Database Info

Camera Version 3.00(build 21801)?

Is this new? my friends MDA Compact 2 (128mb of memory) has it, his pictures look better than ones taken with the 2.7 version aswell.
How do i go about stealing his camera software to test it on mine? :lol: which files do i need
-edit its the same phone as the mda compact its just black with more memory its not a new model phone

lol i only had the phone 5 mins and u robbin stuff from me allready lol :lol:

Ryanmt said:
Is this new? my friends MDA Compact 2 (128mb of memory) has it, his pictures look better than ones taken with the 2.7 version aswell.
How do i go about stealing his camera software to test it on mine? :lol: which files do i need
Click to expand...
Click to collapse
Mate,
Where can download the Ver 3.0(build 210801)

tell us how to get it off the phone and ill upload it!

u hv to hard reset the device 1st if u wan to get accessed to the ext rom.. so can u think of any way to make ur fren device hard reset....?

Hard resetting a friends device is always fun But if you don't really feel like it, you can just run the file windows/loadvdisk.exe instead, to gain access to the Extended_ROM folder. At least that's how it works on the Magician...

somebody needs to explain slowly, what exacly step by step does he need to do? Cheers

mayb u should use HBK method.. if there is loadvdisk.exe in the /windows directory of ur friend device.. after that u will c a folder named ext_ROM appear.. choose that folder n find for .cab file that u think that it sounds like camera file... gud luck

Hey,
How abt copying the exe file from windows folder and replace it to the older version exe.. Be sure to take a backup before replacing
Cheers..

Just copy the camera.exe from \windows to your desktop with Act.Sync & attach it to the board. No need for a cab, on the magician it's a single executable, proba. on the WM2005 version too. I doubt it will work on a magician under WM2003, but I'll give it a try!!!!

hes only got the upgraded mda compact its still running wm2003

so have u tried the method mentioned above to get the camera file?

WM2003SE is great news in this. Though I didn't notice major improvements in the camera builds between rom 1.12 & 1.13.
Maybe build 3.......?

any news???
greetings from berlin

yes! i transferd the camera.exe onto my phone and it doesnt work. It ajusts the brightness on the screen and rotates it but thats as far as it gets.
Just getting him to install resco to get the cab file

further update - he doesnt have loadvdisk on his.
we tried to copy over the dlls that go with the camera but neither resco or over activesync will let him do it... so were stuck!
-edit
weve got
camera.exe
CameraPictureDLL.dll
CameraVideoDLL.dll
he says theres no more camera related files on his, where as mine has camera_sensor.dll and one or two others.
ive coped these files over and it still does the same thing, rotates the screen ajusts the brightness then stops.
Im not gonna upload the files into this thread as i dont want cause confusion with people thinking its a working version (no matter how many times i say it doesnt work people will still asume it does!)
If anybody wants a copy of the files though pm me and ill give you a link

Loadvdisk.exe ia hidden-, system-, rom file. So get your settings correct.

??? how do i do that?

Ryanmt said:
??? how do i do that?
Click to expand...
Click to collapse
Try to rename that for example camera.ex_ , then it might be two files copy one of them which could copy or do soft reset & move your renamed camera.ex_ to as

Ryanmt.. b4 that try to look again for the resco explorer settings so that u can view all hidden files in the \windows dir.. after that locate the loadvdisk in the \windows n click it... after that a folder named Extended_ROM will appear.. try this 1st

Help for the Hermes Group!

In this thread we are looking at getting SMS notification of VM on an Orange M3100 working for WM6. It is mentioned that SMS notification is working for Orange M5000s running WM6 and so we are lookng to "steal" a copy of SMS_providers.dll from one.
Can anyone help by attaching it to the thread? Thanks in advance.

From Helmi's origional source

Getting SMS_Providers.dll Onto The Device
Hi, I've recently upgraded my SPV M3100 to WM6 using the HTC official rom, I've manage to get everything working but the Voicemail notifications which I believe the sms_providers.dll fixes.
Please could someone let me know how to get this file into my \windows directory. Whenever I try it I just get the following error:
Cannot Copy 'sms_provider': Access is denied.
Be certain that the there is enough from storage memory (there is), that the destination is not write-protected and tha the file is not currently in use.
What I'm Doing:
1. Placed the sms_providers.dll onto my storage card.
2. Run 'File Explorer' on the device.
3. Performed a 'Cut' on the sms_providers.dll (on storage card).
4. Navigated to \windows & performed a paste.
5. Clicked Yes to overwrite the current file.
6. Error as described above

Well it means that sms_providers.dll already exists in your \windows directory, and it is currently read only/write protected. You might want to try another File Manager program like Total Commander or Resco Explorer to work around it. But if it is part of the ROM, then there is no way you can over write it. You will have to include sms_providers.dll in your WM6 ROM via kitchen then reflash again.

Many thanks DaVince, Total Commander did its magic and moved the sms_providers.dll without winging, rebooted the phone and wallaaa, workin.
Here's a link for Total Commander if anyone else needs it.
Many thanks

Nice to hear you got your problems fixed.

Good news!JBED 3D mod by nhchy suports WM2003

extract to the sd.Then use resco explorer to import reg file.it can work on WM2003.
Thanks _IOI_ !
More info:
http://www.ioicn.com.cn/forum/viewthread.php?tid=247095&extra=&highlight=jbed&page=1

mpx200, wm2003, doesn't work. Says JBED is not a valid Windows CE application. Anydoby have it working on wn2003?
I doubt, but coul this happen because of Storage Card? No such folder, just Storage and Mounted Volume, neither seems to work.
Can't read chinese

Please, redownload new version from http://www.ioicn.com.cn/forum/viewthread.php?tid=247095&extra=&highlight=jbed&page=1

hello,
I downloaded
jbed0524 mod by nhchy.rar
JBED4M0524_4M.rar
and I got the same error message than eclipse2k

Can you upload in once more? I can't download from the link above... Please... The rom by Anton Kraynov is also uses JBED, but i can't extract it... Can someone help me?

Changing Default Keyboard Skin - WM6.1

Hi all,
I need some advice on doing something that was fairly easy to do in WM6.0 ROMs, which is changing the default keyboard skin by replacing the msim.96.dll.0409.mui file.
I've tried a number of WM6.1 ROMs and this does not work. The only way I have been able to get the .mui file working was to re-cook the ROM and using an OEM package. Even after I re-cook with a new keyboard skin and try to replace the .mui file it does not work. Very strange.
Any of the cooks out there have any ideas why this is? I did a reg. dump of a ROM with and without the keyboard OEM package but did not find anything specific that would show why this does not work.
Appreciate any feedback. I know this works without any issues in WM6.0 ROMs.
Thank you.

Don't know what your doing wrong buddy but most of the time you need to cook the new .mui file in like I always do and i have no issue with the WM6.1 roms ever using the grey keyboard that I always use in my roms. To get this straight your dumping the rom and then copying the new .mui file right over the old file if there is one at all then rebuilding the rom? that is the only way it will work you can't copy over it once you have rebuilt the rom it needs to be cooked in.

austinsnyc,
Thanks for the response.
If I cook the .mui file in a ROM it works fine. The problem is not being able to replace the file (even though the file is overwritten). I was able to do this in WM6.0 ROMs but it doesn't seem this is possible in WM6.1 ROMs and I just wanted to confirm it.
So if I dump, change file, re-cook, works fine. I guess I'll have to do that with any of the new WM6.1 ROMs I end up running.
Thanks again.

ecltech said:
Hi all,
I need some advice on doing something that was fairly easy to do in WM6.0 ROMs, which is changing the default keyboard skin by replacing the msim.96.dll.0409.mui file.
I've tried a number of WM6.1 ROMs and this does not work. The only way I have been able to get the .mui file working was to re-cook the ROM and using an OEM package. Even after I re-cook with a new keyboard skin and try to replace the .mui file it does not work. Very strange.
Any of the cooks out there have any ideas why this is? I did a reg. dump of a ROM with and without the keyboard OEM package but did not find anything specific that would show why this does not work.
Appreciate any feedback. I know this works without any issues in WM6.0 ROMs.
Thank you.
Click to expand...
Click to collapse
austinsnyc said:
Don't know what your doing wrong buddy but most of the time you need to cook the new .mui file in like I always do and i have no issue with the WM6.1 roms ever using the grey keyboard that I always use in my roms. To get this straight your dumping the rom and then copying the new .mui file right over the old file if there is one at all then rebuilding the rom? that is the only way it will work you can't copy over it once you have rebuilt the rom it needs to be cooked in.
Click to expand...
Click to collapse
Actually you can change it easily via cab install but you need to sign it first. You can try the attached cab, and here: http://forum.xda-developers.com/showpost.php?p=1610615&postcount=3 for other skin.

Try this. First import the attached Keyboard Cert registry file (use dotfred's task manager which does registry editing, or resco registry editor). Once you do that, you should be able to use the various keyboard cabs. I've attached one that has like 20 keyboard styles you can choose from (uses mortscript to do this). Choose the one you want, soft reset, and presto...

sakajati said:
Actually you can change it easily via cab install but you need to sign it first. You can try the attached cab, and here: http://forum.xda-developers.com/showpost.php?p=1610615&postcount=3 for other skin.
Click to expand...
Click to collapse
sakajati,
Works fine now. Thanks for the links.

mfrazz,
Thanks for the info also! Appreciate it.

MiniWeather for the VOX

Hey guys... just released a new chome weather version that should work with the VOX also. Can somebody give it a shot ?

I can't seem to get it to install,
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
I'm using version 3 of Zeeshee ROM.
Cheers,

Same for me! Same rom. Btw, both weather progs delete my clock icon and blackscreen is not possible to load. (mini with dr.gonzo 6.1 rom)

Everything works!
Extract from cab all files for Windows directory and place them into the device.
Delete this files from cab and save cab.
Modify cab working.

Works brilliant .. Thanks a lot keep it up ... i like the background on the pictures what you post there . it will be great if you send it as well . cheers

I'm being stupid here.
I still can't get it to work.
Can someone upload the modified cab please.
Thank you.

Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!

Excellent!
Thank you for posting.
Regards,

Anyone have a screen shot of what it looks like?

TabletGuru said:
Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!
Click to expand...
Click to collapse
Thank you it works perfect now.

Got it to work, sort of, so please help.
weather.yahoo.com gives me NLXX001 as code
Doesn't seem to do anything
(And so is c>f not working)
Are we still using weather.yahoo.com as source?

I had already installed the original MiniWeather on my on my vox (Orange E650) and all was OK except that in portrait mode the weather image didn't show on the clock tab whereas it did in portrait mode. So I decided to install the vox version to see if it would be fixed.
Unfortunately I've found that the files can't be copied over to the device's Windows folder because Resco says they already there as read-only files in ROM and therefore cannot be overwritten. So after installing the 1.0b CAB I get the following error when I initially select options:
Unknown command: "nu=timestamp"
Line 13(\program files\nrg\chomeminiweather\SetOptions.mscr):nu=TimeStamp()
Is there anything that can be done? Would the clock/weather Image have been fixed anyway? If not I'll revert to the previous version
Thanks and nice program !!!

can someoene post a home screen to show how this should look. Its messed up on mine i believe I get 2 panels - the first one works but the image is messed up. The second one says "forecast" but in there it just says "push centre button to update, push right softkey marked options to set your options"
I had trouble copying the two chome files to the windows directory - it said I didnt have permission to copy them.
can anyone assist ?

Frottage........ It sounds like you've had a similar problem to mine above.
If you can't copy the files over the install doesn't work properly.
I've reverted to the non-Vox version and all now seems OK on my Orange E650 with Dr.Gonzo's 5.2.19195 Rom

Try using the Resco Explorer trial to copy them across. It's because the files it's trying to replace are in ROM. Resco worked on my Dr. Gonzo E650.