Hi guys !
I have my HTC Touch HD since a few days and using it in my Ford Mondeo, without any problem. But I just have one thing annoying me.
Each time i enter the car I have the "Ford Audio wants access to your contacts. Do you accept this? Y/N" message. Is it possible to setup somewhere that Ford Audio can access it all time without me losing time to get the phone out of the pocket to say yes each time i enter the car.
Thanks for your help !
Just found out by myself : the Ford Audio device has to use both Hands Free and Serial Port Profile. Apparently this works like a charm now.
Related
I searched and found this topic covered like 2 yrs ago but no one responded with an answer on that one so I'm going to try again.
I have a Verizon XV6800 (HTC Titan, Spring Mogul) and I'm working on connecting it to a PC that I will install into my car as a CarPC. Software is limited out there that work well with a PPC phone and is easily integrated into the front end im using on the PC. Bc of this I made a skin for the frontend that controls the phone using MyMobiler and I want the audio to come over the BT. I set it up using a Belkin BT Dongle and configured the Voice Gateway feature. It works good if I want to make a call, but when I receive a call it auto answers almost immediately. (less than 1 ring) I checked all the setting and auto answer is turned off all that.
The issue seems to me is that the PC and Phone don't make a connection until a call is started. So when I get an incoming call it then connects and I guess assumes im putting on a BT headset therefore I want to answer the phone... I need it to not auto answer... If i have the music on in the car i dont even hear it ring and before i know it someone is listening in on me in the car on the other end of the phone and i dont even realize it....
Any ideas on how to make it not auto answer? Maybe something in the registry? Or how to make it stay connected to the computer when im in range like it would if I had my headset on?
Thanks for any help!
Hey,
there is an app which can autoanswer / pickup calls...found it here:
com.patzapps.autoanswereasy
PHONECALLAUTOANSWER
market.android.com/details?id=com.patzapps.autoanswereasy
TRY IT
Greetz
TRY IT
Greetz
Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco
have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.
I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software
I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.
I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon
In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco
the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit
danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?
doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think
I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.
Hi everyone,
i wanted to know if there is any tip or solution to make my htc legend bluetooth identifiable permanently. I would like my stereo car connect automaticaly by bluetooth with my phone but it do not works automatically if the phone bluetooth is not identifiable... i would like to tick "identifiable" definitively and not for 120 seconds. any solutions? thanks very much
Once paired your head unit should do it as soon as you come into range? I know my cheap chines crap does!
unfortunatly not. but, as soon as I quote the identifiable case in the bluetooth option, my stereo car connect immediatly with my phone. that's why i wondering if there is any solution to hack the phone with adb shell or something like that witch force the bluetooth to be discovered all the time... how about your opinion?
pseudoman said:
Hi everyone,
i wanted to know if there is any tip or solution to make my htc legend bluetooth identifiable permanently. I would like my stereo car connect automaticaly by bluetooth with my phone but it do not works automatically if the phone bluetooth is not identifiable... i would like to tick "identifiable" definitively and not for 120 seconds. any solutions? thanks very much
Click to expand...
Click to collapse
flash a custom rom..u will find out that bt can be identifiable INFINITE..
please, what custom rom are you talking about? i have already one named Blayo 0.7 but i would like to try yours with infinite identifiable bluetooth !!! wow!
im using x10 mini pro and flash cm6..htc legend also have a cm6 right?so flash it. i think all the cm6 had the same configuration..
tested and.. still not work. i give up. thanks everybody
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Wondering the same. I tried Bluetooth to no avail.
+1 been trying to get some of the more talented guys on this because I would love this on my evo
Same here, my crappy TomTom can do it so why not tpad?
d94 said:
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Click to expand...
Click to collapse
Yes it can.
I have a se X10a rooted android 2.3.3 and I got it to connect. I may not have gotten the full features since I missed the pariing code and my phone must have sent a 0000 pair which was accepted.
Anyway, my phone says that there are two options, Connect and Phone audio. Incoming calls show up on the TP with the dialer interface including caller id right down to the state and country. Audio transferred properly, so the TP becomes a huge speaker phone. Outgoing calls can be dialed and my phone asks if it should use skype or the dialer (as its' set up that way), but this doesn't seem to be working totally as there is a fail message that shows up on the TP saying 'unable to connect' or 'dial directly from your phone' when using contacts. I was able to dial my Google Voice mailbox.
I had to go from WebOS to Other a few times to get it find the phone. Just selecting Scan wasn't enough. I have Uberkernal (the latest as of this date 9/10/11).
I was also able to connect my SE D980 stereo bt headset but it only recognized it as headset not a phone device. The unit has music track controls on it and they work fine with the standard Music app and don't work with the AudiophileHD app. Track forward and back, stop/start.
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
There's a precentral thread devoted to it: http://forums.precentral.net/hp-touchpad/295862-first-non-webos-phone-fully-tetherd-hp-touchpad.html
I was able to pair it with my Droid, but can only use the TouchPad as a bluetooth headset. I can also dial with the TouchPad, but I have to use the phone to activate the TouchPad as a headset.
omario31 said:
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
Click to expand...
Click to collapse
I've got a DHD as well but running MIUI V4. I wasn't expecting it to work but just messing around, I thought I'd pair it in WebOS and it worked without a problem. I can even make calls from the touchpad without touching my phone. It should pair as a headset normally. It didn't work with my LG KC910 though.
*EDIT*
My mistake. It paired and made calls with my LG, no problem at all. Nothing worked under Android though, just file transfers.
Sent from my TouchPad on CM9
Hi, I'm not able to transfert the phonebook from the phone to the Bluetooth car kit. It seems to start transfert but never end. Whit the Sensation and the same car kit no problem.
Any idea to risolve?
Do you click and allow the prompt on the phone to allow the phonebook connection to start, you only get this prompt the first time the devices connect after pairing. You may need to delete the pairing information and start again to see this prompt again!
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Same ty[e of problem with BT Car stereo
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Fairmile said:
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Click to expand...
Click to collapse
Interesting cause I have Sony DSX-S300BTX myself. if Bluetooth doesn't work on this, I will buy Galaxy Nexus instead. I stream music in my car most of the time.
I had a quite similar issue with a Seat Altea car. It was starting the sync, and arriving at 160 contacts it just hang.
I solved it by making some cleanup and by selecting only the required address book in thé htc contact list...
Sent from my HTC One S using XDA
nnvesp said:
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Click to expand...
Click to collapse
I am having exactly the same issue!
debabratadey said:
I am having exactly the same issue!
Click to expand...
Click to collapse
Me too with the built in bluetooth system in my Mitsubishi. Old HTC legend worked without any issues.
Any further solutions?
Thanks.