone is detect as G4 chipset.. but phone is G3..
NOW ANYONE can guide me how I can write G3 Ipl/spl
waiting.
Click to expand...
Click to collapse
As I mentioned my JAMin was repaired under warranty. When it was returned to me they had replaced the main board. So it seems to be quite a problem to re-write the SPL if it has been flashed with the wrong type.
The new board has the G4 flash memory, so no more unlocking/downgrading adventures for me
DrMobile said:
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Click to expand...
Click to collapse
Extract the RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility_Wizard_NoID.exe") into this folder. than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
cross your fingers.
shayd said:
Extract the RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship to a folder on your pc, than Extract the file i attached ("ROMUpdateUtility_Wizard_NoID.exe") into this folder. than connect your charmer to pc and double click on "ROMUpdateUtility_Wizard_NoID.exe".
cross your fingers.
Click to expand...
Click to collapse
I allready tested your solution long time ago.. but its not working...
Br.
DrMobile said:
I allready tested your solution long time ago.. but its not working...
Br.
Click to expand...
Click to collapse
Have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" ? maybe this one wil work
DrMobile said:
I have an CHARMER PM200.
Its version was 2.xx.xxx.
Customer give that phone to some one to unlock.. and that person kill this phone..
Now its only SHOW three color screen and
IPL 2.06
SPL 2.15.0001
..
I tried to write ROM with T-Mobile RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship
But it give me error.
ERROR {296} : UPGRADE ONLY
This NBF file cannot be used for your PDA phone. please get new NBF file.
When I use JAFWM to flash above file its flash 100% but problem still same.
anyone know.. how I can revive this phone..
Br.
DrMobile
Click to expand...
Click to collapse
Dear DrMobile,
I am facing the exact same problem like you.
Same Model, Same IPL/SPL & same events.
Its like I wrote all this.
Its my request as whenever you find ANY SOLUTION, please please please do let me KNOW.
Waiting.......
Thanks in advance.
DoCtOr_X...
shayd said:
Have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" ? maybe this one wil work
Click to expand...
Click to collapse
Hi,
Yes You may be right, we need a ROM with only G3 IPL/SPL or only G3 SPL and if we can force this G3 SPL (I think JAFWM can do it but not sure) into the phone the problem will be solved.
But Question is where can we find this "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship" as it is not available on net, the file on FTP is corrupt.
"RUU_Charmer_2060227_20602110_021921_T-MobileUK_Ship" have both G3 & G4 IPL/SPL and when we write this ROM into phone it writes G4 IPL/SPL as Phone is detected having G4 by every software.
Otherwise the only option left is "JTAG" but only one guy (ARC but he lives in Russia) know the test points for Charmer.
I solved this problem before using JAFWM dongle
just uncheck skip ipl/spl and try flash
it will flash ur mobile with the correct IPL and SPL
mak_us1977 said:
I solved this problem before using JAFWM dongle
just uncheck skip ipl/spl and try flash
it will flash ur mobile with the correct IPL and SPL
Click to expand...
Click to collapse
Thanks for your Quick Reply, please tell us as which ROM version & which JAFWM version you used.
Thanks
i used rom JAMin_WWE_213923_2139123_022021 and JAFWM ver 2.2g
Thanks Man,
can u please confirm me that you had same problem of G4 SPl on G3 DOC.
Because JAFWM detects my phone as G4 DOC and the ROM you mentioned has both G3 & G4 SPL so I think It will try to write G4 SPL not G3.
sorry for the mentioned rom
this one not for charmer
just detect ur phone in JAFWM , chose the nk file for ur charmer , uncheck skip ipl/spl then flash
in that way i think ur mobile will be revived again
Can Any GURU Out There Help Us????????????
Just a SOS Messsage.
Can anyone out there help us out. Just wanted to write G3 SPL back to G3 Device (which is mistakenly written by G4 SPL)
Details
HTC Charmer (PM200) MSystem G3 DOC
IPL 2.06
SPL 2.15.0001 (its PM300 G4 SPL)
Device can enter bootloader and connect with USB. (means its not a brick yet)
Please Help.............................................
Will appreciate any kind of helpful suggestion, discussion.
Thanks
DoCtOr_X said:
Just a SOS Messsage.
Can anyone out there help us out. Just wanted to write G3 SPL back to G3 Device (which is mistakenly written by G4 SPL)
Details
HTC Charmer (PM200) MSystem G3 DOC
IPL 2.06
SPL 2.15.0001 (its PM300 G4 SPL)
Device can enter bootloader and connect with USB. (means its not a brick yet)
Please Help.............................................
Will appreciate any kind of helpful suggestion, discussion.
Thanks
Click to expand...
Click to collapse
have you tried to flash it with "RUU_Charmer_1120223_11202110_11220_T-MobileUK_Ship"???
i have uploaded it to here: http://savefile.com/files/157293
Thanks Shayd
First of all Thank u very very much as I was not hoping to get such favour from any one so Thank You Again.
Yes I did give it a try, its not working with the message that "please get a new NBF"
I hope someday I may be able to use my Charmer Again.............
JAFWM (whatever this is) is not working (as mak_us1977 mentioned)?
BTW, how do you know if your machine is G3 or G4? By looking if your unit is P200 or P300? And to confirm,
SPL 2.06.0001 only works on G3?
SPL 2.15.0001 only works on G4?
Want to put this on the Wiki to avoid future similar problems
Just Want to Know if U had SPL 2.xx.0001
mak_us1977 said:
sorry for the mentioned rom
this one not for charmer
just detect ur phone in JAFWM , chose the nk file for ur charmer , uncheck skip ipl/spl then flash
in that way i think ur mobile will be revived again
Click to expand...
Click to collapse
Dear mak....
Please let me know if you had SPL 2.xx.0001
This SPL is NASTY.
i updated my s200 with a crossbow rom and now its dead
the update was sucssfull but when i push the power button the screen fliker for les than one sec and that it
my s200 will not go even to bootloader
any ideas ?
http://forum.xda-developers.com/showthread.php?t=292667
what ipl/spl do you have?
i have a G3 idont it was 2.20 i think
plz check again if its 2.20 or 2.21 and hope that its 2.20^^
edit:
mh you have g3 ... try the solution out that i mentioned before and try the cid unlock from pdamobiz.com... then reflash an older rom with spl/ipl.
edit:
the pdambiz can only be flashed when you are in align screen... if you have 2.21 take a wizard rom and go into align screen with active sync connection and flash the cid unlock rom.
if you have 2.20 then just try another prophet rom out and see if it works...
my s200 already cid unlocked
alright here is that one:
RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.exe
sorry that its in german but its the only one I have right now... you can also change the language with some programm which is available here in the board..spl and ipl is included and it should downgrade you pda to 2.09
its an original shipped rom, they are always for g3 and g4 right? it doesn't say anything about that, anyways i used it on my g4 and it worked so you might wanna check out before as you have a g3 device, but I'm pretty sure it works for g3 and g4
so i maneged to get my s200 into bootloader
i now i have IPL 1.01 and SPL 1.01 but my device is G3
so i tried to flash RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe
and its start and when it reached 95% igot an error that says
"ERROR 326 ivalid command, the nfb file cannot be used with your pda phone
and one got and idea what to do ????
just now i tried to flash "RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.e xe" and it fail at the first time
so i tried again and it sucsess
and now my qtek work again
i am verey happy
thanks for your help
how did u manage to get into bootloader
hi,
um facing the same problem and can not reach the bootloader screen....how did u do so...
please help
I may have solution but I'm afraid to post it here, and one has the strength to test it.
it will writ the SPL using pdocwrit;, but I'm afraid cause when read the SPL it will have the same begining of the SPL in nk.nbf but after a while it will have diffreneces, but when I read the SPL using r2sd command it will have the smae SPL in nk.nbf
and I have harmless SPL solution it will have the same version 3.08 but it will be the same as 2.20 if anyone intrested in this please answer me
but he will use it at his own risk, and will not blame me for anything, he might brick his phone.
I'm willing to take the chances. SO, How do I go about it?
I am interested in downgrade spl 3.08 g4,since I do it,thanks I wait for its answer.
this will upgrade to version 3.09.
if done succefuly this new 3.09 has the same functions of 2.20 SPL
so if one has unlocked G3 with 3.08 and success to upgrade 3.09 (2.20) please try to unlock CID the device and to install the 2.20
and if it works with G4 device this 3.09 has the same funtions of 2.20 and the device will be again PM300
till working in pdocwrite I hope this will work for now
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
dear
I put my spalsh screen to make sure that you flash the new SPL
cause it will flash firt SPL then new splash screen and new HTC Logo in order.
did you get any error message? please tell me, what device model you have now?
danielalonso said:
I have already updated with paradis g4 spl 3.09 it but to me it continues leaving spl 3.08 and it changes to me 1 splash with your face
Click to expand...
Click to collapse
please if you need the old HTC Logo I'll attach it, but tell me did you have any error message?
what is the diference between 2.20 and 3.08,i mean functions?
the functions in 2.20 is for prophet hardware and 3.08 are for charmer hardware and there is of course defference between them
3.09 is for prophet hardware the same as 2.20 and you can stay with it for your prophet
I've seen slick **** here please reply, shall I let them flash SPL using pdocwrite
I have not received any mensage of error when flash my device PM320(htc s200) with paradis g4 only it appears to me in boot screen ipl 2.20 and spl 3.08
I have returned to flash my device with paradis g4 and to me it continues appearing spl 3,08 but now my device continues being pm320 tell me a solution if you know it, thanks. I feel my English I am Spanish
paradis i know that 3.08 is spl from charmer,but i don't understand why then someone ported it for prophet?what better i get with charmer spl?and what with prophet 2.20 spl?
i still have spl 3.08 saying on my G4,...
ok, I see, but strange if there is no error this should be SPL 3.09 with same functions of 2.20
I'll post soon the solution using pdocwrite, I'm at work now, but please hope that no one try it until we hear from slickdick the answer
waiting...
ok,it will hope to that you finish to the solution champion.
I already know how to write the spl using pdocwrite, but I'm afraid to post it
I need a reply from slickdick, it might brick your phone
pleasen read my first post, i don't have the strength to post it, even I know it will be your risk
give it a try man
I'll wait until Saturday if SlickDick didn't answer I'll post it, hope it will work
ok until Saturday then
I have a Qtek S200 G3 model.
A friend of mine was an idiot and flashed it with a G4 ROM.
Now all I see is the tri-color screen saying
IPL 2.10
SPL 2.20.0001
What can be done in order to restore this phone??
Please help??!!
Will no-one help??
RUU_Prophet_220734_2207114_024721_NVID.exe try to find this file
Tried this, but the flashing failed.
noonas said:
I have a Qtek S200 G3 model.
A friend of mine was an idiot and flashed it with a G4 ROM.
Now all I see is the tri-color screen saying
IPL 2.10
SPL 2.20.0001
What can be done in order to restore this phone??
Please help??!!
Click to expand...
Click to collapse
Probably you shouldn't have given it to your friend....There must be a fix somewhere.
I'd be asking your friend to find it. Good luck.
try this
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
It may not help with mixing the G3 and G4 up.....
I am afraid the phone is bricked, as i seem to remember from the time i had my Prophet, flashing with the wrong G type firmware cause an irrevirsible brickage as they are completley different chips on the actual device... someone had a "gold card" method they were researching but i dont think it really got anywhere!
mm the prohet is bricked im afraid. I have read many posts in the past in the prohet mobile 6 section, if you go through the posts and spend some time you will see the advice given to those unfortunate souls who did the same thing.....
Give them all a go, you have nothing to loose!
no problem
don't wory my frind i fixe my device and you can just try a rom with no VondorID they have 3 i fond in the forum the first don't work for me but the 2 work very well !!
don't wory don't wory don't wory
I'm just another one with a G4 bricked.. IPL/SPL 3.08.0001
was someone already able to patch or downgrade this bootloader?
thank you all!
i also have this same problem same ipl can anyone help? its my only phone
i also have this same problem . i want downgrade Spl
is there is any want know the to do that ?