Database Info

MMS on WM5.0 Himlaya Working! - Updated

** EDIT **
Aplogies for not crediting ncruz as the one who edited the original files and got this working in the first place!
As per his instructions, and to make everything a bit easier for everyone, I have updated the Himalaya cab file with his updated files
** EDIT **
Thanks to TofClock for the making the cab file! I've just taken his instructions and made them a little easier to follow, I hope he doesnt mind
The Arcsoft mms composer has been extracted from the Universal rom and a cab file was cerated to work with WM 5.0 Blueangel devices.
However this cab won't install on Himalaya devices.
This is because of the following two files
ArcMMS.dll cause the install stop wis message : bla bla bla not digitally signed bla bla bla
RcDll.dll cause the install stop and prompt to install in another place , and again , and again .
TofClock has created his own cab file (which I have now updated to ncruz newest versions) with all other files and reg settings ...
Attached to this post is are two RAR files containing a cab file and 2 dll files.
To install, follow these instructions :
1. Download Himalaya_WM5_MMS.part1.rar and Himalaya_WM5_MMS.part2.rar from this post.
2. Decompress the rar file on your PC using winrar or something similar
3. Soft reset your Himlaya
4. Copy RcDll.dll and ArcMMS.dll to your Windows directory on your Himalaya
5. Copy the cab file to your Himalaya and install it.
6. Soft-reset your device again
7. After this , go the messaging application. click on Inbox you should see a new account there called MMS.
If not click on Menu>Tools>New Account
Create a dummy email account (it doesn't matter what info you fill in, just make it up) but at the Account information select MMS as the account type and click next.
Then finish going through the account creation, again for the server information making anything up.
8. Once that is completed clock on Menu>MMS Configuration then click the servers tab.
9. From here fill in your operators server settings (remember to set it as default!) and enjoy MMS on WM5.0!!
Again thanks sooo much for everyone's hard work in getting this working, especially ncruz for the initial work and the BA cab and TofClock for making the Himalaya cab file.

Great, just another thing, thoose files aren't from universal.
First, thoose files are from MY POST, i've reshacked thoose files for qvga devices, so it really pisses me off when people take credits for things they don't to.
Second, at least use my latest rcdll.dll see my post at BA forum.
The one that's in THAT cab has some huge icons. and i have hacked it a little bit more.
Third, i've already resolved the problem of having to create the account by hand.
So, if you really want to do the thing right, get the cab at my post, open wincecab editor, remove rcdll.dll and arcmms.dll, install the cab, then copy the files you've just removed and copy them to \windows.
PS: you can check the original files from universal and see that they aren't the same.

everythin is done as explained before, and no mms account appears
please help me

THankssss
Working with WM2k5_1.60c.00WWE_XDA2_HIMALAYA

thanks mjames_84 for update the cab
GREAT THANKS to ncruz for your good job , without it , i never should made this cab

paketecuento -
Have you tried this previously using ncruz manual installation?
I had trouble with that method and once I tried it even after I used the cab file it wouldn't work I had to hard reset my device and do it again.
If you did try the manual install first then you may have to do the same, it certainly worked for me anyway.
As his cab file worked great once I had removed the two dll files and had done a hard reset.
Of course if you havn't tried the manual installation previously then it could be anything you might need to give more info on what ROM version you're using, software you have installed etc...

working 100%, once updated to 1.60c....

It's strange. On my device every time I try to install the cab file I get an error message while installing. I follow the instuctions as described...
Has anybody dealt with it?

Same problem here
Get a error when I start installing. Says that I should try a different location. I"ve tried my SD and PPC. Nothing works.

Download here

It's worked with my WM5V.1.60c!!!
But i use .dll files from mjames_84 and use .cab file from TofClock. I can send and recieve my MMS!!!
Thank you

I too tried mjames files and had problems.
However I also left mjames .dll files there deleted his cab file and used TofClocks' cab file and I now have working MMS.
Thanks all!

the dll in archive with my cab are same of mjames dll and ncruz dll , i've updated the rar

Hello, thank you for the great work!
But i have a problem, no way to getting it to send messages through Vodafone italy, i had already a Vodafone MMS connection setted up by my QTEK SD Configuration wizard (dloaded from dangaard site) which worked with WM 2003 but i have no way of getting it to work in WM 2005, i keep getting the error message that my mms has not been sent. Anyone can help me please?
Thank you very much
By the way, since i almost haven't any programming skill i have Eng/Ita translation skill ^_^, so if u are interested in translating the WM2005 ROM to ITA let me know, i can help ^_^

Hi overhere,
I did precies what you said at the top,
But when I want to start MMS I get an error about a bad cerificate or something like that... please help...
Klazimodo

It works !
Upgraded to wm 5.0 two days ago.
Installed as per instructions and my MMS's work like a charme.
Thanks guys 8)

Hi guys
I installed it, no problem with installation. Send mms, GPRS Monitor shows that the mms is sending but then I get a error that says unable to send.
What can the problem be?
Use WM5 1.60c and Radio 1.08
Thanks guys

dudes, Himalaya is ****ing full of those WMstuff, so will you people try to do something for ALPINE ?
Or XDA O2IIi ?

hi there
i am not able to install
i have xda2 win2005 1.60c
i downloaded both the rar files unrared these in two dif folders one is called part 1 and the other part2
then i softreset my xda
then i coppied dll files from part1 folder
then i try to install the cab file coopied from my pc to xda
i try to install on system
but message comes up says that MMS.... can not be install
am i doing something wrong here
and y there are two rar files containig the same files
PLZ help
Regards

its working now
thanx
regards
gugi

Missing Bluetooth Manager in spanish vodafone magician

Hi all, i have a problem, cannot use many bluetooth functions because my magician does not have btconnmanagerce.exe nor any bt dlls in \windows directory...
I tried to copy al bt*.* files from other pda to mine but it still gives me an error saying some dll is missing, i suppose this is because i don't have any registry entries for that new dll's or some of the necessary files...
Can anyone tell me how can I install this bt wizard? or tell me where to download the bt manager and utilities .cab installer from any extended rom? or any clues of how to install or transfer it from somewhere?
Thank you in advance...

i need button.exe of wm2005

i had installed a rom of wm2005 and that´s right, but when i install a demo of vito buttonmapper 4.0 i have a problem, i supose that this program replace the button.exe of the system, because when i remove this progam i don´t have the button.exe file !!!
i supose that this file is on the dir windows/AppButtons or on windows
can somebody give me this file ???
thanks

I RESOLVE it EDITING THE REGISTER. THANKS

Tom Tom 6 op Vox / S710??

Could someone please help me with this install...
I have the file "ttn.ppc.6.030.8320.cab", but the installation freezes...
Then I unpacked the cabfile, and copied the map to my storage card. I tried to run both "ttn" and "ttn2003" files within the "2577"-directory, but both installs won't work... who knows what to do??
Thanks!
Greetz Frank

Look in this thread.
http://forum.xda-developers.com/showthread.php?t=306187

I already replied on that thread, but no-one replies...

Forrest81 said:
I already replied on that thread, but no-one replies...
Click to expand...
Click to collapse
Then you maybe read the thread more carefully...
The way to install TomTom 6 on the HTC VOX is by extracting all the files from the cab, you can do this with a tool like WinCE CAB or something like that. Than you manually put all the files on your phone. That's how I got it to work!
Good Luck!
RvBCrS

I did...
I allready unpacked the .CAB file (with WinRAR, like I described im my first post) and copied the files to my storage card...
Is there a big difference in the unpacking-methods?
It won't work! Can there be a difference in the ROM version?
Mine is Windows Mobile 6 Standard, CE-version 5.2.1215 BETA
(build 17715.0.2.0)
Could you maybe send me the files, extracted from the cab file?
Thanks again!

Forrest81 said:
I did...
I allready unpacked the .CAB file (with WinRAR, like I described im my first post) and copied the files to my storage card...
Is there a big difference in the unpacking-methods?
It won't work! Can there be a difference in the ROM version?
Mine is Windows Mobile 6 Standard, CE-version 5.2.1215 BETA
(build 17715.0.2.0)
Could you maybe send me the files, extracted from the cab file?
Thanks again!
Click to expand...
Click to collapse
YES There is! you can't use WinRAR, it's a special cab.. use a tool made by OCP WinCE Cab Manager!

Oke, maybe that's the point...
I tried with WinCE CAB manager, but then I get an error, saying "The file being opened is not a valid Windows CE cabinet file".
Could you please send me your cab-file, or the data extracted from it? I would appreciate it very much....
Thanks!
Greets,
Frank

MiniWeather for the VOX

Hey guys... just released a new chome weather version that should work with the VOX also. Can somebody give it a shot ?

I can't seem to get it to install,
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
I'm using version 3 of Zeeshee ROM.
Cheers,

Same for me! Same rom. Btw, both weather progs delete my clock icon and blackscreen is not possible to load. (mini with dr.gonzo 6.1 rom)

Everything works!
Extract from cab all files for Windows directory and place them into the device.
Delete this files from cab and save cab.
Modify cab working.

Works brilliant .. Thanks a lot keep it up ... i like the background on the pictures what you post there . it will be great if you send it as well . cheers

I'm being stupid here.
I still can't get it to work.
Can someone upload the modified cab please.
Thank you.

Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!

Excellent!
Thank you for posting.
Regards,

Anyone have a screen shot of what it looks like?

TabletGuru said:
Unzip attached file.
Copy files from 'Windows' (archive) to 'Windows' (device).
Copy cab to device and run it.
Reboot.
Enjoy!
Click to expand...
Click to collapse
Thank you it works perfect now.

Got it to work, sort of, so please help.
weather.yahoo.com gives me NLXX001 as code
Doesn't seem to do anything
(And so is c>f not working)
Are we still using weather.yahoo.com as source?

I had already installed the original MiniWeather on my on my vox (Orange E650) and all was OK except that in portrait mode the weather image didn't show on the clock tab whereas it did in portrait mode. So I decided to install the vox version to see if it would be fixed.
Unfortunately I've found that the files can't be copied over to the device's Windows folder because Resco says they already there as read-only files in ROM and therefore cannot be overwritten. So after installing the 1.0b CAB I get the following error when I initially select options:
Unknown command: "nu=timestamp"
Line 13(\program files\nrg\chomeminiweather\SetOptions.mscr):nu=TimeStamp()
Is there anything that can be done? Would the clock/weather Image have been fixed anyway? If not I'll revert to the previous version
Thanks and nice program !!!

can someoene post a home screen to show how this should look. Its messed up on mine i believe I get 2 panels - the first one works but the image is messed up. The second one says "forecast" but in there it just says "push centre button to update, push right softkey marked options to set your options"
I had trouble copying the two chome files to the windows directory - it said I didnt have permission to copy them.
can anyone assist ?

Frottage........ It sounds like you've had a similar problem to mine above.
If you can't copy the files over the install doesn't work properly.
I've reverted to the non-Vox version and all now seems OK on my Orange E650 with Dr.Gonzo's 5.2.19195 Rom

Try using the Resco Explorer trial to copy them across. It's because the files it's trying to replace are in ROM. Resco worked on my Dr. Gonzo E650.