Related
Hello
I Do Upgrade for my JAMIN with PDAMobiz_Prophet_WM5AKU3.2_v3220 & it was Succeed With out any trouble
Than I Try to upgrade to 2006-11-12_Prophet_WM5AKU2.3_lvsw_edition but my Phone Stack So I reset as say after 30 m (about 48m)
The Baggiest Problem for me after reset my Jamin Stack in Booting (Just show Rom Version & Other) after that noting Happen..
I tray to format But also same. I tray to boot from USB & Install Original ROM I get This Error
ERROR [296] UPGRADE ONLY
This NBF file connects used for your PDA Phone. Please get newer NBF file.
Is there any way to erase ROM and Re Upgrade with Old ROM
I Tray to Upgrade with Latest Update PDAMobiz_Prophet_WM5AKU3.2_v3231
But fail because this Upgrade required synchronization with Pc ..
Until now I lost Every Thing My Phone is Similar to Dead
Please help me
Please change your topic title so it makes sense!
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
mccune said:
Please change your topic title so it makes sense!
Click to expand...
Click to collapse
Sorry for my title ...
mccune said:
Second you should read before flashing your device... ...you havn't provide us with enough info, is your device CID unlocked? What SPL version do you have, do you have an G3 of G4 device?
Click to expand...
Click to collapse
I Don't know about CID
My SPL 1.2
My Device G3
mccune said:
Did you try to turn on your device and on the 3 color screen execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 again?
Click to expand...
Click to collapse
I did it & connect to usb but when i execute the PDAMobiz_Prophet_WM5AKU3.2_v3220 it's show me No Device Connect
Thanks for you
You had to CID unlock your phone first!
The only thing you can do I guess is install the NoVendorID Asia version for the Dopod.
You can't install the PDAMobiz ROM because there has to be an AS connection.
Try looking for: RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip on the XDA ftp.
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
wa7eed said:
Thanks
But Can you Tell me how to Unlock CID (What does mean CID?)
Click to expand...
Click to collapse
You should try to flash your device with the ROM mentioned before.
After that you can try to CID Unlock your phone:
Wiki for Prophet
The CID part
You're lucky you didn't brick your device
First Thanks for all
MY STORY
I try to flash my device with ROM RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID.zip and I was very happy because it’s start to flash ROM but after rich 95% it’s stop and show me Error INVALED COMMAND ... I tray many times but all same
Even my device now when ever I turn ON it’s go to boot loader mode
Correction my SPL 2.20
Just today I notice I write it wrong 1.2
Waiting for your reply...
Again Thanks
Thanks for you mccune so match for Help & all staff in this great forum already I restore my Live (I mean My Device)
I have to update to this ROM RUU_Prophet_220734_2207114_024721_NVID.exe
Thanks again for all
my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Wow!
Wizard bootloader in a prophet!
I bet you wont have the battery problem with a wizard's crossbow rom!
bootloader
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
alphazero said:
hehe hope so i will test but now i wont touch it again for a while! it was very hard work finding this out.
i would like to mention everything is a little slow at least i think it is compared to earlier. maybe im wrong but this could be the result of the 2.21 ipl and spl
Click to expand...
Click to collapse
maybe you can repair your bootloader now.
I have an idea of how you could do it with g3.
Is your cid locked?
Is your phone g3 or g4?
phone
its g4 xda neo cid locked
UPDATED NOW NEW TESTS DONE. IPL SPL = 2.21
if i use prophet roms now everything is slow on device not usuable. i have to use wizard roms LOL. only problem then no sound is working. but replacing dll from prophet gives u sound back again. ........ THIS IS ****ING BULL****. anyway its usuable again now. i flashed now the fucing pbootloader of wizard into my device..........................
Hardreset does not work anymore if holding camera and other button it goes again back to bootloader now i need to find out how u do a hard reset on wizard LOL.
anyway i need a IPL AND SPL From prophet ............... extracting ipl and spl from qtek prophet and traslating it making a new nbf results in a flash process but after i stays on old IPL SPL ....................... ill report soon more about this strage problem having a wizard bootloader on Prophet.
omg this is ****ing weird
that that works is really strange^^ thank you though again you rescued my device hope its gonna work for me I'll report in the next days...
so if I'm doing thats right the whole thing is working, while you are connecting the wires get don't plug the wall chargare in so you don't have elictricity and cover up the rest of the pins im not sure if thats necessary but you don't wanna brick your phone even more the phone is turning of though as soon as you disconnect the wires... i'm having a prophet rom on it right now i'm trying a wizard rom now...
alright im running the wizard aku 3.2 rom now. its working very well except that i have to wires coming out of the back of my pda.
but ipl downgrade might be possible from there... so thank ýou alot the solution works
your welcome
i will make a paypal account now so u can donate me i guess this solution is very good and no need to pay for it =)
UPDATE: IM NOW ON 2.26 TMOBILE WIZARD NOW WITH IPL AND SPL 2.26 THIS IS WORKING ****ING GOOD AND TRUST ME ITS FASTER THAN MY PROPHET WAS EARLIER WITH PROPHET BOOTLOADER.
GET THE TMO 2.26 from FTP and flash it. it will update ur device (IPL + SPL )too 2.26 never mind of it
IPL DOWNGRADE is NO PROBLEM FOR ME u can extract rom hex edit the ipl part and version number i did that already my ipl now is again to low number (custom) 2.01 but spl i coudnt find out to edit. im working with winhex and primary memory editing since this is very dangerous i dont suggest to do it. only experienced users should do that
WARNING WARNING WARNING !!!!
I WANT TO REPEAT AT THIS POINT AGAIN DONT TRY THIS ON WORKING DEVICE!!! ITS JUST A SOLUTION IF UR DEVICE IS ALREADY DEAD!!!!!!
alphazero said:
my prophet g4 device accidently flashed with 2.21 of wizard............
it was dead but now alive !!!!!!
cut of charger 2 wires inside. the + one (white) to pin1 of battery and the other wire to lowest pin 5. of the high voltage ur device will enter bootloader and stay in it !!!!!!!!!!!!!!!
connect usb cable and it will recognized =))))))))))))))
u can flash now to your earlier rom. in my case wwe 2.20 qtek rom with success. NOW device booting up again showing 2.21.0001 IPL AND SPL
but its working =))))))))))))
SO HAPPY !!!!! HOPE THIS WILL HELP U !
Click to expand...
Click to collapse
can u take a pic for the wires?
wires
NO need to i will explain in detail.
1. Take ur phone and put it on ur table =)
2. Turn it so u can see the camera
3. On the right u see 6 Pins.
4. The Pin 1 is nearest to Camera
5. Pin 5 would be far away from camera.
u got it now ?
it worked for me with the sixth pin to by the way but that might be why it doesn't work without the wires for me yet.
did you cover up the other pins alphazero?
you were able to flash a lower bootloader back onto the device right with some kind of hexedit application or something?
I think a lot of users would be glad if you could upload a rom that can downgrade the ipl and spl including me , as you said it requires a lot of skill to cook the right rom...
thanks man
Just a quick one. If you can downgrade the ipl and spl to 1.xx.0000 or 1.xx.0001, could it be possible to do CID unlocking?
Downgrade
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
alphazero said:
I could do compile a rom that downgrades ipl to whatever u want. the spl is coded and i need to find the place in a spl rom where version id is written.
i found out that the update rom process checks version id.
so theory is fooling of a lower rom a higher rom id. this means your downgrade rom will have a higher rom id.
im working on it right now. i have to do some test on university right now like many others please be patient.
Click to expand...
Click to collapse
Status: IPL DOWNGRADE OF ANY G4 successfull !
SPL DOWNAGE OF ANY G4 under work !
haha be patient and 2 minutes later you post it
spl 2.21 is working normally on the prophet anyway doesn't it?
can you upload that downgrade?
how is it coming ...did you find out anything new?
if you manage to downgrade ipl and spl to prophet version you are where you were before you flashed the wizard rom right?
answer
yes it would solve the accident wizard g4 rom flash on prophet!
but isnt spl on the prophet 2.21 anyways and only ipl is 2.15?
Dear Alphazero is it possible to solve wrong flashed g3 with jesterz g4 rom so now i can be only in bootloader mode and i can start flashing my prophet but please tell me how and what with On my bootloader screen now is written IPL 2.10 and SPL 2.20.0001. Please help me repair my prophet if it is possible
Should I do something with cutting battery pins?
uhm no the battery pins was because our device did only turn on if it was plugged into the charger, which meant you couldn't plug it into the usb at the same time to flash a new rom.
your problem is different and can't be solved with that solution... sorry sd goldcard i guess
Yes but i can only connect to mini usb and from bootloader i can flash it with battery full so please tell me shell i cut some pins from the battery and what with should i try to flash
Hi guys,
I've just implemented a Vox USPL which allows you to flash any Vox ROM updates, i.e. you can flash any *official* ROM even if your phone's model and vendor ID doesn't match. It's confirmed that you can also flash cooked ROMs
This SPL is based on original Vox 1.16 SPL but includes 3 patches:
1) g_cKeyCardSecurityLevel = 0 (set 32)
2) Does not check Model & Vendor ID
3) Does not check signature*
(*) code must be formally signed i.e. contain properly-formatted signatures on the right places, however no checking is performed against them.
This means you can flash ANY ROM to your Vox after running USPL on it, no need to pay for CID unlock anymore!
The USPL will *not* help you to SIM unlock your device. You still have to pay for that.
The USPL runs in RAM and is *not* flashed to your device, so there is no risk there. Once it runs you can run any official Vox ROM update utility.
The USPL does *not* permanently CID unlock your phone, like the CID unlocker from imei-check or so.
After you flashed a ROM your phone is again CID locked. Each time you wonna flash a ROM with a different model and/or vendor ID (different from your phone) or a cooked ROM, you must run the USPL again and then flash the ROM.
It's beta and untested and the risk is entirely yours !! Don't blame me if you brick your phone
EDIT:
You can now also flash the USPL allowing you to flash any unsigned (cooked ROM or ROM module, e.g. radio or OS) or signed ROM with any model/vendor ID. The USPL substitutes your SPL until you perform a full ROM update. Consider it as an extra insurance in case something goes wrong with flashing cooked ROMs or any other ROM update !
Instructions:
1. Run the USPL (Vox USPL- CID BYPASS.zip)
2. Run the ROMUpdateUtility.exe (Vox-USPL-RUU.zip)
Have fun,
JockyW
The attachments:
SDA_ApplicationUnlock.zip : application unlocker if u need it
mtty1.42.zip : terminal emulator (not neccessary if u only do ROM updates, but if you wonna play with the bootloader commands you need it)
Vox-USPL-RUU.zip: flash version of USPL (Note: you must first run USPL from "Vox USPL- CID BYPASS.zip" before you can flash it with ROMUpdateUtility.exe from Vox-USPL-RUU.zip !!!)
Vox USPL- CID BYPASS.zip : instructions included
Credits: in particular to pof. This USPL and also the one for Excalibur is based on his USPL for the Elf. See here
I think this is one of the most fantastic news of the century!!!
Finally some cooking can start on this little device.
Thanks again,
Ka.
noob question
what the difference between sim unlock and cid unlock?
This can be found in various threads around here, anyway.
SIM Lock - You can't use a SIM from a different provider than the one who sold you the phone.
CID-Lock - You can't flash your phone with a ROM which hasn't been cooked by your provider (or manufacturer for HTC unbranded phones).
Ka.
jockyw2001 great but make one for htc oxygen pls.
htc s710 - rom
confirm this is working very gd
thanks for all yoru help and support to this fourm
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
Same here
anyone online right now wanna drop me a line about this... what do I do exactly with the ruu file. Do I place rom image in that folder while runnning update???
so i followed the instructions and executed the cid bypass(installed itsutils and haret). once i get to the end it says use mtty or flash with RUU. so I attempt to flash right after (am I supposed to flash while the screen is black) but its gives me a connections error. I figure its because the phone is off. So I turn it on and update with the RUU again but only make it to 3% before I get a invalid vendor id. Would anyone care to comment on how I can flash this vox to the dopod rom...
madds said:
hi, i tried the method described and when it runs haret my vox shuts down... and nothing happens, i have to turn it on myself.
Click to expand...
Click to collapse
acid74 said:
Same here
Click to expand...
Click to collapse
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
neptune said:
To the users who had the same problem as me I am currently flashing my phone and I managed to get past my problem by using the SDA Application unlocker on my vox. I always thought that HTC were already application unlocked. Was going crazy for a while but I guess I should've followed the instructions step-by-step regardless of what I thought.
Big up to jockyw2001(and of course pof for without him alot of us would still be using shipped rom) for this wicked tool.
Cheers
Click to expand...
Click to collapse
Thanx man,last night i figured it out too......hows the dopod ROM??
acid74 said:
Thanx man,last night i figured it out too......hows the dopod ROM??
Click to expand...
Click to collapse
I only got this phone so I could upgrade it for a friend to stop the boot loop. It seems to have fixed that problem so I guess it's better than the other roms. On the other hand I can't stand smartphone's so my suggestion is to ditch your SP and switch to PPC . Also I read before hand that this ROM doesn't include Windows Live Messenger but it is included in the rom. Just thought I'd let u guys know.
input please
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
neptune said:
Just ran into another problem and would appreciate some input. I understand that USPL only works for one flash...but I wasn't aware that a hard reset counted as a flash. Regardless my device hung at the dopod boot screen after a hard reset. Is this normal after using USPL on a device, and if so does this occur with all devices??? I would hate to give a phone back and have to tell the person that they can't perform a hard reset...
Click to expand...
Click to collapse
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
jockyw2001 said:
If you flash a full ROM the SPL is overwritten with the one in the ROM (Dopod = 1.19). Nothing to do with USPL. Booting can take a long time after hard reset. Unplug battery and try again.
Click to expand...
Click to collapse
Thanks, I got it to work eventually...Good to know USPL doesn't effect hard resets, I guess you learn something new everyday.
If I had to take a guess before hand I'd figure a SP would boot faster than a PPC, but I realize now that I'd be wrong...
thanks to all for the help, I can finally return this Vox back to its owner
cheers
Hi
I flashed my E650 in French with the swissrom (present on FTP), all works !
an idea to change the logo operator to HTC original ?
thanks
thought I fixed the problem. seems as if after a day it just hangs at the dopod screen. It was working fine everytime I had it. As soon as I give it back it seems to hang. Guess ima just flash it back to the HTC rom, too much hassle for just $20.
why SDA_ApplicationUnlock.zip can't unlock my Orange SPV E650?
Successful rom flash done on a spv e650 on a sim unlock device UK orange
Hi,
I downloaded Official WM 6.1 Upgrade from HTC http://member.htc.com/downloadfiles....0_radio_sign_25.83.40.02_1.65.16.25_Ship.zip
and after running that... My system is dead slow and also unable to install few program like Schap's Advance Configurator etc and other issues like
System Reboot time increases....
GPS taking too much time for a Fix
Menu Pop down slowly...
Stucks quite often
.... And after every hour or so the Message popup like that " Please Inform Microsoft about this issue ...... "
Since i am not a computer Geek... Please advice some simple solution ...
Though i also download the official RUU from HTC which released on 21-2-08 but when i run that it tells me that " THIS UPDATE IS NOT FOR YOUR DEVICE " after the SPL screen...
So, is there anyway that i revert back to original System dated 28-8-07
Ur help in this would be highly appreciated....
And PLEASE accept my appologies is this issue has already been raised here...
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Thanks for the reply.....
thomassster said:
not sure what you mean by dead slow. First off, the warning that you get that the rom isn't for your device tells me you are not CID unlock. You can always CID unlock your phone and then put it back to the original SPL if you want to keep things back to normal.
Click to expand...
Click to collapse
Well it takes time to respond to the command... e.g. if i click on the START then it took quite a time for a menu to pop down....... as far as CID unlock... i am not sure....
But i purchased my tytn II from UK as a sim free unit @ 455 pounds... and before that WM 6.1 upgrade, i never played with the ROM or firmware... no SPL nothing anysort run on my unit.... I just run the RUU directly from PC and follow the on screen instructions....
which spl are you using ?
kuzco1 said:
which spl are you using ?
Click to expand...
Click to collapse
currently in Bootloader it shows...
KAIS130
SPL-3.28.0000
CPLD-8
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
ms2405 said:
i got elfin and i want to ask if it is any way to flash rom in bootloader mode,i want just to got my htc working again and my device is stucked at bootloader showing in right top corner RUU and on left IPL And SPL numbers.
Click to expand...
Click to collapse
hey, i just took a brief look in the elfin section. Go there and look at the stickies, there are guides for un bricking yoiur elfin and a good guide on how to correctly hardspl and flash....DO READ THEM (and you normally should flash a rom from bootloader in any case )
If you dont want to hardspl, then try the uspl way. You didnt say what rom you had tried to flash or wot you have done to get it stuck in bootloader.
Also are you using vista or xp on your computer?
i'm using xp on my comp,i got to bootloader because i tried to flash some roms and when i tried last time flashing onyx one it showed me error message and then started the problem.
ok, did u hard-spl sucessfully? what is you ips/spl shown on bootloader?
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
ms2405 said:
IPL is 2.26.0002
SPL is 2.26.0000 and as i said in right top corner RUU,
i've tried to flash it from sd card,but it ain't worked andlooked at goldcard method and i haven't got another winmo devic and don't know somebody who has,please help me to unbrick my phone,it was both from orange uk.
Click to expand...
Click to collapse
Please have a look at post 3 from here : http://forum.xda-developers.com/showthread.php?t=408637
Is this what you have tried doing previously?
Did you unlock your elfin first if it is locked on orange network?
If you cant get it working after trying this, go back to first link above and flash back an original stock rom, at least ur device will be working again!!
ps when u hardspl and tried to flash, did u disable antivirus on PC, and disconnect all other non essential usb devices? This is an commen cause of bad flashes, also try other usb ports, 2 of mine i cant flash on, 2 i can (which is wierd) - (i have experienced this myself).
If any of this doesnt help, as for help in the elfin section, but DO describe all your steps properly and fully and enclose links of roms tried etc so someone with an elfin can see what you have donw and save unnecassary posts etc.
mate,the link you gave me is that when i upgraded my elfin when it was working, i don't know what you mean about unlocked it is sim unlocked what about cid i really don't have idea,because i couldn't connect to mtty,please can you give me the link for original stock rom for my elfin,because i haven't done backup and i downloaded one but i don't know how to put in when i got in bootloader only and can't connect acivesync please tell me how to this aswell,PLEASE HELP ME UNBRICK MY ELFIN!!
Have you resolved this?
Search and download a stock rom from HTC or from here, use the search and wiki, you will find one there.
When you plug in ur elfin into the computer and put it in bootloader, do you see "USB" on the screen along with ur ipl and spl?
You should, and if you do you should be able to flash the stock rom on.